Xam Idea Solutions Class 12 Chemistry Chapter 5 Surface Chemistry Short Answer Questions II

Solutions for Class 12 Chemistry: Chapter 05 Surface Chemistry

Access comprehensive textbook solutions for Chapter 05 Surface Chemistry using the reference material for Class 12 Chemistry. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.

Practice Class 12 Chemistry Solutions: Chapter 05 Surface Chemistry

Navigate directly to the solved Chemistry textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.

Short Answer Questions II

Question 1. Define adsorption with an example. Why is adsorption exothermic in nature? Write the types of adsorption based on the nature of forces between adsorbate and adsorbent. [CBSE Ajmer 2015]

Solution.

The accumulation of the molecular species at the surface rather than in the bulk of a solid or liquid is known as adsorption. For example, water vapour are adsorbed by silica gel.

When a gas is adsorbed on the surface of a solid its entropy decreases, i.e., DS becomes –ve. Since adsorption is a spontaneous process, therefore, DG (= DH – TDS) must be negative. As – TDS is +ve, DGcan be negative only if DH has sufficiently high –ve value. Hence, adsorption is exothermic in nature.

There are two types of adsorption based on the nature of forces between adsorbate and adsorbent.

i. Physical adsorption, when accumulation of gas on the surface of a solid occurs due to weak van der Waal forces. ii. Chemical adsorption, when the gas molecules or atoms are held to the surface of solid by chemical bonds.

Teacher's Note: Adsorption is the accumulation of a substance at a surface, and it releases heat, so it is exothermic.

Exam Note: Give definition, example, reason for exothermic nature and the two types.

Question 2. Answer the following questions.

Production of vacuum

Solution.

Production of Vacuum: Adsorption can be successfully applied to create conditions of high vacuum. For this, a bulb of charcoal cooled in liquid air, is connected to vessel which has already been exhausted as far as possible by vacuum pump. The remaining traces of air inspite of low pressure are adsorbed by the charcoal almost completely

Q. Heterogeneous catalysis

Ans. Heterogeneous Catalysis: There are many gaseous reactions of industrial importance involving solid catalyst. Manufacture of ammonia using iron as a catalyst, manufacture of H2SO4 by contact process using V2O5catalyst and use of finely divided nickel in the hydrogenation of vegetable oils are the excellent examples. The gaseous reactants are adsorbed on the surface of the solid catalyst. As a result, the concentration of the reactants increases on the surface of the catalyst and hence the rate of reaction increases.

Q. Froth Floatation process

[CBSE Delhi 2011; (F) 2011]

Ans. Froth Floatation Process: In froth floatation process, the powdered ore is mixed with water. It is then mixed with pine oil (a frother). The oil particles are adsorbed on the surface of ore particles. Now a stream of air is blown through the mixture from below when froth is formed at the water surface. The ore particles stick to the bubbles of the air rises to surface along with the foam while the gangue particles which are wetted by water settle at the bottom. The foam is separated out and is collected and in the course, the ore particles also settle down.

Teacher's Note: Adsorption is used to create vacuum by removing gas molecules.

Exam Note: Describe it as an application with an example.

Question 3. Classify colloids where the dispersion medium is water. State their characteristics and write an example of each of these classes. [CBSE (AI) 2011; (F) 2012]

Solution.

These are of two types:

i. HydrophilicStability: More stable as the stability is due to charge and water envelope surrounding the sol particles. Nature: Reversible Examples: Starch, gum, etc. ii. HydrophobicStability: Less stable as the stability is due to charge only. Nature: Irreversible Examples: Metal hydroxide like Fe(OH)3 and metal sulphide like As2S3.

Teacher's Note: Colloids in water are lyophilic and lyophobic in type, which differ in stability and preparation.

Exam Note: Give stability, characteristics and example for both types.

Question 4. Answer the following questions.

Differentiate between adsorption and absorption.

Solution.

