Xam Idea Solutions Class 12 Chemistry Chapter 5 Surface Chemistry Very Short Answer Questions

Official Textbook Solutions: Class 12 Chemistry Chapter 05 Surface Chemistry

Review structured textbook solutions for Class 12 Chemistry Chapter 05 Surface Chemistry prepared by . Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.

Chapter-wise Solutions for Chemistry: Chapter 05 Surface Chemistry

Navigate directly to the solved Chemistry textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.

Very Short Answer Questions

Question 1. What type of forces are responsible for the occurrence of physisorption? [CBSE (F) 2014]

Solution.

van der Waals’ forces.

Teacher's Note: Physisorption arises from weak, nonspecific attraction between adsorbate and surface.

Exam Note: Write van der Waals forces.

Question 2. Which has a higher enthalpy of adsorption: physisorption or chemisorption? [CBSE (AI) 2013]

Solution.

Chemisorption.

Teacher's Note: Chemisorption involves bond formation, so it releases much more heat than physisorption.

Exam Note: Answer chemisorption and link it to chemical bonding.

Question 3. Out of BaCl2 and KCl, which one is more effective in causing coagulation of a negatively charged colloidal sol? Give reason. [CBSE Delhi 2015]

Solution.

BaCl2, Ba2+ ion has greater coagulating power than K+ ion as Ba2+ ion has higher charge.

Teacher's Note: Coagulating power rises with the charge on the ion that is opposite to the sol's charge.

Exam Note: Choose the barium salt and cite higher charge on its cation.

Question 4. Define desorption. [CBSE Delhi 2011]

Solution.

The process of removal of an adsorbed substance from a surface on which it is adsorbed is called desorption.

Teacher's Note: Desorption is the reverse of adsorption, removing the adsorbed substance from the surface.

Exam Note: Define as removal of an adsorbed substance from the surface.

Question 5. What is the effect of temperature on chemisorption? [CBSE (AI) 2014]

Solution.

Chemisorption initially increases then decreases with rise in temperature. The initial increase is due to the fact that heat supplied acts as activation energy. The decrease afterwards is due to the exothermic nature of adsorption equilibrium.

Teacher's Note: Chemisorption needs activation energy, so extent first rises with temperature and then falls.

Exam Note: Write rise then fall, not a steady increase.

Question 6. Give one example each of sol and gel. [CBSE Delhi 2014]

Solution.

Sol: Paints, cell fluids Gel: Butter, cheese

Teacher's Note: A sol is a solid dispersed in liquid, and a gel is a liquid dispersed in a solid.

Exam Note: Give one correct example of each as per the answer.

Question 7. What is the type of charge on AgI colloidal sol formed when AgNO3 solution is added to KI solution? [CBSE Bhubaneshwar 2015]

Solution.

Negatively charged sol, AgI/I– is formed when AgNO3 solution is added to KI solution.

Teacher's Note: Adsorption of iodide ions from excess KI gives the sol a negative charge.

Exam Note: State negative charge, and the I- ions adsorbed on AgI.

Question 8. What is the ‘coagulation’ process? [CBSE (AI) 2009, 2010]

Solution.

The process of settling of colloidal particles is called coagulation.

Teacher's Note: Coagulation is the settling of colloidal particles after their charge is neutralised.

Exam Note: Define with the idea of aggregation and precipitation.

Question 9. What is an emulsion? [CBSE (AI) 2009]

Solution.

Emulsion is a colloidal solution in which both the dispersed phase and dispersion medium are liquids, e.g., milk, cod liver oil, etc.

Teacher's Note: An emulsion is a colloid of two liquids, one dispersed in the other.

Exam Note: Say both phases are liquids, with an example.

Question 10. What are lyophobic colloids? Give one example for them. [CBSE (AI) 2011]

Solution.

Lyophobic sols are those sols in which the particles of the dispersed phase have little affinity for the particles of the dispersion medium, e.g., sols of metal and their sulphides and hydroxides.

