Xam Idea Solutions Class 12 Chemistry Chapter 2 Solutions Very Short Answer Questions

Solutions for Class 12 Chemistry: Chapter 02 Solutions

Explore reliable textbook solutions for Chapter 02 Solutions tailored for Class 12 learners using methodologies. Utilizing these Chemistry answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.

Practice Class 12 Chemistry Solutions: Chapter 02 Solutions

Access the complete solution PDF for Class 12 Chemistry below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

Very Short Answer Questions

Question 1. Define mole fraction. [CBSE Delhi 2012]

Solution.

. Mole fraction of a component in a solution may be defined as the ratio of moles of that component to the total number of moles of all the components present in the solution.

Teacher's Note: Mole fraction is the moles of a component divided by the total moles of all components.

Exam Note: State the formula in words.

Question 2. What is meant by ‘reverse osmosis’? [CBSE (AI) 2011]

Solution.

If a pressure larger than the osmotic pressure is applied on the solution side, the solvent starts to flow from the solution into the pure solvent through the semipermeable membrane. This phenomenon is called reverse osmosis.

Teacher's Note: Reverse osmosis forces solvent through a membrane from solution to pure solvent under excess pressure.

Exam Note: Mention pressure above osmotic pressure.

Question 3. What is the similarity between Raoult’s law and Henry’s law? [CBSE Delhi 2014]

Solution.

The similarity between Raoult’s law and Henry’s law is that both state that the partial vapour pressure of the volatile component or gas is directly proportional to its mole fraction in the solution.

Teacher's Note: Both laws state that partial vapour pressure is proportional to mole fraction.

Exam Note: State the similarity briefly.

Question 4. Out of two 0.1 molal solutions of glucose and of potassium chloride, which one will have a higher boiling point and why? [CBSE (F) 2013]

Solution.

0.1 molal KCl solution will have higher boiling point as KCl dissociates in the solution

Teacher's Note: Potassium chloride dissociates into ions, giving more particles and a higher boiling point than glucose.

Exam Note: Explain using dissociation.

Question 5. Define van’t Hoff factor. [CBSE Delhi 2012]

Solution.

van’t Hoff factor may be defined as the ratio of normal molecular mass to observed molecular mass or the ratio of observed colligative property to normal colligative property.

Teacher's Note: The van't Hoff factor compares the observed and calculated colligative property, accounting for association or dissociation.

Exam Note: Define it as a ratio.

Question 6. What are isotonic solutions? [CBSE Delhi 2012, 2014]

Solution.

The solutions of the same osmotic pressure at a given temperature are called isotonic solutions.

Teacher's Note: Isotonic solutions have equal osmotic pressure at the same temperature.

Exam Note: Define in one line.

Question 7. How is it that measurement of osmotic pressures is more widely used for determining molar masses of macromolecules than the elevation in boiling point or depression in freezing point of their solutions? [CBSE (AI) 2009]

Solution.

The osmotic pressure method has the advantage over elevation in boiling point or depression in freezing point for determining molar masses of macromolecules because

(i) Osmotic pressure is measured at the room temperature and the molarity of solution is used instead of molality.

(ii) Compared to other colligative properties, its magnitude is large even for very dilute solutions.

Teacher's Note: Osmotic pressure suits macromolecules as it works at room temperature and gives measurable values at low concentration.

Exam Note: Give an advantage over other methods.

Question 8. Give an example of solution containing a solid solute in a solid solvent.

Solution.

Alloys like copper in gold.

Teacher's Note: A solid-in-solid solution is an alloy, such as brass or copper in gold.

Exam Note: Give one example.

Question 9. Is smoke a homogeneous solution? If not, then what is it?

Solution.

No, it is a colloidal solution.

Teacher's Note: Smoke is a colloidal system, not a homogeneous solution.

Exam Note: State it is a colloid.

Question 10. What do you mean by 10% aqueous solution of sodium carbonate?

Solution.

It means that 10 g of Na2CO3 is present in 100 g of the solution

Teacher's Note: A 10 percent solution by mass has a fixed mass of solute in every hundred units of solution.

Exam Note: Explain the meaning.

Question 11. How does the molarity of a solution change with temperature?

Solution.

Molarity decreases with increase in temperature as volume of solution increases with increase in temperature.

Teacher's Note: Molarity falls with rising temperature since the volume of the solution expands.

Exam Note: Link volume with molarity.

Question 12. When and why is molality preferred over molarity in handling solutions in chemistry?

Solution.

. Molality is preferred in studies that involves changes in temperature as in some of the colligative properties of solutions. This is because molality depends on masses of solvent which do not change with temperature.

Teacher's Note: Molality is preferred because it depends on mass, which does not change with temperature.

Exam Note: Mention temperature independence.

Question 13. What do you understand by ‘colligative properties’?

Solution.

Colligative properties are those properties which depend upon the number of moles of solute particle but not on the nature of solute particles.

