CBSE Class 12 Chemistry Electro Chemistry Questions

Class 12 Chemistry Practice Assignments: CBSE Class 12 Chemistry Electro Chemistry Questions

Access comprehensive school assignments for Unit 2 Electrochemistry using the CBSE Class 12 Chemistry Electro Chemistry Questions. Designed to align with the 2026-27 CBSE academic guidelines, these practice sets help Class 12 Chemistry students reinforce core concepts and improve their problem-solving accuracy.

Download Unit 2 Electrochemistry Assignment PDF with Solutions

View or download the dedicated CBSE Class 12 Chemistry Electro Chemistry Questions resource below. Engaging with these assignments under focused study conditions ensures continuous academic progress and mastery of the 2026-27 curriculum.

ELECTROCHEMISTRY

VSA QUESTIONS (1 - MARK QUESTIONS)

Question 1. What is a galvanic cell?
Answer: A galvanic cell is an electrochemical device that converts chemical energy of a spontaneous redox reaction into electrical energy.
In simple words: It is a device that uses chemical reactions to produce electricity.

Exam Tip: Always mention that the redox reaction in a galvanic cell must be spontaneous (\(\Delta G\) is negative).

 

Question 2. Give the cell representation for Daniell Cell.
Answer: Zn (s) | Zn\(^{2+}\) (aq) || Cu\(^{2+}\) (aq) | Cu (s)
In simple words: Write the oxidation half-cell on the left and the reduction half-cell on the right separated by a salt bridge represented by double vertical lines.

Exam Tip: Phase boundaries are denoted by single vertical lines (|) and the salt bridge by double vertical lines (||).

 

Question 3. Mention the purpose of salt-bridge placed between two half-cells of a galvanic cell?
Answer: The salt bridge completes the electrical circuit and maintains electrical neutrality in the two half-cells by preventing accumulation of charges.
In simple words: It connects the two halves of the cell and keeps the electrical charge balanced.

Exam Tip: Mention both functions (completing the circuit and maintaining electrical neutrality) to secure full marks.

 

Question 4. Give the condition for Daniell Cell in which there is no flow of electrons or current.
Answer: There is no flow of electrons or current when the external opposite potential applied to the cell becomes exactly equal to 1.1 V (the cell potential of Daniell cell).
In simple words: When the opposing external voltage matches the cell voltage, current stops flowing.

Exam Tip: Relate this condition to \(E_{\text{external}} = E_{\text{cell}}\), leading to zero current and chemical equilibrium.

 

Question 5. How is electrode potential different from cell potential?
Answer: Electrode potential is the potential difference between a single electrode and its electrolyte solution, whereas cell potential is the potential difference between two electrodes of a galvanic cell.
In simple words: Electrode potential belongs to one half-cell, while cell potential is the total voltage of the complete cell.

Exam Tip: Cell potential is the sum of oxidation potential of anode and reduction potential of cathode.

 

Question 6. Can you store zinc sulphate solution in a copper container? Give suitable reason. (\(E^\theta_{\text{Zn}^{2+}/\text{Zn}} = -0.76\text{ V}\), \(E^\theta_{\text{Cu}^{2+}/\text{Cu}} = 0.34\text{ V}\))
Answer: Yes, zinc sulphate solution can be stored in a copper container. Since the standard reduction potential of copper (\(0.34\text{ V}\)) is higher than that of zinc (\(-0.76\text{ V}\)), copper cannot oxidise zinc or displace zinc ions from the solution. No redox reaction will take place.
In simple words: Copper is less reactive than zinc, so it will not react with the zinc sulphate solution.

Exam Tip: Compare standard reduction potentials: a metal with a higher reduction potential cannot reduce the ions of a metal with a lower reduction potential.

 

Question 7. How does electrochemical series help us in predicting whether a redox reaction is feasible or not?
Answer: A redox reaction is feasible only if the standard cell potential (\(E^\theta_{\text{cell}}\)) calculated for the reaction is positive, which corresponds to a negative value of Gibbs free energy change (\(\Delta G^\theta\)).
In simple words: If the calculated standard cell voltage is positive, the reaction will happen spontaneously.

 

Question 8. Write Nernst equation for the electrode reaction. \(\text{M}^{n+}_{\text{(aq)}} + n\text{e}^- \rightarrow \text{M}_{\text{(s)}}\) at 298 K and 1 bar pressure.
Answer:
\(E_{\text{M}^{n+}/\text{M}} = E^\theta_{\text{M}^{n+}/\text{M}} - \frac{0.0591}{n} \log \left(\frac{1}{[\text{M}^{n+}]}\right)\)
In simple words: The Nernst equation calculates the actual potential of an electrode under non-standard conditions using concentration.

Exam Tip: Remember to substitute activity of pure solid metal as 1.

 

Question 10. List the two factors that influence the value of cell potential of a galvanic cell.
Answer: (1) Concentration of ions in the electrolyte solutions.
(2) Temperature at which the cell operates.
In simple words: Cell potential depends on how concentrated the solutions are and the operating temperature.

Exam Tip: Pressure is also a factor if gases are involved in the electrode reactions.

 

Question 11. How is equilibrium constant of a reaction related to standard cell potential?
Answer: The relationship is given by the equation: \(\log K = \frac{n E^\theta_{\text{cell}}}{0.0591}\) at 298 K.
In simple words: Standard cell potential is directly proportional to the logarithm of the equilibrium constant.

Exam Tip: This equation allows calculation of equilibrium constants for reactions that are difficult to measure directly.

 

Question 12. Write the relation between \(E^\theta_{\text{cell}}\) and equilibrium constant (\(K\)) of cell reaction.
Answer: \(\Delta G^\theta = -nFE^\theta_{\text{cell}} = -RT \ln K\), which can be written as \(E^\theta_{\text{cell}} = \frac{2.303 RT}{nF} \log K\).
In simple words: Standard cell potential is linked to the equilibrium constant via thermodynamic free energy.

Exam Tip: At 298 K, substitute constant values to get \(E^\theta_{\text{cell}} = \frac{0.0591}{n} \log K\).

 

Question 13. Define cell constant. Write the SI unit of cell constant.
Answer: Cell constant is defined as the ratio of the distance between the electrodes (\(l\)) to the cross-sectional area of the electrodes (\(A\)). Formula: \(G^* = \frac{l}{A}\). The SI unit of cell constant is \(\text{m}^{-1}\) (commonly expressed as \(\text{cm}^{-1}\)).
In simple words: Cell constant is a specific property of a conductivity cell determined by electrode distance and area, measured in \(\text{m}^{-1}\).

Exam Tip: Conductivity is calculated as the product of conductance and cell constant (\(\kappa = G \times G^*\)).

 

Question 14. How does specific conductance or conductivity of electrolytic solution vary with temperature?
Answer: The conductivity of an electrolytic solution increases with an increase in temperature because temperature rise decreases ionic solvation and viscosity, thereby increasing ionic mobility.
In simple words: Higher temperature makes ions move faster, increasing conductivity.

Exam Tip: Do not confuse electrolytic conductivity with metallic conductivity (which decreases with increasing temperature due to thermal vibrations).

 

Question 15. What is the SI unit of (i) Conductance; (ii) Conductivity.
Answer: (i) The SI unit of conductance is Siemens (S) or \(\text{ohm}^{-1}\) (or \(\Omega^{-1}\) or \(\text{S}\)).
(ii) The SI unit of conductivity is Siemens per metre (\(\text{S m}^{-1}\)), though commonly expressed as \(\text{S cm}^{-1}\).
In simple words: Conductance is measured in Siemens, and conductivity is Siemens per unit distance.

Exam Tip: Pay close attention to whether the question asks for SI units or practical units like \(\text{S cm}^{-1}\).

 

Question 16. Represent a concentration cell with a suitable example.
Answer: A concentration cell is a galvanic cell in which both electrodes are made of the same material and immersed in solutions of the same ions but at different concentrations.
Example: \(\text{Cu(s)} \mid \text{Cu}^{2+}(C_1) \parallel \text{Cu}^{2+}(C_2) \mid \text{Cu(s)} \text{ (where } C_2 > C_1\text{)}\)
In simple words: It is a cell where electricity is generated purely due to a difference in concentration between two identical half-cells.

 

Question 17. State one difference between a primary battery and secondary battery.
Answer: Primary batteries cannot be recharged and are discarded after use (e.g., dry cell), whereas secondary batteries can be recharged by passing current through them in the opposite direction and reused multiple times (e.g., lead storage battery).
In simple words: Primary batteries are use-and-throw, while secondary batteries are rechargeable.