Teacher's Note: Lyophobic colloids have little attraction between particles and the medium, so they are unstable and need stabilisers.

Exam Note: Define as solvent-hating and give an example such as metal sols.

Question 11. Give one example each of lyophobic sol and lyophilic sol. [CBSE Delhi 2014]

Solution.

Lyophobic sol — Gold sol, As2S3 sol

Lyophilic sol — Sol of starch, sol of gum

Teacher's Note: Gold and arsenic sulphide sols are lyophobic, while starch and similar sols are lyophilic.

Exam Note: Give one example for each type correctly.

Question 12. Based on the type of dispersed phase, what type of colloid is micelles? [CBSE (F) 2014]

Solution.

Associated colloids

Teacher's Note: Micelles are formed by association of molecules, so they are called associated colloids.

Exam Note: Write associated colloids.

Question 13. Name the temperature above which the formation of micelles takes place. [CBSE (F) 2014]

Solution.

Kraft temperature.

Teacher's Note: Micelle formation occurs only above a certain temperature.

Exam Note: Name Kraft temperature.

Question 14. Define ‘peptization’. [CBSE Delhi 2011, (AI) 2012]

Solution.

The process of converting a precipitate into colloidal sol by shaking it with dispersion medium in the presence of small amount of electrolyte is called peptization.

Teacher's Note: Peptization turns a freshly formed precipitate into a colloidal sol with a small amount of electrolyte.

Exam Note: Define with shaking with a peptising agent such as electrolyte.

Question 15. Write the dispersed phase and dispersion medium of butter. [CBSE Patna 2015]

Solution.

Dispersed phase : Liquid

Dispersion medium : Solid

Teacher's Note: In butter, a liquid is spread through a solid medium.

Exam Note: Write each phase separately as in the answer.

Question 16. Give one example each of ‘oil in water’ and ‘water in oil’ emulsion. [CBSE Delhi 2014]

Solution.

Oil in water emulsion: milk, vanishing cream.

Water in oil emulsion: Butter, cold cream, cod liver oil.

Teacher's Note: Oil in water and water in oil are the two emulsion types, with milk and butter as common examples.

Exam Note: Give one example for each type and keep them matched properly.

Question 17. Write the main reason for the stability of colloidal sols. [CBSE Delhi 2016]

Solution.

All the particles of colloidal sol carry the same charge so they keep on repelling each other and do not aggregate together to form bigger particles.

Teacher's Note: Colloidal particles carry the same charge, so they repel and do not settle.

Exam Note: Mention same charge and mutual repulsion.

Question 18. A delta is formed at the meeting point of sea water and river water. Why? [CBSE Allahabad 2015]

Solution.

River water is a colloidal solution of clay and sea water contains a number of electrolytes. When river water meets the sea water, the electrolytes present in the sea water coagulate the colloidal solution of clay resulting in its deposition with the formation of delta.

Teacher's Note: Charged clay particles in river water are neutralised by salts in sea water, causing deposition as a delta.

Exam Note: Mention coagulation of clay sol by electrolytes of sea water.

Question 19. Write the dispersed phase and dispersion medium of smoke. [CBSE Guwahati 2015]

Solution.

Dispersed phase = Solid; Dispersion medium = Gas.

Teacher's Note: In smoke, solid particles are dispersed in a gas.

Exam Note: Write solid as dispersed phase and gas as medium.

Question 20. Write one similarity between physisorption and chemisorption. [CBSE Delhi 2017]

Solution.

Both increase with increase in surface area.

Teacher's Note: Both adsorption types depend on exposed surface area.

Exam Note: State that extent increases with surface area.

Question 21. What type of colloid is formed when a liquid is dispersed in a solid? Give an example. [CBSE (AI) 2017]

Solution.

Gel, e.g., cheese, jellies

Teacher's Note: A liquid dispersed in a solid forms a gel.

Exam Note: Name gel with an example such as cheese or jelly.

Question 22. What is the role of desorption in the process of catalysis? [CBSE (F) 2017]

Solution.

