Xam Idea Solutions Class 12 Chemistry Chapter 3 Electrochemistry Very Short Answer Questions

Official Textbook Solutions: Class 12 Chemistry Chapter 03 Electrochemistry

Access comprehensive textbook solutions for Chapter 03 Electrochemistry using the reference material for Class 12 Chemistry. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.

Chapter-wise Solutions for Chemistry: Chapter 03 Electrochemistry

Access the complete solution PDF for Class 12 Chemistry below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

Very Short Answer Questions

Question 1. What is primary cell? Give an example. [CBSE Delhi 2008]

Solution.

A primary cell is one in which the redox reaction occurs only once and the cell becomes dead after some time and cannot be used again, e.g., dry cell.

Teacher's Note: A primary cell runs its redox reaction once and cannot be recharged, such as the dry cell.

Exam Note: Define non-rechargeable and give an example like Leclanche cell or mercury cell.

Question 2. What is meant by cell constant?

Solution.

Cell constant is the ratio of distance (l) between electrodes and area of cross- 𝑙 𝐴. Its unit is cm–1. section (A). It is denoted by

Teacher's Note: Cell constant links measured resistance to conductivity and depends on electrode spacing and area.

Exam Note: Write l/A with its unit, cm^-1 or m^-1.

Question 3. Define specific conductance or conductivity.

Solution.

Specific conductance is defined as conductance of electrolyte when distance between electrodes is 1 cm and area of cross section is 1 cm2.

Teacher's Note: Specific conductance is the conductance of a defined unit-volume column of electrolyte between parallel electrodes.

Exam Note: Give the unit-length, unit-area definition and the unit S cm^-1.

Question 4. Why on dilution the increases drastically while that of CH3COONa increases gradually? [NCERT Exemplar]

Solution.

In the case of CH3COOH, which is a weak electrolyte, the number of ions increase on dilution due to an increase in degree of dissociation.

CH3COOH + H2O → CH3COO– + H3O+

Teacher's Note: A weak electrolyte ionises more on dilution, so its molar conductivity rises sharply; a strong one is already ionised.

Exam Note: Contrast weak and strong electrolytes; ions increase on dilution.

Question 5. Why is alternating current used for measuring resistance of an electrolytic solution? [NCERT Exemplar]

Solution.

Alternating current is used to prevent electrolysis so that concentration of ions in the solution remains constant.

Teacher's Note: Alternating current prevents electrolysis and keeps ion concentration steady during resistance measurement.

Exam Note: Mention that DC would cause electrolysis and change concentration.

Question 6. Why electrolysis of NaBr and NaI gives Br2 and I2 respectively while that of NaF gives O2 instead of F2?

Solution.

Br– and I– ions have higher oxidation potentials than water. Hence, they are more easily oxidised. But F– ions have lower oxidation potential than H2O. So, H2O is easily oxidised to give O2 gas.

Teacher's Note: Bromide and iodide are oxidised more easily than water, but fluoride is not, so water gets oxidised.

Exam Note: Compare oxidation potentials of the halide ions and water.

Question 7. Why does an aqueous solution of NaCl on electrolysis give H2 gas at the cathode and not sodium metal?

Solution.

This is because of the fact that standard reduction potential of water is greater than that of sodium.

Teacher's Note: Water has a more favourable reduction potential than sodium ions, so hydrogen forms at the cathode.

Exam Note: Mention reduction potentials of water versus Na+.

Question 8. What are the products of electrolysis of molten and aqueous sodium chloride?

Solution.

(i) Na and Cl2 (ii) H2 and Cl2.

Teacher's Note: Molten and aqueous salt electrolysis give different products because water takes part in the aqueous case.

Exam Note: Write products for both cases separately.

Question 9. Consider a cell given below: Cu | Cu2+ | | Cl– | Cl2, Pt Write the reactions that occur at anode and cathode. [NCERT Exemplar]

Solution.

Anode: Cu → Cu2+ + 2e–

Cathode: Cl2 + 2e– → 2Cl–

Teacher's Note: At the anode oxidation occurs and at the cathode reduction; write the half-reactions for the given cell.

Exam Note: Show electron loss at anode and gain at cathode, balanced with charge.

Question 10. What is the necessity to use a salt bridge in a Galvanic cell?

Solution.

To complete the inner circuit and to maintain the electrical neutrality of the electrolytic solutions of the half-cells we use a salt bridge in a Galvanic cell.