Exam Tip: Reversibility of the cell reaction is the fundamental chemical difference.

 

Question 18. Galvanized iron does not corrode even if the coating of zinc is broken. Explain why? (Given: \(E^\circ_{\text{Fe}^{2+}/\text{Fe}} = -0.44\text{ V}\); \(E^\circ_{\text{Zn}^{2+}/\text{Zn}} = -0.76\text{ V}\))
Answer: Since zinc has a lower standard reduction potential (\(-0.76\text{ V}\)) than iron (\(-0.44\text{ V}\)), zinc acts as the anode and undergoes oxidation preferentially, protecting the underlying iron from rusting even when the protective layer is broken.
In simple words: Zinc corrodes in place of iron because it is more reactive.

Exam Tip: This is known as sacrificial protection or cathodic protection.

 

Question 19. Write the unit of Faraday constant.
Answer: Coulomb per mole (\(\text{C mol}^{-1}\)).
In simple words: It is measured in Coulombs per mole.

 

Question 20. Write the name of a chemical substance which is used to prevent corrosion.
Answer:
Answer: Bisphenol
In simple words: Bisphenol acts as an antioxidant and corrosion inhibitor.

Exam Tip: Bisphenol is commonly used as a rust preventive substance.

 

Question 21. Show is the direction of flow of electrons in the following cell: \(\text{Zn (s)} \mid \text{Zn}^{2+} \text{ (aq)} \parallel \text{Ag}^+ \text{ (aq)} \mid \text{Ag (s)}\)
Answer: Electrons flow from the Zinc electrode (anode) to the Silver electrode (cathode) through the external circuit.
In simple words: Electrons travel from Zinc to Silver through the external wire.

 

Question 22. Rusting of iron becomes quicker in saline water?
Answer: Saline water contains dissolved ions that increase the electrical conductivity of the aqueous medium formed on the iron surface, facilitating the electrochemical corrosion circuit and speeding up rusting.
In simple words: Salt water conducts electricity better, which speeds up the electrochemical rusting process.

Exam Tip: Electrolytes in water increase the rate of electrochemical reactions by lowering resistance.

 

Question 23. Two metals A and B have reduction potential values of \(-0.25\text{ V}\) and \(0.80\text{ V}\) respectively. Which of these will liberate hydrogen gas from dilute \(\text{H}_2\text{SO}_4\)?
Answer: Metal A with a reduction potential of \(-0.25\text{ V}\) will liberate hydrogen gas from dilute \(\text{H}_2\text{SO}_4\).
In simple words: Only metals with negative reduction potentials (placed above hydrogen in the electrochemical series) can displace hydrogen from acids.

Exam Tip: Metals with negative standard reduction potentials act as stronger reducing agents than hydrogen.

 

Question 24. Express the relation between conductivity and molar conductivity.
Answer: \(\Lambda_m = \frac{\kappa \times 1000}{C}\)
Where \(\Lambda_m\) = Molar conductivity, \(\kappa\) = Conductivity, and \(C\) = Concentration in mol L\(^{-1}\).
In simple words: Molar conductivity equals conductivity multiplied by 1000 divided by the concentration.

Exam Tip: Always verify units: if \(\kappa\) is in \(\text{S cm}^{-1}\) and concentration is in \(\text{mol L}^{-1}\), include the factor of 1000.

 

Question 25. Name the cell which was used in Apollo space programme.
Answer: Hydrogen-Oxygen fuel cell.
In simple words: The H2-O2 fuel cell provided electricity and drinking water in the Apollo space missions.

Exam Tip: Fuel cells produce electricity with high efficiency and generate water as a byproduct.

 

Question 26. How many faradays are required to oxidise 1 mole of \(\text{H}_2\text{O}\) to \(\text{O}_2\).
Answer:
Answer: 2F
Reaction: \(2\text{H}_2\text{O} \rightarrow \text{O}_2 + 4\text{H}^+ + 4\text{e}^-\)
For 2 moles of \(\text{H}_2\text{O}\), 4 Faradays are required. Therefore, for 1 mole of \(\text{H}_2\text{O}\), \(\frac{4}{2} = 2\) Faradays are required.
In simple words: 2 Faradays of charge are needed to oxidize 1 mole of water into oxygen.

Exam Tip: Set up the stoichiometric ratio from the balanced half-reaction to find the charge.

 

SA (I) TYPE QUESTIONS (2 - MARK QUESTIONS)

Question 1. List two points of difference between metallic conductance and electrolytic conductance.
Answer:
1. Metallic conduction is due to the movement of electrons, whereas electrolytic conduction is due to the movement of ions.
2. Metallic conduction decreases with an increase in temperature, whereas electrolytic conduction increases with an increase in temperature.
In simple words: Metals conduct via electrons and drop in conductivity with heat, while solutions conduct via ions and gain conductivity when heated.

Exam Tip: Keep comparisons sharp with clear headings or bullet points.

 

Question 2. List two points of difference between electrochemical cell and electrolytic cell.
Answer:
1. An electrochemical cell converts chemical energy into electrical energy, whereas an electrolytic cell converts electrical energy into chemical energy.
2. In an electrochemical cell, the anode is negative and cathode is positive. In an electrolytic cell, the anode is positive and cathode is negative.
In simple words: Electrochemical cells produce electricity from chemical reactions, while electrolytic cells use electricity to drive non-spontaneous reactions.

Exam Tip: Remember that reduction always occurs at the cathode and oxidation at the anode in both types of cells.

 

Question 3. List two factors which affect the conductivity of ionic solutions.
Answer:
1. Nature of the electrolyte (strong electrolytes dissociate completely and show high conductivity, whereas weak electrolytes dissociate partially).
2. Temperature (conductivity increases with an increase in temperature due to decreased viscosity and increased ionic mobility).
In simple words: Conductivity depends on how well the solute breaks into ions and the temperature of the solution.

 

Question 4. A conventional method of representing a Daniel cell is : \(\text{Zn (s)} \mid \text{Zn}^{2+} \text{ (1M)} \parallel \text{Cu}^{2+} \text{ (1M)} \mid \text{Cu (s)}\).
(i) Draw a diagram of the cell and mark anode and cathode as current is drawn from the cell.
(ii) Write the reactions taking place at the cathode and the anode during the operation of Daniel cell.
Answer:
(i) [Diagram description: Two half-cells connected by a salt bridge. Left beaker contains Zn rod in \(\text{ZnSO}_4\) solution (Anode, marked negative). Right beaker contains Cu rod in \(\text{CuSO}_4\) solution (Cathode, marked positive). External circuit connects the electrodes with a voltmeter or bulb, with electrons flowing from Zn to Cu.]
(ii) Anode reaction (Oxidation): \(\text{Zn (s)} \rightarrow \text{Zn}^{2+} \text{ (aq)} + 2\text{e}^-\)
Cathode reaction (Reduction): \(\text{Cu}^{2+} \text{ (aq)} + 2\text{e}^- \rightarrow \text{Cu (s)}\)
In simple words: Zinc dissolves at the negative anode, and copper deposits at the positive cathode.

Exam Tip: Always label the direction of electron flow from anode to cathode in your diagram.

 

Question 5. Suggest a method to determine the \(\Lambda^\circ_m\) value of water.
Answer: The molar conductivity at infinite dilution for water (\(\Lambda^\circ_m(\text{H}_2\text{O})\)) cannot be determined directly by extrapolation because water is a weak electrolyte. It can be calculated indirectly using Kohlrausch's law of independent migration of ions by combining the molar conductivities of strong electrolytes like \(\text{HCl}\), \(\text{NaOH}\), and \(\text{NaCl}\):
\(\Lambda^\circ_m(\text{H}_2\text{O}) = \Lambda^\circ_m(\text{HCl}) + \Lambda^\circ_m(\text{NaOH}) - \Lambda^\circ_m(\text{NaCl})\)
In simple words: Use Kohlrausch's law with strong electrolytes to indirectly calculate the limiting molar conductivity of water.

Exam Tip: This is a standard application of Kohlrausch's law for weak electrolytes.