S.No.AdsorptionAbsorption
(i)It is a surface phenomenon. Adsorbate molecules are held at the surface of adsorbent.m o Absorption occurs in the bulk of absorbing c substance. . s
(ii)The concentration of the adsorbate at the adsorbent surface is much more than that in the bulk.n o Absorbed material is uniformly distributed i t throughout the bulk. Thus, concentration is u l same throughout. o
(iii)Initially, rate of adsorption is rapid. It o decreases slowly till equilibrium is b t attained. r e c n Example: Water vapours on silica gel. . ws k o Absorption occurs with uniform rate. Example:Water vapours are absorbed by anhydrous CaCl . 2
w
Q.w Out of MgCl and AlCl , which one is more effective in causing coagulation of 2 3
/ negatively charged sol and why? /

[CBSE Patna 2015]

Ans. Peptization: The process of converting a precipitate into colloidal sol by shaking it with dispersion medium in the presence of a small amount of suitable electrolyte is called peptization. During peptization, the precipitate absorbs one of the ions of the electrolyte on its surface. This causes development of positive or negative charge on precipitates, which ultimately break up into particles of colloidal dimension.

Q. Multimolecular colloids

[CBSE Patna 2015]

Ans. Multimolecular colloids: A large number of atoms or smaller molecules (diameter < 1 nm) of a substance on dissolution aggregate together to form species having size in the colloidal range. Such species are called multimolecular colloids. Examples: a sulphur sol consist of particles containing thousands of S8 sulphur molecules, a platinum or gold sol may have particles of various sizes having many atoms.

Teacher's Note: Adsorption is a surface effect while absorption occurs throughout the bulk.

Exam Note: Present a table, with surface versus bulk.

Question 5. Differentiate among a homogeneous solution, a suspension and a colloidal solution, giving a suitable example of each. [CBSE (F) 2012]

Solution.

S.No.Property. Homogeneous w solutionColloidal solutionSuspension
(i)w w Particle size / / :Less than 1nmBetween 1 nm to 1000 nmMore than 1000 nm
(ii)s p t t Separation by h l ordinary filtration l ultra filtrationNot possible Not possibleNot possible PossiblePossible Possible
(iii)Settling of particlesDo not settleSettle only on coagulationSettle under gravity
(iv)AppearanceTransparentOpaqueTranslucent
(v)ExampleGlucose dissolved in waterSmoke, milk, gold solSand in water
Q.8.

[CBSE (AI) 2012]

Ans. The cleansing action of soap such as sodium stearate is due to the fact that soap molecules form micelle around the oil droplet in such a way that hydrophobic part of the stearate ions is in the oil droplet and hydrophilic part projects out of the grease droplet like the bristles. Since the polar groups can interact with water, the oil droplet surrounded by stearate ions is now pulled in water and removed from the dirty surface. Thus, soap helps in emulsification and washing away of oils and fats.

Hard water contains calcium and magnesium salts. In hard water, soap gets precipitated as calcium and magnesium soap which being insoluble stick to the clothes as gummy mass. Therefore, soaps do not work in hard water.

Teacher's Note: True solutions, colloids and suspensions differ in particle size, stability and visibility.

Exam Note: Give a table with particle size, filtration and Tyndall effect, plus examples.

Question 6. Define the following terms giving one suitable example for each:

Electrophoresis

Solution.

The movement of colloidal particles towards oppositely charged electrodes in an electric field is called electrophoresis.

Q. Micelles

Ans. There are some substances such as soap which at low concentration behave as normal electrolytes, but at higher concentration exhibit colloidal behaviour due to the formation of aggregates. The aggregated particles thus formed are known as micelles or associated colloids.

Q. Peptization

Ans. The process of converting a precipitate into colloidal solution by shaking it with dispersion medium in the presence of small amount of electrolyte is called peptization.

Teacher's Note: Electrophoresis is the movement of charged colloidal particles under an electric field.

Exam Note: Define it with an example and the direction of movement.

Question 7. What are emulsions? What are their different types? Give one example of each type. [CBSE (AI) 2014]

Solution.

Emulsions are the colloidal solutions in which both the dispersed phase and dispersion medium are liquids. Emulsion can be classified into two types. These are:

i. Oil in water (O/W) type emulsion: In this type of emulsions oil acts as disperse phase and water acts as dispersion medium e.g., milk, vanishing cream. ii. Water in oil (W/O) type emulsion: In this type of emulsions water acts as disperse phase and oil acts as dispersion medium e.g., butter, cod liver oil, cold cream.

Teacher's Note: Emulsions are liquid-in-liquid colloids of two types, oil in water and water in oil.

