Pradeep's KL Gogia Solutions Class 12 Chemistry Chapter 3 Electro Chemistry Concept

Official Pradeep's KL Gogia Textbook Solutions: Class 12 Chemistry Chapter 03 Electro Chemistry Concept

Review structured textbook solutions for Class 12 Chemistry Chapter 03 Electro Chemistry Concept prepared by Pradeep's KL Gogia. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.

Chapter-wise Solutions for Chemistry: Chapter 03 Electro Chemistry Concept

Access the complete solution PDF for Class 12 Chemistry below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

Electrochemistry Concepts - Pages 34-55 (Pradeep's KL Gogia Chemistry Class 12)

Very Short Answer Type Questions (1 Mark)

Question VSA Q.1 What is the effect of temperature on molar conductivity ?

Solution. Molar conductivity of an electrolyte increases with increase of temperature.

Teacher's Note: Higher temperature lowers viscosity and raises ionic mobility, so conductance rises.

Exam Note: One-line answer earns the full mark.

Question VSA Q.2 Why is it not possible to measure single electrode potential ?

Solution. Because the half cell containing single electrode cannot exist independently, as charge cannot flow on its own in a single electrode.

Teacher's Note: Only a potential difference between two half cells can be measured; hence the SHE reference.

Exam Note: Mention the need for a second half cell.

Question VSA Q.3 Name the factor on which emf of a cell depends.

Solution. Emf of a cell depends on following factors :
(a) Nature of reactants
(b) Concentration of solution in two half cells
(c) Temperature

Teacher's Note: These are exactly the variables appearing in the Nernst equation and E°.

Exam Note: List all three factors for full marks.

Question VSA Q.4 What is the effect of temperature on the electrical conductance of metal ?

Solution. Temperature increases, electrical conductance decreases.

Teacher's Note: Metallic conduction is by electrons; hotter lattice vibrations scatter them more, raising resistance.

Exam Note: Contrast with electrolytes to avoid sign errors.

Question VSA Q.5 What is the effect of temperature on the electrical conductance of electrolyte ?

Solution. Temperature increases, electrical conductance increases.

Teacher's Note: Ionic mobility rises as viscosity of the solvent falls; opposite to metals.

Exam Note: State the direction clearly: increases.

Question VSA Q.6 What is the relation between conductance and conductivity ?

Solution. Λmc = k / C

Teacher's Note: The book's answer relates molar conductivity to conductivity k and concentration C (units must match, e.g. C in mol cm-3).

Exam Note: Write the formula with symbols defined.

Question VSA Q.7 What is the Debye-Huckel-Onsagar equation ?

Solution. Λmc = Λmo − A√C

Teacher's Note: Valid for strong electrolytes: molar conductivity falls linearly with √C; slope is A.

Exam Note: Quote the equation and name A as a constant.

Question VSA Q.8 Reduction potentials of 4 metals A, B, C and D are − 1.66 V, + 0.34 V, + 0.80 V and − 0.76 V. What is the order of their reducing power and reactivity ?

Solution. A > D > B > C

Teacher's Note: Lower (more negative) reduction potential means stronger reducing agent, so rank by ascending E°.

Exam Note: Order by increasing reduction potential.

Question VSA Q.9 Why does a dry cell become dead even if it has not been used for a long time ?

Solution. NH4Cl is acidic in nature. It corrodes zinc container.

Teacher's Note: Acidic NH4Cl paste slowly attacks the zinc anode even without current.

Exam Note: Mention acidic NH4Cl and zinc corrosion.

Question VSA Q.10 Write the overall reaction taking place in rusting.

Solution. 2Fe + O2 + 4H+ → 2Fe2+ + 2H2O

Teacher's Note: Fe oxidises at anode, O2 reduces at cathode; Fe2+ is later oxidised to rust.

Exam Note: Balance both atoms and charge.

Question VSA Q.11 Write the reaction taking place in the cell : Al/Al3+ || Cu2+/Cu

Solution. 2Al + 3Cu2+ → 2Al3+ + 3Cu

Teacher's Note: Equalise electrons: 6 e- lost by 2 Al, gained by 3 Cu2+.

Exam Note: Marks for correct coefficients.

Question VSA Q.12 Why Na cannot be obtained by the electrolysis of aqueous NaCl solution ?

Solution. Due to low reduction potential, Na+ ions are not reduced at cathode. Instead, H+ are reduced and H2 is obtained.

Teacher's Note: Water is reduced in preference to Na+; molten NaCl is needed for sodium.

Exam Note: Compare reduction preference of Na+ and H+.

Question VSA Q.13 What is the use of platinum foil in the hydrogen electrode ?

Solution. It is used for the inflow and outflow of electrons.

Teacher's Note: Pt is inert, conducts electrons and adsorbs H2 gas on its platinised surface.

Exam Note: Say inert conductor supplying electron path.

Question VSA Q.14 Why Λmo for CH3COOH cannot be determined experimentally ?

Solution. Molar conductivity of weak electrolytes keeps on increasing with dilution and does not become constant even at very large dilution.

Teacher's Note: Weak electrolytes ionise more on dilution, so no limiting plateau; use Kohlrausch's law instead.

Exam Note: Mention no constant value even at high dilution.

Question VSA Q.15 Why is it necessary to use a salt bridge in a galvanic cell ?

Solution. To complete the inner circuit and to maintain electrical neutrality of the electrolytic solutions of the half cells.

Teacher's Note: Without it charge builds up in each half cell and current stops quickly.

Exam Note: Give both roles: circuit completion and neutrality.

Question VSA Q.16 Why does mercury cell gives a constant voltage throughout its life ?

Solution. This is because the overall cell reaction does not have any ionic concentration in it.

