Xam Idea Solutions Class 12 Chemistry Chapter 3 Electrochemistry Long Answer Questions

Download Class 12 Chemistry Textbook Solutions: Chapter 03 Electrochemistry

Explore reliable textbook solutions for Chapter 03 Electrochemistry tailored for Class 12 learners using methodologies. Utilizing these Chemistry answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.

Access Textbook Answers and Solutions

Access the complete solution PDF for Class 12 Chemistry below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

Long Answer Questions

Question 1. The conductivity of 0.001 mol L−1 solution of CH3COOH is 3.905 × 10−5 S cm−1. Calculate its molar conductivity and degree of dissociation (α). Given λ°(H+) = 349.6 S cm2 mol−1 and λ°(CH3COO−) = 40.9 S cm2 mol−1. Define electrochemical cell. What happens if external potential applied becomes greater than E°cell of electrochemical cell?

Solution.

Λm = κ × 1000/c = (3.905 × 10−5 × 1000)/0.001 = 39.05 S cm2 mol−1

Λ°m = 349.6 + 40.9 = 390.5 S cm2 mol−1; α = 39.05/390.5 = 0.1

A device which is used to convert chemical energy produced in a redox reaction into electrical energy is called an electrochemical cell.

If external potential applied becomes greater than E°cell of electrochemical cell, the reaction gets reversed and the electrochemical cell functions as an electrolytic cell.

Teacher's Note: Degree of dissociation is molar conductivity over limiting value; opposing potential above E° reverses the cell.

Exam Note: Compute Λm and α, then define the cell.

Question 2. Calculate e.m.f and ΔG for the following cell at 298 K: Mg(s) | Mg2+ (0.01 M) || Ag+ (0.0001 M) | Ag(s). Given: E°(Mg2+/Mg) = −2.37 V, E°(Ag+/Ag) = +0.80 V

Solution.

At anode: Mg → Mg2+ + 2e−

At cathode: [Ag+ + e− → Ag] × 2

Cell reaction: Mg + 2Ag+ → Mg2+ + 2Ag; n = 2

E°cell = 0.80 − (−2.37) = 3.17 V

Ecell = 3.17 − (0.059/2) log ([Mg2+]/[Ag+]2) = 3.17 − 0.0295 log (10−2/(10−4)2) = 3.17 − 0.0295 log 106 = 3.17 − 0.177 = 2.993 V

ΔG = −nFEcell = −2 × 96500 × 2.993 = −5.78 × 105 J mol−1 = −577.6 kJ mol−1

Teacher's Note: Use the Nernst equation for E, then delta G = −nFE with n = 2.

Exam Note: Find E°cell, E, then ΔG.

Question 3. State the relationship amongst cell constant of a cell, resistance of the solution in the cell and conductivity of the solution. How is molar conductivity of a solute related to conductivity of its solution? Resistance of a conductivity cell filled with 0.1 mol L−1 KCl solution is 100 Ω. If the resistance of the same cell when filled with 0.02 mol L−1 KCl solution is 520 Ω, calculate the conductivity and molar conductivity of 0.02 mol L−1 KCl solution. The conductivity of 0.1 mol L−1 KCl solution is 1.29 × 10−2 Ω−1 cm−1.

Solution.

Cell constant = conductivity × resistance, i.e., G* = κ × R.

Molar conductivity Λm = κ × 1000/c (c in mol L−1).

For 0.1 mol L−1 KCl: cell constant = 1.29 × 10−2 Ω−1 cm−1 × 100 Ω = 1.29 cm−1

For 0.02 mol L−1 KCl: R = 520 Ω, so κ = G*/R = 1.29/520 = 0.00248 S cm−1

Λm = (0.00248 × 1000)/0.02 = 124 Ω−1 cm2 mol−1

Teacher's Note: The known solution gives the cell constant, which then yields the unknown conductivity.

Exam Note: Find cell constant first.

Question 4. A voltaic cell is set up at 25°C with the following half-cells Al3+ (0.001 M) and Ni2+ (0.50 M). Write an equation for the reaction that occurs when the cell generates an electric current and determine the cell potential. (E°(Ni2+/Ni) = −0.25 V, E°(Al3+/Al) = −1.66 V)

Solution.

2Al(s) + 3Ni2+(aq) → 2Al3+(aq) + 3Ni(s); n = 6

E°cell = −0.25 − (−1.66) = 1.41 V

Ecell = 1.41 − (0.059/6) log ([Al3+]2/[Ni2+]3) = 1.41 − 0.00983 × (−5.10) = 1.46 V

Teacher's Note: Aluminium is oxidised and nickel ions reduced; Nernst gives about 1.46 V.

Exam Note: Balance with n = 6, then use Nernst.