Exam Note: Define emulsions and give an example of each type.

Question 8. How do size of particles of adsorbent, pressure of gas and prevailing temperature influence the extent of adsorption of a gas on a solid?

Solution.

The influence is in the following ways:

i. Smaller the size of the particles of the adsorbent, greater is the surface area and greater is the adsorption. ii. At constant temperature, adsorption first increases with increase of pressure and then attains equilibrium at a high pressure. iii. In physical adsorption, it decreases with increase of temperature but in chemisorption, first it increases and then decreases.

Teacher's Note: Adsorption varies with surface area, pressure and temperature.

Exam Note: Address all three factors separately.

Question 9. How does a solid catalyst enhance the rate of combination of gaseous molecules? [NCERT Exemplar]

Solution.

When gaseous molecules come in contact with the surface of a solid catalyst, adsorption of gaseous molecules takes place at the surface of the catalyst. It increases the concentration of reactants on the surface. Different molecules adsorbed side by side have better chance to react and form new molecules. This enhances the rate of reaction. Also, adsorption is an exothermic process. The heat released in the process of adsorption is utilised in enhancing the reaction rate.

Teacher's Note: A solid catalyst adsorbs gaseous molecules on its surface, bringing them close to react.

Exam Note: Mention adsorption, increased concentration at surface and lower activation energy.

Question 10. Explain the following observations: [HOTS]

Sun looks red at the time of setting.

Solution.

At the time of setting, the sun is at horizon. The light emitted by the sun has to travel a relatively longer distance through the atmosphere. As a result, blue part of light is scattered away by the particulate in the atmosphere causing red part to be visible.

Q. Sun looks red at the time of setting.

Ans. At the time of setting, the sun is at horizon. The light emitted by the sun has to travel a relatively longer distance through the atmosphere. As a result, blue part of light is scattered away by the particulate in the atmosphere causing red part to be visible.

Q. Cottrell’s smoke precipitator is fitted at the mouth of the chimney used in factories.

Ans. Cottrell’s smoke precipitator, neutralises the charge on unburnt carbon particles, coming out of chimney and they get precipitated and settle down at the floor of the chamber.]

Q. Physical adsorption is multilayered while chemical adsorption is monolayered.

[HOTS]

Ans. Physical adsorption involves van der Waals’ forces, so any number of layers may be formed one over the other on the surface of the adsorbent. Chemical adsorption takes place as a result of the reaction between adsorbent and adsorbate. When the surface of adsorbent is covered with one layer, no further reaction can take place.

Teacher's Note: Scattering of light explains the sun's red colour at sunset.

Exam Note: Explain with scattering of blue light and longer path through the atmosphere.

Question 11. What type of colloidal sols are formed in the following: i. Sulphur vapours are passed through cold water. ii. White of an egg is mixed with water. iii. Soap solution.

Solution.

i. Multimolecular because sulphur molecules associate together to form multimolecular colloids. ii. Macromolecular because protein molecules present in the white of the egg are macromolecules soluble in water. Associated because RCOO– ions associate together to form micelles. iii.

Teacher's Note: Colloidal types depend on the process of formation, such as molecule association.

Exam Note: Name the type for each case with a reason.

Question 12. Answer the foolowing questions.

What are micelles? How do they differ from ordinary colloidal particles? Give two examples of micelle forming substances.

Solution.

There are some substances which at low concentration behave as normal electrolyte but at higher concentrations exhibit colloidal behaviour due to formation of aggregated particles. The aggregated particles thus formed are called micelles. Surface active agents such as soaps and detergents are the example of micelle forming substances.

The formation of micelles takes place only above a particular temperature called Kraft temperature and above a particular concentration called critical micelle concentration (CMC). On dilution, these colloids revert back to individual ions.

Q. State Hardy–Schulze rule.

Ans. Hardy and Schulze rules:

i. The ions carrying charge opposite to that of sol particles are effective in bringing about the coagulation of sol. ii. Coagulating power of the electrolyte is directly proportional to the fourth power of the valency of the ions causing coagulation.

Teacher's Note: Micelles are aggregates formed by soap-like molecules above a certain concentration.

Exam Note: Define micelle, give the example and differ from ordinary colloidal particles.

