Download Class 12 Chemistry Textbook Solutions: Chapter 06 General Principles And Processes Of Isolation Of E
Explore reliable textbook solutions for Chapter 06 General Principles And Processes Of Isolation Of E tailored for Class 12 learners using methodologies. Utilizing these Chemistry answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.
Access Textbook Answers and Solutions
View or download the dedicated Chapter 06 General Principles And Processes Of Isolation Of E solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Chemistry.
Short Answer Questions II
Question 1. Name the chief ore of silver. Describe with chemical equations the extraction of silver from this ore.
Solution.
The chief ore of silver is argentite or silver glance (Ag2S).
The extraction of silver from argentite: Argentite ore is treated with dilute solution of NaCN in presence of oxygen to oxidise sodium sulphide to sodium sulphate to form a soluble complex.
Ag2S + 4NaCN 2Na [Ag → (CN)2] + Na2S
Zn acts as reducing agent and displaces silver from the complex.
2Na[Ag(CN)2] + Zn → Na2[Zn(CN)4] + 2Ag ↓
The crude Ag metal thus obtained is refined by fusion with borax or by electrolysis.
Teacher's Note: Argentite is the chief ore of silver, extracted by cyanide leaching and then displacement with zinc.
Exam Note: Name argentite, write cyanide leaching equations and displacement with zinc.
Question 2. State briefly the principles involved in the following operations in metallurgy. Give an example. [CBSE Sample Paper 2015]
Hydraulic washing
Solution.
Hydraulic washing is based on the differences in the gravities of the ore and gangue particles. Cassiterite (SnO2), native gold and galena (PbS) are concentrated by this method.
Q. Zone refining
Ans. This method of refining of metals is based on the principle that the impurities are more soluble in molten state than in the solid state of the metal. Germanium, silicon, boron, gallium and indium are refined by this method.
Teacher's Note: Metallurgical operations use physical or chemical differences between ore and impurity.
Exam Note: Give principle and example for each operation, such as gravity-based washing.
Question 3. Account for the following facts: [CBSE Sample Paper 2016]
The reduction of a metal oxide is easier if the metal formed is in the liquid state at the temperature of reduction.
Solution.
The entropy is higher if the metal is in liquid state than when it is in solid state. The value of entropy change (ΔS) of the reduction process is more on +ve side when the metal formed is in liquid state and the metal oxide being reduced in solid state. Since the value of TΔS increases and that of ΔH remains constant, therefore, the value of Δr G° (ΔG = ΔH – TΔS) becomes more –ve and hence the reduction becomes easier.
Q. Limestone is used in the manufacture of pig iron from haematite.
Ans. Limestone provides the flux, CaO which combines with impurity, SiO2 to form easily fusible CaSiO3 slag. Thus, it helps in the removal of impurity silica, SiO2.
Q. Pine oil is used in the froth floatation process used to concentrate sulphide ores
Ans. Pine oil (collector) enhances the non-wettability of the ore particles, which become lighter and hence rise to the surface along with the froth.
Teacher's Note: A liquid metal product gains entropy, which makes the reduction of its oxide thermodynamically easier.
Exam Note: Link liquid state to higher entropy change.
Question 4. Answer the following questions
Write the principle of method used for the refining of germanium.
Solution.
The impurities are more soluble in the melt than in the solid state of the metal. Q. Out of PbS and PbCO3 (ores of lead), which one is concentrated by froth floatation process preferably?
Ans. PbS.
Q. What is the significance of leaching in the extraction of aluminium?
Ans. Leaching is significant as it helps in removing impurities like SiO2, Fe2O3 and TiO2, etc. from the powdered bauxite ore by heating it with concentrated solution of NaOH.
Teacher's Note: Germanium is refined by zone refining, where impurities dissolve better in the molten zone than in the solid.
Exam Note: Name zone refining and its principle.
Question 5. Answer the following questions [CBSE (AI) 2017] (i) Write the principle of vapour phase refining. (ii) Write the role of dilute NaCN in the extraction of silver. (iii) What is the role of collectors in the froth floatation process? Give an example of a collector.
Solution.