Teacher's Note: Colligative properties depend on the number of solute particles, not on their identity.

Exam Note: Define in one line.

Question 14. Why is the vapour pressure of a solution of glucose in water lower than that of water? [NCERT Exemplar]

Solution.

This is due to decrease in the escaping tendency of the water molecules from the surface of solution as some of the surface area is occupied by non-volatile solute, glucose particles.

Teacher's Note: Dissolved non-volatile glucose reduces the escape of solvent molecules, lowering vapour pressure.

Exam Note: Explain with surface coverage.

Question 15. State any two characteristics of ideal solutions.

Solution.

Ideal solutions (i) obey Raoult’s Law (ii) Δmix H = 0, Δmix V = 0

Teacher's Note: Ideal solutions follow Raoult's law and show no enthalpy or volume change on mixing.

Exam Note: Name any two characteristics.

Question 16. What type of liquids form ideal solutions?

Solution.

Liquids that have similar structures and polarities form ideal solutions.

Teacher's Note: Liquids with similar structure and polarity form ideal solutions.

Exam Note: State when mixing is ideal.

Question 17. Under what condition do non-ideal solutions show negative deviations?

Solution.

When the new forces of interaction between the components are stronger than those in the pure components, then non-ideal solutions show negative deviations.

Teacher's Note: Negative deviation occurs when new interactions between components are stronger than the original ones.

Exam Note: Compare interaction strengths.

Question 18. What are maximum boiling azeotropes? Give one example.

Solution.

Maximum boiling azeotropes are those which boil at higher temperature than boiling point of each component in pure state, e.g., 68% nitric acid and 32% water by mass.

Teacher's Note: Maximum boiling azeotropes boil above either component's boiling point, as a nitric acid and water mixture does.

Exam Note: Give one example.

Question 19. What are minimum boiling azeotropes? Give one example.

Solution.

Minimum boiling azeotropes are those which boil at lower temperature than boiling point of each component in pure state, e.g., 95.5% ethyl alcohol and 4.5% water by mass.

Teacher's Note: Minimum boiling azeotropes boil below either component, as ethanol with a little water does.

Exam Note: Give one example.

Question 20. Define molal elevation constant or ebullioscopic constant.

Solution.

Molal elevation constant is defined as the elevation in boiling point when one mole of non-volatile solute is added to one kilogram of solvent.

Teacher's Note: The ebullioscopic constant is the boiling point rise for one mole of solute in a kilogram of solvent.

Exam Note: Define with units in words.

Question 21. Define molal depression constant or cryoscopic constant.

Solution.

It is the depression in freezing point when 1 mole of non-volatile solute is dissolved in 1000 g of solvent.

Teacher's Note: The cryoscopic constant is the freezing point fall for one mole of solute per kilogram of solvent.

Exam Note: Define with solvent mass.

Question 22. What do you understand by the term that Kf for water is 1.86 K kg mol–1?

Solution.

It means that the freezing point of water is lowered by 1.86 K when 1 mole of non- volatile solute is dissolved in 1 kg of water.

Teacher's Note: The stated value means one mole of solute in a kilogram of water lowers the freezing point by that amount.

Exam Note: Interpret the value.

Question 23. What is an antifreeze?

Solution.

A substance such as ethylene glycol which is added to water to lower its freezing point is called an antifreeze. It is named so as it delays freezing.

Teacher's Note: An antifreeze is a substance added to water to lower its freezing point, such as ethylene glycol.

Exam Note: Name one antifreeze.

Question 24. What is de-icing agent? How does it work?

Solution.

Common salt is called de-icing agent as it lowers the freezing point of water to such an extent that it does not freeze to form ice. Thus, it is used to clear snow from roads.

Teacher's Note: A de-icing agent such as common salt lowers the freezing point, so ice melts on roads.

Exam Note: Mention its use on roads.

Question 25. What is ‘reverse osmosis’?

Solution.

If the pressure applied on the solution is greater than the osmotic pressure then the solvent molecules start to move from solution into solvent through semipermeable membrane. This process is called reverse osmosis.

Teacher's Note: Reverse osmosis applies pressure above the osmotic pressure so solvent moves out of the solution.

Exam Note: Compare with ordinary osmosis.

Question 26. State how does osmotic pressure vary with temperature.

Solution.

Osmotic pressure increases with increase in temperature.

Teacher's Note: Osmotic pressure is proportional to temperature, so it rises when temperature increases.

Exam Note: State direct variation.

Question 27. Why is osmotic pressure of 1 M KCl higher than 1 M urea solution?

Solution.

This is because KCl dissociates to give K+ and Cl– ions while urea being a molecular solid does not dissociate into ions in the solution.

Teacher's Note: Potassium chloride gives two ions per formula unit, whereas urea stays as molecules.

Exam Note: Explain using ion numbers.

Question 28. Why is glycol and water mixture used in car radiators in cold countries? [HOTS]

Solution.

