Download Class 12 Chemistry Textbook Solutions: Chapter 05 Surface Chemistry
Access comprehensive textbook solutions for Chapter 05 Surface Chemistry using the reference material for Class 12 Chemistry. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.
Access Textbook Answers and Solutions
Navigate directly to the solved Chemistry textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.
Short Answer Questions I
Question 1. Write the differences between physisorption and chemisorption with respect to the following: i. Specificity ii. Temperature dependence iii. Reversibility and iv. Enthalpy change [CBSE Delhi 2013]
Solution.
Physisorption Chemisorption
(i) Specificity It is not specific in nature. It is highly specific in nature.
Low temperature is High temperature is favourable favourable for adsorption. It for adsorption. It increases (ii)Temperature dependence decreases with increase of with the increase of temperature. temperature.
(iii) Reversibility It is reversible in nature. It is irreversible.
Enthalpy of adsorption is low Enthalpy of adsorption is high
(iv) Enthalpy change (20–40 kJ ) in this case. (80-240 kJ mol) in this case.
Teacher's Note: Physisorption is weak and nonspecific, while chemisorption is strong and specific, so they differ in each property asked.
Exam Note: Present as a table with each asked property in a row.
Question 2. What is meant by coagulation of a colloidal solution? Describe briefly any three methods by which coagulation of lyophobic sols can be carried out. [CBSE Delhi 2012]
Solution.
The process of settling of colloidal particles through induced aggregation by the addition of some suitable electrolyte is known as coagulation. Three methods by which coagulation of lyophobic sols can be carried out are: i. Electrophoresis: During electrophoresis the colloidal particles move towards oppositely charged electrodes, get discharged and coagulated. ii. Boiling: On boiling a sol, the adsorbed layer is disturbed due to increased collision with the molecules of dispersion medium. This reduces the charge on the particles which ultimately settle down in the form of a precipitate. iii. Addition of Electrolytes: When excess of an electrolyte is added to a colloidal solution, the colloids interact with ions carrying charge opposite to that present on themselves. This causes neutralisation leading to their coagulation.
Teacher's Note: Coagulation is the settling of colloidal particles after charge is removed, which can be done by several methods.
Exam Note: Define it and describe three methods, such as electrophoresis and adding electrolytes.
Question 3. Give an example where physisorption changes to chemisorption with rise in temperature. Explain the reason for change.
Solution.
The process of physisorption, for example that of H2 on finely divided nickel, involves weak van der Waals’ forces. With increase in temperature, hydrogen molecules dissociate into hydrogen atoms which are held on the surface by chemisorption.
Teacher's Note: Physisorption can turn to chemisorption at higher temperature because activation energy becomes available.
Exam Note: Give the hydrogen on nickel example and explain with temperature.
Question 4. Answer the following questions.
How does BF3 act as a catalyst in industrial process? [NCERT Exemplar]
Solution.
It is because BF3 is an electron deficient compound and helps to generate electrophile.
Q. Give an example of shape-selective catalysis.
Ans. ZSM–5 (Zeolite Sieve with molecular porosity 5).
Teacher's Note: BF3 is an electron deficient compound, which helps it act as a catalyst.
Exam Note: Mention electron deficiency and generating a reacting species.
Question 5. Do the vital functions of the body such as digestion get affected during fever? Explain your answer. [NCERT Exemplar]
Solution.
The optimum temperature range for the activity of enzymes is 298–310 K. On either side of this temperature range, enzymatic activity gets affected. Thus, during fever, when temperature rises above 310 K, the activity of enzymes may be affected.
Teacher's Note: Enzymes work best in a narrow temperature range, so fever may affect body functions.
Exam Note: Mention optimum temperature range and effect of fever on enzymes.
Question 6. In which of the following does adsorption take place and why? i. Silica gel placed in the atmosphere saturated with water. ii. Anhydrous CaCl2 placed in the atmosphere saturated with water. [HOTS]
Solution.
i. In silica gel, adsorption takes place due to attraction and retention of water molecules on the surface.
ii. Anhydrous CaCl2 undergoes absorption because it combines with water molecules to form hydrated calcium chloride, CaCl2.2H2O.
Teacher's Note: Adsorption happens where a substance is retained on a surface rather than absorbed.
Exam Note: Check each case and say adsorption or absorption with reason.
Question 7. Which one of the following electrolytes is the most effective for the coagulation of Fe(OH)3 sol and why? NaCl, Na2SO4, Na3PO4
Solution.
Fe(OH)3 is a positively charged sol. According to Hardy–Schulze rule, greater the charge on the oppositely charged ion of the electrolyte added, more effective it is in bringing about the coagulation. Hence, Na3PO4(containing PO43– ions) is the most effective.
Teacher's Note: Hardy-Schulze rule says the ion with the highest opposite charge coagulates a sol best.
Exam Note: Name the electrolyte with the higher valent anion and quote the rule.
Question 8. Name the two groups into which phenomenon of catalysis can be divided. Give an example of each group with the chemical equation involved. [CBSE Delhi 2012]
Solution.
The two groups into which phenomenon of catalysis can be divided are:
(i) Homogeneous catalysis: When the reactants and the catalyst are in the same phase, the catalysis is said to be homogeneous catalysis. For example, SO2 is oxidised to SO3 in the presence of nitric oxide, NO as catalyst.