Question 13. Answer the following questions.

Why does leather get hardened after tanning?

Solution.

Animal hides are colloidal in nature. When a hide, which has positively charged particles, is soaked in tannin, which contains negatively charged colloidal particles, mutual coagulation takes place. This results in the hardening of leather.

Q. On the basis of Hardy-Schulze rule explain why the coagulating power of phosphate is higher than chloride.

Ans. Greater the valency of flocculating ion added, greater is its power to cause coagulation. Thus, for the coagulation of a positively charged sol PO43– ion has higher coagulating power than Cl– ion.

Q. Do the vital functions of the body such as digestion get affected during fever? Explain your answer.

[CBSE Sample Paper 2017]

Ans. The optimum temperature for enzymatic activity is 298-310K. On either side of this range enzyme activity decreases, that is why vital function of the body such as digestion get affected during fever.

Teacher's Note: Tanning hardens leather because the charged hide colloid is coagulated by tannin.

Exam Note: Explain coagulation of hide colloid by oppositely charged tannin.

Question 14. Define the following terms:Q. Homogeneous catalysis

Solution.

In a catalysis process if the catalyst and the reactants are in the same phase (liquid or gas), the process is said to be homogeneous catalysis. For example, oxidation of SO2 to SO3 with O2 in the presence of NO as a catalyst.

Q. Coagulation

Ans. The process of settling of colloidal particles forming a precipitate is called coagulation.

Q. Macromolecular colloids

Ans. Macromolecules in a suitable solvent form solutions in which the size of the macromolecules may be in colloidal range. Such colloids are called macromolecular colloids. These colloids are quite stable and resemble true solutions in many respects, e.g., starch dispersed in water.

Teacher's Note: Definitions only; give an example where asked.

Exam Note: Define each term in one line.

Question 15. Out of MgCl2 and AlCl3, which one is more effective in causing coagulation of negatively charged sol and why?

Solution.

AlCl3 is more effective in causing coagulation of negatively charged sol as Al3+ ion has greater positive charge than Mg2+ ion.

Teacher's Note: Hardy–Schulze rule: higher charge on the oppositely charged ion coagulates better.

Exam Note: Quote Hardy–Schulze rule.

Question 16. Define the following terms:Q. Brownian movement [CBSE Patna 2015]

Solution.

Brownian movement: The motion of the colloidal particles in a zig-zag path due to unbalanced bombardment by the particles of dispersion medium is called Brownian movement.

Q. Peptization [CBSE Patna 2015]

Ans. Peptization: The process of converting a precipitate into colloidal sol by shaking it with dispersion medium in the presence of a small amount of suitable electrolyte is called peptization. During peptization, the precipitate adsorbs one of the ions of the electrolyte on its surface. This causes development of positive or negative charge on precipitates, which ultimately break up into particles of colloidal dimension.

Q. Multimolecular colloids [CBSE Patna 2015]

Ans. Multimolecular colloids: A large number of atoms or smaller molecules (diameter < 1 nm) of a substance on dissolution aggregate together to form species having size in the colloidal range. Such species are called multimolecular colloids. Examples: a sulphur sol consists of particles containing thousands of S8 sulphur molecules, a platinum or gold sol may have particles of various sizes having many atoms.

Teacher's Note: Brownian motion is random zig-zag motion; peptisation turns a precipitate into a sol.

Exam Note: Define each term with an example.

Question 17. Explain the cleansing action of soap. Why do soaps not work in hard water? [CBSE (AI) 2012]

Solution.

The cleansing action of soap such as sodium stearate is due to the fact that soap molecules form micelle around the oil droplet in such a way that hydrophobic part of the stearate ions is in the oil droplet and hydrophilic part projects out of the grease droplet like the bristles. Since the polar groups can interact with water, the oil droplet surrounded by stearate ions is now pulled in water and removed from the dirty surface. Thus, soap helps in emulsification and washing away of oils and fats.

Hard water contains calcium and magnesium salts. In hard water, soap gets precipitated as calcium and magnesium soap which being insoluble stick to the clothes as gummy mass. Therefore, soaps do not work in hard water.

Teacher's Note: Soap forms micelles around grease; calcium and magnesium soaps are insoluble.

Exam Note: Explain micelle formation, then hard water.

