Solutions for Class 12 Chemistry: Chapter 03 Electrochemistry
Review structured textbook solutions for Class 12 Chemistry Chapter 03 Electrochemistry prepared by . Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.
Practice Class 12 Chemistry Solutions: Chapter 03 Electrochemistry
Navigate directly to the solved Chemistry textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.
Short Answer Questions II
Question 1. The cell in which the following reaction occurs: 2Fe3+(aq) + 2I−(aq) → 2Fe2+(aq) + I2(s) has E°cell = 0.236 V at 298 K. Calculate the standard Gibbs energy of the cell reaction. (Given: 1 F = 96,500 C mol−1)
Solution.
n = 2, E°cell = 0.236 V, F = 96,500 C mol−1
ΔG° = −nFE°cell = −2 × 96500 C mol−1 × 0.236 V = −45548 J mol−1 = −45.548 kJ mol−1
Teacher's Note: Two electrons are transferred; delta G follows from −nFE°.
Exam Note: Use ΔG° = −nFE°.
Question 2. How many electrons flow through a metallic wire if a current of 0.5 A is passed for 2 hours? (Given: 1 F = 96,500 C mol−1)
Solution.
Q = I × t = 0.5 A × 2 × 60 × 60 s = 3600 C
Number of electrons flowing on passing a charge of 96500 C = 6.022 × 1023
∴ Number of electrons for 3600 C = (6.022 × 1023 × 3600)/96500 = 2.246 × 1022
Teacher's Note: Charge is current times time; one faraday carries Avogadro's number of electrons.
Exam Note: Q = It, then scale from 96500 C.
Question 3. State two advantages of H2–O2 fuel cell over ordinary cell.
Solution.
The two main advantages of H2–O2 fuel cell over ordinary cell are:
i. It has high efficiency of 60%–70%.
ii. It does not cause any pollution.
Teacher's Note: Fuel cells convert fuel energy directly to electricity efficiently, producing only water.
Exam Note: High efficiency; pollution free.
Question 4. Conductivity of 2.5 × 10−4 M methanoic acid is 5.25 × 10−5 S cm−1. Calculate its molar conductivity and degree of dissociation. Given: λ°(H+) = 349.5 S cm2 mol−1 and λ°(HCOO−) = 50.5 S cm2 mol−1.
Solution.
Λm = κ × 1000/c = (5.25 × 10−5 × 1000)/(2.5 × 10−4) = 210 S cm2 mol−1
Λ°m(HCOOH) = 349.5 + 50.5 = 400 S cm2 mol−1
α = Λm/Λ°m = 210/400 = 0.525
Teacher's Note: Molar conductivity comes from conductivity; degree of dissociation compares it with the Kohlrausch sum.
Exam Note: Find Λm, Λ°m, then α.
Question 5. Name the type of cell which was used in Apollo space programme for providing electrical power.
Solution.
H2–O2 fuel cell.
Teacher's Note: The hydrogen-oxygen fuel cell supplied power and drinking water.
Exam Note: Fuel cell.
Question 6. Conductivity of 0.00241 M acetic acid solution is 7.896 × 10−5 S cm−1. Calculate its molar conductivity in this solution. If Λ°m for acetic acid is 390.5 S cm2 mol−1, what would be its dissociation constant?
Solution.
Λm = κ × 1000/c = (7.896 × 10−5 × 1000)/0.00241 = 32.76 S cm2 mol−1
α = Λm/Λ°m = 32.76/390.5 = 0.084
CH3COOH ⇌ CH3COO− + H+
Ka = cα2/(1 − α) = (0.00241 × (0.084)2)/(1 − 0.084) = 1.86 × 10−5
Teacher's Note: Degree of dissociation from molar conductivities; then Ka = c alpha squared over (1 minus alpha).
Exam Note: Find α first, then Ka.
Question 7. Calculate ΔrG° and log Kc for the following reaction at 298 K: 2Cr(s) + 3Fe2+(aq) → 2Cr3+(aq) + 3Fe(s). Given: E°cell = 0.30 V
Solution.
n = 6
ΔrG° = −nFE°cell = −6 × 96500 × 0.30 = −173700 J mol−1 = −173.7 kJ mol−1
log Kc = nE°/0.059 = (6 × 0.30)/0.059 = 30.5
Teacher's Note: Six electrons are exchanged; delta G is negative and K is very large.
Exam Note: Use n = 6 in both formulas.
