Step-by-Step Solutions for Class 12 Chemistry Chapter 03 Electrochemistry
Review structured textbook solutions for Class 12 Chemistry Chapter 03 Electrochemistry prepared by . Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.
Download Chapter 03 Electrochemistry Textbook Solutions PDF
Access the complete solution PDF for Class 12 Chemistry below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.
Short Answer Questions-I (PIQ)
Question 1. For the given cells: Lead storage cell, Mercury cell, Fuel cell and Dry cell Answer the following: i. Which cell is used in hearing aids? ii. Which cell was used in Apollo space programme? iii. Which cell is used in automobiles and inverters? iv. Which cell does not have long life? [CBSE Delhi 2016; South 2016]
Solution.
i. Mercury cell ii. Fuel cell iii. Lead storage cell iv. Dry cell
Teacher's Note: Hearing aids use the mercury cell, while the dry cell has a short life.
Exam Note: Match each cell to its use.
Question 2. What is the effect of catalyst on: [CBSE Delhi 2017]
Gibbs energy (∆G) and
Solution.
No effect
Q. Activation Rnergy of a Reaction?
Ans. Decreases
Teacher's Note: A catalyst does not alter the energy change but lowers the activation energy.
Exam Note: Contrast the two effects.
Question 3. Define the following terms: (a) Molar conductivity (Λm) (b) Secondary batteries
Solution.
Molar conductivity, Λm of a solution at a dilution V is defined as the conductance of all the ions produced from one gram mole of the electrolyte dissolved in V cm3 of the solution when the electrodes are one centimetre apart and the area of the electrodes is so large that the whole of the solution is contained between them. Λm = κ × 1000 / M (M = molarity), or Λm = κV where κ is the conductivity and V is the volume of the solution containing 1 mole of the electrolyte.
Secondary batteries are those batteries which can be recharged by passing electric current through them and hence can be used over again, e.g., lead storage battery.
Teacher's Note: Molar conductivity is conductivity times the volume holding one mole; secondary batteries are rechargeable.
Exam Note: Define both with an example.
Question 4. Express the relation among cell constant, resistance of the solution in the cell and conductivity of the solution. How is molar conductivity of a solution related to its conductivity?
Solution.
Cell constant (G*) = resistance (R) × conductivity (κ), i.e., κ = G*/R.
Molar conductivity Λm = κ × 1000 / c, where c is the molar concentration (mol L−1); Λm is in S cm2 mol−1.
Teacher's Note: Conductivity equals cell constant divided by resistance; molar conductivity is conductivity times 1000 over molarity.
Exam Note: Write both relations with units.
Question 5. State Kohlrausch law of independent migration of ions. Why does the conductivity of a solution decrease with dilution?
Solution.
Kohlrausch law states that the limiting molar conductivity of an electrolyte can be represented as the sum of the individual contributions of cation and anion of the electrolyte.
In general, if an electrolyte on dissociation gives ν+ cations and ν− anions then its limiting molar conductivity is given by Λ°m = ν+λ°+ + ν−λ°−, where λ°+ and λ°− are the limiting molar conductivities of cations and anions respectively.
Conductivity of a solution decreases with dilution. This is due to the fact that the number of ions per unit volume that carry the current in a solution decreases with dilution.
Teacher's Note: Each ion contributes independently at infinite dilution; dilution reduces ions per unit volume.
Exam Note: State the law with formula; mention fewer ions.
Question 6. Define the following terms: (a) Fuel cell (b) Limiting molar conductivity
Solution.
A fuel cell is a device which converts the energy produced during the combustion of fuels like hydrogen, methanol, methane etc. directly into electrical energy. One of the most successful fuel cells is the H2–O2 fuel cell.
When concentration approaches zero, the molar conductivity is known as limiting molar conductivity. It is represented by Λ°m.
Teacher's Note: A fuel cell gives electricity directly from fuel combustion; limiting molar conductivity is at zero concentration.
Exam Note: Define both in one line each.
Question 7. Write the name of the cell which is generally used in hearing aids. Write the reactions taking place at the anode and the cathode of this cell.
Solution.
The mercury cell is used in hearing aids.
Anode: Zn(Hg) + 2OH− → ZnO(s) + H2O + 2e−
Cathode: HgO(s) + H2O + 2e− → Hg(l) + 2OH−
Teacher's Note: Mercury cell gives a steady potential and is small, so it suits hearing aids.