Desorption makes the surface available again for fresh adsorption of reactant molecules.

Teacher's Note: Desorption releases the products, freeing the catalyst surface for new reactant molecules.

Exam Note: Say surface becomes available for fresh adsorption of reactants.

Question 23. What is the effect of temperature on chemisorption? [CBSE (AI) 2014]

Solution.

Chemisorption initially increases then decreases with rise in temperature. The initial increase is due to the fact that heat supplied acts as activation energy. The decrease afterwards is due to the exothermic nature of adsorption equilibrium.

Teacher's Note: Chemisorption varies with temperature in a rise-then-fall pattern.

Exam Note: Write it first increases and later decreases as temperature rises.

Question 24. Give an example of shape-selective catalyst. [CBSE (F) 2010]

Solution.

ZSM–5

Teacher's Note: Shape-selective catalysts work by pore structure, with zeolites as the standard example.

Exam Note: Write ZSM-5.

Question 25. Define the term ‘Tyndall effect’. [CBSE Delhi 2009]

Solution.

The scattering of light by colloidal particles is known as Tyndall effect.

Teacher's Note: The Tyndall effect is the visible path of light scattered by colloidal particles.

Exam Note: Define as scattering of light by colloid particles making a beam visible.

Question 26. What is physical adsorption?

Solution.

If the adsorbate is held on an adsorbent surface by weak van der Waals’ forces, the adsorption is called physical adsorption.

Teacher's Note: Weak van der Waals attraction holds the adsorbate in physical adsorption.

Exam Note: Define using weak van der Waals forces.

Question 27. What is meant by chemical adsorption?

Solution.

If the adsorbate is held on the surface of the adsorbent as a result of chemical reaction forming surface compounds, it is called chemical adsorption.

Teacher's Note: In chemical adsorption, chemical bonds hold the adsorbate to the surface.

Exam Note: Define using chemical bond formation.

Question 28. What is sorption?

Solution.

Sorption is the process in which adsorption and absorption take place simultaneously, e.g., dyeing of cotton fibres by azo dyes.

Teacher's Note: Sorption covers adsorption and absorption occurring together.

Exam Note: Define as both adsorption and absorption occurring simultaneously.

Question 29. What is ‘occlusion’?

Solution.

The adsorption of gases on the surface of metals is called occlusion.

Teacher's Note: Occlusion is adsorption of gases on metal surfaces; gases like hydrogen are held by palladium.

Exam Note: Define as uptake of gases by metals, such as hydrogen by palladium.

Question 30. How is adsorption of a gas related to its critical temperature?

Solution.

Higher is the critical temperature of a gas, greater is the ease of liquefication, i.e., greater are the van der Waals’ forces of attraction and hence greater is the adsorption.

Teacher's Note: Gases with higher critical temperature liquefy more easily and so are adsorbed more.

Exam Note: State greater critical temperature, greater adsorption.

Question 31. Adsorption of a gas on the surface of solid is generally accompanied by a decrease in entropy still it is a spontaneous process. Why? [HOTS]

Solution.

According to the equation

ΔG = ΔH – TΔS

For a process to be spontaneous, ΔG should be negative. Even though ΔS is negative here, ΔG is negative because reaction is highly exothermic, i.e., ΔH is negative.

Teacher's Note: For spontaneity ΔG must be negative, and adsorption has a large negative ΔH that outweighs the entropy decrease.

Exam Note: Use ΔG = ΔH - TΔS and mention exothermic nature.

Question 32. Which will be adsorbed more readily on the surface of charcoal and why: NH3 or CO2? [HOTS]

Solution.

NH3 has higher critical temperature than CO2, i.e., NH3 is more liquefiable than CO2. Hence, NH3 has greater intermolecular forces of attraction and hence will be adsorbed more readily.

Teacher's Note: The more easily liquefied gas is adsorbed more, which depends on critical temperature.

Exam Note: Pick the gas as given and justify by ease of liquefaction.

Question 33. How does a catalyst work?

Solution.