Teacher's Note: The salt bridge completes the circuit and keeps both half-cells electrically neutral.

Exam Note: State two functions: completes the circuit and maintains electrical neutrality.

Question 11. What is the reference electrode in determining the standard electrode potential?

Solution.

Normal hydrogen electrode (NHE).

Teacher's Note: Standard electrode potentials are measured against the normal hydrogen electrode assigned zero.

Exam Note: Write normal or standard hydrogen electrode with its zero value.

Question 12. State the factors that influence the value of cell potential of the following cell: Mg(s) | Mg2+ (aq) | | Ag+(aq) | Ag(s)

Solution.

Concentration of Mg 2+ and Ag+ ions in the solution and temperature.

Teacher's Note: Cell potential varies with ion concentrations and temperature as per the Nernst equation.

Exam Note: List concentrations of ions and temperature.

Question 13. Define electrochemical series.

Solution.

The arrangement of elements in the increasing or decreasing order of their standard reduction potentials is called electrochemical series.

Teacher's Note: The electrochemical series ranks elements according to their standard electrode potentials.

Exam Note: Define by arrangement in order of standard reduction potential values.

Question 14. What flows in the internal circuit of a galvanic cell?

Solution.

Ions.

Teacher's Note: Ions carry charge through the solution while electrons flow in the external wire.

Exam Note: Write ions, in the internal circuit.

Question 15. In operation of a galvanic cell, at one of the electrodes oxidation takes place. What is the name of this electrode and what is its polarity?

Solution.

Anode is the electrode at which oxidation, i.e., loss of electron takes place. It is – ve terminal.

Teacher's Note: Oxidation occurs at the anode, where electrons are lost.

Exam Note: Name anode and say oxidation means loss of electrons.

Question 16. Why is it not possible to measure the single electrode potential?

Solution.

Oxidation or reduction cannot take place alone. Moreover, electrode potential is a relative tendency and can be measured with respect to a reference electrode only.

Teacher's Note: A half-cell cannot operate alone, so its absolute potential cannot be measured.

Exam Note: Note half-reactions occur together; potential is measured only relatively.

Question 17. Why does a galvanic cell become dead after some time?

Solution.

As the reaction proceeds, concentration of ions in anodic half keeps on increasing while in the cathodic half it keeps on decreasing. Hence, their electrode potentials also keep on changing till ultimately they become equal and then e.m.f. of the cell becomes zero.

Teacher's Note: The cell stops when ion concentrations change until the reaction reaches equilibrium and the potential falls to zero.

Exam Note: Mention concentration change and EMF falling to zero.

Question 18. Can for cell reaction ever be equal to zero? [NCERT Exemplar]

Solution.

No.

Teacher's Note: Cell potential at equilibrium is zero, but a working cell reaction has a nonzero value.

Exam Note: Give the answer and the reason related to equilibrium state.

Question 19. Why does a dry cell become dead after a long time even if it has not been used?

Solution.

Even though not in use, a dry cell becomes dead after some time because the acidic NH4Cl corrodes the zinc container.

Teacher's Note: A dry cell runs down unused because the acidic ammonium chloride slowly attacks the zinc container.

Exam Note: Mention that the zinc casing reacts with the acidic electrolyte slowly.

Question 20. What is the role of ZnCl2 in a dry cell?

Solution.

ZnCl2 combines with the NH3 produced to form the complex salt [Zn(NH3)2 Cl2] otherwise the pressure developed due to NH3 would crack the seal of the cell.

Teacher's Note: Zinc chloride binds the ammonia formed at the cathode, so a complex forms and gas buildup is avoided.

Exam Note: Mention formation of complex salt with ammonia.

Question 21. Unlike dry cell, the mercury cell has a constant cell potential throughout its useful life. Why? [NCERT Exemplar]

Solution.

Ions are not involved in the overall cell reaction of mercury cells.

Teacher's Note: The mercury cell keeps a constant potential because the overall reaction involves no change in ion concentration.

Exam Note: State that ions are not consumed or formed in the overall reaction.

Question 22. Write the name of the electrolyte used in (i) fuel cell (ii) mercury cell.

Solution.

(i) Concentrated aqueous KOH solution.

(ii) Moist mercuric oxide (HgO) mixed with KOH.

Teacher's Note: The two cells use different electrolytes.