Teacher's Note: Overall reaction Zn + HgO → ZnO + Hg involves no ions, so emf stays constant.

Exam Note: Link constant emf to no ion concentration change.

Question VSA Q.17 What is the role of ZnCl2 in a dry cell ?

Solution. ZnCl2 combines with the NH3 produced to form a complex salt [Zn(NH3)4]2+.

Teacher's Note: Removing NH3 prevents gas build-up and polarisation at the cathode.

Exam Note: Mention complex formation with NH3.

Question VSA Q.18 Why does the conductivity of a solution decrease with dilution ?

Solution. Conductivity of a solution is dependent on the number of ions per unit volume. On dilution, the number of ions per unit volume decreases, hence the conductivity decreases.

Teacher's Note: Conductivity k falls on dilution, yet molar conductivity rises; do not confuse the two.

Exam Note: Say ions per unit volume decrease.

Question VSA Q.19 Suggest two materials other than hydrogen that can be used as fuels in fuel cells.

Solution. Methane and methanol.

Teacher's Note: Any fuel oxidised at the anode with O2 at the cathode can serve.

Exam Note: Name two fuels.

Question VSA Q.20 How does the pH of Al-NaCl solution be affected when it is electrolysed ?

Solution. When Al-NaCl solution is electrolysed, H2 is liberated at cathode, Cl2 at anode and NaOH is formed in the solution. Hence pH of solution increases.

Teacher's Note: Aqueous NaCl (brine): OH- accumulates as H+ is discharged, so the solution turns basic.

Exam Note: State products and conclude pH increases.

Question VSA Q.21 Which reference electrode is used to measure the electrode potential of other electrodes.

Solution. SHE, whose electrode potential is taken as zero.

Teacher's Note: The standard hydrogen electrode (1 atm H2, 1 M H+, Pt) is the primary reference.

Exam Note: Write SHE with its value, zero.

Question VSA Q.22 Out of zinc and tin, which one protects iron better even after cracks and why ?

Solution. Zinc protects better because oxidation of zinc is greater but that of tin is less than that of iron.

Teacher's Note: Zinc is more easily oxidised than iron (sacrificial protection); tin is less so and speeds iron rusting once cracked.

Exam Note: Compare oxidation tendency with iron.

Question VSA Q.23 Define corrosion. What is the chemical formula of rust ?

Solution. Corrosion is the slow eating away of the surface of the metal due to attack of atmospheric gases. Fe2O3·xH2O.

Teacher's Note: Rust is hydrated iron(III) oxide; x varies, so it is written as xH2O.

Exam Note: Definition plus formula with xH2O.

Question VSA Q.24 What is the EMF of the cell when the cell reaction attains equilibrium ?

Solution. Zero.

Teacher's Note: At equilibrium Q = K and ΔG = 0, so Ecell = 0 and the cell is dead.

Exam Note: Answer zero and relate to ΔG = 0.

Question VSA Q.25 What is the electrolyte used in a dry cell ?

Solution. A paste of NH4Cl.

Teacher's Note: The paste is NH4Cl with ZnCl2; MnO2 and carbon surround the graphite cathode.

Exam Note: Name NH4Cl paste.

Short Answer-I Type Questions (2 Marks)

Question SA-I Q.1 How can you increase the reduction potential of an electrode for the reaction : Mn+ (aq) + ne- → M (s)

Solution. Nernst equation is :
EMn+/M = E°Mn+/M − (0.0591/n) log (1/[Mn+])
EMn+/M can be increased by
(a) Increase in concentration of Mn+ ions in solution.
(b) By increasing the temperature.

Teacher's Note: Larger [Mn+] makes log term smaller, so E rises; temperature enters through RT/nF.

Exam Note: Write Nernst equation, then both factors.

Question SA-I Q.2 Calculate emf of the following cell at 298 K :
Mg (s) + 2Ag+ (0.0001M) → Mg2+ (0.130 M) + 2Ag (s)
[Given : E°cell = 3.17 V]

Solution. n = 2
The Nernst equation for the cell is :
E = E° − (0.059/2) log ([Mg2+] / [Ag+]2)
= 3.17 − (0.059/2) log (0.130 / (0.0001)2)
= 3.17 − 0.21 = 2.96 V

Teacher's Note: Q = 0.130/10-8 = 1.3×107; square the Ag+ concentration in Q.

Exam Note: Substitute n = 2 and square [Ag+].

Question SA-I Q.3 Suggest a way to determine the Λmo value of water.

Solution. Λmo(H2O) = Λmo(H+) + Λmo(OH-)
It can be determine from the value of Λmo (HCl), Λmo (NaOH) and Λmo (NaCl). Then,
Λmo (H2O) = Λmo (HCl) + Λmo (NaOH) − Λmo (NaCl)

Teacher's Note: Kohlrausch's law: Cl- and Na+ contributions cancel, leaving H+ and OH-.

Exam Note: Show the combination with correct signs.

Question SA-I Q.4 How much electricity in term of Faraday is required to produce 40 gram of Al from Al2O3 ? (Atomic mass of Al = 27 g/mol)

Solution. Al3+ + 3e- → Al
27 gram of Al require electricity = 3F
40 gram of Al require electricity = (3F/27) × 40 = 4.44 F

Teacher's Note: Check: 40/27 = 1.481 mol Al × 3 = 4.44 F.

Exam Note: Use 3 electrons per Al atom.

Question SA-I Q.5 Predict the product of electrolysis of an aqueous solution of CuCl2 with an inert electrode.

