Pradeep's KL Gogia Solutions Class 12 Chemistry Chapter 5 Surface Chemistry

Download Class 12 Chemistry Pradeep's KL Gogia Textbook Solutions: Chapter 05 Surface Chemistry

Review structured textbook solutions for Class 12 Chemistry Chapter 05 Surface Chemistry prepared by Pradeep's KL Gogia. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.

Access Pradeep's KL Gogia Textbook Answers and Solutions

Navigate directly to the solved Chemistry textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.

Surface Chemistry - Very Short Answer and Short Answer Questions

Very Short Answer Type Questions (1 Mark)

Question VSA 1. Why does a gas mixed with another gas not form a colloidal system?

Solution. A gaseous mixture is homogeneous, so no separate dispersed phase exists.

Teacher's Note: A colloid needs two phases; gases mix completely at molecular level.

Exam Note: State: gaseous mixture is homogeneous.

Question VSA 2. Why are adsorbate particles attracted and retained on the surface of adsorbent?

Solution. The unbalanced forces of the adsorbent surface attract and hold the adsorbate particles.

Teacher's Note: Surface atoms lack neighbours on one side, leaving residual force.

Exam Note: Mention unbalanced/residual forces on surface.

Question VSA 3. Explain the terms sorption and desorption.

Solution. Sorption is the term used when adsorption and absorption take place simultaneously. Desorption is the removal of the adsorbate from the surface of the adsorbent.

Teacher's Note: Sorption = adsorption + absorption together; desorption reverses adsorption.

Exam Note: Give both definitions in one line each.

Question VSA 4. “Chemisorption is highly specific.” Illustrate with an example.

Solution. As it involves chemical bonding between adsorbent and adsorbate, it occurs only when a bond can form. For example, hydrogen is chemisorbed on nickel (which can form a surface hydride) but not on most other surfaces.

Teacher's Note: Specificity follows from bond formation between particular adsorbent and adsorbate.

Exam Note: Link specificity to chemical bonding; cite example.

Question VSA 5. “Adsorbents in finely divided form are more effective.” Why?

Solution. Due to their more surface area in finely divided form.

Teacher's Note: Adsorption is a surface phenomenon, so more surface means more adsorption.

Exam Note: Key phrase: larger surface area.

Question VSA 6. Name two compounds used as adsorbent for controlling humidity.

Solution. Silica gel and alumina gel.

Teacher's Note: Both are porous, high-surface-area solids that adsorb water vapour.

Exam Note: Name any two: silica gel, alumina gel.

Question VSA 7. Mention one shape selective catalyst used to convert alcohol directly into gasoline.

Solution. ZSM-5.

Teacher's Note: Zeolite catalyst: reaction depends on pore size and shape.

Exam Note: Answer: ZSM-5.

Question VSA 8. ‘Generally high temperature is favourable for chemisorption.’ Why?

Solution. To provide the energy of activation.

Teacher's Note: Chemisorption needs activation energy, unlike physisorption.

Exam Note: Cite activation energy requirement.

Question VSA 9. Name the catalyst used in the following process: (a) Haber’s process for the manufacture of NH3 gas. (b) Ostwald process for the manufacture of nitric acid.

Solution. (a) Finely divided Fe (FeO), with Mo as promoter.
(b) Pt (platinised asbestos).

Teacher's Note: Haber: Fe with Mo promoter; Ostwald: platinum gauze catalyses NH3 oxidation.

Exam Note: Name catalyst and promoter for part (a).

Question VSA 10. Write Freundlich adsorption isotherm relation.

Solution. x/m = kP1/n (n > 1), or log(x/m) = log k + (1/n) log P.

Teacher's Note: Plot of log(x/m) vs log P is a straight line: slope 1/n, intercept log k.

Exam Note: Write both forms; state n > 1.

Question VSA 11. Which group elements show maximum catalytic activity for hydrogenation reactions?

Solution. Group 7–9 elements.

Teacher's Note: Transition metals like Fe, Co, Ni, Pd, Pt adsorb H2 well.

Exam Note: Answer: groups 7–9.

Question VSA 12. Why are gas masks used by miners in coal mines while working?

Solution. To adsorb poisonous gases.

Teacher's Note: Activated charcoal in the mask adsorbs toxic gases like CO.

Exam Note: Mention adsorption of poisonous gases.

Question VSA 13. Write the chemical reaction involved in the preparation of sulphur sol.