Question 18. Answer the following questions.Q. Write the dispersed phase and dispersion medium of milk.

Solution.

Both the dispersed phase and dispersion medium of milk are liquid.

Q. Write one similarity between physisorption and chemisorption.

Ans. Both the physisorption and chemisorption increase with increase in surface area.

Q. Write the chemical method by which Fe(OH)3 sol is prepared from FeCl3. [CBSE (AI) 2017]

Ans. Hydrolysis: FeCl3 + 3H2O → Fe(OH)3(sol) + 3HCl. The Fe(OH)3 molecules formed as a result of hydrolysis of FeCl3 aggregate leading to the formation of sol.

Teacher's Note: Milk is an emulsion of liquid fat in water.

Exam Note: Name both phases for milk.

Question 19. Write one difference in each of the following:Q. Lyophobic sol and Lyophilic sol

Solution.

Lyophobic SolLyophilic Sol
(i)Solvent hating; irreversible in natureSolvent loving; reversible in nature (Any one)

Q. Solution and Colloid

SolutionColloid
(ii)Homogeneous mixture; does not show Tyndall effectHeterogeneous mixture; shows Tyndall effect (Any one)

Q. Homogeneous catalysis and Heterogeneous catalysis [CBSE Delhi 2017]

Homogeneous catalysisHeterogeneous catalysis
(iii)Reactants and catalyst are in same phase. 2SO2(g) + O2(g) → 2SO3(g) (catalyst: NO) (Any one)Reactants and catalyst are not in same phase. N2(g) + 3H2(g) → 2NH3(g) (catalyst: Fe) (Any one)

Teacher's Note: A colloid scatters light (Tyndall effect); a true solution does not.

Exam Note: Give one clear difference per pair.

Question 20. Answer the following questions.Q. Out of silica gel and anhydrous CaCl2, which will adsorb the water vapours?

Solution.

Silica gel

Q. Out of H2SO4 and H3PO4, which one is more effective in causing coagulation of positively charged sol? Give reason.

Ans. H3PO4, as PO43− ion has greater negative charge than SO42−.

Q. Out of sulphur sol and proteins, which one forms macromolecular colloids? [CBSE South 2016]

Ans. Proteins

Teacher's Note: Anhydrous CaCl2 absorbs water; silica gel only holds it on its surface.

Exam Note: Link coagulation power to ion charge.

Question 21. Consider the adsorption isotherms given alongside and interpret the variation in the extent of adsorption (x/m) when i. (a) temperature increases at constant pressure. (b) pressure increases at constant temperature. ii. Name the catalyst and the promoter used in Haber’s process for manufacture of ammonia. [HOTS]

195 K244 K273 Kp →x/myx

Solution.

i. (a) At constant pressure, extent of adsorption (x/m) decreases with increase in temperature as adsorption is an exothermic process.

(b) At constant temperature, first adsorption (x/m) increases with increase in pressure up to a particular pressure and then it remains constant.

ii. Finely divided iron is used as a catalyst and molybdenum is used as promoter.

Teacher's Note: Adsorption is exothermic, so it falls with temperature and saturates at high pressure.

Exam Note: Read each curve, then name Fe and Mo.

Question 22. SnO2 forms a positively charged colloidal sol in acidic medium and a negatively charged sol in the basic medium. Why? Explain. [HOTS]

Solution.

SnO2 is amphoteric in nature. In acidic medium it reacts with acids such as HCl to form SnCl4 in the solution. The common Sn4+ ions are adsorbed on the surface of SnO2 particles to give a positively charged colloidal sol.

In basic medium it reacts with a base such as NaOH to form sodium stannate (Na2SnO3) in the solution. The common stannate (SnO32−) ions are adsorbed on the surface of SnO2 particles to give a negatively charged colloidal sol.

Teacher's Note: An amphoteric oxide adsorbs the cation in acid and the anion in base.

Exam Note: Mention the common ion adsorbed.

Question 23. Answer the following questions.Q. In reference to Freundlich adsorption isotherm write the expression for adsorption of gases on solids in the form of an equation.

Solution.

Freundlich adsorption isotherm equation for adsorption of gases on solids: x/m = kp1/n

where x is the mass of the gas adsorbed on mass m of the adsorbent at pressure p, k and n are constants which depend on the nature of the gas and adsorbent at a particular temperature.