Exam Note: Write KOH solution for fuel cell and HgO paste for mercury cell.

Question 23. Write the chemical formula of rust.

Solution.

Fe2O3. xH2O

Teacher's Note: Rust is hydrated iron(III) oxide.

Exam Note: Write the formula with water of hydration.

Question 24. What is galvanization?

Solution.

The process of coating zinc over iron is called galvanization.

Teacher's Note: Galvanisation protects iron by coating with a more reactive metal.

Exam Note: Write zinc coating over iron.

Question 25. What is cathodic protection?

Solution.

A process in which a metal is connected with a more reactive metal which acts as anode and the metal to be protected acts as a cathode is known as cathodic protection.

Teacher's Note: In cathodic protection, a more reactive metal is connected to the iron and corrodes instead of it.

Exam Note: Define using the sacrificial metal idea.

Question 26. Which type of a metal can be used in cathodic protection of iron against rusting?

Solution.

A metal which is more electropositive than iron such as Al, Zn, Mg can be used in cathodic protection of iron against rusting.

Teacher's Note: A metal more reactive than iron serves as the sacrificial anode.

Exam Note: Name Al, Zn or Mg.

Question 27. Value of standard electrode potential for the oxidation of Cl– ions is more positive than that of water, even then in the electrolysis of aqueous sodium chloride, why is Cl– oxidised at anode instead of water? [NCERT Exemplar]

Solution.

On electrolysis of aqueous sodium chloride, oxidation of water at anode requires over potential hence Cl– is oxidised instead of water.

Teacher's Note: Despite the potential values, oxidation of water at the anode occurs because of overpotential for chlorine, but chlorine still forms.

Exam Note: Mention overpotential of oxygen as the reason chloride is oxidised in practice.

Question 28. Depict the galvanic cell in which the cell reaction is Cu + 2Ag+ → 2Ag + Cu2+. [NCERT Exemplar] [HOTS]

Solution.

Cu | Cu2+(conc.) | | Ag+(conc.) | Ag

Teacher's Note: The cell notation follows oxidation at left and reduction at right with a salt bridge between.

Exam Note: Write anode on left, cathode on right, separated by double line.

Question 29. How will the pH of brine (aq. NaCl solution) be affected when it is electrolysed? [NCERT Exemplar] [HOTS]

Solution.

The pH of the solution will increase as NaOH is formed in the electrolytic cell.

Teacher's Note: Electrolysing brine produces hydroxide ions at the cathode, so the solution becomes more basic.

Exam Note: Say pH rises due to NaOH formation.

Question 30. Three iron sheets have been coated separately with three metals A, B and C whose standard electrode potentials are given below. Metal A Iron Eo – 0.46 V – 0.66 V – 0.20 V – 0.44 V Identify in which case rusting will take place faster when coating is damaged. [HOTS]

Solution.

As iron (– 0.44 V) has lower standard reduction potential than C (– 0.20 V) only therefore when coating is broken, rusting will take place faster.

Teacher's Note: Coating protects iron only if the coating metal is more reactive than iron, judged by electrode potentials.

Exam Note: Compare each coating metal's potential with iron's and pick suitable coatings.

Question 31. How much charge is required for the reduction of 1 mol of Zn2+ to Zn?

Solution.

Zn2+ + 2e− → Zn

Quantity of charge required for the reduction of one mole of Zn2+ = 2F = 2 × 96500 C = 193000 C

Teacher's Note: Two moles of electrons are needed per mole of zinc ions.

Exam Note: Charge = nF = 2 F.

Question 32. How much charge in Faradays is required for the reduction of 1 mol of Al3+ to Al?

Solution.

Al3+ + 3e− → Al

Quantity of charge required for reduction of 1 mol of Al3+ = 3F = 3 × 96500 C = 289500 C

Teacher's Note: Three moles of electrons are needed per mole of aluminium ions.

Exam Note: Answer: 3 faradays.

Question 33. What is meant by ‘limiting molar conductivity’?

Solution.

When concentration of an electrolyte approaches zero, the molar conductivity is known as limiting molar conductivity. It is represented by Λ°m.

Teacher's Note: It is the molar conductivity at infinite dilution, when ions do not interact.

Exam Note: Molar conductivity as concentration tends to zero.

Question 34. How is the unit of molar conductivity arrived at?

Solution.

Λm = κ × 1000 / c, where κ is in S cm−1 and c in mol L−1 (1000 cm3 = 1 L).