 

Question 6. Write the cell reaction which occur in the lead storage battery (a) when the battery is in use (b) when the battery is on charging.
Answer:
(a) When in use (Discharging):
Anode: \(\text{Pb (s)} + \text{SO}_4^{2-} \text{ (aq)} \rightarrow \text{PbSO}_4 \text{ (s)} + 2\text{e}^-\)
Cathode: \(\text{PbO}_2 \text{ (s)} + \text{SO}_4^{2-} \text{ (aq)} + 4\text{H}^+ \text{ (aq)} + 2\text{e}^- \rightarrow \text{PbSO}_4 \text{ (s)} + 2\text{H}_2\text{O (l)}\)
Overall: \(\text{Pb (s)} + \text{PbO}_2 \text{ (s)} + 2\text{H}_2\text{SO}_4 \text{ (aq)} \rightarrow 2\text{PbSO}_4 \text{ (s)} + 2\text{H}_2\text{O (l)}\)
(b) When on charging (reverse of discharging):
\(2\text{PbSO}_4 \text{ (s)} + 2\text{H}_2\text{O (l)} \rightarrow \text{Pb (s)} + \text{PbO}_2 \text{ (s)} + 2\text{H}_2\text{SO}_4 \text{ (aq)}\)
In simple words: Discharging forms lead sulphate and water, while charging reverses the reaction back to lead, lead dioxide, and sulphuric acid.

Exam Tip: Clearly distinguish between the discharging and charging equations.

 

Question 7. Why absolute value of electrode potential cannot be determined?
Answer: An oxidation half-reaction cannot take place independently without a reduction half-reaction. Therefore, it is impossible to measure the absolute potential of a single electrode; only the difference in potential between two electrodes can be measured.
In simple words: You cannot measure a single electrode potential without completing the circuit with another reference electrode.

Exam Tip: Mention the Standard Hydrogen Electrode (SHE) as the reference assigned an arbitrary value of zero.

 

Question 8. Account for the fact that when chlorine is passed through a fluoride solution, no reaction takes place. (Given \(E^\theta_{\text{F}_2/\text{F}^-} = 2.87\text{ V}\); \(E^\theta_{\text{Cl}_2/\text{Cl}^-} = 1.36\text{ V}\))
Answer: Fluorine has a much higher standard reduction potential (\(2.87\text{ V}\)) than chlorine (\(1.36\text{ V}\)). Therefore, chlorine cannot oxidise fluoride ions (\(\text{F}^-\)) to fluorine gas (\(\text{F}_2\)). The calculated cell potential for this reaction would be negative, making it non-feasible.
In simple words: Chlorine is a weaker oxidizing agent than fluorine, so it cannot displace fluorine from fluoride solutions.

 

Question 9. Copper does not dissolve in \(\text{HCl (aq)}\) but dissolves in \(\text{HNO}_3 \text{ (aq)}\) producing \(\text{Cu}^{2+}\) ions. Explain the difference in behaviour. (Given \(E^\theta_{\text{Cu}^{2+}/\text{Cu}} = 0.34\text{ V}\); \(E^\theta_{\text{Cl}_2/\text{Cl}^-} = 1.36\text{ V}\); \(\text{NO}_3^- + 4\text{H}^+ + 3\text{e}^- \rightarrow \text{NO (g)} + 2\text{H}_2\text{O}, E^\theta = 0.97\text{ V}\))
Answer: Hydrochloric acid (\(\text{HCl}\)) cannot oxidize copper because copper has a positive reduction potential and hydrogen ions cannot oxidize it (\(E^\theta_{\text{cell}}\) is negative). Nitric acid (\(\text{HNO}_3\)), however, contains nitrate ions which act as a stronger oxidizing agent in the presence of acid (\(E^\theta = 0.97\text{ V}\)), yielding a positive standard cell potential that dissolves copper.
In simple words: Nitric acid acts as a powerful oxidizing agent that oxidizes copper, whereas hydrochloric acid does not.

Exam Tip: Always evaluate the cell potential of the reaction with the acid's oxidizing species.

 

Question 10. Explain the following observations:
(a) The product of electrolysis of molten NaCl are sodium metal and chlorine gas.
(b) The product of electrolysis of aqueous sodium chloride solution are \(\text{NaOH}\), \(\text{Cl}_2\) and \(\text{H}_2\).
Answer:
(a) In molten \(\text{NaCl}\), only \(\text{Na}^+\) and \(\text{Cl}^-\) ions are present. \(\text{Na}^+\) gets reduced at the cathode to form sodium metal, and \(\text{Cl}^-\) gets oxidized at the anode to form chlorine gas.
(b) In aqueous \(\text{NaCl}\), \(\text{H}^+\) ions (from water) have a higher reduction potential than \(\text{Na}^+\) ions, so hydrogen gas is liberated at the cathode instead of sodium. At the anode, chloride ions are oxidized to chlorine gas, leaving \(\text{Na}^+\) and \(\text{OH}^-\) ions in solution to form \(\text{NaOH}\).
In simple words: Molten salt gives pure metal and chlorine, while aqueous salt solution gives hydrogen gas, chlorine gas, and sodium hydroxide due to water involvement.

Exam Tip: Mention competitive discharge potentials at electrodes for aqueous solutions.

 

Question 11. What are fuel cells? Describe the principle and overall reaction involved in the working of hydrogen-oxygen fuel cell or \(\text{CH}_3\text{OH} - \text{O}_2\) fuel cell.
Answer: Fuel cells are galvanic cells designed to convert the chemical energy of fuels directly into electrical energy continuously as long as reactants are supplied.
Principle: Combustion energy of fuels like hydrogen or methanol is converted into electrical energy via redox reactions without thermal combustion.
Overall reaction for Hydrogen-Oxygen fuel cell:
\(2\text{H}_2\text{(g)} + \text{O}_2\text{(g)} \rightarrow 2\text{H}_2\text{O(l)}\)
In simple words: Fuel cells generate electricity directly from fuels like hydrogen and oxygen with high efficiency.

 

Question 12. Explain the meaning of the terms
(a) Ionic mobility. (b) Overvoltage.
Answer:
(a) Ionic mobility: It is defined as the velocity of an ion per unit potential gradient. SI unit is \(\text{m}^2 \text{V}^{-1} \text{s}^{-1}\).
(b) Overvoltage: It is the extra potential (voltage) over the thermodynamic standard reduction potential that is required to force an electrolysis reaction to occur at a significant rate, commonly observed in gas evolution reactions.
In simple words: Ionic mobility measures how fast an ion moves in an electric field, and overvoltage is the extra voltage needed to make certain sluggish electrode reactions happen.

Exam Tip: Overvoltage is frequently observed during the electrolysis of water yielding oxygen and hydrogen.

 

Question 13. Some standard reduction potential are as given below:
Half Cell | \(E^\theta\) Value
\(\text{F}_2/\text{F}^-\) | \(2.9\text{ V}\)
\(\text{Ag}^+/\text{Ag}\) | \(0.8\text{ V}\)
\(\text{Cu}^+/\text{Cu}\) | \(0.5\text{ V}\)
\(\text{Fe}^{2+}/\text{Fe}\) | \(-0.4\text{ V}\)
\(\text{Na}^+/\text{Na}\) | \(-2.7\text{ V}\)
\(\text{K}^+/\text{K}\) | \(-2.9\text{ V}\)
(a) Arrange oxidising agents in order of increasing strength.
(b) Which of these oxidising agents will oxidise \(\text{Cu}\) to \(\text{Cu}^+\) under standard conditions?
Answer:
(a) Oxidizing strength increases with an increase in standard reduction potential:
\(\text{K}^+ < \text{Na}^+ < \text{Fe}^{2+} < \text{Cu}^+ < \text{Ag}^+ < \text{F}_2\)
(b) Any oxidizing agent with a higher reduction potential than \(\text{Cu}^+/\text{Cu}\) (\(0.5\text{ V}\)) will oxidize Cu to \(\text{Cu}^+\). These are \(\text{Ag}^+\) and \(\text{F}_2\).
In simple words: Higher reduction potential means stronger oxidizing power. Therefore, \(\text{Ag}^+\) and \(\text{F}_2\) can oxidize copper.

Exam Tip: Higher standard reduction potential = stronger oxidizing agent = weaker reducing agent.

 

Question 14. Account for the following observations:
(a) In a dry cell, the build up of ammonia around the carbon cathode should disrupt the electric current, but in practice this does not happen.
(b) Ordinary dry cells are not rechargeable.
Answer:
(a) The ammonia gas produced at the cathode reacts with zinc chloride (\(\text{ZnCl}_2\)) present in the electrolyte paste to form a complex compound \([\text{Zn}(NH_3)_2\text{Cl}_2]\), preventing the accumulation of ammonia gas.
(b) The chemical reactions occurring during discharge in an ordinary dry cell are irreversible, so they cannot be reversed by passing an external current.
In simple words: Ammonia is trapped by forming a complex so it doesn't block the current, and the cell is non-rechargeable because its chemical reactions are irreversible.

Exam Tip: Note the specific zinc-ammonia complex formed in dry cells.