Solution. SO2 + 2H2S → 3S(sol) + 2H2O (oxidation). Corrected: the book prints the product as 2S, which does not balance; the balanced equation is given here.

Teacher's Note: Sulphur sol forms by oxidation of H2S; balance sulphur atoms.

Exam Note: Balanced equation earns the mark.

Question VSA 14. Name the enzyme which converts milk into curd.

Solution. Lactobacilli.

Teacher's Note: Bacteria-derived enzymes convert lactose to lactic acid, curdling milk.

Exam Note: One-word answer: Lactobacilli.

Question VSA 15. What are the optimum temperature and pH at which enzymes are highly active?

Solution. Temperature 298–310 K and pH 5 to 7.

Teacher's Note: Enzymes denature outside narrow temperature and pH ranges.

Exam Note: Give both temperature and pH range.

Question VSA 16. What are the physical states of dispersed phase and dispersion medium in foam rubber?

Solution. Dispersed phase: gas; dispersion medium: solid.

Teacher's Note: Foam rubber is a solid foam.

Exam Note: State phase for both components.

Question VSA 17. What is the composition of colloidion solution?

Solution. 4% solution of nitrocellulose in a mixture of alcohol and ether.

Teacher's Note: Colloidion is a lyophilic sol of nitrocellulose.

Exam Note: Give 4% and the alcohol-ether solvent.

Question VSA 18. Why do colloidal particles show Brownian movement?

Solution. Due to unbalanced bombardment of the dispersed phase particles by the molecules of the dispersion medium.

Teacher's Note: Random molecular collisions produce zig-zag motion.

Exam Note: Cite unbalanced bombardment by medium molecules.

Question VSA 19. State the sign of entropy change involved when the molecules of a substance get adsorbed on a solid surface.

Solution. ΔS = −ve (negative).

Teacher's Note: Adsorbed molecules lose freedom, so randomness decreases.

Exam Note: Sign is negative; justify by reduced randomness.

Question VSA 20. Why does sky appear blue to us?

Solution. Due to scattering of blue light by dust particles and water suspended in air.

Teacher's Note: Tyndall scattering is stronger for shorter wavelengths.

Exam Note: Mention scattering of blue light.

Question VSA 21. What happens when hydrated ferric oxide and arsenious sulphide sols are mixed in almost equal proportions?

Solution. Mutual precipitation (coagulation) takes place.

Teacher's Note: Fe(OH)3 sol is positive, As2S3 sol negative; charges neutralise.

Exam Note: Say: oppositely charged sols coagulate.

Question VSA 22. Gelatin is generally added to ice-cream. Why?

Solution. Ice-cream is an emulsion (fat dispersed in water, i.e. an oil-in-water type) and gelatin acts as an emulsifier (stabiliser). Corrected: the book calls it a water-in-oil emulsion.

Teacher's Note: Gelatin is a protective colloid that stabilises the emulsion.

Exam Note: State gelatin acts as emulsifier.

Question VSA 23. How is lake test for aluminium ion based upon adsorption?

Solution. Al2O3·xH2O has the capacity to adsorb the colour of blue litmus from the solution.

Teacher's Note: Gelatinous Al(OH)3 adsorbs the dye, giving a blue ‘lake’.

Exam Note: Cite adsorption of litmus colour by Al(OH)3.

Question VSA 24. What is saturation pressure in Freundlich’s isotherm?

Solution. The high pressure at which adsorption becomes independent of pressure.

Teacher's Note: At saturation the surface is fully covered; extent stays constant.

Exam Note: Answer: high pressure region.

Question VSA 25. Mention the two conditions for the formation of micelles.

Solution. The concentration must exceed the CMC (critical micelle concentration) and the temperature must exceed the Kraft temperature (Tk).

Teacher's Note: Both CMC and Tk must be exceeded for micelles to form.

Exam Note: Name both conditions.

Question VSA 26. How is Brownian movement responsible for the stability of sols?

Solution. The stirring effect due to Brownian movement does not allow the particles to settle down.

Teacher's Note: Constant random motion opposes gravity and sedimentation.

Exam Note: Link Brownian motion to preventing settling.

Question VSA 27. Which of the following is more effective in coagulating positively charged hydrated ferric oxide sol: (i) KCl, (ii) CaSO4, (iii) K3[Fe(CN)6]?

Solution. (iii) K3[Fe(CN)6].