Exam Note: Name mercury cell with both electrode reactions.
Question 8. Following reactions occur at cathode during the electrolysis of aqueous silver chloride solution: Ag+(aq) + e− → Ag(s), E° = +0.80 V; H+(aq) + e− → ½H2(g), E° = 0.00 V. On the basis of their standard reduction electrode potential (E°) values, which reaction is feasible at the cathode and why? Also, define limiting molar conductivity and explain why conductivity of an electrolyte solution decreases with the decrease in concentration.
Solution.
The reaction Ag+(aq) + e− → Ag(s) is feasible at the cathode as the cathodic reaction is the one which has higher standard reduction electrode potential (E°red).
The value of molar conductivity when the concentration approaches zero is known as limiting molar conductivity. Conductivity of an electrolytic solution decreases with decrease in concentration as the number of ions per unit volume that carry the current in the solution decreases with decrease in concentration.
Teacher's Note: The species with the higher reduction potential is reduced first at the cathode.
Exam Note: Choose the higher E°; fewer ions on dilution.
Question 9. Following reactions occur at cathode during the electrolysis of aqueous sodium chloride solution: Na+(aq) + e− → Na(s), E° = −2.71 V; H+(aq) + e− → ½H2(g), E° = 0.00 V. On the basis of their standard reduction electrode potential (E°) values, which reaction is feasible at the cathode and why? Also, why does the cell potential of mercury cell remain constant throughout its life?
Solution.
The reaction H+(aq) + e− → ½H2(g) is feasible at the cathode as it has higher standard reduction potential than the other reaction.
The cell potential of a mercury cell remains constant as the overall reaction does not involve any ion in the solution whose concentration changes during its life period.
Teacher's Note: Hydrogen has the higher reduction potential, so it is discharged instead of sodium.
Exam Note: H+ reduced; no ion concentration changes.
Question 10. Calculate the time to deposit 1.27 g of copper at cathode when a current of 2 A was passed through the solution of CuSO4 (Molar mass of Cu = 63.5 g mol−1, 1 F = 96500 C mol−1).
Solution.
Cu2+ + 2e− → Cu
63.5 g of copper is deposited by 2 × 96500 C.
∴ 1.27 g of copper will be deposited by (2 × 96500 × 1.27)/63.5 C = 3860 C
I = 2 A, Q = 3860 C, ∴ t = Q/I = 3860/2 = 1930 s
Teacher's Note: Charge needed is 2F per mole of copper; time is charge divided by current.
Exam Note: Q = nF first, then t = Q/I.
Question 11. Two half-reactions of an electrochemical cell are given below: MnO4−(aq) + 8H+(aq) + 5e− → Mn2+(aq) + 4H2O(l); E° = +1.51 V and Sn2+(aq) → Sn4+(aq) + 2e−; E°(Sn4+/Sn2+) = +0.15 V. Construct the redox equation from the standard potential of the cell and predict if the reaction is reactant favoured or product favoured.
Solution.
At anode: [Sn2+(aq) → Sn4+(aq) + 2e−] × 5
At cathode: [MnO4−(aq) + 8H+(aq) + 5e− → Mn2+(aq) + 4H2O(l)] × 2
Cell reaction: 2MnO4−(aq) + 5Sn2+(aq) + 16H+(aq) → 2Mn2+(aq) + 5Sn4+(aq) + 8H2O(l)
E°cell = 1.51 − 0.15 = +1.36 V
As cell potential is positive therefore the reaction is product favoured.
Teacher's Note: Positive standard cell potential means the forward reaction is spontaneous and product favoured.
Exam Note: Balance electrons (2 and 5); E°cell positive.
Question 12. A solution of Ni(NO3)2 is electrolysed between platinum electrodes using a current of 5.0 ampere for 20 minutes. What mass of nickel will be deposited at the cathode? (Given: At. Mass of Ni = 58.7 g mol−1, 1 F = 96500 C mol−1)
Solution.
Ni2+ + 2e− → Ni
Q = I × t = 5.0 A × 20 × 60 s = 6000 C
2 × 96500 C deposit 58.7 g of Ni, so 6000 C deposit (58.7 × 6000)/(2 × 96500) = 1.825 g (about 1.83 g).
Teacher's Note: Charge is current times time; mass follows from Faraday's law.
Exam Note: Find Q, then mass = M Q / nF.