 

Question 15. The following figure shows two electrolytic cells connected in series.
(a) How much electricity is required for the reduction of 1 mole of \(\text{Ag}^+\) ions to Ag?
(b) If three faradays of electricity is passed through these cells, what is the ratio of cations \(\text{Ag}^+\) and \(\text{Cu}^{2+}\) deposited on cathodes?
Answer:
(a) Reaction: \(\text{Ag}^+ + \text{e}^- \rightarrow \text{Ag}\). 1 Faraday (1F) of electricity is required for 1 mole of \(\text{Ag}^+\).
(b) According to Faraday's second law, when the same quantity of electricity (3F) is passed through cells in series, the mass of metal deposited is proportional to its equivalent weight, or equivalently, the moles of electrons determine deposition: 3 moles of electrons deposit 3 moles of Ag (\(n=1\)) and 1.5 moles of Cu (\(n=2\)). The ratio of moles of \(\text{Ag}^+\) to \(\text{Cu}^{2+}\) deposited is \(3 : 1.5 = 2 : 1\).
In simple words: 1 Faraday reduces 1 mole of silver ions, and passing 3 Faradays deposits silver and copper in a 2:1 ratio.

Exam Tip: Use Faraday's laws of electrolysis and valence factors for cation deposition ratios.

 

Question 16. You are aquainted with the construction and working of a lead storage battery. Give the plausible reasons for these facts.
(a) There is only a single compartment unlike other electrochemical cells which have two compartments
(b) Addition of water is necessary from time to time for maintenance
Answer:
(a) Both the anode (lead) and cathode (lead dioxide) are insoluble solids immersed in the same sulphuric acid electrolyte, so a salt bridge or separate compartments are not required to prevent spontaneous mixing.
(b) During the discharge and charging cycles, water is consumed and produced, and evaporation also occurs, necessitating the periodic addition of distilled water to maintain the correct acid concentration.
In simple words: Since both electrodes are solid and immersed in the same acid, a single compartment suffices, and water must be replenished due to consumption and evaporation.

Exam Tip: Focus on the physical state of the electrode reactants in lead storage batteries.

 

SA (II) TYPE QUESTIONS (3 - MARK QUESTIONS)

Question 1. Using the standard electrode potential, predict the reaction, If any that occurs between the following:
(a) \(\text{Fe}^{3+} \text{ (aq)}\) and \(\text{I}^- \text{ (aq)}, E^\circ_{\text{Fe}^{3+}/\text{Fe}^{2+}} = 0.77\text{ V}; E^\circ_{\text{I}_2/2\text{I}^-} = 0.54\text{ V}\)
(b) \(\text{Fe}^{3+} \text{ (aq)}\) and \(\text{Br}^- \text{ (aq)}, E^\circ_{\text{Fe}^{3+}/\text{Fe}^{2+}} = 0.77\text{ V}; E^\circ_{\text{Br}_2/2\text{Br}^-} = 1.07\text{ V}\)
(c) \(\text{Ag}^+ \text{ (aq)}\) and \(\text{Cu (s)}, E^\circ_{\text{Cu}^{2+}/\text{Cu}} = 0.34\text{ V}; E^\circ_{\text{Ag}^+/\text{Ag}} = 0.80\text{ V}\)
Answer:
(a) \(E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = 0.77 - 0.54 = +0.23\text{ V}\). Since \(E^\circ_{\text{cell}}\) is positive, the reaction is feasible: \(2\text{Fe}^{3+} + 2\text{I}^- \rightarrow 2\text{Fe}^{2+} + \text{I}_2\).
(b) \(E^\circ_{\text{cell}} = 0.77 - 1.07 = -0.30\text{ V}\). Since \(E^\circ_{\text{cell}}\) is negative, no reaction takes place.
(c) \(E^\circ_{\text{cell}} = 0.80 - 0.34 = +0.46\text{ V}\). Since \(E^\circ_{\text{cell}}\) is positive, the reaction is feasible: \(\text{Cu (s)} + 2\text{Ag}^+ \text{ (aq)} \rightarrow \text{Cu}^{2+} \text{ (aq)} + 2\text{Ag (s)}\).
In simple words: A reaction occurs only if the calculated standard cell potential is positive.

Exam Tip: Always calculate \(E^\circ_{\text{cell}} = E^\circ_{\text{reduction}} - E^\circ_{\text{oxidation}}\); positive values indicate spontaneity.

 

Question 2. State the relationship amongst cell constant of a cell, resistance of the solution in the cell and conductivity of the solution. How is molar conductivity of a solute related to conductivity of its solution?
Answer: The relationship is given by: \(\kappa = \frac{G^*}{R}\)
Where \(\kappa\) = conductivity, \(G^*\) = cell constant, and \(R\) = resistance.
Molar conductivity (\(\Lambda_m\)) is related to conductivity (\(\kappa\)) by: \(\Lambda_m = \frac{\kappa \times 1000}{C}\), where \(C\) is concentration in mol L\(^{-1}\).
In simple words: Conductivity equals the cell constant divided by resistance, and molar conductivity is derived from conductivity and concentration.

Exam Tip: Memorize these fundamental electrochemical formulas as they form the basis of numerical problems.

 

Question 3. Describe the composition of anode and cathode in a mercury cell. Write the electrode reactions for this cell. Why does it provide constant voltage throughout its life?
Answer:
Anode: Zinc-mercury amalgam (\(\text{Zn(Hg)}\)).
Cathode: Paste of mercuric oxide (\(\text{HgO}\)) and carbon.
Electrolyte: Paste of KOH and \(\text{ZnO}\).
Electrode reactions:
Anode: \(\text{Zn(Hg)} + 2\text{OH}^- \rightarrow \text{ZnO (s)} + \text{H}_2\text{O} + 2\text{e}^-\)
Cathode: \(\text{HgO (s)} + \text{H}_2\text{O} + 2\text{e}^- \rightarrow \text{Hg (l)} + 2\text{OH}^-\)
It provides a constant voltage throughout its life because the overall reaction does not involve any ions whose concentration changes during its operation.
In simple words: The mercury cell maintains steady voltage because no ions in the overall reaction change concentration as it discharges.

 

Question 4. Give reasons for:
(a) For a weak electrolyte, its molar conductivity of dilute solution increases as the concentration of solution is decreased.
(b) Molar conductivity of a strong electrolyte like KCl decreases almost linearly while increasing concentration?
(c) It is not easy to determine \(\Lambda^\circ_m\) of a weak electrolyte by extrapolation of \(\sqrt{c} \text{ vs } \Lambda_m\) curves?
Answer:
(a) For a weak electrolyte, dilution increases the degree of dissociation, sharply increasing the total number of ions in solution.
(b) For a strong electrolyte, dilution does not change the degree of dissociation, but interionic attractions decrease, causing a small, linear increase in molar conductivity with dilution (or decrease with increasing concentration).
(c) For a weak electrolyte, the curve rises steeply at very low concentrations, making it impossible to accurately extrapolate the graph to zero concentration (\(c \rightarrow 0\)).
In simple words: Weak electrolytes produce more ions upon dilution, strong electrolytes just reduce ionic interference, and weak electrolyte curves cannot be reliably extrapolated to zero concentration.

Exam Tip: Differentiate between degree of dissociation (weak electrolytes) and interionic forces (strong electrolytes).

 

Question 5. (a) Write the mechanism of the corrosion of metals.
(b) How is underground iron pipe is protected from corrosion?
Answer:
(a) Mechanism of corrosion: Corrosion is an electrochemical phenomenon. Impurities or strains on a metal surface create small electrochemical cells. At the anode, iron gets oxidized: \(\text{Fe (s)} \rightarrow \text{Fe}^{2+} + 2\text{e}^-\). Electrons travel through the metal to the cathode where oxygen is reduced in the presence of \(\text{H}^+\): \(\text{O}_2 + 4\text{H}^+ + 4\text{e}^- \rightarrow 2\text{H}_2\text{O}\). The \(\text{Fe}^{2+}\) ions are further oxidized by atmospheric oxygen to form rust (\(\text{Fe}_2\text{O}_3 \cdot x\text{H}_2\text{O}\)).
(b) Underground iron pipes are protected by cathodic protection, connecting the iron pipe to a more reactive metal block like zinc or magnesium (sacrificial anode), which corrodes instead of the iron.
In simple words: Corrosion happens via electrochemical cells on the metal surface, and underground pipes are protected by attaching sacrificial blocks of more reactive metals.

Exam Tip: Highlight the roles of oxygen, moisture, and electrochemical cell formation in rusting.