Solution. CuCl2 (s) + Aq → Cu2+ + 2Cl-
H2O → H+ + OH-
At cathode (Reduction) : Cu2+ will be reduced in preference to H+ ions.
Cu2+ + 2e- → Cu(s)
At anode (Oxidation) : Cl- ions will be oxidized in preference to OH- ions.
Cl- → ½Cl2 + 1e-
Thus, Cu will be deposited at cathode and Cl2 will be liberated at anode.

Teacher's Note: Cu2+ has higher reduction potential than water, so copper deposits.

Exam Note: Give electrode-wise products with half reactions.

Question SA-I Q.6 Calculate Λmo for CaCl2 and MgSO4 from the following data :
Λmo(Ca2+) = 119.0, Mg2+ = 106.0, Cl- = 76.3 and SO42- = 160.05 cm2 mol-1

Solution. Λmo(CaCl2) = Λmo(Ca2+) + 2Λmo(Cl-) = 119 + (2 × 76.3) = 271.6 S cm2 mol-1
Λmo(MgSO4) = Λmo(Mg2+) + Λmo(SO42-) = 106 + 160 = 266 S cm2 mol-1

Teacher's Note: Multiply each ion's value by its stoichiometric number; 106 + 160.05 is 266.05, rounded.

Exam Note: Show Kohlrausch sum with coefficients.

Question SA-I Q.7 If Λmo for AgNO3, KCl and KNO3 are 133.4, 149.9 and 144.9 S cm2 mol-1, calculate Λmo for AgCl.

Solution. 138.4 S cm2 mol-1

Teacher's Note: Λ(AgCl) = Λ(AgNO3) + Λ(KCl) − Λ(KNO3) = 133.4 + 149.9 − 144.9 = 138.4.

Exam Note: Add and subtract salts so unwanted ions cancel.

Question SA-I Q.8 Calculate the potential of hydrogen electrode in contact with a solution whose pH is 10.

Solution. H+ + e- → ½H2, n = 1
E = E° − (0.0591/n) log (1/[H+])
E = 0 − (0.0591/1) × pH
E = − 0.0591 × 10
E = − 0.591 V

Teacher's Note: log(1/[H+]) equals pH, so E = −0.0591 × pH at 298 K.

Exam Note: Use E° = 0 for hydrogen electrode.

Question SA-I Q.9 If a current of 0.5 amp flows through a metallic wire for 2 hours, how many electrons would flow through the wire ?

Solution. q = i × t = 0.5 × 2 × 60 × 60 = 3600 C
96500 Coulombs are equal to 6.022 × 1023 e-
So, 3600 Coulombs = (6.022 × 1023/96500) × 3600 = 2.246 × 1022 electrons

Teacher's Note: Convert hours to seconds first; 1 F carries one mole of electrons.

Exam Note: Compute charge, then scale by Faraday.

Question SA-I Q.10 How much electricity is required in Coulomb for the oxidation of 1 mole of FeO to Fe2O3 ?

Solution. Fe2+ → Fe3+ + 1e-
So, 1F = 1 × 96500 C = 96500 C

Teacher's Note: Each Fe2+ loses one electron, so 1 mol FeO needs 1 mol electrons.

Exam Note: Identify one electron per Fe2+.

Question SA-I Q.11 The conductivity of a 0.20M solution of KCl at 298K is 0.0248 S cm-1. Calculate molar conductivity.

Solution. Molar conductivity = (k × 1000)/M = (0.0248 S cm-1 × 1000 cm3 L-1)/(0.2 mol L-1) = 124.0 S cm2 mol-1

Teacher's Note: Factor 1000 converts litres to cm3; units come out S cm2 mol-1.

Exam Note: Show formula, substitution and unit.

Question SA-I Q.12 Define conductivity and molar conductivity for a solution of an electrolyte.

Solution. Conductivity is defined as ease with which current flows through electrolyte. It is reciprocal of specific resistance. Molar conductivity is conductance of all the ions produced by one mole of electrolyte when electrodes are at unit distance apart and have sufficient area of cross-section to hold electrolyte.

Teacher's Note: Conductivity is per unit volume; molar conductivity covers one mole between electrodes 1 cm apart.

Exam Note: Define both, giving units if possible.

Question SA-I Q.13 The resistance of conductivity cell containing 0.001M KCl solution at 298K is 1500Ω. What is the cell constant if the conductivity of 0.001M KCl solution at 298K is 0.146 × 10-3 S cm-1.

Solution. Cell constant = Conductivity × Resistance
= 0.146 × 10-3 S cm-1 × 1500 Ω = 0.219 cm-1

Teacher's Note: Cell constant G* = l/A = k × R, in cm-1.

Exam Note: Substitute directly; unit cm-1 scores.

Question SA-I Q.14 Indicate the reactions which take place at cathode and anode in fuel cell.

Solution. At cathode : O2 (g) + 2H2O + 4e- → 4OH- (aq)
At anode : 2H2 (g) + 4OH- (aq) → 4H2O + 4e-
The overall reaction is : 2H2 (g) + O2 (g) → 2H2O (l)
Corrected: the book prints 4H2O as product; adding the two half reactions (2H2O cancels) gives 2H2O.

Teacher's Note: Cancel OH- and 2H2O between the half reactions to get the overall equation.

Exam Note: Write 2H2O in the overall equation.

Question SA-I Q.15 Explain Kohlrausch's law of independent migration of ions.

Solution. It states that at infinite dilution, molar conductivity of an electrolyte is equal to sum of contributions due to cation as well as anion.
Λm∞(Na2SO4) = 2Λm∞(Na+) + Λm∞(SO42-)

Teacher's Note: Each ion contributes independently at infinite dilution, weighted by its number in the formula.

Exam Note: State law with a worked formula example.

Question SA-I Q.16 Write the electrode reactions for anode and cathode in a mercury cell.