Teacher's Note: Hardy–Schulze: for a positive sol, the anion of highest charge (3−) is most effective.

Exam Note: Identify the coagulating ion’s charge, not cation.

Question VSA 28. State the purpose of impregnating the filter paper with colloidion solution.

Solution. To reduce the pore size of the filter paper, so that colloidal particles cannot pass through.

Teacher's Note: This makes an ultrafilter that retains colloidal particles.

Exam Note: Mention smaller pores retain colloidal particles.

Question VSA 29. Mention one use of ZSM-5 catalyst.

Solution. In the dehydration of alcohols to form synthetic gasoline.

Teacher's Note: Shape-selective zeolite converting alcohols to hydrocarbons.

Exam Note: One correct use suffices.

Question VSA 30. Name the enzyme which converts starch into maltose.

Solution. Diastase / salivary amylase.

Teacher's Note: Amylase hydrolyses starch to maltose.

Exam Note: Name diastase or amylase.

Question VSA 31. Why is it necessary to remove CO (carbon monoxide) when ammonia is obtained by Haber’s process?

Solution. CO acts as a poison for the catalyst in Haber’s process; therefore it lowers the activity of the Fe catalyst.

Teacher's Note: CO is a catalyst poison, blocking active sites of iron.

Exam Note: Say: CO poisons the Fe catalyst.

Question VSA 32. Explain the terms: (i) CMC, (ii) Kraft temperature (Tk).

Solution. CMC: the concentration above which micelle formation takes place.
Kraft temperature: the temperature above which micelle formation takes place.

Teacher's Note: Micelles form only above both CMC and Tk.

Exam Note: Define each with the word ‘above’.

Short Answer-I Type Questions (2 Marks)

Question SA-I 1. Explain the effect of temperature on the extent of physical and chemical adsorption.

Solution. Physical adsorption decreases with increase of temperature, while chemical adsorption first increases with increase of temperature.

Teacher's Note: Physisorption is exothermic, so it falls with heat; chemisorption needs activation energy.

Exam Note: Contrast the two trends with reasons.

Question SA-I 2. Define the term peptization and mention its cause.

Solution. Peptization is the process of converting a precipitate into a colloidal sol by shaking it with a small amount of electrolyte with dispersion medium. The precipitate adsorbs one of the ions of the electrolyte on its surface.

Teacher's Note: Adsorbed ions give charge, so precipitate breaks into colloidal particles.

Exam Note: Define, then name preferential ion adsorption.

Question SA-I 3. What will be the charge on colloidal solutions in the following cases? (I) AgNO3 solution added to KI solution (KI in beaker). (II) KI solution added to AgNO3 solution (AgNO3 in beaker). Give reasons for the origin of charge. [Figure: two beakers; arrows show the solution added from the top and the solution present in the beaker.]

Solution. Case (I): the solution in the beaker is KI (in excess), so I− ions are adsorbed on AgI, forming a negatively charged colloid. Case (II): AgNO3 is in excess, so Ag+ ions are adsorbed on AgI, forming a positively charged colloid. The reason for the origin of charge is the preferential adsorption of the common ions of the electrolyte present in excess. Corrected: the book lists Ag+/positive as (i) and I−/negative as (ii), which does not match the figure; the answer here follows the figure.

Teacher's Note: The ion in excess (common to AgI) is adsorbed and decides charge.

Exam Note: Identify which reagent is in excess first.

Question SA-I 4. Write the factors upon which the catalytic reaction of shape-selective catalyst depends.

Solution. (a) Pore structure of the catalyst. (b) Size and shape of the reactant and product molecules.

Teacher's Note: Only molecules fitting the pores react or leave.

Exam Note: List both factors: pores, molecular size/shape.

Question SA-I 5. Mention two examples of emulsifying agents for o/w emulsions and w/o emulsions.

Solution. For o/w emulsions: proteins, gums, soaps. For w/o emulsions: fatty acids, long chain alcohols, lampblack.

Teacher's Note: Emulsifier type decides which liquid becomes the continuous phase.

Exam Note: Give two examples for each type.

Question SA-I 6. Suggest a mechanism of enzyme catalysed reaction.

Solution. (a) Binding of enzyme and substrate: E + S → [ES] (fast, reversible). (b) Decomposition of the activated complex to product: [ES] → E + P (slow, rate determining).

Teacher's Note: Enzyme regenerates; the slow second step fixes the rate.