Question 5. Calculate the potential for half-cell containing 0.10 M K2Cr2O7(aq), 0.20 M Cr3+(aq) and 1.0 × 10−4 M H+(aq). The half cell reaction is Cr2O72−(aq) + 14H+(aq) + 6e− → 2Cr3+(aq) + 7H2O(l) and the standard electrode potential is given as E° = 1.33 V.

Solution.

E = E° − (0.059/6) log ([Cr3+]2/([Cr2O72−][H+]14))

= 1.33 − (0.059/6) log ((0.20)2/((0.10)(10−4)14))

= 1.33 − (0.059/6) log (4 × 1055) = 1.33 − (0.059/6) × 55.6 = 1.33 − 0.547 = 0.78 V

Teacher's Note: A very low hydrogen ion concentration lowers the dichromate reduction potential sharply.

Exam Note: Apply Nernst with n = 6 and [H+]14.

Question 6. Using the E° values of A and B, predict which is better for coating the surface of iron [E°(Fe2+/Fe) = −0.44 V] to prevent corrosion and why? Given: E°(A2+/A) = −2.37 V, E°(B2+/B) = −0.14 V

Solution.

A is better for coating, as its standard reduction potential is less than that of B (and of iron); therefore, it will undergo oxidation more easily than B and protect the iron.

Teacher's Note: A metal more easily oxidised than iron acts as a sacrificial coating.

Exam Note: Lower E° metal protects iron.

Question 7. Consider the figure given below and answer the questions (i) to (vi): (i) Write the direction of electron flow. (ii) Is silver plate the anode or cathode? (iii) What will happen if salt bridge is removed? (iv) When will the cell stop functioning? (v) How will concentration of Zn2+ ions and Ag+ ions be affected when the cell functions? (vi) How will the concentration of Zn2+ ions and Ag+ ions be affected after the cell becomes ‘dead’?

Solution.

VSalt bridgeZn in Zn²⁺ solutionAg in Ag⁺ solutionZn plateAg plate

i. Electrons move from Zn to Ag.

ii. Ag is the cathode.

iii. Cell will stop functioning.

iv. When Ecell = 0.

v. Concentration of Zn2+ ions will increase and concentration of Ag+ ions will decrease.

vi. When Ecell = 0, equilibrium is reached and concentration of Zn2+ ions and Ag+ ions will not change.

Teacher's Note: Zinc is the anode, silver the cathode; the cell stops when cell potential reaches zero.

Exam Note: Electrons flow Zn to Ag; Ecell = 0 at the end.

Question 8. The electrochemical cell given alongside converts the chemical energy released during the redox reaction Zn(s) + Cu2+(aq) → Zn2+(aq) + Cu(s) to electrical energy. It gives an electrical potential of 1.1 V when concentration of Zn2+ and Cu2+ ions is unity. State the direction of flow of current and also specify whether zinc and copper are deposited or dissolved at their respective electrodes when (i) an external opposite potential of less than 1.1 V is applied, (ii) an external potential of 1.1 V is applied, (iii) an external potential of greater than 1.1 V is applied.

Solution.

VSalt bridgeZn in Zn²⁺ solutionCu in Cu²⁺ solutionZn plateCu plate

i. Reaction continues to take place. Electrons flow from Zn electrode to copper electrode, hence current flows from Cu to Zn. Zn dissolves and copper deposits at their respective electrodes.

ii. The reaction stops and no current flows. A state of equilibrium is achieved and no change is observed at zinc and copper electrodes.

iii. Reaction takes place in opposite directions. Electrons flow from copper electrode to zinc electrode and hence current flows from Zn to Cu. Zinc deposits and copper dissolves at their respective electrodes. The cell functions as an electrolytic cell.

Teacher's Note: An opposing potential below 1.1 V leaves the cell working; at 1.1 V it stops; above it the reaction reverses.

Exam Note: Compare external potential with 1.1 V.

Question 9. (a) Define the following terms: limiting molar conductivity and fuel cell. (b) Resistance of a conductivity cell filled with 0.1 mol L−1 KCl solution is 100 Ω. If the resistance of the same cell when filled with 0.02 mol L−1 KCl solution is 520 Ω, calculate the conductivity and molar conductivity of 0.02 mol L−1 KCl solution. The conductivity of 0.1 mol L−1 KCl solution is 1.29 × 10−2 Ω−1 cm−1.

Solution.

a. The molar conductivity when concentration approaches zero is called limiting molar conductivity. A fuel cell is a device which converts energy produced during the combustion of fuels like hydrogen, methane, methyl alcohol etc. directly into electrical energy. One such successful fuel cell is the hydrogen-oxygen fuel cell.

b. Cell constant = 1.29 × 10−2 × 100 = 1.29 cm−1. For 0.02 mol L−1 KCl: κ = 1.29/520 = 0.00248 Ω−1 cm−1; Λm = (0.00248 × 1000)/0.02 = 124 Ω−1 cm2 mol−1.