Solution. At anode : Zn (amalgam) + 2OH- → ZnO + H2O + 2e-
At cathode : HgO (s) + H2O (l) + 2e- → Hg (l) + 2OH- (aq)
The overall reaction is : Zn (amalgam) + HgO (s) → ZnO (s) + Hg (l)

Teacher's Note: Hydroxide cancels in the overall reaction, hence constant emf (about 1.35 V).

Exam Note: Give both half reactions plus overall.

Question SA-I Q.17 The standard reduction potential for the Zn2+ (aq)/Zn (s) half cell is − 0.76 V. Write the reactions occurring at the electrodes when coupled with standard hydrogen electrode (SHE).

Solution. At anode : Zn (s) → Zn2+ (aq) + 2e-
At cathode : 2H+ + 2e- → H2 (g)
Zn (s) + 2H+ (aq) → Zn2+ (aq) + H2 (g)

Teacher's Note: Negative E° means zinc is oxidised against SHE; E°cell = 0 − (−0.76) = +0.76 V.

Exam Note: Decide anode and cathode from sign of E°.

Question SA-I Q.18 Calculate the electrode potential of a copper wire dipped in 0.1M CuSO4 solution at 25°C. The standard electrode potential of copper is 0.34 Volt.

Solution. The electrode reaction written as reduction potential is Cu2+ + 2e- → Cu, n = 2
ECu2+/Cu = E°Cu2+/Cu − (0.0591/2) log (1/[Cu2+]) = 0.34 − (0.0591/2) log (1/0.1) = 0.3104 V

Teacher's Note: log(1/0.1) = 1, so subtract 0.02955 from 0.34 to get about 0.3104 V.

Exam Note: Write reduction half reaction first, then substitute.

Question SA-I Q.19 Two metals A and B have reduction potential values − 0.76 V and + 0.34 V respectively. Which of these will liberate H2 from dil. H2SO4 ?

Solution. Metal having higher oxidation potential will liberate H2 from H2SO4. Thus, A will liberate H2 from H2SO4.

Teacher's Note: Only metals with negative E° (above H in the series) displace hydrogen from dilute acid.

Exam Note: Compare each E° with 0 V of SHE.

Question SA-I Q.20 How does conc. of sulphuric acid change in lead storage battery when current is drawn from it ?

Solution. Concentration of sulphuric acid decreases.

Teacher's Note: Discharge: Pb + PbO2 + 2H2SO4 → 2PbSO4 + 2H2O consumes acid and makes water.

Exam Note: Say decreases, giving the reason: H2SO4 consumed.

Question SA-I Q.21 What type of a battery is lead storage cell ? Write the anode and cathode reaction and overall reaction occurring in a lead storage battery during discharging and recharging of cell.

Solution. It is a secondary cell.
Anode reaction : Pb + SO42- → PbSO4 + 2e-
Cathode reaction : PbO2 + 4H+ + SO42- + 2e- → PbSO4 + 2H2O
Pb (s) + PbO2 (s) + 2H2SO4 ⇌ 2PbSO4 (s) + 2H2O (l) (forward on discharging, reverse on recharging)

Teacher's Note: Secondary cells are rechargeable; recharging reverses the overall reaction, restoring Pb, PbO2 and acid.

Exam Note: Give both half reactions and reversible overall equation.

Question SA-I Q.22 Why does the cell potential of mercury cell remain constant throughout its life ?

Solution. This is because the overall cell reaction does not involve any ion in the solution whose concentration changes during its life time.

Teacher's Note: Overall Zn + HgO → ZnO + Hg has no ionic species, so Nernst Q does not change.

Exam Note: Link constant potential to no ion in the overall reaction.

Question SA-I Q.23 Why is alternating current used for measuring resistance of an electrolytic solution ?

Solution. The alternating current is used to prevent electrolysis so that the concentration of ions in the solution remains constant.

Teacher's Note: Direct current would electrolyse the solution, changing ion concentration and the measured resistance.

Exam Note: State AC prevents electrolysis and keeps concentration constant.

Question SA-I Q.24 Consider a cell given below : Cu|Cu2+ || Cl-1 |Cl2 (Pt)
Write the reaction that occur at anode and cathode of the cell

Solution. Anode : Cu → Cu2+ + 2e-
Cathode : Cl2 + 2e- → 2Cl-1

Teacher's Note: In cell notation the left electrode is anode (oxidation) and the right electrode is cathode (reduction).

Exam Note: Anode is on the left of the cell diagram.

Question SA-I Q.25 Suggest two materials other than hydrogen that can be used as fuels in fuel cells.

Solution. Methane and Ethane.

Teacher's Note: Hydrocarbons and alcohols can be oxidised at the anode of fuel cells; methane and methanol are the usual examples.

Exam Note: Name two fuels.

Question SA-I Q.26 E0 values of MnO4-, Ce4+ and Cl2 are 1.507, 1.61 and 1.358 V respectively. Arrange these in order of increasing strength as oxidizing agent.

Solution. Cl2 < MnO4- < Ce4+

Teacher's Note: Higher reduction potential means stronger oxidising agent: 1.358 < 1.507 < 1.61.

Exam Note: Arrange in increasing order of E°.

Question SA-I Q.27 Draw a graph between Λmo and √C for strong and weak electrolyte.

Solution. Strong electrolyte: Λm decreases linearly as √C increases (straight line with negative slope; intercept is Λmo).

Λm√CStrong electrolyte

Weak electrolyte: Λm falls steeply at low concentration and the curve rises sharply towards √C = 0, so Λmo cannot be found by extrapolation.
Λm√CWeak electrolyte

Teacher's Note: Strong electrolytes give a straight line to extrapolate for Λ°; weak electrolytes give a steep curve.

