Xam Idea Solutions Class 12 Chemistry Chapter 6 General Principles And Processes Of Isolation Of E Short Answer Questions I

Step-by-Step Solutions for Class 12 Chemistry Chapter 06 General Principles And Processes Of Isolation Of E

Explore reliable textbook solutions for Chapter 06 General Principles And Processes Of Isolation Of E tailored for Class 12 learners using methodologies. Utilizing these Chemistry answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.

Download Chapter 06 General Principles And Processes Of Isolation Of E Textbook Solutions PDF

Access the complete solution PDF for Class 12 Chemistry below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

Short Answer Questions I

Question 1. Describe the principle controlling each of the following processes: [CBSE (AI) 2011]

Preparation of cast iron from pig iron.

Solution.

Pig iron is melt with scrap iron and coke using hot air blast. Due to this, impurities such as C, S and P present in the pig iron are removed as CO2, SO2 and P2O5 and carbon content reduced to about 3%.

Q. Preparation of pure alumina (Al2O3) from bauxite ore. Ans. Bauxite is soluble in concentrated NaOH solution whereas impurities are not.

Q. Preparation of pure alumina (Al2O3) from bauxite ore.

Ans. Bauxite is soluble in concentrated NaOH solution whereas impurities are not.

Teacher's Note: Cast iron is made by remelting pig iron with scrap and coke in a hot blast.

Exam Note: State the principle: remelting pig iron with coke in hot blast.

Question 2. Answer the following questions [CBSE Delhi 2013]

Which solution is used for the leaching of silver metal in the presence of air in the metallurgy of silver?

Solution.

Dilute solution of NaCN.

Q. Out of C and CO, which is a better reducing agent at the lower temperature range in the blast furnace to extract iron from the oxide ore?

Ans. CO.

Teacher's Note: Leaching of silver uses a dilute cyanide solution, and carbon monoxide is the better reductant at lower temperatures.

Exam Note: Answer each sub-question separately, with a dilute NaCN solution for the first.

Question 3. Name one chief ore each of copper and aluminium. Name the method used for concentration of these two ores. [CBSE (F) 2012]

Solution.

Metal Chief ore Method of concentration

Copper Copper pyrite (CuFeS2) Froth floatation

Bauxite [AlOx (OH)3– Aluminium Leaching 2x]where 0 < x < 1

Teacher's Note: Each metal has a chief ore and a suited concentration method.

Exam Note: Give ore with formula and method for both copper and aluminium.

Question 4. Answer the following questions [CBSE Delhi 2010; (AI) 2014]

Indicate the principle behind the method used for the refining of zinc.

Solution.

Distillation, as zinc is a low boiling metal.

Q. Which form of the iron is the purest form of commercial iron?

Ans. Wrought iron is the purest form of commercial iron.

Teacher's Note: Distillation works because zinc is volatile, and each stated form of iron suits specific uses.

Exam Note: Answer each part with principle and example.

Question 5. Why is it advantageous to roast a sulphide ore to the oxide before reduction? f Go) of formation of most of the sulphides are

Solution.

The standard free energies ( greater than those of CS2 and H2S (CS2 is in fact, an endothermic compound). Therefore, neither carbon nor hydrogen can reduce metal sulphides to metal. In contrast, the standard free energies of formation of oxides are much lower than that of CO2 and hence oxidation of metal sulphides to metal oxides is thermodynamically favourable. Therefore, it is the common practice to roast sulphide ore to the oxide before reduction.

Teacher's Note: Roasting converts sulphides to oxides whose free energy of formation makes reduction feasible.

Exam Note: Compare free energies of oxides with sulphides to justify roasting.

Question 6. What should be the considerations during the extraction of metals by electrochemical method? [NCERT Exemplar]

Solution.

Generally two things are considered so that proper precautions can be taken.

i. Reactivity of metal produced. ii. Suitability of electrodes.