Teacher's Note: Cell constant from the 0.1 M solution gives the conductivity of the 0.02 M solution.

Exam Note: Cell constant first, then κ and Λm.

Question 10. (a) Calculate the standard free energy change for the reaction Au(s) + Ca2+(1 M) → Au3+(1 M) + Ca(s) at 25°C, given E°(Au3+/Au) = +1.50 V and E°(Ca2+/Ca) = −2.87 V. Predict whether the reaction will be spontaneous or not at 25°C. Which of the above two half cells will act as an oxidising agent and which one will be a reducing agent? (b) Tarnished silver contains Ag2S. Can this tarnish be removed by placing tarnished silver ware in an aluminium pan containing an inert electrolytic solution such as NaCl? The standard electrode potential for the half reaction Ag2S(s) + 2e− → 2Ag(s) + S2− is −0.71 V, and for Al3+/Al is −1.66 V.

Solution.

a. Balanced reaction: 2Au(s) + 3Ca2+ → 2Au3+ + 3Ca(s); n = 6

E°cell = E°cathode − E°anode = (−2.87) − (+1.50) = −4.37 V

ΔG° = −nFE° = −6 × 96500 × (−4.37) = +2.53 × 106 J = +2530 kJ

ΔG° is positive (E°cell negative), so the reaction is not spontaneous. The Au3+/Au half cell (higher E°) acts as the oxidising agent and the Ca2+/Ca half cell (calcium metal) acts as the reducing agent.

b. E°cell for the reaction of tarnished silver ware with the aluminium pan is (−0.71 V) − (−1.66 V) = +0.95 V. Tarnished silver ware, therefore, can be cleaned by placing it in an aluminium pan, as E°cell is positive.

Teacher's Note: Negative standard cell potential means non-spontaneous; aluminium reduces silver sulphide because the cell potential is positive.

Exam Note: Compute E°cell, then ΔG° = −nFE°.

Question 11. At 291 K, the molar conductivities at infinite dilution of NH4Cl, NaOH and NaCl are 129.8, 217.4 and 108.9 S cm2 mol−1 respectively. If the molar conductivity of a centinormal solution of NH4OH is 9.33 S cm2 mol−1, what is the percentage dissociation of NH4OH at this dilution? Also calculate the dissociation constant of NH4OH.

Solution.

Λ°m(NH4OH) = Λ°m(NH4Cl) + Λ°m(NaOH) − Λ°m(NaCl) = 129.8 + 217.4 − 108.9 = 238.3 S cm2 mol−1

α = Λm/Λ°m = 9.33/238.3 = 0.0392, i.e., 3.92% dissociation

c = 0.01 M: Kb = cα2/(1 − α) = (0.01 × (0.0392)2)/(1 − 0.0392) = 1.6 × 10−5

Teacher's Note: Apply Kohlrausch's law to find the limiting value, then use alpha and Ostwald dilution law.

Exam Note: Combine the three limiting values.

Question 12. (a) State two advantages of H2–O2 fuel cell over ordinary cell. (b) Silver is electrodeposited on a metallic vessel of total surface area 500 cm2 by passing a current of 0.5 amp for two hours. Calculate the thickness of silver deposited. [Given: Density of silver = 10.5 g cm−3, Atomic mass of silver = 108 amu, F = 96500 C mol−1]

Solution.

a. Advantages of fuel cell: (i) It is a pollution-free device since no harmful products are formed. (ii) Its efficiency is about 60–75%, which is considerably higher than conventional cells. (iii) It is a continuous source of energy if the supply of gases is maintained. (Any two)

b. Q = I × t = 0.5 A × 7200 s = 3600 C

Mass of Ag deposited = (108 × 3600)/96500 = 4.03 g

Volume = mass/density = 4.03/10.5 = 0.384 cm3

Thickness = volume/area = 0.384/500 = 7.7 × 10−4 cm

Teacher's Note: Charge gives mass of silver; mass and density give volume; volume over area is thickness.

Exam Note: Find mass, volume, then thickness.

Step-by-Step Xam Idea Solutions for Class 12 Math

Complete Math Solutions for Xam Idea Solutions Class 12 Chemistry Chapter 3 Electrochemistry Long Answer Questions

Explore reliable mathematical solutions for Xam Idea Solutions Class 12 Chemistry Chapter 3 Electrochemistry Long Answer Questions tailored for Class 12 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.

Detailed Calculation Guides for Class 12

Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.

Additional Study Materials for 2026

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these [current-page:node:field_author] Solutions for Class 12 Chemistry?

They are chapter-wise solved questions from the book for Class 12 Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 12 Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 12 Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 12 Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 12 Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.