(i) Vapour phase refining: In this method, the metal is converted into its volatile compound and collected elsewhere. It is then thermally decomposed to get the pure metal. Following examples will illustrate this technique:
Mond process: Nickel is heated in a stream of carbon monoxide to form a volatile complex, nickel tetracarbonyl. The vapour of nickel carbonyl is taken to a decomposer chamber maintained at 450–470 K where it decomposes to give pure nickel.
van Arkel method: This method is very useful for removing all the oxygen and nitrogen present in the form of impurity in certain metals like Zr and Ti. Impure metal is heated with iodine in an evacuated vessel and the resultant tetraiodide is decomposed on a tungsten filament to get the pure metal.
(ii) Dilute NaCN leaches the silver ore in the presence of air, converting silver into the soluble complex Na[Ag(CN)2], from which silver is later displaced by zinc.
Ag2S + 4NaCN → 2Na[Ag(CN)2] + Na2S
(iii) Collectors enhance non-wettability of the ore particles in the froth floatation process, e.g., pine oils, fatty acids, xanthates, etc.
Teacher's Note: Vapour phase refining needs a volatile compound that decomposes easily; NaCN forms a soluble silver complex.
Exam Note: Volatile compound, then decompose; cyanide complex; collectors aid froth.
Question 6. Answer the following questions [CBSE (AI) 2017] (i) Write the principle of electrolytic refining. (ii) What is the reason for the blistered appearance of blister copper? (iii) What is the role of depressants in the froth floatation process?
Solution.
(i) On passing electric current, the metal ions from the electrolytic solution are deposited at the cathode in the form of pure metal while an equivalent amount of metal dissolves from the anode and goes into the electrolytic solution as metal ions, i.e.,
At cathode: Mn+(aq) + ne− → M(s)
At anode: M(s) → Mn+(aq) + ne−
(ii) The blistered appearance is due to evolution of SO2 gas.
2Cu2S + 3O2 → 2Cu2O + 2SO2
2Cu2O + Cu2S → 6Cu + SO2
(iii) Depressant selectively prevents one of the sulphide ore from coming to the froth, e.g., NaCN in the concentration of PbS. It selectively prevents ZnS from coming to the froth by forming complex Na2[Zn(CN)4] but allows PbS to come with the froth.
Teacher's Note: Pure metal deposits at the cathode; escaping SO2 leaves blisters on solidified copper.
Exam Note: Cathode deposit; SO2 blisters; depressant blocks one sulphide.
Question 7. Describe how the following changes are brought about: [CBSE Delhi 2010; (AI) 2010] (i) Pig iron into steel. (ii) Zinc oxide into metallic zinc. (iii) Impure titanium into pure titanium.
Solution.
(i) Pig iron is converted into steel by heating in a converter. A blast of oxygen diluted with carbon dioxide is blown through the converter. Oxygen reacts with impurities and raises the temperature to 2173 K. Carbon gets oxidised to CO which burns off at the mouth of the converter. Oxides of silicon and manganese form slag. When the flame is stopped, slag is tapped off and other metals like Mn, Cr, Ni, W may be added in the end.
(ii) The reduction of zinc oxide is done using coke, as a reducing agent. For the purpose of heating, the oxide is made into briquettes with coke and clay.
ZnO + C → Zn + CO (coke, 1673 K)
The metal is distilled off and collected by rapid chilling.
(iii) Impure titanium is heated with iodine to form volatile TiI4, which decomposes on tungsten filament at high temperature to give pure titanium.
Ti(s) + 2I2(g) → TiI4(g) (523 K); TiI4(g) → Ti(s) + 2I2(g) (1700 K)
Teacher's Note: Impurities in pig iron are oxidised; zinc is reduced by carbon and distilled; titanium is refined by van Arkel method.
Exam Note: Converter oxidation; coke reduction; iodide decomposition.
Question 8. Describe the role of [CBSE (F) 2014] (i) Iodine in the refining of zirconium. (ii) NaCN in the extraction of gold from gold ore. (iii) Graphite rod in the electrometallurgy of aluminium. Write chemical equations for the involved reactions.
Solution.
(i) Impure zirconium is heated with iodine to form volatile compound ZrI4 which on further heating over tungsten filament decomposes to give pure zirconium.