 

Question 6. Formulate the galvanic cell in which the following reaction takes place : \(\text{Zn(s)} + 2\text{Ag}^+ \text{(aq)} \rightarrow \text{Zn}^{2+} \text{(aq)} + 2\text{Ag(s)}\)
State
(a) Which one of its electrodes is negatively charged?
(b) The reaction taking place at each of its electrode.
(c) The direction of current within this cell.
Answer:
Cell formulation: \(\text{Zn(s)} \mid \text{Zn}^{2+} \text{(aq)} \parallel \text{Ag}^+ \text{(aq)} \mid \text{Ag(s)}\)
(a) Zinc electrode (anode) is negatively charged.
(b) Anode reaction: \(\text{Zn (s)} \rightarrow \text{Zn}^{2+} \text{ (aq)} + 2\text{e}^-\)
Cathode reaction: \(\text{Ag}^+ \text{ (aq)} + \text{e}^- \rightarrow \text{Ag (s)}\)
(c) Within the cell, current flows from the silver cathode to the zinc anode through the electrolyte (via ion movement).
In simple words: Zinc is the negative anode, silver is the positive cathode, and internal current flows from cathode to anode.

Exam Tip: Remember: electron flow is opposite to conventional current flow.

 

Question 7. The standard reduction potentials are as given below:
Half Cell | \(E^\circ\) Value
\(\text{Zn(OH)}_2/\text{Zn}\) | \(-1.245\text{ V}\)
\(\text{Mg(OH)}_2/\text{Mg}\) | \(-2.690\text{ V}\)
\(\text{Fe(OH)}_2/\text{Fe}\) | \(-0.877\text{ V}\)
\(\text{Fe(OH)}_3/\text{Fe}\) | \(-2.30\text{ V}\)
Under standard conditions:
(a) Which is the strongest reducing agent?
(b) Which reducing agent could reduce \(\text{Zn(OH)}_2\) to Zn?
(c) Which reducing agent could reduce \(\text{Fe(OH)}_2\) to Fe?
Answer:
(a) Magnesium metal (\(\text{Mg}\)), corresponding to \(\text{Mg(OH)}_2/\text{Mg}\) with the most negative standard reduction potential (\(-2.690\text{ V}\)), is the strongest reducing agent.
(b) Any species with a more negative reduction potential than \(-1.245\text{ V}\) can reduce \(\text{Zn(OH)}_2\). Thus, Magnesium (\(\text{Mg}\) corresponding to \(-2.690\text{ V}\)).
(c) Any species with a more negative reduction potential than \(-0.877\text{ V}\) can reduce \(\text{Fe(OH)}_2\) (e.g., Magnesium or Zinc).
In simple words: The most negative reduction potential indicates the strongest reducing agent, capable of reducing species with higher (less negative) potentials.

 

LONG ANSWER TYPE QUESTIONS (5 MARKS)

Question 1. (a) Explain with example the terms weak and strong electrolytes.
(b) Calculate the emf of the cell: \(\text{Mg} \mid \text{Mg}^{2+} \text{ (0.001M)} \parallel \text{Cu}^{2+} \text{ (0.001M)} \mid \text{Cu}\), Given \(E^\circ_{\text{Cu}^{2+}/\text{Cu}} = 0.34\text{ V}; E^\circ_{\text{Mg}^{2+}/\text{Mg}} = -2.375\text{ V}\)
Answer:
(a) Strong electrolytes dissociate completely into ions in aqueous solution (e.g., \(\text{HCl}, \text{NaCl}\)). Weak electrolytes dissociate only partially into ions in aqueous solution (e.g., \(\text{CH}_3\text{COOH}, \text{NH}_4\text{OH}\)).
(b) Cell reaction: \(\text{Mg (s)} + \text{Cu}^{2+} \text{ (aq)} \rightarrow \text{Mg}^{2+} \text{ (aq)} + \text{Cu (s)}\), here \(n = 2\).
\(E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = 0.34 - (-2.375) = 2.715\text{ V}\)
Using Nernst equation:
\(E_{\text{cell}} = E^\circ_{\text{cell}} - \frac{0.0591}{n} \log \left(\frac{[\text{Mg}^{2+}]}{[\text{Cu}^{2+}]}\right)\)
\(E_{\text{cell}} = 2.715 - \frac{0.0591}{2} \log \left(\frac{0.001}{0.001}\right)\)
Since \(\log(1) = 0\):
\(E_{\text{cell}} = 2.715\text{ V}\) (Wait, with equal concentrations, \(E_{\text{cell}} = E^\circ_{\text{cell}} = 2.715\text{ V}\)).
In simple words: Strong electrolytes ionize fully, weak ones partially, and Nernst equation gives the cell EMF as \(2.715\text{ V}\).

Exam Tip: Check concentrations carefully; equal concentrations cancel out in the logarithmic term of the Nernst equation.

 

Question 2. (a) Explain Kohlrausch law of independent migration of ions. Mention two applications of this law.
(b) The conductivity of \(0.001\text{ M CH}_3\text{COOH}\) is \(4.95 \times 10^{-5}\text{ S cm}^{-1}\). Calculate its dissociation constant. Given for acetic acid \(\Lambda^\circ_m\) is \(390.5\text{ S cm}^2\text{mol}^{-1}\).
Answer:
(a) Kohlrausch law states that the limiting molar conductivity of an electrolyte can be represented as the sum of the individual contributions of the anions and cations of the electrolyte.
Applications: (1) Calculation of \(\Lambda^\circ_m\) for weak electrolytes. (2) Calculation of degree of dissociation of weak electrolytes.
(b) Calculations:
\(\Lambda_m = \frac{\kappa \times 1000}{C} = \frac{4.95 \times 10^{-5} \times 1000}{0.001} = 49.5\text{ S cm}^2\text{ mol}^{-1}\)
Degree of dissociation \(\alpha = \frac{\Lambda_m}{\Lambda^\circ_m} = \frac{49.5}{390.5} = 0.1268\)
Dissociation constant \(K_a = \frac{c\alpha^2}{1-\alpha} = \frac{0.001 \times (0.1268)^2}{1 - 0.1268} = 1.85 \times 10^{-5} \text{ (or } 0.126 \text{ for } \alpha\text{)}\).
In simple words: Kohlrausch law adds up ionic conductivities at infinite dilution, yielding a dissociation constant of \(1.85 \times 10^{-5}\).

Exam Tip: Always state units clearly for molar conductivity and dissociation constant calculations.

 

Question 3. (i) Define molar conductivity. Draw the plots showing the variation of molar conductivity for strong and weak electrolyte with square root of concentration.
(ii) Resistance of a solution (A) is \(50\text{ ohm}\) and that of solution (B) is \(100\text{ ohm}\), both solutions being taken in the same conductivity cell, if equal volumes of solutions (A) and (B) are mixed, what will be the resistance of the mixture, using the same cell? Assume that there is no increase in the degree of dissociation of (A) and (B) on mixing.
Answer:
(i) Molar conductivity is the conducting power of all the ions produced by one mole of an electrolyte dissolved in a specific volume of solution. Formula: \(\Lambda_m = \kappa \times V\).
Graph description: Strong electrolyte shows a linear increase with \(\sqrt{c}\) decreasing (Debye-Hückel-Onsager equation). Weak electrolyte shows a sharp, non-linear exponential increase at low concentrations.
(ii) Conductivity \(k = \frac{G^*}{R}\). For solution A: \(k_1 = \frac{y}{50}\); For solution B: \(k_2 = \frac{y}{100}\) (where \(y\) is cell constant).
When equal volumes are mixed, concentration is halved, so specific conductance of mixture is \(k_{\text{mix}} = \frac{k_1 + k_2}{2}\).
\(\frac{y}{R_{\text{mix}}} = \frac{1}{2} \left( \frac{y}{50} + \frac{y}{100} \right)\)
\(\frac{1}{R_{\text{mix}}} = \frac{1}{2} \left( \frac{1}{50} + \frac{1}{100} \right) = \frac{1}{2} \left( \frac{3}{100} \right) = \frac{3}{200}\)
\(R_{\text{mix}} = \frac{200}{3} = 66.66\text{ ohm}\).
In simple words: Molar conductivity measures conductivity per mole, and mixing equal volumes of two solutions results in a final resistance of \(66.66\text{ ohms}\).

Exam Tip: Remember that conductivity is additive upon mixing equal volumes, whereas resistance is not directly additive (conductance is).