Q. Write an important characteristic of lyophilic sols.

Ans. Important characteristics of lyophilic sols: (a) They are reversible in nature, i.e., once the dispersed phase is separated from dispersion medium the sol can be made again by simply remixing with dispersion medium. (b) They are quite stable and are not easily coagulated.

Q. Based on type of particles of dispersed phase, give one example each of associated colloid and multimolecular colloid.

Type of ColloidExample
Associated colloidSurface active agents such as soap and synthetic detergents (above CMC)
Multimolecular colloidSulphur sol, gold sol

Teacher's Note: Freundlich equation relates adsorption per unit mass to gas pressure by a power law.

Exam Note: Write x/m = kp^(1/n) and define symbols.

Question 24. Give reasons for the following: [CBSE Sample Paper 2013]Q. Rough surface of catalyst is more effective than smooth surface.

Solution.

Rough surface of a catalyst provides more surface area for adsorption.

Q. Smoke passed through charged plates before allowing it to come out of chimneys in factories.

Ans. Smoke is passed through charged plates so that unburnt charged carbon particles get settled between the charged plates leaving behind air free from pollutants.

Q. Ne gets easily adsorbed over charcoal than He.

Ans. Ne has higher critical temperature, i.e., stronger van der Waals forces, therefore easily adsorbed.

Q. Explain what is observed when [CBSE Sample Paper 2015]

Q. silver nitrate solution is added to potassium iodide solution.

Ans. If silver nitrate solution is added to potassium iodide solution, the precipitated silver iodide adsorbs iodide ions from the dispersion medium and negatively charged colloidal solution results. AgI + I− → AgI/I− (negatively charged sol)

Q. the size of the finest gold sol particles increases in the gold sol.

Ans. The colour of the colloidal solution depends on the wavelength of the light scattered by the colloidal particles which in turn depends on size and nature of the colloidal particle. Finest gold sol is red in colour, as the size of the particle increases, it appears purple, then blue and finally golden.

Q. two oppositely charged sols are mixed in almost equal proportions.

Ans. Two oppositely charged sols when mixed in almost equal proportions, neutralise their charges and get partially or completely precipitated. Such type of coagulation is called mutual coagulation.

Teacher's Note: More surface means more adsorption; charged plates precipitate smoke particles (Cottrell precipitator).

Exam Note: Link each answer to surface area or charge.

Question 25. Answer the following questions: [CBSE Sample Paper 2016]Q. What happens when a freshly precipitated Fe(OH)3 is shaken with a little amount of dilute solution of FeCl3?

Solution.

It is converted into colloidal state by preferential adsorption of Fe3+ ions. Fe(OH)3 + FeCl3 → [Fe(OH)3]Fe3+ + 3Cl− (reddish brown colloid)

Q. Why are lyophilic colloidal sols more stable than lyophobic colloidal sols?

Ans. This is because the stability of lyophobic sol is only due to the presence of charge on the colloidal particles. On the other hand, the stability of lyophilic sol is due to charge on the colloidal particles as well as solvation of colloidal particles.

Q. What form Freundlich adsorption equation will take at high pressure?

Ans. Freundlich adsorption isotherm, x/m = kp1/n. At high pressure (beyond saturation pressure), 1/n = 0 and x/m = constant, i.e., the adsorption is independent of pressure. So, x/m = kp0 or x/m = k.

Teacher's Note: Peptisation turns the precipitate into a sol; solvation adds stability to lyophilic sols.

Exam Note: Mention charge plus solvation.

Class 12 Mathematics: Xam Idea Solutions for Xam Idea Solutions Class 12 Chemistry Chapter 5 Surface Chemistry Short Answer Questions II

Access Class 12 Mathematics Solutions

Explore reliable mathematical solutions for Xam Idea Solutions Class 12 Chemistry Chapter 5 Surface Chemistry Short Answer Questions II tailored for Class 12 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.

Detailed Calculation Guides for Class 12

Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.

Additional Study Materials for 2026

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these [current-page:node:field_author] Solutions for Class 12 Chemistry?

They are chapter-wise solved questions from the book for Class 12 Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 12 Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 12 Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 12 Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 12 Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.