Catalysts provide an alternate path involving lower activation energy for the reactants.

Teacher's Note: A catalyst offers a lower-energy route, so more molecules react at the same temperature.

Exam Note: Mention alternate path and lower activation energy.

Question 34. Why is desorption important for a substance to act as good catalyst? [NCERT Exemplar]

Solution.

After the completion of reaction between adsorbed reactants, the process of desorption is important to remove products and further create space for the other reactant molecules to approach the surface and react.

Teacher's Note: Desorption clears the active sites after reaction so new reactants can bind.

Exam Note: Explain that products must leave for the catalyst to keep working.

Question 35. What is the role of diffusion in heterogenous catalysis? [NCERT Exemplar]

Solution.

The gaseous molecules diffuse on to the surface of the solid catalyst and get adsorbed. After the required chemical changes, the products diffuse away from the surface of the catalyst leaving the surface free for more reactant molecules to get adsorbed and undergo reaction.

Teacher's Note: In heterogeneous catalysis, reactants must reach the surface and products must leave it.

Exam Note: Mention diffusion of molecules to the surface and away after reaction.

Question 36. Define colloidal solution.

Solution.

A colloidal solution is a state in which the particle size lies between 1 nm and 1000 nm. It appears to be homogeneous but actually it is heterogeneous.

Teacher's Note: Colloidal particles are intermediate in size between true solution and suspension particles.

Exam Note: Give the size range of about 1 to 1000 nm.

Question 37. In what way is a sol different from a gel?

Solution.

Colloidal system in which solid is dispersed in liquid is called sol and that in which liquid is dispersed in solid is called gel.

Teacher's Note: Both sol and gel are colloids but have different dispersed phase and medium.

Exam Note: State solid in liquid for sol and liquid in solid for gel.

Question 38. Why is a colloidal sol stable?

Solution.

All the particles in a colloidal sol carry the same charge and hence keep on repelling each other and cannot aggregate together to form bigger particles.

Teacher's Note: Sol particles carry like charge and repel, so they remain stable.

Exam Note: Mention same charge and repulsion.

Question 39. What is collodion? [NCERT Exemplar]

Solution.

It is a 4% solution of nitrocellulose in a mixture of alcohol and ether.

Teacher's Note: Collodion is a nitrocellulose solution in alcohol and ether.

Exam Note: Quote 4 per cent nitrocellulose in alcohol and ether.

Question 40. What is the principle of dialysis?

Solution.

Dialysis is based on the principle that ions can pass through semipermeable membrane whereas colloidal particles cannot pass through it.

Teacher's Note: Dialysis separates ions through a semipermeable membrane while colloid particles stay behind.

Exam Note: State ions diffuse through the membrane, colloidal particles do not.

Question 41. What happens when dialysis is prolonged? [NCERT Exemplar]

Solution.

Due to excessive dialysis, traces of electrolyte which stabilises the colloids is removed completely, making the colloid unstable. As a result, coagulation takes place.

Teacher's Note: Excess dialysis removes the stabilising electrolyte, so the sol may coagulate.

Exam Note: Note loss of stabilising electrolyte leading to coagulation.

Question 42. What happens when an electric field is applied to a colloidal dispersion? [NCERT Exemplar]

Solution.

The colloidal particles move towards the oppositely charged electrode and get neutralised and coagulated there.

Teacher's Note: Charged colloidal particles migrate towards the oppositely charged electrode in an electric field.

Exam Note: Write electrophoresis and direction of movement.

Question 43. What is electrodialysis?

Solution.

It is a process by which colloidal solutions containing ionic impurities are purified. The colloidal solution containing ionic impurities is placed in a bag of parchment paper in distilled water in electric field. The ions come out through parchment paper and the sol is purified.

Teacher's Note: Electrodialysis speeds up dialysis by applying an electric field to remove ionic impurities.

Exam Note: Define as dialysis with an electric field to remove ions faster.

Question 44. Define ultrafiltration.

Solution.