 

Question 4. (a) State Faraday’s first and second laws of electrolysis.
(b) Silver is deposited on a metallic vessel of surface area \(800\text{ cm}^2\) by passing current of \(0.2\text{ ampere}\) for \(3\text{ hours}\). Calculate the thickness of silver deposited. (Density of silver = \(10.47\text{ g cm}^{-3}\), Molar atomic mass of silver = \(107.924\text{ g mol}^{-1}\))
Answer:
(a) Faraday's First Law: The amount of substance deposited at any electrode during electrolysis is directly proportional to the quantity of electricity passed through the electrolyte (\(w = ZIt\)).
Faraday's Second Law: When the same quantity of electricity is passed through different electrolytes, the masses of substances deposited are proportional to their equivalent weights.
(b) Calculations:
Charge \(Q = I \times t = 0.2\text{ A} \times 3 \times 3600\text{ s} = 2160\text{ C}\)
Mass of silver \(w = \frac{M \times I \times t}{n \times F} = \frac{107.924 \times 2160}{1 \times 96500} = 2.416\text{ g}\)
Volume = \(\frac{\text{Mass}}{\text{Density}} = \frac{2.416\text{ g}}{10.47\text{ g cm}^{-3}} = 0.2307\text{ cm}^3\)
Thickness = \(\frac{\text{Volume}}{\text{Area}} = \frac{0.2307\text{ cm}^3}{800\text{ cm}^2} = 2.88 \times 10^{-4}\text{ cm}\) (or \(2.9 \times 10^{-4}\text{ cm}\)).
In simple words: Use Faraday's first law to find the mass of silver deposited, then divide by density and surface area to find the thickness.

Exam Tip: Convert time into seconds before calculating charge in Coulombs.

 

Question 5. (a) Draw the diagram of standard hydrogen electrode. Write the electrode reaction.
(b) Calculate the equilibrium constant for the reaction : \(\text{Fe}^{2+} + \text{Ce}^{4+} \rightleftharpoons \text{Ce}^{3+} + \text{Fe}^{3+}\), Given \(E^\circ_{\text{Ce}^{4+}/\text{Ce}^{3+}} = 1.44\text{ V}; E^\circ_{\text{Fe}^{3+}/\text{Fe}^{2+}} = 0.68\text{ V}\)
Answer:
(a) Diagram description: A platinum wire sealed in a glass tube connected to a platinum foil coated with platinum black, immersed in \(1\text{ M HCl}\) solution, with pure hydrogen gas bubbled at 1 bar pressure and 298 K.
Electrode reaction: \(2\text{H}^+ \text{ (aq)} + 2\text{e}^- \rightleftharpoons \text{H}_2 \text{ (g)}\)
(b) Calculations:
\(E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = 1.44 - 0.68 = 0.76\text{ V}\)
\(\log K = \frac{n E^\circ_{\text{cell}}}{0.0591} = \frac{1 \times 0.76}{0.0591} = 12.859\)
\(K = \text{antilog}(12.859) = 7.2 \times 10^{12} \text{ (or } 7.6 \times 10^{12}\text{)}\).
In simple words: Calculate standard cell potential, substitute into the Nernst equilibrium equation, and solve for the equilibrium constant.

Exam Tip: Make sure to identify the oxidizing and reducing agents correctly to find \(E^\circ_{\text{cell}}\).

 

NUMERICAL PROBLEMS

Question 1. The emf of the following cells are:
\text{Ag} \mid \text{Ag}^+ \text{(1M)} \parallel \text{Cu}^{2+} \text{(1M)} \mid \text{Cu}, E^\circ = 0.46\text{ V}
\text{Zn} \mid \text{Zn}^{2+} \text{(1M)} \parallel \text{Cu}^{2+} \text{(1M)} \mid \text{Cu}, E^\circ = 1.1\text{ V}
Calculate emf of the cell : \(\text{Zn(s)} \mid \text{Zn}^{2+} \text{(1M)} \parallel \text{Ag}^+ \text{(1M)} \mid \text{Ag(s)}\)
Answer:
Given cell potentials:
1) \(E^\circ(\text{Cu}^{2+}/\text{Cu}) - E^\circ(\text{Ag}^+/\text{Ag}) = 0.46\text{ V}\)
2) \(E^\circ(\text{Cu}^{2+}/\text{Cu}) - E^\circ(\text{Zn}^{2+}/\text{Zn}) = 1.1\text{ V}\)
We need \(E^\circ_{\text{cell}}\) for \(\text{Zn} \mid \text{Zn}^{2+} \parallel \text{Ag}^+ \mid \text{Ag}\), which is:
\(E^\circ_{\text{cell}} = E^\circ(\text{Ag}^+/\text{Ag}) - E^\circ(\text{Zn}^{2+}/\text{Zn})\)
Subtracting equation (1) from equation (2):
\([E^\circ(\text{Cu}^{2+}/\text{Cu}) - E^\circ(\text{Zn}^{2+}/\text{Zn})] - [E^\circ(\text{Cu}^{2+}/\text{Cu}) - E^\circ(\text{Ag}^+/\text{Ag})] = 1.1 - 0.46\)
\(E^\circ(\text{Ag}^+/\text{Ag}) - E^\circ(\text{Zn}^{2+}/\text{Zn}) = 0.64\text{ V}\).
In simple words: Subtract the two given cell potentials to find the standard cell EMF for the zinc-silver cell, which equals \(0.64\text{ V}\).

Exam Tip: Combine standard half-cell potentials algebraically to find unknown cell voltages.

 

Question 2. For concentration cell: \(\text{Cu(s)} \mid \text{Cu}^{2+} \text{(0.01M)} \parallel \text{Cu}^{2+} \text{(0.1M)} \mid \text{Cu(s)}\)
(a) Calculate the cell potential.
(b) Will the cell generate emf when concentration becomes equal?
Answer:
(a) For a concentration cell, \(E^\circ_{\text{cell}} = 0\). Using Nernst equation with \(n = 2\):
\(E_{\text{cell}} = 0 - \frac{0.0591}{2} \log \left(\frac{[\text{Cu}^{2+}]_{\text{anode}}}{[\text{Cu}^{2+}]_{\text{cathode}}}\right)\)
\(E_{\text{cell}} = -\frac{0.0591}{2} \log \left(\frac{0.01}{0.1}\right) = -\frac{0.0591}{2} \log(0.1) = -\frac{0.0591}{2} (-1) = +0.02955\text{ V} \text{ (or } 0.295\text{V with correct powers)}\).
(b) No, the cell will not generate EMF when concentrations become equal (\(\log(1) = 0\)).
In simple words: Concentration cells generate voltage due to concentration differences, which drops to zero when concentrations equalize.

 

Question 3. Calculate the equilibrium constant for the reaction at \(25^\circ\text{C}\): \(\text{Cu(s)} + 2\text{Ag}^+ \text{(aq)} \rightleftharpoons \text{Cu}^{2+} \text{(aq)} + 2\text{Ag(s)}\). The standard cell potential for the reaction at \(25^\circ\text{C}\) is \(0.46\text{ V}\).
Answer:
Using the relation between equilibrium constant and standard cell potential (\(n = 2\)):
\(\log K = \frac{n E^\circ_{\text{cell}}}{0.0591} = \frac{2 \times 0.46}{0.0591} = 15.5668\)
\(K = \text{antilog}(15.5668) = 3.69 \times 10^{15} \text{ (or } 4.0 \times 10^{15}\text{)}\).
In simple words: Substitute \(E^\circ_{\text{cell}}\) and \(n\) into the logarithmic formula to find the equilibrium constant.

Exam Tip: A large equilibrium constant indicates that the reaction goes almost to completion.

 

Question 4. Calculate \(\Delta G^\circ\) for the reaction: \(\text{Cu}^{2+} \text{(aq)} + \text{Fe(s)} \rightarrow \text{Fe}^{2+} \text{(aq)} + \text{Cu(s)}\). Given \(E^\circ_{\text{Cu}^{2+}/\text{Cu}} = 0.34\text{ V}; E^\circ_{\text{Fe}^{2+}/\text{Fe}} = -0.44\text{ V}\).
Answer:
\(E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = 0.34 - (-0.44) = 0.78\text{ V}\)
Here \(n = 2\).
\(\Delta G^\circ = -nFE^\circ_{\text{cell}} = -2 \times 96500\text{ C mol}^{-1} \times 0.78\text{ V}\)
\(\Delta G^\circ = -150,540\text{ J mol}^{-1} = -150.54\text{ kJ mol}^{-1}\).
In simple words: Use Gibbs free energy formula \(\Delta G^\circ = -nFE^\circ_{\text{cell}}\) to calculate free energy change.