Ethylene glycol lowers the freezing point of water. Due to this, coolant in radiators will not freeze. Otherwise, radiator will burst due to freezing of coolant (water).

Teacher's Note: Glycol lowers the freezing point of water, so the radiator coolant does not freeze and burst the radiator.

Exam Note: Mention freezing and bursting.

Question 29. Why are the aquatic species more comfortable in cold water in comparison to warm water? [HOTS]

Solution.

At a given pressure the solubility of oxygen in water increases with decrease in temperature. Presence of more oxygen at lower temperature makes the aquatic species more comfortable in cold water.

Teacher's Note: Oxygen dissolves more in cold water, so aquatic animals find it more comfortable.

Exam Note: Link temperature with oxygen solubility.

Question 30. Why does the use of pressure cooker reduce cooking time? [HOTS]

Solution.

The weight over the lid does not allow the steam to go out. As a result, pressure inside the cooker becomes high. Higher the pressure, higher is the boiling point and faster is the cooking.

Teacher's Note: A pressure cooker raises the pressure, so water boils at a higher temperature and food cooks faster.

Exam Note: Link pressure with boiling point.

Question 31. What is the van’t Hoff factor for a compound which undergo dimerisation in an organic solvent?

Solution.

2X → X₂

i = (number of moles of particles after association) / (number of moles of particles before association) = 1/2 = 0.5

Teacher's Note: On dimerisation two molecules become one, so the particle count halves and the factor is 0.5.

Exam Note: Association gives i below one.

Question 32. What would be the value of van’t Hoff factor for a dilute solution of K₂SO₄ in water?

Solution.

In dilute solution, K₂SO₄ → 2K⁺ + SO₄²⁻

van’t Hoff factor, i = (number of moles of particles after dissociation) / (number of moles of particles before dissociation) = 3/1 = 3

Teacher's Note: Each formula unit gives two potassium ions and one sulphate ion, so three particles form.

Exam Note: Count ions on complete dissociation.

Question 33. The dissolution of ammonium chloride in water is an endothermic process but still it dissolves in water readily. Why? [HOTS]

Solution.

This is because of entropy change. In this case, ΔS is +ve.

NH₄Cl(aq) → NH₄⁺(aq) + Cl⁻(aq)

The ions that were held together in crystalline solid are free and moving in all possible directions. Its entropy has increased and this makes TΔS > ΔH, i.e., ΔG = –ve.

Teacher's Note: Freed ions move randomly, so entropy rises enough for TΔS to exceed ΔH and ΔG turns negative.

Exam Note: Quote ΔG = ΔH − TΔS.

Question 34. Which of the following solutions will have the highest boiling point: (i) 1 M BaCl₂ (ii) 1 M Urea (iii) 1 M FeCl₃ (iv) 1 M NaCl. [HOTS]

Solution.

FeCl₃ solution (Tb = Tb° + ΔTb)

As number of ions produced is maximum in FeCl₃ solution. The colligative property ΔTb will be maximum in case of FeCl₃.

Teacher's Note: FeCl₃ gives four ions, BaCl₂ three, NaCl two and urea one, so FeCl₃ raises the boiling point most.

Exam Note: Compare ions produced per formula unit.

Question 35. Which one of these has the highest freezing point? (i) 1 M glucose (ii) 1 M NaCl (iii) 1 M CaCl₂. [HOTS]

Solution.

1 M glucose solution has the highest freezing point because it has lowest ΔTf (Tf = Tf° − ΔTf).

Teacher's Note: Glucose does not ionise, so its freezing point depression is smallest and its freezing point stays highest.

Exam Note: Pick the non-electrolyte.

Question 36. What will happen to freezing point of a potassium iodide aqueous solution when mercuric iodide is added to solution? [HOTS]

Solution.

HgI₂ + 2KI → K₂HgI₄

Mercuric iodide forms a complex with potassium iodide, therefore, the number of solute particles (KI) in the solution decreases resulting in the decrease in the value of ΔTf, i.e., depression in the freezing point. As a result, the freezing point of the solution will increase.

Teacher's Note: Complex formation removes ions from solution, so freezing point depression falls and the freezing point rises.

Exam Note: State the complex formed and the result.

Xam Idea Solutions for Class 12 Mathematics: Xam Idea Solutions Class 12 Chemistry Chapter 2 Solutions Very Short Answer Questions

Chapter-wise Xam Idea Solutions: Xam Idea Solutions Class 12 Chemistry Chapter 2 Solutions Very Short Answer Questions

Explore reliable mathematical solutions for Xam Idea Solutions Class 12 Chemistry Chapter 2 Solutions Very Short Answer Questions tailored for Class 12 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.

Concept-Driven Math Answers

Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.

Complete Your Class 12 Exam Preparation

In addition to these Xam Idea Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.

FAQs

What are these [current-page:node:field_author] Solutions for Class 12 Chemistry?

They are chapter-wise solved questions from the book for Class 12 Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 12 Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 12 Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 12 Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 12 Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.