Xam Idea Solutions Class 12 Chemistry Chapter 3 Electrochemistry Short Answer Questions I

Download Class 12 Chemistry Textbook Solutions: Chapter 03 Electrochemistry

Review structured textbook solutions for Class 12 Chemistry Chapter 03 Electrochemistry prepared by . Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.

Access Textbook Answers and Solutions

Navigate directly to the solved Chemistry textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.

Short Answer Questions I

Question 1. Write electrode reactions taking place in i. Ni–Cd cell, ii. Lead Acid Accumulator.

Solution.

Cd(s) + 2OH–(aq) → Cd(OH)2(s) + 2e– i. NiO2(s) + 2H2O + 2e– → Ni(OH)2(s) + 2OH–(aq) Pb → Pb2+ + 2e– (at anode)PbO2 + ii. SO42– + 4H+ + 2e– → PbSO4 + 2H2O (at cathode)

Teacher's Note: Electrode reactions of these cells show oxidation at the anode and reduction at the cathode.

Exam Note: Write anode and cathode reactions.

Question 2. Account for the following: i. Alkaline medium inhibits the rusting of iron. ii. Iron does not rust even if the zinc coating is broken in a galvanized iron pipe.

Solution.

(i) The alkalinity of the solution prevents the availability of H+ ions.

(ii) Zinc has lower reduction potential than iron. Therefore, zinc coating acts as anode and the exposed iron portions act as cathode. If zinc coating is broken, zinc still undergoes oxidation, protecting iron from rusting. No attack occurs on iron till all the zinc is corroded.

Teacher's Note: Alkaline medium reduces hydrogen ions, and zinc coating protects iron by sacrificial action.

Exam Note: Explain each part.

Question 3. The following curve is obtained when molar conductivity (Λm) is plotted against the square root of concentration, c1/2 for two electrolytes A and B. (i) How do you account for the increase in the molar conductivity of the electrolyte A on dilution? (ii) As seen from the graph, the value of limiting molar conductivity (Λ°m) for electrolyte B cannot be obtained graphically. How can this value be obtained?

Solution.

Λm (S cm² mol⁻¹)c1/2 (mol/L)1/2AB

(i) As seen from the graph, electrolyte ‘A’ is a strong electrolyte which is ionised almost completely in solutions. For strong electrolyte ‘A’, the number of ions does not increase appreciably on dilution and only mobility of ions increases due to decrease in interionic attraction. Therefore, molar conductivity increases a little as shown in the graph by a straight line.

(ii) Limiting molar conductivity (Λ°m) for weak electrolyte ‘B’ can be obtained by using Kohlrausch law of independent migration of ions, which says that limiting molar conductivity of an electrolyte is equal to the sum of the individual contribution of the cation and anion of the electrolyte.

Teacher's Note: A strong electrolyte gives a straight line; a weak one needs Kohlrausch's law for its limiting value.

Exam Note: Link A to mobility, B to Kohlrausch law.

Question 4. (a) For a weak electrolyte, molar conductance in dilute solution increases sharply as its concentration in solution is decreased. Give reason. (b) Write overall cell reaction for lead storage battery when the battery is being charged.

Solution.

(a) Because with dilution, there is increase in degree of dissociation and consequently the number of ions in total volume of solution increases and hence molar conductivity increases sharply.

(b) 2PbSO4(s) + 2H2O(l) → Pb(s) + PbO2(s) + 2H2SO4(aq)

Teacher's Note: Dilution raises dissociation of a weak electrolyte; charging reverses the discharge reaction.

Exam Note: Reason: more dissociation; reverse discharge equation.

Question 5. When a current of 0.75 A is passed through a CuSO4 solution for 25 min, 0.369 g of copper is deposited at the cathode. Calculate the atomic mass of copper.

Solution.

Q = I × t = 0.75 A × 25 × 60 s = 1125 C

Cu2+ + 2e− → Cu: 2 × 96500 C deposit one mole (M g) of Cu.