 

Question 6. Write the Nernst equation and calculate the emf of the following cell at 298K: \(\text{Cu(s)} \mid \text{Cu}^{2+} \text{(0.130M)} \parallel \text{Ag}^+ \text{(10}^{-2}\text{M)} \mid \text{Ag(s)}\). Given \(E^\circ_{\text{Cu}^{2+}/\text{Cu}} = +0.34\text{V}; E^\circ_{\text{Ag}^+/\text{Ag}} = +0.80\text{V}\).
Answer:
Cell reaction: \(\text{Cu (s)} + 2\text{Ag}^+ \text{ (aq)} \rightarrow \text{Cu}^{2+} \text{ (aq)} + 2\text{Ag (s)}\), here \(n = 2\).
\(E^\circ_{\text{cell}} = 0.80 - 0.34 = 0.46\text{ V}\)
Nernst equation:
\(E_{\text{cell}} = E^\circ_{\text{cell}} - \frac{0.0591}{2} \log \left(\frac{[\text{Cu}^{2+}]}{[\text{Ag}^+]^2}\right)\)
\(E_{\text{cell}} = 0.46 - \frac{0.0591}{2} \log \left(\frac{0.130}{(10^{-2})^2}\right)\)
\(E_{\text{cell}} = 0.46 - 0.02955 \log \left(\frac{0.130}{10^{-4}}\right) = 0.46 - 0.02955 \log(1300)\)
\(E_{\text{cell}} = 0.46 - 0.02955 \times 3.1139 = 0.46 - 0.092 = 0.368\text{ V} \text{ (or } 0.37\text{V}\text{)}\).
In simple words: Substitute concentrations and standard potential into the Nernst equation to get \(0.37\text{ V}\).

 

Question 7. A zinc rod is dipped in \(0.1\text{ M}\) solution of \(\text{ZnSO}_4\). The salt is 95% dissociated at this dilution at 298K. Calculate the electrode potential (\(E^\circ_{\text{Zn}^{2+}/\text{Zn}} = -0.76\text{ V}\)).
Answer:
Concentration of \(\text{Zn}^{2+}\) ions = \(0.1\text{ M} \times \frac{95}{100} = 0.095\text{ M}\).
Half-cell reaction: \(\text{Zn}^{2+} + 2\text{e}^- \rightarrow \text{Zn}\) (\(n = 2\)).
Nernst equation:
\(E = E^\circ - \frac{0.0591}{2} \log \left(\frac{1}{[\text{Zn}^{2+}]}\right)\)
\(E = -0.76 - \frac{0.0591}{2} \log \left(\frac{1}{0.095}\right) = -0.76 - 0.02955 \log(10.526)\)
\(E = -0.76 - 0.02955 \times 1.022 = -0.76 - 0.0302 = -0.7902\text{ V}\).
In simple words: Calculate actual ion concentration accounting for percentage dissociation, then use the Nernst equation to find electrode potential.

 

Question 8. For the electrode \(\text{Pt, H}_2\text{ (1 atm)} \mid \text{H}^+ \text{ (aq)} (x\text{M})\), the reduction electrode potential at \(25^\circ\text{C}\) is \(-0.34\text{ V}\). Write the electrode reaction and calculate the value of x and the pH of solution.
Answer:
Electrode reaction: \(2\text{H}^+ \text{ (aq)} + 2\text{e}^- \rightarrow \text{H}_2 \text{ (g)}\)
Nernst equation: \(E = E^\circ - \frac{0.0591}{n} \log \left(\frac{p_{\text{H}_2}}{[\text{H}^+]^2}\right)\)
Since \(E^\circ = 0\) for SHE:
\(-0.34 = 0 - \frac{0.0591}{2} \log \left(\frac{1}{[\text{H}^+]^2}\right) = 0.0591 \log[\text{H}^+]\)
\(\log[\text{H}^+] = \frac{-0.34}{0.0591} = -5.753\)
\([\text{H}^+] = x = \text{antilog}(-5.753) = 1.807 \times 10^{-6}\text{ M}\)
\(\text{pH} = -\log[\text{H}^+] = 5.743\).
In simple words: Use the Nernst equation for hydrogen electrode to find hydrogen ion concentration and pH.

 

Question 9. For what concentration of \(\text{Ag}^+ \text{ (aq)}\) will the emf of the given cell be zero at \(25^\circ\text{C}\) if concentration of \(\text{Cu}^{2+} \text{ (aq)}\) is \(0.1\text{ M}\)? Given \(E^\circ_{\text{Ag}^+/\text{Ag}} = 0.80\text{ V}; E^\circ_{\text{Cu}^{2+}/\text{Cu}} = +0.34\text{ V}\). Cell: \(\text{Cu (s)} \mid \text{Cu}^{2+} \text{ (aq)} \parallel \text{Ag}^+ \text{(aq)} \mid \text{Ag(s)}\)
Answer:
\(E^\circ_{\text{cell}} = 0.80 - 0.34 = 0.46\text{ V}\)
When \(E_{\text{cell}} = 0\), using Nernst equation with \(n = 2\):
\(0 = E^\circ_{\text{cell}} - \frac{0.0591}{2} \log \left(\frac{[\text{Cu}^{2+}]}{[\text{Ag}^+]^2}\right)\)
\(0.46 = \frac{0.0591}{2} \log \left(\frac{0.1}{[\text{Ag}^+]^2}\right)\)
\(\log \left(\frac{0.1}{[\text{Ag}^+]^2}\right) = \frac{0.46 \times 2}{0.0591} = 15.5668\)
\(\frac{0.1}{[\text{Ag}^+]^2} = \text{antilog}(15.5668) = 3.69 \times 10^{15}\)
\([\text{Ag}^+]^2 = \frac{0.1}{3.69 \times 10^{15}} = 2.71 \times 10^{-17} = 27.1 \times 10^{-18}\)
\([\text{Ag}^+] = 5.2 \times 10^{-9}\text{ M} \text{ (or } 5.3 \times 10^{-9}\text{M}\text{)}\).
In simple words: Set cell EMF to zero in the Nernst equation and solve for silver ion concentration.

 

Question 10. Zinc granules are added in excess to \(500\text{ mL}\) of \(1.0\text{ M}\) nickel nitrate solution at \(25^\circ\text{C}\) until the equilibrium is reached. If the standard reduction potential of \(\text{Zn}^{2+} \mid \text{Zn}\) and \(\text{Ni}^{2+} \mid \text{Ni}\) are \(-0.75\text{ V}\) and \(-0.24\text{ V}\) respectively, find out the concentration of \(\text{Ni}^{2+}\) in solution at equilibrium.
Answer:
Reaction: \(\text{Zn (s)} + \text{Ni}^{2+} \text{ (aq)} \rightleftharpoons \text{Zn}^{2+} \text{ (aq)} + \text{Ni (s)}\), here \(n = 2\).
\(E^\circ_{\text{cell}} = -0.24 - (-0.75) = +0.51\text{ V}\)
\(\log K = \frac{n E^\circ_{\text{cell}}}{0.0591} = \frac{2 \times 0.51}{0.0591} = 17.2588\)
\(K = \text{antilog}(17.2588) = 1.81 \times 10^{17} = \frac{[\text{Zn}^{2+}]}{[\text{Ni}^{2+}]}\)
At equilibrium, if \(x\) moles of \(\text{Ni}^{2+}\) react, \([\text{Zn}^{2+}] = x\) and \([\text{Ni}^{2+}] = 1.0 - x \approx 1.0\).
\(K = \frac{[\text{Zn}^{2+}]}{[\text{Ni}^{2+}]} \Rightarrow [\text{Ni}^{2+}] = \frac{1.0}{1.81 \times 10^{17}} = 5.5 \times 10^{-18}\text{ M} \text{ (or } 5.88 \times 10^{-18}\text{M}\text{)}\).
In simple words: Calculate equilibrium constant from standard cell potential, then determine the equilibrium nickel ion concentration.

 

Question 11. The molar conductivity of \(0.1\text{ M CH}_3\text{COOH}\) solution is \(4.6\text{ S cm}^2\text{ mol}^{-1}\). Calculate the conductivity and resistivity of the solution.
Answer:
\(\Lambda_m = \frac{\kappa \times 1000}{C} \Rightarrow 4.6 = \frac{\kappa \times 1000}{0.1}\)
\(\kappa = \frac{4.6 \times 0.1}{1000} = 4.6 \times 10^{-4}\text{ S cm}^{-1} = 0.00046\text{ S cm}^{-1}\)
Resistivity \(\rho = \frac{1}{\kappa} = \frac{1}{4.6 \times 10^{-4}} = 2173.9\text{ } \Omega\text{ cm} \approx 2174\text{ } \Omega\text{ cm}\).
In simple words: Use the molar conductivity formula to find conductivity, then invert it to find resistivity.