Question 8. One half-cell in a voltaic cell is constructed from a silver wire dipped in silver nitrate solution of unknown concentration. The other half-cell consists of a zinc electrode in a 0.10 M solution of Zn(NO3)2. A voltage of 1.48 V is measured for this cell. Use this information to calculate the concentration of silver ions in the solution. (E°(Ag+/Ag) = +0.80 V, E°(Zn2+/Zn) = −0.76 V)
Solution.
Zn + 2Ag+ → Zn2+ + 2Ag; n = 2
E°cell = 0.80 − (−0.76) = 1.56 V
Ecell = E°cell − (0.059/2) log ([Zn2+]/[Ag+]2)
1.48 = 1.56 − 0.0295 log (0.10/[Ag+]2) ⇒ log (0.10/[Ag+]2) = 2.71
0.10/[Ag+]2 = 5.1 × 102 ⇒ [Ag+]2 = 1.96 × 10−4
[Ag+] = 1.4 × 10−2 M
Teacher's Note: Apply the Nernst equation to the measured voltage and solve for silver ion concentration.
Exam Note: Find E°cell, then solve the Nernst equation.
Question 9. A strip of nickel metal is placed in a 1-molar solution of Ni(NO3)2 and a strip of silver metal is placed in a 1-molar solution of AgNO3. An electrochemical cell is created when the two solutions are connected by a salt bridge and the two strips are connected by wires to a voltmeter. (i) Write the balanced equation for the overall reaction occurring in the cell and calculate the cell potential. (ii) Calculate the cell potential, E, at 25°C for the cell if the initial concentration of Ni(NO3)2 is 0.100 molar and the initial concentration of AgNO3 is 1.00 molar. (E°(Ni2+/Ni) = −0.25 V, E°(Ag+/Ag) = +0.80 V)
Solution.
(i) Ni(s) + 2Ag+(aq) → Ni2+(aq) + 2Ag(s); E°cell = 0.80 − (−0.25) = 1.05 V
(ii) Ecell = E°cell − (0.059/2) log ([Ni2+]/[Ag+]2) = 1.05 − 0.0295 log (0.100/1.002) = 1.05 + 0.0295 = 1.08 V
Teacher's Note: Overall potential is 1.05 V at unit concentration; lower nickel ion concentration raises it slightly.
Exam Note: Write the reaction; apply Nernst for (ii).
Question 10. The electrical resistance of a column of 0.05 M NaOH solution of diameter 1 cm and length 50 cm is 5.55 × 103 ohm. Calculate its resistivity, conductivity and molar conductivity.
Solution.
Area of cross-section A = πr2 = 3.14 × (0.5 cm)2 = 0.785 cm2
Resistivity ρ = RA/l = (5.55 × 103 × 0.785)/50 = 87.2 Ω cm
Conductivity κ = 1/ρ = 1/87.2 = 0.0115 S cm−1
Λm = κ × 1000/c = (0.0115 × 1000)/0.05 = 229 S cm2 mol−1
Teacher's Note: Resistivity is resistance times area over length; conductivity is its reciprocal.
Exam Note: Find ρ, κ, then Λm.
Question 11. A voltaic cell is set up at 25°C with the following half cells: Al/Al3+ (0.001 M) and Ni/Ni2+ (0.50 M). Write an equation for the reaction that occurs when the cell generates an electric current and determine the cell potential. (E°(Ni2+/Ni) = −0.25 V, E°(Al3+/Al) = −1.66 V)
Solution.
2Al(s) + 3Ni2+(aq) → 2Al3+(aq) + 3Ni(s); n = 6
E°cell = −0.25 − (−1.66) = 1.41 V
Ecell = 1.41 − (0.059/6) log ([Al3+]2/[Ni2+]3) = 1.41 − 0.00983 log ((0.001)2/(0.50)3) = 1.41 − 0.00983 × (−5.10) = 1.41 + 0.050 = 1.46 V
Teacher's Note: Aluminium is oxidised and nickel ions reduced; Nernst gives about 1.46 V.
Exam Note: Balance with n = 6, then use Nernst.
Question 12. Chromium metal can be plated out from an acidic solution containing CrO3 according to the following equation: CrO3(aq) + 6H+(aq) + 6e− → Cr(s) + 3H2O. Calculate (i) how many grams of chromium will be plated out by 24,000 coulombs and (ii) how long will it take to plate out 1.5 g of chromium by using 12.5 A current? (At. mass of Cr = 52)
Solution.