Exam Note: Draw both graphs with axes labelled.

Question SA-I Q.28 The conductivity of 0.02M solution of NaCl is 2.6 × 10-2 S cm-1. What is its molar conductivity ?

Solution. k = 2.6 × 10-2 S cm-1, C = 0.02 M
Λm = (k × 1000)/C (M) = (2.6 × 10-2 × 1000)/0.02 = (26 × 100)/(0.02 × 100) = 26 × 102/2 = 13 × 102 S cm2 mol-1 (= 1300; the book prints the unit as S cm mol-1)

Teacher's Note: 2.6×10-2×1000 = 26; divided by 0.02 gives 1300.

Exam Note: Use unit S cm2 mol-1.

Question SA-I Q.29 Give products of electrolysis of an aqueous solution of AgNO3 with silver electrode.

Solution. At anode : Ag (s) → Ag+ + e-
At cathode : Ag+ + e- → Ag (s)

Teacher's Note: Active silver electrodes dissolve at anode and silver plates at cathode; no gas is produced.

Exam Note: Mention anode dissolves, silver deposits.

Short Answer-II Type Questions

Question SA-II Q.1 A solution of CuSO4 is electrolysed for 10 mins. with a current of 1.5 amperes. What is the mass of copper deposited at the cathode ?

Solution. I = 1.5 A, Time = 10 × 60 s = 600 s
Q = I × t = 1.5 × 600 = 900 C
Cu2+ + 2e- → Cu (s)
2F amount of electricity deposit copper = 63.5 g
900 C amount of electricity deposit copper = (63.5 × 900)/(2 × 96500) = 0.296 g

Teacher's Note: 63.5×900/193000 = 0.2961 g; convert minutes to seconds first.

Exam Note: Compute Q, then use 2F per mole of Cu.

Question SA-II Q.2 Depict the galvanic cell in which the reaction Zn (s) + 2Ag+ → Zn2+ + 2Ag (s) takes place. Further show :
(a) Which of the electrode is negatively charged ?
(b) The carriers of the current in the cell.
(c) Individual reaction at each electrode.

Solution. Zn (s)|Zn2+ (aq) || Ag+ (aq)|Ag (s)
(a) Zn electrode (anode)
(b) Ions are carriers of the current in the cell.
(c) At anode : Zn (s) → Zn2+ + 2e-
At cathode : Ag+ + e- → Ag (s)

Teacher's Note: In a galvanic cell the anode is negative; electrons flow externally from Zn to Ag, ions carry current inside.

Exam Note: Write cell diagram and label anode negative.

Question SA-II Q.3 The resistance of a conductivity cell containing 0.001M KCl solution at 298 K is 1500 Ω. What is the cell constant if conductivity of 0.001M KCl solution at 298 K is 0.146 × 10-3 S cm-1 ?

Solution. Cell constant = k × R = 0.146 × 10-3 × 1500 = 0.219 cm-1

Teacher's Note: Cell constant equals conductivity times measured resistance (G* = kR).

Exam Note: Include unit cm-1.

Question SA-II Q.4 Predict the products of electrolysis in each of the following :
(a) An aqueous solution of AgNO3 with platinum electrodes.
(b) An aqueous solution of CuCl2 with Pt electrodes.

Solution. (a) At anode (Oxidation) : 4OH- − 4e- → 2H2O + O2
At cathode (Reduction) : Ag+ + e- → Ag (s)
(b) At anode (Oxidation) : Cl- − e- → Cl (g), Cl + Cl → Cl2
At cathode (Reduction) : Cu2+ + 2e- → Cu (s)

Teacher's Note: With inert Pt, Ag+/Cu2+ are reduced; OH- is oxidised in (a), Cl- in (b).

Exam Note: Give electrode products for both cells.

Question SA-II Q.5 The standard reduction potential for Cu2+/Cu is 0.34 V. Calculate the reduction potential at pH = 14 for the above couple. Ksp of Cu(OH)2 is 1 × 10-19.

Solution. pH = 14, [H+] = 10-14 (∵ pH = − log [H+])
Kw = [H+][OH-], [OH-] = 10-14/10-14 = 1
Cu(OH)2 → Cu2+ + 2OH-
Ksp = [Cu2+][OH-]2, 1 × 10-19 = [Cu2+](1)2, [Cu2+] = 1 × 10-19
For the cell reaction, Cu2+ + 2e- → Cu (s)
E = E° − (0.059/2) log (1/[Cu2+]) = 0.34 − (0.059/2) log (1/(1 × 10-19)) = 0.34 − (0.059/2) × 19 = − 0.22 V

Teacher's Note: Get [OH-] from pH, then [Cu2+] from Ksp, then apply Nernst.

Exam Note: Show [Cu2+] derivation before Nernst.

Question SA-II Q.6 Determine the values of equilibrium constant Kc and ΔG° for the following reaction :
Ni (s) + 2Ag+ (aq) → Ni2+ (aq) + 2Ag (s)   E° = 1.05 V

Solution. ΔG° = − nFE°cell; n = 2, E°cell = 1.05 V, F = 96500 C mol-1
ΔG° = − 2 × 1.05 × 96500 = − 202.650 kJ
ΔG° = − RT ln Kc
ln Kc = − ΔG°/RT = 202.650 × 103/(8.314 × 298)
Kc = 3.32 × 1035

Teacher's Note: Two electrons transferred; ln K = 81.8, which is log K ≈ 35.5.

Exam Note: Use ΔG° = −nFE° and ΔG° = −RT ln K.

Question SA-II Q.7 The Ksp for AgCl at 298 K is 1.0 × 10-10. Calculate the electrode potential for Ag+/Ag electrode immersed in 1.0 M KCl solution. Given E°Ag+/Ag = 0.80 V.