Exam Note: Write both steps; mark the slow step.

Question SA-I 7. A small amount of silica gel and a small amount of anhydrous calcium chloride are placed separately in two beakers containing water vapour. Name the phenomenon that takes place in both the beakers.

Solution. Silica gel: adsorption. Anhydrous CaCl2: absorption, as it forms CaCl2·2H2O.

Teacher's Note: Surface retention versus uptake into bulk with hydrate formation.

Exam Note: Name both: adsorption and absorption.

Question SA-I 8. Write the differences between adsorption and absorption.

Solution. Adsorption is a surface phenomenon, while absorption is a bulk phenomenon.

Teacher's Note: Adsorbate concentrates only on the surface; absorbate spreads uniformly throughout.

Exam Note: Contrast surface versus bulk uniformly.

Question SA-I 9. How can physisorption be distinguished from chemisorption?

Solution. Physisorption arises because of van der Waals forces; it is not specific and is reversible. Chemisorption is caused by chemical bond formation; it is highly specific and irreversible.

Teacher's Note: Compare forces, specificity and reversibility.

Exam Note: Give at least two contrasting points.

Question SA-I 10. Classify the following reactions as homogeneous and heterogeneous catalysis: (a) Vegetable oil (l) + H2 (g) → (Ni(s)) Vegetable ghee (s); (b) C12H22O11 (aq) + H2O (l) → (H2SO4 (aq)) C6H12O6 (aq) + C6H12O6 (aq)

Solution. (a) Heterogeneous catalysis (Ni is solid, reactants are liquid and gas).
(b) Homogeneous catalysis (catalyst and reactants are all in the aqueous phase).

Teacher's Note: Compare the phase of catalyst with that of reactants.

Exam Note: State the phases to justify each.

Question SA-I 11. In what ways are these different: (a) a sol and a gel (b) a gel and an emulsion?

Solution. (a) Sol: dispersed phase solid, dispersion medium liquid. Gel: dispersed phase liquid, dispersion medium solid.
(b) Gel: dispersed phase liquid, dispersion medium solid. Emulsion: dispersed phase liquid, dispersion medium liquid.

Teacher's Note: Differences lie only in the physical states of the two phases.

Exam Note: Write phase of dispersed and medium for each.

Question SA-I 12. State ‘Hardy Schulze Rule’ with one example.

Solution. It states that the greater the valency of the flocculating ion of the electrolyte, the faster is the coagulation. For example, for a negative As2S3 sol, coagulating power follows Al3+ > Ba2+ > Na+.

Teacher's Note: The coagulating ion carries charge opposite to that of the sol.

Exam Note: State rule plus an ordered example.

Question SA-I 13. What is an emulsifying agent? What role does it play in forming an emulsion?

Solution. Emulsifying agents are those agents which stabilise emulsions. An emulsifier acts as a binding agent between the two immiscible liquid phases.

Teacher's Note: Emulsifier forms a protective film around dispersed droplets, stopping them merging.

Exam Note: Define emulsifier and state its stabilising role.

Question SA-I 14. Define the terms: (a) Helmholtz electrical double layer (b) Zeta potential

Solution. (a) The combination of the two layers of opposite charges around the colloidal particle, e.g. AgI/I−K+.
(b) The potential difference between the fixed layer and the diffused layer of opposite charges is called zeta potential.

Teacher's Note: Fixed layer adsorbs one ion type; diffuse layer holds counter-ions.

Exam Note: Define both; AgI/I⁻ K⁺ is the stock example.

Question SA-I 15. A graph between x/m and log p is a straight line at an angle of 45° with intercept on the y-axis i.e., (log k) equal to 0.3010. Calculate the amount of the gas absorbed per gram of the adsorbent under a pressure of 0.5 atmosphere.

Solution. 1/n = tan 45° = 1, log k = 0.3010, so k = 2, p = 0.5 atm.
x/m = kp1/n = 2 × (0.5)1 = 1.0 (gas adsorbed per gram of adsorbent).

Teacher's Note: Slope of log(x/m) vs log p gives 1/n; antilog of intercept gives k.

Exam Note: Find 1/n and k first, then substitute.

Question SA-I 16. Mention the two necessary conditions for the observation of Tyndall effect.

Solution. (a) The size of the dispersed phase particles is not much smaller than the wavelength of light used.
(b) The refractive indices of the dispersed phase and the dispersion medium differ greatly in magnitude.