Zr + 2I2 → ZrI4 (870 K); ZrI4 → Zr + 2I2 (2075 K)
(ii) Gold ore is leached with dilute solution of NaCN in the presence of air from which the metal is obtained later by displacement.
4Au + 8NaCN + O2 + 2H2O → 4Na[Au(CN)2] + 4NaOH
(iii) Graphite rod acts as anode and steel vessel lined with carbon acts as cathode in the electrometallurgy of aluminium. Carbon reacts with oxygen liberated at anode producing CO and CO2, otherwise oxygen liberated at the anode may oxidise some of the liberated aluminium back to Al2O3.
At anode: C(s) + O2−(melt) → CO(g) + 2e−; C(s) + 2O2−(melt) → CO2(g) + 4e−
At cathode: Al3+(melt) + 3e− → Al(l)
Teacher's Note: Iodine forms volatile ZrI4; cyanide forms a soluble gold complex; graphite serves as the electrodes.
Exam Note: Give role and equation for each part.
Question 9. Write the reactions involved in the following processes: [CBSE (F) 2011] (i) Leaching of bauxite ore to prepare pure alumina. (ii) Refining of zirconium by van Arkel method. (iii) Recovery of gold after gold ore has been leached with NaCN solution.
Solution.
(i) Leaching of bauxite ore to prepare pure alumina:
Al2O3(s) + 2NaOH(aq) + 3H2O(l) → 2Na[Al(OH)4](aq)
2Na[Al(OH)4](aq) + CO2(g) → Al2O3·xH2O(s) + 2NaHCO3(aq)
Al2O3·xH2O(s) → Al2O3(s) + xH2O(g) (1470 K)
(ii) Refining of zirconium by van Arkel method:
Zr(s) + 2I2(g) → ZrI4(g) (870 K)
ZrI4(g) → Zr(s) + 2I2(g) (2075 K, tungsten filament)
(iii) Extraction of gold:
4Au(s) + 8CN−(aq) + 2H2O(l) + O2(g) → 4[Au(CN)2]−(aq) + 4OH−(aq)
Gold is recovered from the [Au(CN)2]− complex by displacement method using a more electropositive metal, zinc.
2[Au(CN)2]−(aq) + Zn(s) → 2Au(s) + [Zn(CN)4]2−(aq)
Teacher's Note: Bauxite is leached with NaOH; zirconium forms a volatile iodide; gold is displaced from its complex by zinc.
Exam Note: Write all three reaction sets with conditions.
Question 10. Answer the following questions [CBSE Sample Paper 2013] (i) Give one example of each of the following: (a) Acidic flux (b) Basic flux. (ii) What happens when: (a) Cu2O undergoes self reduction in a silica lined converter. (b) Haematite oxidises carbon to carbon monoxide.
Solution.
(i) Acidic flux: SiO2; Basic flux: CaO
(ii) (a) Cu2O undergoes self reduction to form blister copper:
2Cu2O + Cu2S → 6Cu + SO2
(b) Haematite oxidises carbon to carbon monoxide:
Fe2O3 + 3C → 2Fe + 3CO
Teacher's Note: Fluxes remove gangue as slag; copper(I) oxide reacts with copper sulphide to give copper.
Exam Note: Acidic SiO2, basic CaO; write both equations.
Question 11. How is the concept of coupling reactions useful in explaining the occurrence of non-spontaneous thermochemical reactions? Explain by giving an example.
Solution.
Many reactions which are non-spontaneous (ΔG is +ve) can be made to occur spontaneously if these are coupled with reactions having larger negative free energy. By coupling means carrying out simultaneously both non-spontaneous and spontaneous reactions. For example, decomposition of Fe2O3 into iron is a non-spontaneous reaction (ΔG° = +1487 kJ mol−1). However, this decomposition can take place spontaneously if carbon monoxide is simultaneously burnt in oxygen (ΔG = −514.4 kJ mol−1).
2Fe2O3(s) → 4Fe(s) + 3O2(g); ΔG° = +1487.0 kJ mol−1 ...(i)
2CO(g) + O2(g) → 2CO2(g); ΔG° = −514.4 kJ mol−1 ...(ii)
Multiplying equation (ii) by 3 and then adding to equation (i), we get
2Fe2O3(s) + 6CO(g) → 4Fe(s) + 6CO2(g); ΔG° = −56.2 kJ mol−1
Since ΔG° in the reduction of Fe2O3 with CO is −ve, therefore, the reaction is feasible and spontaneous.