Solution. AgCl (s) ⇌ Ag+ + Cl-, Ksp = [Ag+][Cl-], [Cl-] = 1.0 M
[Ag+] = Ksp/[Cl-] = 1 × 10-10 M
Ag+ + e- → Ag (s)
E = E° − (0.059/1) log (1/[Ag+]) = 0.80 − (0.059/1) log (1/10-10) = 0.80 − 0.059 × 10 = 0.21 V

Teacher's Note: Chloride fixes [Ag+] through Ksp; low [Ag+] lowers E sharply.

Exam Note: Find [Ag+] from Ksp first.

Question SA-II Q.8 Estimate the minimum potential difference needed to reduce Al2O3 at 500°C. The free energy change for the decomposition reaction : (2/3)Al2O3 → (4/3)Al + O2 is ΔG = + 960 kJ, F = 96500 C mol-1.

Solution. (2/3)Al2O3 → (4/3)Al + O2
n = (6 × 2)/3 = 4e-
ΔG = − nFE; ΔG = 960 × 103 J, n = 4, F = 96500 C mol-1
960 × 103 = − 4 × 96500 × E, E = − 2.487 V
Minimum potential difference needed to reduce Al2O3 = − 2.487 V.

Teacher's Note: Positive ΔG means non-spontaneous, so an external potential of at least 2.487 V must be applied.

Exam Note: Find n = 4 first, then E from ΔG = −nFE.

Question SA-II Q.9 Two electrolytic cells containing silver nitrate solution and copper sulphate solution are connected in series. A steady current of 2.5 amp was passed through them till 1.078 g of Ag were deposited. How long did the current flow ? What weight of copper will be deposited ? (Ag = 107.8 u, Cu = 63.5 u)

Solution. w = z × i × t, t = w/(z × i)
t = (1.078 × 1 × 96500)/(107.8 × 2.5) = 386 seconds
Cu2+ + 2e- → Cu
w = (63.5/(2 × 96500)) × 2.5 × 386 = 0.3175 gram

Teacher's Note: In series, same charge passes through both cells; time found from Ag, then copper from the same Q.

Exam Note: Use equivalent mass of Cu as 63.5/2.

Question SA-II Q.10 A solution of Ni(NO3)2 is electrolysed between platinum electrodes using a current of 5.0 amp for 20 minutes. What mass of the nickel will be deposited at the cathode ? (Ni = 58.7 u)

Solution. w = z × i × t, z = 58.7/(2 × 96500)
w = (58.7/(2 × 96500)) × 5.0 × 20 × 60 = 1.825 gram

Teacher's Note: Ni2+ needs 2 electrons; time must be in seconds (1200 s).

Exam Note: Convert 20 minutes to 1200 s.

Question SA-II Q.11 The cell in which the following reaction occurs : 2Fe3+ (aq) + 2I- (aq) → 2Fe2+ (aq) + I2 (s) has E°cell = 0.236 V.
Calculate the standard Gibbs energy and the equilibrium constant of the cell reaction.

Solution. n = 2
ΔG° = − nFE°cell = − 2 × 96500 × 0.236 J = − 45.55 kJ/mol
ΔG° = − 2.303 RT log Kc
log Kc = ΔG°/(− 2.303RT) = (45.55 × 103)/(2.303 × 8.314 × 298) = 7.983
Kc = antilog (7.983) = 9.616 × 107

Teacher's Note: Cell reaction has two electrons for 2Fe3+; keep ΔG in joules inside the log formula.

Exam Note: Use n = 2 and convert kJ to J.

Question SA-II Q.12 The molar conductivity of 0.025 mol L-1 methanoic acid is 46.1 S cm2 mol-1. Calculate its degree of dissociation and dissociation constant. Given Λ°(H+) = 349.6 S cm2 mol-1, Λ°(HCOO-) = 54.6 S cm2 mol-1.

Solution. Λmo(HCOOH) = Λmo(H+) + Λmo(HCOO-) = 349.6 + 54.6 = 404.2 S cm2 mol-1
Λmc = 46.1 S cm2 mol-1
HCOOH ⇌ HCOO- + H+
α = Λmc/Λmo = 46.1/404.2 = 0.114
Initial conc. C, 0, 0; at equilibrium C(1 − α), Cα, Cα
Ka = Cα2/(1 − α) = 0.025 × (0.114)2/(1 − 0.114) = 3.67 × 10-4

Teacher's Note: Kohlrausch's law gives Λ° of a weak acid; then α = Λc/Λ° feeds into Ostwald's expression.

Exam Note: Find Λ° first, then α, then Ka.

Question SA-II Q.13 Calculate the standard cell potentials of galvanic cells in which the following reaction take place :
2Cr (s) + 3Cd2+ (aq) → 2Cr3+ (aq) + 3Cd (s)
Also calculate ΔG° and equilibrium constant of the reaction.

Solution. E°cell = E°cathode − E°anode = − 0.40 − (− 0.74) = 0.34 V
ΔG° = − nFE°cell = − 6 × 96500 × 0.34 = − 196860 J mol-1 = − 196.86 kJ/mol
− ΔG° = 2.303 RT log Kc, 196860 = 2.303 × 8.314 × 298 log Kc
log Kc = 34.5014
Kc = antilog 34.5014 = 3.192 × 1034

Teacher's Note: Balanced reaction transfers 6 electrons (2 Cr × 3 e-);

Exam Note: Take n = 6 from the balanced equation.

Question SA-II Q.14 Calculate the potential of the following cell Sn4+ (1.5 M) + Zn → Sn2+ (0.5 M) + Zn2+ (2M).
Given : E°Sn4+/Sn2+ = 0.13 V, E°Zn2+/Zn = −0.76 V
Will the cell potential ↑ or ↓ if the concentration of Sn4+ is increased ?