In this process, colloidal solutions are purified by carrying out filtration through special types of graded filters called ultra-filters. Filter paper allows the passage of electrolyte but does not allow the passage of colloidal particles.

Teacher's Note: Ultrafiltration purifies colloids by filtering through special membranes.

Exam Note: Mention filters of reduced pore size that hold back colloid particles.

Question 45. Why do colloidal solutions exhibit Tyndall effect?

Solution.

Colloidal solutions exhibit Tyndall effect because the size of the colloidal particles (1 nm–1000 nm) is such that they can scatter light.

Teacher's Note: Colloid particles are large enough to scatter light, causing the visible beam.

Exam Note: Link particle size to scattering of light.

Question 46. What causes Brownian movement in a colloidal solution? [NCERT Exemplar]

Solution.

Unbalanced bombardment of the particles of dispersed phase by molecules of dispersion medium causes Brownian motion. This stabilizes the sol.

Teacher's Note: Brownian movement is caused by uneven collisions of medium molecules on the dispersed particles.

Exam Note: Say unbalanced bombardment by molecules of the dispersion medium.

Question 47. Give one example of positively charged sol and one example of negatively charged sol.

Solution.

Fe(OH)3 is a positively charged sol whereas As2S3 is a negatively charged colloid.

Teacher's Note: Ferric hydroxide is the usual positive sol, and arsenic sulphide is a negative sol.

Exam Note: Name one positive sol and one negative sol.

Question 48. What is the main cause of charge on a colloidal solution?

Solution.

The charge on the colloidal particles is due to adsorption of common ions of the electrolyte on the surface of the colloidal particles, e.g., Fe3+ from FeCl3 on the surface of Fe(OH)3 particles.

Teacher's Note: Colloidal particles gain charge by adsorbing ions from solution.

Exam Note: Say adsorption of ions common to the particle.

Question 49. What causes electrophoresis?

Solution.

Electrophoresis is due to charge on colloidal particles, the charged particles move towards one of the electrodes in electric field.

Teacher's Note: Electrophoresis occurs because charged colloidal particles move to the opposite electrode.

Exam Note: Link movement to charge on particles.

Question 50. How can a lyophilic sol be coagulated?

Solution.

This can be done (i) by adding an electrolyte, (ii) by adding a suitable solvent.

Teacher's Note: Lyophilic sols can be coagulated by adding electrolyte or a suitable solvent.

Exam Note: List both methods mentioned in the answer.

Question 51. Why is ferric chloride preferred over potassium chloride in case of a cut leading to bleeding? [HOTS]

Solution.

Fe3+ ion has greater coagulating power than K+ ion as ferric ion has higher charge.

Teacher's Note: A high-charge ion coagulates blood faster, helping to stop bleeding.

Exam Note: Cite Hardy-Schulze rule and greater coagulating power of Fe3+.

Question 52. What is common in aquasols and solid aerosols? How do they differ?

Solution.

Aquasol and solid aerosol both have solid as the dispersed phase. They differ in dispersion medium. Aquasols have water as the dispersion medium while aerosols have gas as the dispersion medium.

Teacher's Note: Both have solid as the dispersed phase but differ in the dispersion medium.

Exam Note: Name the common phase and the different media.

Question 53. How will you distinguish between dispersed phase and dispersion medium in an emulsion? [NCERT Exemplar]

Solution.

On adding dispersion medium, emulsions can be diluted to any extent. The dispersed phase forms a separate layer if added in excess.

Teacher's Note: An emulsion is diluted only by its own dispersion medium, which identifies that phase.

Exam Note: Describe the dilution test as in the answer.

Question 54. Why are some medicines more effective in the colloidal form? [NCERT Exemplar]

Solution.

Medicines are more effective in the colloidal form because of large surface area and are easily assimilated in this form.

Teacher's Note: Colloidal medicines have a large surface area, so they are absorbed and act better.

Exam Note: Mention large surface area and greater effectiveness.

Question 55. It is possible to cause artificial rain by spraying silver iodide on the clouds. Comment. [NCERT Exemplar] [HOTS]

Solution.