2SO2(g) + O2(g) → 2SO3(g) (catalyst: NO)
(ii) Heterogeneous catalysis: When the reactants are in a different phase than the catalyst, the catalysis is said to be heterogeneous. For example, the combination of dinitrogen and dihydrogen to form ammonia in the presence of finely divided iron as a catalyst.
N2(g) + 3H2(g) → 2NH3(g) (catalyst: Fe)
Teacher's Note: Catalysis is homogeneous when catalyst and reactants share a phase, otherwise heterogeneous.
Exam Note: Give one balanced equation for each.
Question 9. Answer the following questions.
Q. What happens when a freshly precipitated Fe(OH)3 is shaken with water containing a small quantity of FeCl3?
Solution.
It is converted into colloidal state.
Fe(OH)3 + FeCl3 → [Fe(OH)3]Fe3+ + 3Cl−
Q. Why is a finely divided substance more effective as an adsorbent? [CBSE (F) 2013]
Ans. Powdered substances have greater surface area as compared to their crystalline forms. Greater the surface area, greater is the adsorption.
Teacher's Note: Peptisation by Fe3+ ions gives a sol; more surface area means more adsorption.
Exam Note: Link surface area to adsorption.
Question 10. How are the following colloidal solutions prepared? i. Sulphur in water ii. Gold in water [CBSE Delhi 2013]
Solution.
i. Sulphur sol is prepared by the oxidation of H2S with SO2.
SO2 + 2H2S → 3S(sol) + 2H2O
ii. Gold sol is prepared by the reduction of AuCl3 with formaldehyde.
2AuCl3 + 3HCHO + 3H2O → 2Au(sol) + 3HCOOH + 6HCl
Teacher's Note: Sulphur sol forms by oxidation of H2S; gold sol by reduction of a gold salt.
Exam Note: Write the balanced equations.
Question 11. Physical and chemical adsorption respond differently with a rise in temperature. What is this difference and why is it so?
Solution.
Adsorption isobar for physical adsorption shows that the extent of adsorption decreases with the increase in temperature. The adsorption isobar of chemical adsorption shows that the extent of adsorption first increases and then decreases with the increase in temperature. The initial unexpected increase in the extent of adsorption with temperature is due to the fact that the heat supplied acts as activation energy required for chemical adsorption which is much more than that of physical adsorption.
Teacher's Note: Physisorption is exothermic and weakens on heating; chemisorption first needs activation energy.
Exam Note: Mention both adsorption isobars.
Question 12. A colloidal solution of AgI is prepared by two different methods as shown in figure below. [HOTS] i. What is the charge of AgI colloidal particles in the two test tubes (A) and (B)? ii. Give reasons for the origin of charge.
Solution.
i. Test tube (A) has negative charge whereas test tube (B) has positive charge on the colloidal particles.
ii. In test tube (A), I− is adsorbed on precipitate AgI [or AgI/I− is formed] and in test tube (B), Ag+ is adsorbed on precipitate AgI [or AgI/Ag+ is formed].
Teacher's Note: The precipitate adsorbs whichever ion is in excess in the solution.
Exam Note: Name the ion adsorbed in each tube.
Question 13. A colloidal solution of ferric oxide is prepared by two different methods as shown below. [HOTS]
i. What is the charge on colloidal particles in two test tubes (A) and (B)? ii. Give reasons for the origin of charge.
Solution.
i. Colloidal particles of test tube (A) are positively charged whereas colloidal particles of test tube (B) are negatively charged.
ii. In test tube (A), Fe3+ is adsorbed on the precipitate Fe2O3·xH2O [or Fe2O3·xH2O/Fe3+ is formed].
In test tube (B), OH− ion is adsorbed on the precipitate Fe2O3·xH2O [or Fe2O3·xH2O/OH− is formed].
Teacher's Note: Preferential adsorption of Fe3+ or OH− ions on the oxide gives the charge.
Exam Note: State which ion is adsorbed in each tube.
Question 14. Give reasons:
Q. Physisorption decreases with increase of temperature.
Solution.
As physisorption is an exothermic process, according to Le Chatelier’s principle, if we increase the temperature, equilibrium will shift in the backward direction, i.e., gas is released from the adsorbed surface.
Q. Gelatin which is a peptide is added in ice-creams. [NCERT Exemplar]
Ans. Ice-creams are emulsions which get stabilised by emulsifying agents like gelatin.
Teacher's Note: Heating favours the endothermic reverse step, desorption; gelatin protects the emulsion.
Exam Note: Quote Le Chatelier’s principle.
Free study material for Chemistry
Class 12 Mathematics: Xam Idea Solutions for Xam Idea Solutions Class 12 Chemistry Chapter 5 Surface Chemistry Short Answer Questions I
Complete Math Solutions for Xam Idea Solutions Class 12 Chemistry Chapter 5 Surface Chemistry Short Answer Questions I
Access the complete chapter-wise PDF for Xam Idea Solutions Class 12 Chemistry Chapter 5 Surface Chemistry Short Answer Questions I. These structured Xam Idea Solutions solutions for Class 12 Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.
Concept-Driven Math Answers
Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.
Additional Study Materials for 2026
In addition to these Xam Idea Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.
FAQs
They are chapter-wise solved questions from the book for Class 12 Chemistry. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.