Solution. Ecell = E°cell − (0.0591/n) log ([Sn2+][Zn2+]/([Sn4+][Zn]))
= 0.89 − (0.0591/2) log (0.5 × 2/(1.5 × 1)) = 0.89 − (0.0591/2) log (1/1.5) = 0.895 V
On increasing the concentration of Sn4+, EMF of the cell will increase.

Teacher's Note: E° = 0.13 − (−0.76) = 0.89 V; more reactant lowers Q, so E rises (Le Chatelier).

Exam Note: State E° first, then direction of change.

Question SA-II Q.15 E° (Cu2+/Cu) and E° (Ag+/Ag) is + 0.337 V and + 0.799 V respectively. Make a cell whose EMF is +ve. If the concentration of Cu2+ is 0.01M and Ecell at 25°C is zero, calculate the concentration of Ag+.

Solution. Cu is more reactive than silver, so that the cell is as Cu/Cu2+ (0.01M) || Ag+ (C)/Ag or cell reaction
Cu + 2Ag+ → Cu2+ + 2Ag
Ecell = E°cell − (0.0591/n) log ([Cu2+]/[Ag+]2) = E°cell − (0.0591/2) log (0.01/[Ag+]2)
Setting Ecell = 0 (E° = 0.799 − 0.337 = 0.462 V):
(using 0.059 in place of 0.0591)
[Ag+] = 1.47 × 10-9 M

Teacher's Note: Ecell = 0 means equilibrium, so log Q = 2E°/0.0591 (= 15.6); then solve for [Ag+].

Exam Note: Set Ecell = 0 and solve for [Ag+].

Question SA-II Q.16 Calculate the potential of the cell at 298 K : Cd/Cd2+ (0.1M) || H+ (0.2M)/Pt, H2 (0.5 atm)
Given E° for Cd2+/Cd = − 0.403 V, R = 8.314 J-1 mol-1, F = 96500 C mol-1.

Solution. The cell reaction is Cd + 2H+ (0.2M) → Cd2+ (0.1M) + H2 (0.5 atm)
E°cell = 0 − (− 0.403) = + 0.403 V
Ecell = 0.403 − (2.303RT/nF) log ([Cd2+] × PH2/[H+]2)
= 0.403 − (2.303 × 8.314 × 298/(2 × 96500)) log (0.1 × 0.5/(0.2)2)
Ecell = 0.403 − 0.003 = 0.40 V

Teacher's Note: Q = 0.05/0.04 = 1.25, so the correction is only about 0.003 V.

Exam Note: Put pressure of H2 in the Q term.

Question SA-II Q.17 The electrical resistance of a column of 0.05M NaOH solution of diameter 1 cm and length 50 cm is 5.55 × 103 ohm. Calculate its resistivity, conductivity and molar conductivity.

Solution. Diameter = 1 cm, radius = 0.5 cm; Area = πr2 = 3.14 × (0.5)2 = 0.785 cm2
ρ = R × A/l = (5.55 × 103 × 0.785)/50 = 87.135 ohm cm
Conductivity (k) = 1/ρ = 1/87.135 = 0.01148 ohm-1 cm-1
Molar conductivity Λmc = (k × 1000)/M = (0.01148 × 1000)/0.05 = 229.6 S cm2 mol-1 (final value completed by us; the book stops at the expression)

Teacher's Note: Resistivity uses area × R / length; molar conductivity then follows from k × 1000/M.

Exam Note: Compute area, ρ, k, then Λm.

Question SA-II Q.18 The measured resistance of a conductance cell containing 7.5 × 10-3 M solution of KCl at 25°C was 1005 ohms. Calculate (a) specific conductance, (b) molar conductance of the solution.

Solution. 1.247 × 10-3 S cm-1, 165.83 S cm2 mol-1 (answers as printed; the cell constant is not stated in the book)

Teacher's Note: k = G*/R and Λ = k × 1000/M; needs the cell constant, about 1.25 cm-1.

Exam Note: Quote cell constant used if given.

Question SA-II Q.19 Conductivity of saturated solution of BaSO4 at 315 K is 3.648 × 10-6 ohm-1 cm-1 and that of water is 1.25 × 10-6 ohm-1 cm-1. Ionic conductance of Ba2+ and SO42- are 110 and 136.6 ohm-1 cm2 mol-1 respectively. Calculate the solubility of BaSO4 in g/L.

Solution. Λmo(BaSO4) = ΛmoBa2+ + ΛmoSO42- = 110 + 136.6 = 246.6 ohm-1 cm2 mol-1
KBaSO4 = K(solution) − Kwater = 3.648 × 10-6 − 1.25 × 10-6 = 2.398 × 10-6 S cm-1
Λmc = (K × 1000)/Solubility, so Solubility = (2.398 × 10-6 × 1000)/246.6 = 9.72 × 10-6 mol/L
= 9.72 × 10-6 × 233 = 2.26 × 10-3 g/L

Teacher's Note: Subtract water's conductivity; saturated sparingly soluble salt is at infinite dilution so Λ ≈ Λ°.

Exam Note: Subtract water's conductivity first.

Long Answer Type Questions (5 Marks)

Question LA Q.1 Conductivity of 0.00241M acetic acid is 7.896 × 10-5 S cm-1. Calculate its molar conductivity and if Λmo for acetic acid is 390.5 S cm2 mol-1, what is its dissociation constant ?