 

Question 12. The molar conductivities of \(\text{NH}_4^+\) ion and \(\text{Cl}^-\) ion are \(73.5\text{ S cm}^2\text{ mol}^{-1}\) and \(76.255\text{ S cm}^2\text{ mol}^{-1}\) respectively. The specific conductivity of \(0.1\text{ M NH}_4\text{Cl}\) is \(1.288 \times 10^{-2}\text{ S cm}^{-1}\). Calculate the dissociation constant of \(\text{NH}_4\text{Cl}\).
Answer:
\(\Lambda^\circ_m(\text{NH}_4\text{Cl}) = \lambda^\circ(\text{NH}_4^+) + \lambda^\circ(\text{Cl}^-) = 73.5 + 76.255 = 149.755\text{ S cm}^2\text{ mol}^{-1}\)
\(\Lambda_m = \frac{\kappa \times 1000}{C} = \frac{1.288 \times 10^{-2} \times 1000}{0.1} = 128.8\text{ S cm}^2\text{ mol}^{-1}\)
Degree of dissociation \(\alpha = \frac{\Lambda_m}{\Lambda^\circ_m} = \frac{128.8}{149.755} = 0.8601\)
Dissociation constant \(K_a = \frac{c\alpha^2}{1-\alpha} = \frac{0.1 \times (0.8601)^2}{1 - 0.8601} = \frac{0.07398}{0.1399} = 0.528 \text{ (or check typical values for strong electrolytes)}\).
In simple words: Find molar conductivity at infinite dilution, calculate degree of dissociation, and evaluate the dissociation constant.

 

Question 13. Molar conductivity at infinite dilution for \(\text{NH}_4\text{Cl}, \text{NaOH}\) and \(\text{NaCl}\) solution at 298K are respectively 129.8, 218.4 and \(108.9\text{ Scm}^2\text{ mol}^{-1}\) and \(\Lambda_m\) for \(10^{-2}\text{ M}\) solution of \(\text{NH}_4\text{OH}\) is \(9.33\text{ S cm}^2\text{ mol}^{-1}\). Calculate the degree of dissociation of \(\text{NH}_4\text{OH}\).
Answer:
\(\Lambda^\circ_m(\text{NH}_4\text{OH}) = \Lambda^\circ_m(\text{NH}_4\text{Cl}) + \Lambda^\circ_m(\text{NaOH}) - \Lambda^\circ_m(\text{NaCl})\)
\(\Lambda^\circ_m(\text{NH}_4\text{OH}) = 129.8 + 218.4 - 108.9 = 239.3\text{ S cm}^2\text{ mol}^{-1}\)
Degree of dissociation \(\alpha = \frac{\Lambda_m}{\Lambda^\circ_m} = \frac{9.33}{239.3} = 0.03898 \approx 0.039\).
In simple words: Use Kohlrausch's law to find the limiting molar conductivity of ammonium hydroxide, then divide by the actual molar conductivity to find degree of dissociation.

 

Question 14. Write the Nernst equation and emf of the following cell at 298 K; \(\text{Pt(s)} \mid \text{Br}_2\text{(l)} \mid \text{Br}^-\text{(0.010M)} \parallel \text{H}^+\text{(0.030M)} \mid \text{H}_2\text{(g)} \text{ (0.9 bar)} \mid \text{Pt(s)}\). \(E^\theta_{\text{Br}_2/\text{Br}^-/Pt} = 1.09\text{ V}\).
Answer:
Cell reactions:
Anode: \(2\text{Br}^- \rightarrow \text{Br}_2\text{(l)} + 2\text{e}^-\)
Cathode: \(2\text{H}^+ + 2\text{e}^- \rightarrow \text{H}_2\text{(g)}\)
Overall: \(2\text{Br}^- + 2\text{H}^+ \rightarrow \text{Br}_2 + \text{H}_2\) (\(n = 2\)).
\(E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = 0 - 1.09 = -1.09\text{ V}\)
Nernst equation:
\(E_{\text{cell}} = E^\circ_{\text{cell}} - \frac{0.0591}{2} \log \left(\frac{p_{\text{H}_2}}{[\text{Br}^-]^2 [\text{H}^+]^2}\right)\)
\(E_{\text{cell}} = -1.09 - \frac{0.0591}{2} \log \left(\frac{0.9}{(0.010)^2 (0.030)^2}\right)\)
\(E_{\text{cell}} = -1.09 - 0.02955 \log \left(\frac{0.9}{10^{-4} \times 9 \times 10^{-7}}\right) = -1.09 - 0.02955 \log(10^{10})\) (approx \(-1.297\text{ V}\)).
In simple words: Set up the Nernst equation with partial pressure and ion concentrations to find cell EMF of \(-1.297\text{ V}\).

 

Question 15. In the button cells widely used in watches and other devices, the following reaction takes place : \(\text{Zn(s)} + \text{Ag}_2\text{O (s)} + \text{H}_2\text{O (l)} \rightarrow \text{Zn}^{2+} \text{(aq)} + 2\text{Ag(s)} + 2\text{OH}^- \text{(aq)}\). Determine \(\Delta_r G^\circ\) and \(E^\circ\) for the reaction. Given \(E^\circ_{\text{Zn}^{2+}/\text{Zn}} = -0.76\text{ V}; E^\circ_{\text{Ag}^+/\text{Ag}} = 0.8\text{ V}\).
Answer:
\(E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = 0.80 - (-0.76) = 1.56\text{ V}\)
Here \(n = 2\).
\(\Delta_r G^\circ = -nFE^\circ_{\text{cell}} = -2 \times 96500\text{ C mol}^{-1} \times 1.56\text{ V}\)
\(\Delta_r G^\circ = -301,080\text{ J mol}^{-1} = -301.08\text{ kJ mol}^{-1}\).
In simple words: Calculate standard cell potential as \(1.56\text{ V}\) and Gibbs free energy change as \(-301.08\text{ kJ mol}^{-1}\).

Exam Tip: Button cells provide a stable standard potential of \(1.56\text{ V}\) using zinc and silver oxide.

 

CBSE Class 12 Chemistry Assignments for Unit 2 Electrochemistry

Revision Assignment: Unit 2 Electrochemistry (CBSE)

Explore reliable practice questions for Unit 2 Electrochemistry tailored for Class 12 learners. Use these structured worksheets to evaluate preparedness and strengthen core problem-solving skills.

Why Practice Class 12 Chemistry Assignments?

  • Syllabus Compliance: Sets reflect current CBSE evaluation criteria and official marking frameworks.
  • Multi-Format Practice: Includes varied problem types designed to deepen comprehension across all sub-topics.
  • Time Management: Routine practice optimizes pacing to finish school examinations comfortably within schedule.

How to Approach Chemistry Unit 2 Electrochemistry Assignments

  1. Concept Foundation: Review the NCERT book for Class 12 Chemistry thoroughly before diving into assignment tasks.
  2. Self-Evaluation: Solve exercises independently before inspecting professional answer guides.
  3. Progress Monitoring: Note down complex formulas or concepts, clearing them up using available online practice aids.

FAQs

Where can I download the latest CBSE Class 12 Chemistry Unit 2 Electrochemistry assignments?

You can download free PDF assignments for Class 12 Chemistry Unit 2 Electrochemistry from StudiesToday.com. These practice sheets have been updated for the 2026-27 session covering all concepts from latest NCERT textbook.

Do these Chemistry Unit 2 Electrochemistry assignments include solved questions?

Yes, our teachers have given solutions for all questions in the Class 12 Chemistry Unit 2 Electrochemistry assignments. This will help you to understand step-by-step methodology to get full marks in school tests and exams.

Are the assignments for Class 12 Chemistry Unit 2 Electrochemistry based on the 2026 exam pattern?

Yes. These assignments are designed as per the latest CBSE syllabus for 2026. We have included huge variety of question formats such as MCQs, Case-study based questions and important diagram-based problems found in Unit 2 Electrochemistry.

How can practicing Unit 2 Electrochemistry assignments help in Chemistry preparation?

Practicing topicw wise assignments will help Class 12 students understand every sub-topic of Unit 2 Electrochemistry. Daily practice will improve speed, accuracy and answering competency-based questions.

Can I download Chemistry Unit 2 Electrochemistry assignments for free on mobile?

Yes, all printable assignments for Class 12 Chemistry Unit 2 Electrochemistry are available for free download in mobile-friendly PDF format.