Teacher's Note: Scattering needs comparable particle size and a refractive index mismatch.

Exam Note: Write both conditions.

Question SA-I 18. Write chemical equations for the preparation of sols: (a) Gold sol by reduction (b) Hydrated ferric oxide sol by hydrolysis.

Solution. (a) 2AuCl3 + 3SnCl2 → 2Au (sol) + 3SnCl4 (reduction)
(b) FeCl3 + 3H2O → Fe(OH)3 (sol) + 3HCl (hydrolysis; Fe(OH)3 may be written Fe2O3·xH2O)

Teacher's Note: Gold sol forms by reducing AuCl3; ferric hydroxide sol by hydrolysis in hot water.

Exam Note: Balanced equations with reaction type named.

Question SA-I 19. How can the two emulsions be distinguished: (a) oil in water type (o/w) and (b) water in oil type (w/o)?

Solution. (a) By dilution test: an o/w emulsion can be diluted with water, but a w/o emulsion cannot.
(b) By dye test.

Teacher's Note: Water-miscible continuous phase accepts water; dye dissolves only in its own phase.

Exam Note: Name dilution test with its outcome.

Question SA-I 20. Leather gets hardened after tanning. Why?

Solution. Animal hide is colloidal in nature and has positively charged particles. When it is soaked in tanning, which has negatively charged colloidal particles, it results in mutual coagulation. This results in the hardening of leather.

Teacher's Note: Oppositely charged colloids coagulate each other.

Exam Note: Mention opposite charges and mutual coagulation.

Question SA-I 21. Why are some medicines more effective in the colloidal form?

Solution. Medicines are more effective in the colloidal form because of large surface area and are easily assimilated in this form.

Teacher's Note: Fine particles expose more surface and are absorbed faster.

Exam Note: Key points: large surface area, easy assimilation.

Question SA-I 22. What happens when dialysis is prolonged?

Solution. When dialysis is prolonged, the traces of electrolyte which stabilise the colloids are removed completely. This makes the colloid unstable and therefore coagulation takes place.

Teacher's Note: A little electrolyte gives the sol its stabilising charge.

Exam Note: Say: stabilising ions removed, so coagulation.

Short Answer-II Type Questions (3 Marks)

Question SA-II 1. Write the difference between: (a) catalysts and enzymes (b) promoters and poisons

Solution. (a) A catalyst is a substance that alters the rate of reaction without consuming itself in the reaction. Enzymes are biocatalysts; they are highly specific compared with catalysts.
(b) Promoters enhance the activity of a catalyst, while poisons decrease the activity of catalysts.

Teacher's Note: Enzymes are biological, highly specific catalysts; promoters and poisons modify catalyst activity.

Exam Note: Give one clear contrast for each pair.

Question SA-II 2. Write the steps of ‘Modern Adsorption Theory of Heterogeneous Catalysis’.

Solution. (a) Diffusion and adsorption of reactant molecules on the surface of the catalyst.
(b) Formation of an intermediate on the surface of the catalyst.
(c) Desorption of the products from the catalyst surface.
(d) Diffusion of the products away from the catalyst surface.

Teacher's Note: Active sites are freed by desorption so reactant molecules can adsorb again.

Exam Note: List the steps in the correct order.

Question SA-II 3. Mention two important features of solid catalysts and explain them with the help of suitable examples.

Solution. The two features are the activity and the selectivity of the catalyst. Example: hydrogenation of unsaturated hydrocarbons in the presence of Raney Ni (or any other example).

Teacher's Note: Activity is the ability to speed up a reaction; selectivity is directing it to one product.

Exam Note: Name both features; give one example.

Question SA-II 4. How are the following colloids different from each other in respect of dispersion medium and dispersed phase? Give one example of each type: (a) An aerosol (b) A hydrosol (c) An emulsion

Solution. (a) Aerosol: dispersed phase solid/liquid; dispersion medium gas; e.g. smoke, dust, fog, cloud.
(b) Hydrosol: dispersed phase solid; dispersion medium water; e.g. muddy water.
(c) Emulsion: dispersed phase liquid; dispersion medium liquid; e.g. milk, hair cream.

Teacher's Note: Aerosol has gas medium, hydrosol water medium, emulsion liquid in liquid.

Exam Note: Write dispersed phase, medium and one example.

Question SA-II 5. What happens: (a) By persistent dialysis of a sol. (b) When river water meets the sea water. (c) When alum is applied on cuts during bleeding.