M = (0.369 × 2 × 96500)/1125 = 63.3 g mol−1 (about 63.3 u)

Teacher's Note: Charge divided by 2F gives moles of copper; mass over moles gives atomic mass.

Exam Note: Find Q, then M = mass × 2F / Q.

Question 6. At what pH of HCl solution will hydrogen gas electrode show electrode potential of −0.118 V? H2 gas is passed at 298 K and 1 atm pressure.

Solution.

2H+ + 2e− → H2; E° = 0

E = E° − (0.059/2) log (pH2/[H+]2) = 0.059 log [H+] (pH2 = 1 atm)

−0.118 = −0.059 pH ⇒ pH = 2

Teacher's Note: For a hydrogen electrode at 1 atm, electrode potential is −0.059 times pH.

Exam Note: E = −0.059 pH, so pH = 2.

Question 7. Calculate the electrode potential of copper electrode dipped in 0.1 M CuSO4 solution at 298 K. Given that E°(Cu2+/Cu) = 0.34 V.

Solution.

Cu2+ + 2e− → Cu

E = E° − (0.059/2) log (1/[Cu2+]) = 0.34 + (0.059/2) log 0.1 = 0.34 − 0.0295 = 0.31 V

Teacher's Note: Apply the Nernst equation with 0.1 M copper ions.

Exam Note: Use E = E° + (0.059/2) log [Cu²⁺].

Question 8. How many molecules of chlorine should be deposited from molten sodium chloride in one minute by a current of 300 milliampere?

Solution.

Q = I × t = 0.300 A × 60 s = 18 C

Number of electrons = (18/96500) × 6.022 × 1023 = 1.12 × 1020

2Cl− → Cl2 + 2e−, so molecules of Cl2 = (1.12 × 1020)/2 = 5.6 × 1019

Teacher's Note: Two electrons release one chlorine molecule, so halve the number of electrons.

Exam Note: Q = It; electrons; then halve for Cl₂.

Question 9. A current of 5 ampere is flowing through a wire for 193 seconds. Calculate the number of electrons flowing through the cross section of wire for 193 seconds.

Solution.

Q = I × t = 5 A × 193 s = 965 C

96500 C is equivalent to flow of 6.022 × 1023 electrons.

∴ 965 C is equivalent to (965/96500) × 6.022 × 1023 = 6.022 × 1021 electrons

Teacher's Note: One faraday carries Avogadro's number of electrons; scale by the charge passed.

Exam Note: Q = It, then multiply by Nₐ/F.

Question 10. Calculate the equilibrium constant for the reaction Cd2+(aq) + Zn(s) → Zn2+(aq) + Cd(s), if E°(Cd2+/Cd) = −0.403 V and E°(Zn2+/Zn) = −0.763 V.

Solution.

E°cell = E°(Cd2+/Cd) − E°(Zn2+/Zn) = −0.403 V − (−0.763 V) = 0.360 V, n = 2

log Kc = nE°cell/0.059 = (2 × 0.360)/0.059 = 12.20

Kc = antilog (12.20) = 1.6 × 1012

Teacher's Note: Standard cell potential gives the equilibrium constant through log K = nE°/0.059.

Exam Note: Find E°cell, then log K = nE°/0.059.

Class 12 Mathematics: Xam Idea Solutions for Xam Idea Solutions Class 12 Chemistry Chapter 3 Electrochemistry Short Answer Questions I

Complete Math Solutions for Xam Idea Solutions Class 12 Chemistry Chapter 3 Electrochemistry Short Answer Questions I

Review detailed solutions for Class 12 Mathematics. The Xam Idea Solutions Class 12 Chemistry Chapter 3 Electrochemistry Short Answer Questions I PDF provides comprehensive answers mapped to standard Xam Idea Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.

Concept-Driven Math Answers

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Explore More Study Resources for Class 12 Math

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these [current-page:node:field_author] Solutions for Class 12 Chemistry?

They are chapter-wise solved questions from the book for Class 12 Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 12 Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 12 Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 12 Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 12 Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.