Teacher's Note: Electrochemical extraction needs care about the type of electrolyte and the electrodes and products.

Exam Note: Give the two considerations listed in the answer.

Question 7. The purest form of iron is prepared by oxidising impurities from cast iron in a reverberatory furnace. Which iron ore is used to line the furnace? Explain by giving reaction. [NCERT Exemplar]

Solution.

Haematite. Fe2O3 + 3C → 2Fe + 3CO

Teacher's Note: Haematite is the oxide ore in this process, which makes the purest iron.

Exam Note: Name haematite and write the reduction reaction.

Question 8. Write down the reactions taking place in blast furnace related to the metallurgy of iron in the temperature range 500–800 K. [NCERT Exemplar]

Solution.

3Fe2O3 + CO → 2Fe3O4 + CO2

Fe3O4 + 4CO → 3Fe + 4CO2

Fe2O3 + CO → 2FeO + CO2

Teacher's Note: Different temperature zones in the blast furnace bring about different reduction steps.

Exam Note: Write the reactions by temperature range, balanced and in order.

Question 9. Although thermodynamically feasible, in practice, magnesium metal is not used for the reduction of alumina in the metallurgy of aluminium. Why?

Solution.

Temperatures below the point of intersection of Al2O3 and MgO curves, magnesium can reduce alumina. But magnesium is a much costlier metal than aluminium and hence the process will be uneconomical.

Teacher's Note: At the lower temperatures the Al2O3 and MgO curves cross, so magnesium cannot reduce alumina there in practice.

Exam Note: Refer to the Ellingham diagram and the intersection point.

Question 10. Why is an external emf of more than 2.2 V required for the extraction of Cl2 from brine? [NCERT Exemplar]

Solution.

For the reaction,

2Cl–(aq) + 2H2O(l) 2OH–(aq) + H2(g) + Cl2(g)

Go is + 422 kJ. Using the equation Go = –nFEo, the value of Eo comes out Value of to be – 2.2 V. Therefore, extraction of Cl2 from brine will require an external emf of greater than 2.2 V.

Teacher's Note: An external potential greater than the cell potential is needed to drive electrolysis of brine.

Exam Note: Link the calculated cell potential to the extra voltage required.

Question 11. How are metals used as semiconductors refined? What is the principle of the method used? [NCERT Exemplar]

Solution.

Semiconducting metal is produced by zone refining method which is based on the principle that the impurities are more soluble in melt than in the solid state of metals.

Teacher's Note: Zone refining relies on impurities being more soluble in the molten zone than in the solid metal.

Exam Note: State zone refining and the solubility difference principle.

Question 12. Give two requirements for vapour phase refining. [NCERT Exemplar]

Solution.

i. The metal should form volatile compound with a suitable reagent. ii. The volatile compound should be easily decomposable so that the recovery of metal is easy.

Teacher's Note: Vapour phase refining needs a volatile compound that can be decomposed to give pure metal.

Exam Note: State both requirements as in the answer.

Question 13. How can you separate alumina (Al2O3) from silica present in bauxite ore? Write the chemical equations for the reactions involved. [CBSE (F) 2013]

Solution.

Leaching of aluminium from bauxite: Finely powdered bauxite ore is digested with an aqueous solution of sodium hydroxide at 473–523 K and 35–36 bar pressure. Al2O3 is leached out as sodium aluminate (and SiO2 too as sodium silicate) leaving impurities behind.

Al2O3(s) + 2NaOH(aq) + 3H2O(l) → 2Na[Al(OH)4](aq)

The aluminate in solution is neutralised by passing CO2 gas and hydrated Al2O3 is precipitated. At this stage, the solution is seeded with freshly prepared samples of hydrated Al2O3 which induces the precipitation.

2Na[Al(OH)4](aq) + CO2(g) → Al2O3·xH2O(s) + 2NaHCO3(aq)

The sodium silicate remains in the solution and hydrated alumina is filtered, dried and heated to get back pure Al2O3.