Solution. (a) Coagulation of the sol takes place.
(b) Delta formation takes place due to coagulation of river water (clay sol).
(c) A clot is formed due to coagulation of blood, which stops further bleeding.

Teacher's Note: Electrolytes (sea salts, alum) neutralise the charge on colloidal particles.

Exam Note: Each part: electrolyte causes coagulation.

Question SA-II 6. Distinguish between multimolecular, macromolecular and associated colloids with the help of one example of each.

Solution. (i) Multimolecular colloids are formed by aggregation of small atoms or molecules. Example: gold sol, sulphur sol.
(ii) Macromolecular colloids are formed by dispersing macromolecules having colloidal size in a proper dispersion medium. Example: protein, starch colloid.
(iii) Associated colloids are formed by aggregation of particles at higher concentration to colloidal range. Example: micelles.

Teacher's Note: Classification depends on how the colloidal-sized particles are built up.

Exam Note: Define each with one example.

Question SA-II 7. (a) Which property of colloids is responsible for the sun to look red at the time of setting? (b) C2H2 on addition with H2 forms ethane in the presence of palladium catalyst, but if the reaction is carried out in the presence of barium sulphate and quinoline, the product is ethene and not ethane. Why? (The book prints ‘ethane and not ethane’, a misprint for ‘ethene and not ethane’.)

Solution. (a) The sun is at the horizon, and the blue part of the light is scattered away by the dust particles as the light has to travel a long distance through the atmosphere.
(b) CH≡CH + H2 → (Pd) CH2=CH2 → (Pd) CH3−CH3; but CH≡CH + H2 → (Pd/BaSO4, quinoline) CH2=CH2. BaSO4 in presence of quinoline acts as a poison; the catalyst is not effective in further reduction.

Teacher's Note: Part (b) shows catalyst poisoning giving selectivity (Lindlar-type) for partial hydrogenation.

Exam Note: Name scattering in (a); catalyst poison in (b).

Long Answer Type Questions (5 Marks)

Question LA 1. Describe some features of catalysis by Zeolites.

Solution. Features of catalysis by zeolites:
(i) Zeolites are hydrated alumino silicates which have a three dimensional network structure containing water molecules in their pores.
(ii) To use them as catalysts, they are heated so that the water of hydration present in the pores is lost and the pores become vacant.
(iii) The size of the pores varies from 260 to 740 pm. Thus, only those molecules can be adsorbed in these pores and catalysed whose size is small enough to enter these pores. Hence, they act as molecular sieves or shape selective catalysts.
An important catalyst used in petroleum industries is ZSM-5. It converts alcohols into petrol by first dehydrating them to form a mixture of hydrocarbons: Alcohols → (ZSM-5, dehydration) Hydrocarbons.

Teacher's Note: Zeolite pores admit only molecules of suitable size, giving shape selectivity.

Exam Note: Cover structure, activation, pore size, ZSM-5.

Question LA 2. Comment on the statement that “colloid is not a substance but state of a substance.”

Solution. The given statement is true. This is because a substance may exist as a colloid under certain conditions and as a crystalloid under other conditions. E.g., NaCl in water behaves as a crystalloid while in benzene it behaves as a colloid (called associated colloid). It is the size of the particles which matters i.e., the state in which the substance exists. If the size of the particles lies in the range 1 nm to 1000 nm it is in the colloid state.

Teacher's Note: Colloid state depends on particle size (1–1000 nm), not on chemical identity.

Exam Note: Cite NaCl in water versus benzene.

Question LA 4. Write short notes on the following: (a) Tyndall Effect (b) Brownian Movement (c) Hardy Schulze Rule

Solution. (a) Tyndall effect: scattering of light by colloidal particles, by which the path of the beam becomes clearly visible.
(b) Brownian movement: zig-zag motion of colloidal particles.
(c) Hardy Schulze rule: the coagulating value of a coagulating ion is directly proportional to the charge on the ion. E.g., Na+ < Ca2+ < Al3+ for a negatively charged sol; Cl− < CO32− < PO43− < [Fe(CN)6]4− for a positively charged sol. Corrected: the book says coagulating value is directly proportional to the charge; in fact the coagulating power (effectiveness) rises with charge, while the coagulation value (minimum amount needed) falls. The orders given above are in increasing coagulating power.

Teacher's Note: Higher charge on the opposite-sign ion means more effective coagulation (lower flocculation value).