Teacher's Note: A reaction with positive free energy change proceeds if coupled with one that has a larger negative value.
Exam Note: Add free energies; net negative means feasible.
Question 12. Free energies of formation (ΔfG) of MgO(s) and CO(g) at 1273 K and 2273 K are given below. ΔfG[MgO(s)] = −941 kJ/mol at 1273 K; ΔfG[MgO(s)] = −314 kJ/mol at 2273 K; ΔfG[CO(g)] = −439 kJ/mol at 1273 K; ΔfG[CO(g)] = −628 kJ/mol at 2273 K. On the basis of above data, predict the temperature at which carbon can be used as a reducing agent for MgO(s).
Solution.
At 1273 K:
Mg(s) + ½O2(g) → MgO(s); ΔfG = −941 kJ/mol ...(i)
C(s) + ½O2(g) → CO(g); ΔfG = −439 kJ/mol ...(ii)
Subtracting equation (i) from equation (ii), we get
MgO(s) + C(s) → Mg(s) + CO(g); ΔrG = +502 kJ/mol
As ΔrG for the above reduction reaction is positive, therefore, reduction of MgO by C is not feasible at 1273 K.
At 2273 K:
Mg(s) + ½O2(g) → MgO(s); ΔfG = −314 kJ/mol ...(iii)
C(s) + ½O2(g) → CO(g); ΔfG = −628 kJ/mol ...(iv)
Subtracting equation (iii) from equation (iv), we get
MgO(s) + C(s) → Mg(s) + CO(g); ΔrG = −314 kJ/mol
As ΔrG for the above reduction reaction is −ve, therefore, reduction of MgO by carbon at 2273 K is feasible and hence, carbon can be used as a reducing agent at 2273 K.
Teacher's Note: Reduction is feasible when the net free energy change turns negative, which happens at the higher temperature.
Exam Note: Net ΔG negative only at 2273 K.
Question 13. What chemical principle is involved in choosing a reducing agent for getting the metal from its oxide ore? Consider the metal oxides, Al2O3 and FeO and justify the choice of reducing agent in each case. [CBSE Sample Paper 2016]
Solution.
The Ellingham diagram (plot of ΔfG° against temperature for oxide formation) provides a basis for considering the choice of reducing agent in the reduction of oxides. Metals for which the standard free energy of formation (ΔfG°) is more negative can reduce those metals for which ΔfG° is less negative. At a given temperature, any metal will reduce the oxide of other metals which lie above it in the Ellingham diagram.
- Al2O3: below the temperature 1623 K (approx.) corresponding to the point of intersection of the Al2O3 and MgO curves, Mg can reduce alumina. Carbon cannot reduce Al2O3 at practical temperatures, so aluminium is obtained by electrolytic reduction.
- FeO: at temperatures below 1073 K, the CO, CO2 line lies below the Fe, FeO line, thus CO is a better reducing agent.
- At temperatures above 1073 K (approx.), the C, CO line lies below the Fe, FeO line. So, coke will reduce FeO and itself get oxidised to CO.
Teacher's Note: The metal or reductant whose oxide has the more negative free energy of formation reduces the other oxide.
Exam Note: Use Ellingham diagram; carbon for FeO, electrolysis for Al2O3.
Free study material for Chemistry
Step-by-Step Xam Idea Solutions for Class 12 Math
Complete Math Solutions for Xam Idea Solutions Class 12 Chemistry Chapter 6 General Principles And Processes Of Isolation Of E Short Answer Questions II
Review detailed solutions for Class 12 Mathematics. The Xam Idea Solutions Class 12 Chemistry Chapter 6 General Principles And Processes Of Isolation Of E Short Answer Questions II PDF provides comprehensive answers mapped to standard Xam Idea Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.
Concept-Driven Math Answers
Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.
Explore More Study Resources for Class 12 Math
In addition to these Xam Idea Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.
FAQs
They are chapter-wise solved questions from the book for Class 12 Chemistry. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.