Al2O3·xH2O(s) → Al2O3(s) + xH2O(g) (on heating)

Teacher's Note: Alumina dissolves in hot concentrated NaOH while most impurities do not; CO2 then precipitates hydrated alumina.

Exam Note: Leach with NaOH, precipitate with CO2, heat.

Question 14. Write the role of the following: [CBSE (F) 2014] CO in the purification of nickel.

Solution.

Impure nickel when heated in a current of CO forms volatile complex nickel tetracarbonyl, Ni(CO)4, leaving behind impurities.

Ni + 4CO → Ni(CO)4 (330–350 K)

The nickel tetracarbonyl complex thus obtained is then heated to a higher temperature so that it is decomposed to give pure metal.

Ni(CO)4 → Ni + 4CO (450–470 K)

Teacher's Note: CO forms a volatile nickel compound that separates from impurities and later decomposes to pure nickel.

Exam Note: CO forms volatile Ni(CO)4; decomposes to pure Ni.

Question 15. Answer the following questions [CBSE Delhi 2013] (i) Which of the following ores can be concentrated by froth floatation method and why? Fe2O3, ZnS, Al2O3. (ii) What is the role of silica in the metallurgy of copper?

Solution.

(i) ZnS. This is because the sulphide ore particles are preferentially wetted by oil and gangue particles are preferentially wetted by water.

(ii) Silica acts as a flux to remove impurity, iron oxide (FeO) as slag in the metallurgy of copper.

FeO + SiO2 → FeSiO3 (slag)

Teacher's Note: Only sulphide ores are wetted by pine oil; silica combines with FeO to form slag.

Exam Note: ZnS; silica is acidic flux forming FeSiO3 slag.

Question 16. Describe the principle involved in each of the following processes. [CBSE Delhi 2012] (i) Mond process for refining of nickel. (ii) Column chromatography for purification of rare elements.

Solution.

(i) In Mond process, nickel is converted into its volatile complex, tetracarbonyl nickel, and gets collected elsewhere. It is then decomposed to give pure nickel.

(ii) Column chromatography is based on the principle that different components of a mixture are differently adsorbed on an adsorbent.

Teacher's Note: Mond process uses a volatile carbonyl; chromatography separates components by their different adsorption.

Exam Note: Mond: volatile carbonyl; chromatography: differential adsorption.

Question 17. The extraction of Au by leaching with NaCN involves both oxidation and reduction. Justify giving equations.

Solution.

4Au(s) + 8CN−(aq) + 2H2O(aq) + O2(g) → 4[Au(CN)2]−(aq) + 4OH−(aq)

2[Au(CN)2]−(aq) + Zn(s) → 2Au(s) + [Zn(CN)4]2−(aq)

In the first reaction, Au changes into Au+, i.e., its oxidation takes place. In the second reaction, Au+ changes to Au, i.e., reduction takes place.

Teacher's Note: Gold is oxidised when it dissolves as a cyanide complex, then reduced when zinc displaces it.

Exam Note: Oxidation in leaching, reduction by zinc displacement.

Class 12 Mathematics: Xam Idea Solutions for Xam Idea Solutions Class 12 Chemistry Chapter 6 General Principles And Processes Of Isolation Of E Short Answer Questions I

Chapter-wise Xam Idea Solutions: Xam Idea Solutions Class 12 Chemistry Chapter 6 General Principles And Processes Of Isolation Of E Short Answer Questions I

Access the complete chapter-wise PDF for Xam Idea Solutions Class 12 Chemistry Chapter 6 General Principles And Processes Of Isolation Of E Short Answer Questions I. These structured Xam Idea Solutions solutions for Class 12 Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.

Concept-Driven Math Answers

Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.

Next Steps in Your Mathematics Revision

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these [current-page:node:field_author] Solutions for Class 12 Chemistry?

They are chapter-wise solved questions from the book for Class 12 Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 12 Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 12 Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 12 Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 12 Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.