Exam Note: Write rule with both ordered series.

Matching Type

Question MT 1. Method of formation of solution is given in Column I. Match it with the type of solution given in Column II. (i) Sulphur vapours passed through cold water (ii) Soap mixed with water above critical micelle concentration (iii) White of egg whipped with water (iv) Soap mixed with water below critical micelle concentration; (a) Normal electrolyte solution (b) Molecular colloids (c) Associated colloid (d) Macro molecular colloids

Solution. (i) – (b); (ii) – (c); (iii) – (d); (iv) – (a)

Teacher's Note: Below CMC soap is a normal electrolyte; above it forms associated micelles.

Exam Note: Check CMC for soap items.

Question MT 2. Match the statement given in Column I with the phenomenon given in Column II. (i) Dispersion medium moves in an electric field (ii) Solvent molecules pass through semi permeable membrane towards solvent side (iii) Movement of charged colloidal particles under the influence of applied electric potential towards oppositely charged electrodes (iv) Solvent molecules pass through semi permeable membranes towards solution side; (a) Osmosis (b) Electrophoresis (c) Electro osmosis (d) Reverse osmosis

Solution. (i) – (c); (ii) – (d); (iii) – (b); (iv) – (a)

Teacher's Note: Osmosis moves solvent to solution side; reverse osmosis opposite; electro-osmosis moves medium.

Exam Note: Direction of solvent flow decides the pair.

Question MT 3. Match the items given in Column I and Column II. (i) Protective colloid (ii) Liquid-liquid colloid (iii) Positively charged colloid (iv) Negatively charged colloid; (a) FeCl3 + NaOH (b) Lyophilic colloids (c) Emulsion (d) FeCl3 + hot water

Solution. (i) – (b); (ii) – (c); (iii) – (d); (iv) – (a)

Teacher's Note: FeCl3 in hot water gives positive Fe(OH)3 sol; with NaOH, negative.

Exam Note: Fe(OH)3 sol is positive; NaOH route gives negative.

Question MT 4. Match the types of colloidal systems given in Column I with the name given in Column II. (i) Solid in liquid (ii) Liquid in solid (iii) Liquid in liquid (iv) Gas in liquid; (a) Foam (b) Sol (c) Gel (d) Emulsion

Solution. (i) – (b); (ii) – (c); (iii) – (d); (iv) – (a)

Teacher's Note: Name colloids by dispersed phase/medium: sol, gel, emulsion, foam.

Exam Note: Learn the phase-pair names.

Question MT 5. Match the items of Column I and Column II. (i) Dialysis (ii) Peptisation (iii) Emulsification (iv) Electrophoresis; (a) Cleansing action of soap (b) Coagulation (c) Colloidal sol formation (d) Purification

Solution. (i) – (d); (ii) – (c); (iii) – (a); (iv) – (b)

Teacher's Note: Electrophoresis of sol particles to the electrode leads to coagulation.

Exam Note: Dialysis purifies; peptisation makes sols.

Question MT 6. Match the items of Column I and Column II. (i) Butter (ii) Pumice stone (iii) Milk (iv) Paints; (a) Dispersion of liquid in liquid (b) Dispersion of solid in liquid (c) Dispersion of gas in solid (d) Dispersion of liquid in solid

Solution. (i) – (d); (ii) – (c); (iii) – (a); (iv) – (b)

Teacher's Note: Butter is a gel; pumice a solid foam; milk an emulsion; paint a sol.

Exam Note: Identify dispersed phase and medium.

Step-by-Step Pradeep's KL Gogia Solutions for Class 12 Math

Complete Math Solutions for Pradeep's KL Gogia Solutions Class 12 Chemistry Chapter 5 Surface Chemistry

Access the complete chapter-wise PDF for Pradeep's KL Gogia Solutions Class 12 Chemistry Chapter 5 Surface Chemistry. These structured Pradeep's KL Gogia Solutions solutions for Class 12 Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.

Detailed Calculation Guides for Class 12

Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.

Complete Your Class 12 Exam Preparation

Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.

FAQs

What are these Pradeep's KL Gogia Solutions for Class 12 Chemistry?

They are chapter-wise solved questions from the Pradeep&#039;s KL Gogia book for Class 12 Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the Pradeep's KL Gogia Class 12 Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these Pradeep's KL Gogia solutions for Class 12 Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising Pradeep's KL Gogia Class 12 Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 12 Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.