Solution. Λm = (k × 1000)/M = (7.896 × 10-5 S cm-1 × 1000 cm3 L-1)/(0.00241 mol L-1) = 32.76 S cm2 mol-1
α = Λm/Λmo = 32.76/390.5 = 8.39 × 10-2
Ka = Cα2/(1 − α) = 0.00241 × (8.39 × 10-2)2/(1 − 8.39 × 10-2) = 1.86 × 10-5

Teacher's Note: Weak electrolyte: α = Λc/Λ°, then Ostwald's Ka = Cα2/(1 − α).

Exam Note: Show α before substituting into Ka.

Question LA Q.2 Three electrolytic cells A, B, C containing solution of ZnSO4, AgNO3 and CuSO4 respectively all connected in series. A steady current of 1.5 amperes was passed through them until 1.45 g of silver deposited at the cathode of cell B. How long did the current flow ? What mass of copper and of zinc were deposited ?

Solution. Ag+ + e- → Ag (s); 108 g of silver is deposited by 96500 C.
1.45 g silver is deposited by (96500 × 1.45)/108 = 1295.6 C
Q = I × t, 1295.6 = 1.5 × t, t = 1295.6/1.5 = 863 s
In cell A, Zn2+ + 2e- → Zn; 2F deposit Zn = 65.3 g; 1295.6 C deposit Zn = (65.3 × 1295.6)/(2 × 96500) = 0.438 g
In cell C, Cu2+ + 2e- → Cu (s); 2F deposit Cu = 63.5 g; 1295.6 C deposit Cu = (63.5 × 1295.6)/(2 × 96500) = 0.426 g

Teacher's Note: Same charge passes through all cells in series; find Q from silver, then apply Faraday to each metal.

Exam Note: Find total charge once from silver.

Question LA Q.3 (a) Define Kohlrausch's law.
(b) Suggest a way to determine the Λmo for CH3COOH.
(c) The Λmo for sodium acetate, HCl, NaCl are 91.0, 425.9 and 126.4 S cm2 mol-1 respectively at 298 K. Calculate Λmo for CH3COOH.

Solution. (a) The molar conductivity at infinite dilution for a given salt can be expressed as the sum of the individual contribution from the ions of electrolyte.
(b) Λ°(CH3COO-) + Λ°(H+) = Λ°(CH3COO-) + Λ°(Na+) + Λ°(H+) + Λ°(Cl-) − Λ°(Na+) − Λ°(Cl-)
Λmo CH3COOH = Λ° CH3COONa + Λ° HCl − Λ° NaCl
(c) Λmo CH3COOH = 91.0 + 425.9 − 126.4 = 390.5 S cm2 mol-1

Teacher's Note: Add sodium acetate and HCl, subtract NaCl, so Na+ and Cl- cancel.

Exam Note: Show cancellation of Na+ and Cl-.

Question LA Q.4 (a) Define weak and strong electrolytes.
(b) The E° values corresponding to the following two reduction electrode processes are : (i) Cu+/Cu = 0.52 V (ii) Cu2+/Cu+ = 0.16 V
Formulate the galvanic cell for their combination. Calculate the cell potential and ΔG° for the cell reaction.

Solution. (a) Weak electrolyte : The substance which partially ionized in solution is known as weak electrolyte. Example : NH4OH.
Strong electrolyte : The substance which completely ionized in solution is known as strong electrolyte. Example : NaCl.
(b) Cu+ + e- → Cu; Cu+ → Cu2+ + e-
Overall cell reaction : 2Cu+ → Cu + Cu2+
Cu+/Cu2+ || Cu+/Cu
E°cell = 0.52 − 0.16 = 0.36 V
ΔG° = − nFE°cell = − 1 × 96500 × 0.36 = − 34740 J mol-1

Teacher's Note: Cu+ disproportionates; the higher E° couple is cathode, the lower one anode.

Exam Note: Cathode E° minus anode E° gives 0.36 V.

Question LA Q.5 (a) Give anode and cathode reaction of mercury cell.
(b) Calculate emf of the cell for the cell reaction at 25°C for the cell : Zn/Zn2+ (0.0004M) || Cd2+ (.2M)/Cd (s)
Given : E°cell = 0.36 V

Solution. (a) At anode : Zn + 2OH- → ZnO + 2e- + H2O
At cathode : HgO (s) + H2O + 2e- → Hg (l) + 2OH-
(b) Zn + Cd2+ → Zn2+ + Cd, n = 2
According to Nernst equation : Ecell = E°cell − (0.059/2) log ([Zn2+]/[Cd2+])
= 0.36 − (0.059/2) log (0.0004/0.2) = 0.36 − (0.059/2) log (2 × 10-3) = 0.36 − (0.059/2)(− 2.6990) = 0.36 + 0.08 = 0.44 V (the book prints the numerator as 0.004, a typo; its result uses 0.0004)

Teacher's Note: Zn2+ in the numerator is small, so log Q is negative and E exceeds E°.

Exam Note: Write Q as [Zn2+]/[Cd2+].

Download Pradeep's KL Gogia Solutions for Class 12 Math PDF

Download Pradeep's KL Gogia Solutions for Class 12

Access the complete chapter-wise PDF for Pradeep's KL Gogia Solutions Class 12 Chemistry Chapter 3 Electro Chemistry Concept. These structured Pradeep's KL Gogia Solutions solutions for Class 12 Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.

Mastering Core Concepts with Pradeep's KL Gogia Solutions

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Complete Your Class 12 Exam Preparation

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these Pradeep's KL Gogia Solutions for Class 12 Chemistry?

They are chapter-wise solved questions from the Pradeep&#039;s KL Gogia book for Class 12 Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the Pradeep's KL Gogia Class 12 Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these Pradeep's KL Gogia solutions for Class 12 Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising Pradeep's KL Gogia Class 12 Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 12 Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.