6 × 96500 C = 579000 C deposit 52 g of Cr.
(i) Mass by 24000 C = (52 × 24000)/579000 = 2.16 g
(ii) Charge needed for 1.5 g = (579000 × 1.5)/52 = 16702 C; t = Q/I = 16702/12.5 = 1336 s (about 22.3 min)
Teacher's Note: Six faradays plate one mole of chromium; time is charge divided by current.
Exam Note: Use 6F per mole of Cr.
Question 13. (a) A current of 1.50 A was passed through an electrolytic cell containing AgNO3 solution with inert electrodes. The weight of Ag deposited was 1.50 g. How long did the current flow? (b) Write the reactions taking place at the anode and cathode in the above cell. (c) Give reactions taking place at the two electrodes if these are made up of Ag.
Solution.
(a) Ag+ + e− → Ag: 96500 C deposit 108 g. Charge for 1.50 g = (96500 × 1.50)/108 = 1340 C; t = Q/I = 1340/1.50 = 893.5 s (about 14.9 min)
(b) Inert electrodes: Cathode: Ag+(aq) + e− → Ag(s); Anode: 2H2O(l) → O2(g) + 4H+(aq) + 4e−
(c) Silver electrodes: Cathode: Ag+(aq) + e− → Ag(s); Anode: Ag(s) → Ag+(aq) + e−
Teacher's Note: With inert electrodes oxygen forms at the anode; with silver electrodes the anode dissolves.
Exam Note: Time = charge / current; give both electrode sets.
Question 14. A zinc rod is dipped in 0.1 M solution of ZnSO4. The salt is 95% dissociated at this dilution at 298 K. Calculate the electrode potential. (E°(Zn2+/Zn) = −0.76 V)
Solution.
E(Zn2+/Zn) = E° − (0.0591/2) log (1/[Zn2+])
As the salt is 95% dissociated, [Zn2+] = (95/100) × 0.1 M = 0.095 M
E = −0.76 − 0.02955 log (1/0.095) = −0.76 − 0.02955 × 1.022 = −0.76 − 0.0302 = −0.79 V
Teacher's Note: Use the actual zinc ion concentration (0.095 M) in the Nernst equation.
Exam Note: Ion concentration = 0.095 M.
Question 15. The conductivity of 0.001028 mol L−1 acetic acid is 4.95 × 10−5 S cm−1. Calculate its dissociation constant if Λ°m for acetic acid is 390.5 S cm2 mol−1.
Solution.
Λm = κ × 1000/c = (4.95 × 10−5 × 1000)/0.001028 = 48.15 S cm2 mol−1
α = Λm/Λ°m = 48.15/390.5 = 0.1233
K = cα2/(1 − α) = (0.001028 × (0.1233)2)/(1 − 0.1233) = 1.78 × 10−5 mol L−1
Teacher's Note: Find alpha from molar conductivities, then apply Ostwald dilution law.
Exam Note: K = cα² / (1 − α).
Question 16. Estimate the minimum potential difference needed to reduce Al2O3 at 500°C. The free energy change for the decomposition reaction ⅔Al2O3 → ⅔Al + O2 is 960 kJ. (F = 96,500 C mol−1)
Solution.
Al2O3 (2Al3+ + 3O2−) → 2Al + (3/2)O2, n = 6e−
∴ (2/3)Al2O3 → (4/3)Al + O2, n = (2/3) × 6e− = 4e−
ΔG = −nFE° ⇒ E° = −ΔG/(nF) = −(960 × 1000)/(4 × 96500) = −2.49 V
Thus the minimum potential difference needed is about 2.5 V.
Teacher's Note: The minimum applied potential equals the magnitude of delta G divided by nF.
Exam Note: Four electrons; E = 960000/(4 × 96500).
Free study material for Chemistry
Xam Idea Solutions for Class 12 Mathematics: Xam Idea Solutions Class 12 Chemistry Chapter 3 Electrochemistry Short Answer Questions II
Download Xam Idea Solutions for Class 12
Explore reliable mathematical solutions for Xam Idea Solutions Class 12 Chemistry Chapter 3 Electrochemistry Short Answer Questions II tailored for Class 12 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.
Detailed Calculation Guides for Class 12
Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.
Next Steps in Your Mathematics Revision
In addition to these Xam Idea Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.
FAQs
They are chapter-wise solved questions from the book for Class 12 Chemistry. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.