Yes. Clouds are colloidal in nature and carry charge. Spray of silver iodide, an electrolyte, results in coagulation leading to rain.

Teacher's Note: Clouds are charged colloids, and silver iodide neutralises their charge leading to rain.

Exam Note: Answer yes and explain charge neutralisation causing droplets to aggregate.

Question 56. What happens when gelatin is added to gold sol? [NCERT Exemplar]

Solution.

Gold sol which is lyophobic starts behaving like a lyophilic colloid when gelatin is added to it.

Teacher's Note: Gelatin protects the lyophobic gold sol, making it behave like a lyophilic one.

Exam Note: Mention protective colloid action of gelatin.

Question 57. What is Kraft temperature?

Solution.

Kraft temperature is the minimum temperature above which the formation of micelles takes place.

Teacher's Note: Kraft temperature is the minimum temperature for micelle formation.

Exam Note: Define as the minimum temperature for micelle formation.

Question 58. Write two differences between sols and emulsions.

Solution.

(i) Sols are dispersions of solids in liquids while emulsions are dispersions of liquids in liquids.

(ii) Sols are quite stable whereas emulsions are less stable.

Teacher's Note: Sols and emulsions differ in dispersed phase and medium.

Exam Note: Write two differences, with correct phases for each.

Question 59. How do emulsifying agents stabilise the emulsion? [NCERT Exemplar]

Solution.

The emulsifying agent forms an interfacial layer between suspended particles and the dispersion medium thereby stabilising the emulsion.

Teacher's Note: Emulsifying agents form a protective layer at the interface that stops droplets from merging.

Exam Note: Mention interfacial layer and prevention of coalescence.

Question 60. Which of the following is most effective electrolyte in the coagulation of AgI/Ag+ sol? K2SO4, MgCl2, K4[Fe(CN)6] [CBSE Sample Paper 2014]

Solution.

K4[Fe(CN)6]

Teacher's Note: The sol is positive, so the anion with the highest charge coagulates it most effectively.

Exam Note: Pick the answer given and cite Hardy-Schulze rule.

Question 61. What is shape-selective catalysis? [CBSE Sample Paper 2016]

Solution.

The catalytic reaction which depends upon the pore structure of the catalyst and the size of the reactant and product molecules is called shape-selective catalysis. Zeolites are good shape-selective catalysts.

Teacher's Note: Shape-selective catalysis depends on the pore size of the catalyst and the shape of molecules.

Exam Note: Define using pore structure and example zeolites.

Question 62. Give the expression of Freundlich isotherms.

Solution.

x/m = kp1/n or log (x/m) = log k + (1/n) log p

where m is the mass of the adsorbent and x is the mass of adsorbate, p is the pressure of the gas, and k and n are constants for a given adsorbent and gas at a particular temperature (n > 1).

Teacher's Note: Adsorption per unit mass rises with pressure as a fractional power.

Exam Note: Write both forms of the equation.

Question 63. Indicate a chemical reaction involving a homogeneous catalyst.

Solution.

2SO2(g) + O2(g) → 2SO3(g) (catalyst: NO(g))

Teacher's Note: Reactants and catalyst are all gases, so the catalyst is in the same phase.

Exam Note: Name the catalyst above the arrow.

Step-by-Step Xam Idea Solutions for Class 12 Math

Complete Math Solutions for Xam Idea Solutions Class 12 Chemistry Chapter 5 Surface Chemistry Very Short Answer Questions

Access the complete chapter-wise PDF for Xam Idea Solutions Class 12 Chemistry Chapter 5 Surface Chemistry Very Short Answer Questions. These structured Xam Idea Solutions solutions for Class 12 Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.

Mastering Core Concepts with Xam Idea Solutions

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Explore More Study Resources for Class 12 Math

Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.

FAQs

What are these [current-page:node:field_author] Solutions for Class 12 Chemistry?

They are chapter-wise solved questions from the book for Class 12 Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 12 Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 12 Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 12 Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 12 Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.