Question 13. Determine the values of equilibrium constant (Kc) and ΔG° for the following reaction: Ni(s) + 2Ag+(aq) → Ni2+(aq) + 2Ag(s), E° = 1.05 V (1 F = 96500 C mol−1)
Solution.
n = 2
ΔG° = −nFE° = −2 × 96500 C mol−1 × 1.05 V = −202650 J mol−1 = −202.65 kJ mol−1
log Kc = nE°/0.059 = (2 × 1.05)/0.059 = 35.59
Kc = antilog (35.59) ≈ 3.9 × 1035
Teacher's Note: Use delta G = −nFE° and log K = nE°/0.059 at 298 K.
Exam Note: Apply both formulas with n = 2.
Question 14. The molar conductivity of a 1.5 M solution of an electrolyte is found to be 138.9 S cm2 mol−1. Calculate the conductivity of this solution.
Solution.
Λm = κ × 1000/c
κ = (Λm × c)/1000 = (138.9 × 1.5)/1000 = 0.208 S cm−1
Teacher's Note: Rearrange the molar conductivity formula to get conductivity.
Exam Note: κ = Λm c / 1000.
Question 15. The conductivity of 0.20 M solution of KCl at 298 K is 0.025 S cm−1. Calculate its molar conductivity.
Solution.
Λm = κ × 1000/c = (0.025 × 1000)/0.20 = 125 S cm2 mol−1
Teacher's Note: Multiply conductivity by 1000 and divide by molar concentration.
Exam Note: Answer: 125 S cm² mol⁻¹.
Question 16. The standard electrode potential (E°) for Daniell cell is +1.1 V. Calculate the ΔG° for the reaction Zn(s) + Cu2+(aq) → Zn2+(aq) + Cu(s) (1 F = 96500 C mol−1).
Solution.
n = 2
ΔG° = −nFE° = −2 × 96500 × 1.1 = −212300 J mol−1 = −212.3 kJ mol−1
Teacher's Note: Negative delta G confirms the Daniell cell reaction is spontaneous.
Exam Note: ΔG° = −nFE°.
Question 17. The chemistry of corrosion of iron is essentially an electrochemical phenomenon. Explain the reactions occurring during the corrosion of iron in the atmosphere.
Solution.
According to electrochemical theory of rusting the impure iron surface behaves like a small electrochemical cell in the presence of water containing dissolved oxygen or carbon dioxide. In this cell pure iron acts as anode and impure iron surface acts as cathode. Moisture having dissolved CO2 or O2 acts as an electrolyte. The reactions are given below.
Anode: 2Fe(s) → 2Fe2+ + 4e−
Cathode: O2(g) + 4H+(aq) + 4e− → 2H2O(l)
Overall: 2Fe(s) + O2(g) + 4H+(aq) → 2Fe2+(aq) + 2H2O(l)
The Fe2+ ions are further oxidised by atmospheric oxygen to Fe3+ ions, which come out in the form of hydrated ferric oxide (rust), Fe2O3·xH2O.
Teacher's Note: Impure iron forms tiny cells: iron is oxidised and oxygen is reduced, giving rust.
Exam Note: Write anode, cathode, overall and rust formula.
Question 18. Calculate the degree of dissociation (α) of acetic acid if its molar conductivity (Λm) is 39.05 S cm2 mol−1. [Given: λ°(H+) = 349.6 S cm2 mol−1, λ°(CH3COO−) = 40.9 S cm2 mol−1]
Solution.
Λ°m(CH3COOH) = 349.6 + 40.9 = 390.5 S cm2 mol−1
α = Λm/Λ°m = 39.05/390.5 = 0.1 (10%)
Teacher's Note: Degree of dissociation is molar conductivity divided by its limiting value.
Exam Note: α = Λm / Λ°m.
Free study material for Chemistry
Xam Idea Solutions for Class 12 Mathematics: Xam Idea Solutions Class 12 Chemistry Chapter 3 Electrochemistry Short Answer Questions-I (PIQ)
Download Xam Idea Solutions for Class 12
Access the complete chapter-wise PDF for Xam Idea Solutions Class 12 Chemistry Chapter 3 Electrochemistry Short Answer Questions-I (PIQ). These structured Xam Idea Solutions solutions for Class 12 Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.
Detailed Calculation Guides for Class 12
Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.
Complete Your Class 12 Exam Preparation
In addition to these Xam Idea Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.
FAQs
They are chapter-wise solved questions from the book for Class 12 Chemistry. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.