Unit of Λm = (S cm−1 × cm3 L−1) / (mol L−1) = S cm2 mol−1

Teacher's Note: Substituting units in conductivity times 1000 over concentration gives S cm squared per mole.

Exam Note: Unit: S cm² mol⁻¹.

Question 35. Write the equation showing the relationship between equivalent or molar conductance and concentration of a strong electrolyte.

Solution.

Debye-Hückel-Onsager equation: Λm = Λ°m − b√c, where Λm is the molar conductance at concentration c, b is a constant and Λ°m is the conductance at infinite dilution.

Teacher's Note: For strong electrolytes molar conductivity falls linearly with the square root of concentration.

Exam Note: Write Λm = Λ°m − b√c.

Question 36. Write the mathematical expression for Kohlrausch’s law.

Solution.

Λ°m = νcλ°c + νaλ°a, where νc and νa are the number of cations and anions respectively in one formula unit of the compound, and λ°c, λ°a are the limiting molar conductivities of the cation and anion.

Teacher's Note: Limiting molar conductivity is the sum of the independent contributions of cation and anion.

Exam Note: Write the sum with stoichiometric numbers.

Question 37. What does the negative sign in the expression E°(Zn2+/Zn) = −0.76 V mean?

Solution.

It means that Zn is more reactive than hydrogen. When zinc electrode will be connected to SHE, Zn will get oxidised and H+ will get reduced.

Teacher's Note: Negative reduction potential means the metal loses electrons more readily than hydrogen does.

Exam Note: Zinc is oxidised against SHE.

Question 38. What would happen if no salt bridge were used in an electrochemical cell (like Zn–Cu cell)?

Solution.

The metal ions (Zn2+) formed by the loss of electrons will accumulate in one electrode and the negative ions (SO42−) will accumulate in the other. Thus, the solutions will develop charges and the current will stop flowing. Moreover, the inner circuit will not be completed.

Teacher's Note: The salt bridge keeps both solutions electrically neutral and completes the circuit.

Exam Note: Charge builds up; current stops.

Question 39. What does the negative value of E°cell indicate?

Solution.

Negative E°cell value means ΔrG° will be positive, and the cell will not work.

Teacher's Note: Since delta G = −nFE, a negative E° gives a positive delta G, so no spontaneous reaction.

Exam Note: Negative E°: non-spontaneous, cell will not work.

Question 40. Write Nernst equation for single electrode potential.

Solution.

For the electrode reaction Mn+ + ne− → M,

E(Mn+/M) = E°(Mn+/M) − (2.303RT/nF) log (1/[Mn+]) = E°(Mn+/M) − (2.303RT/nF) log [M]/[Mn+]

Teacher's Note: Electrode potential depends on the standard potential and the metal ion concentration.

Exam Note: Include E°, n and ion concentration.

Question 41. Write Nernst equation for the general cell reaction aA + bB → xX + yY.

Solution.

If n moles of electrons are transferred, Nernst equation is

Ecell = E°cell − (RT/nF) ln ([X]x[Y]y / [A]a[B]b) = E°cell − (0.059/n) log ([X]x[Y]y / [A]a[B]b) at 298 K

Teacher's Note: Cell potential falls as the reaction quotient rises, and equals E° at unit concentrations.

Exam Note: Use log of products over reactants.

Question 42. How can the reduction potential of an electrode be increased?

Solution.

For Mn+ + ne− → M, E(Mn+/M) = E° − (RT/nF) ln (1/[Mn+]) = E° + (RT/nF) ln [Mn+]

Thus, electrode potential can be increased by increasing the metal ion concentration.

Teacher's Note: Higher metal ion concentration raises the reduction potential.

Exam Note: Increase concentration of metal ions.

Question 43. Write Nernst equation for the reaction 2Cr + 3Fe2+ → 2Cr3+ + 3Fe

Solution.

Here n = 6.

Ecell = E°cell − (RT/6F) ln ([Cr3+]2 / [Fe2+]3) = E°cell − (0.059/6) log ([Cr3+]2 / [Fe2+]3) at 298 K

Teacher's Note: Two chromium atoms lose six electrons in all, so n is 6.

Exam Note: Take n = 6; solids are omitted.

Question 44. Write the Nernst equation for the cell reaction in the Daniel cell. How will the Ecell be affected when concentration of Zn2+ ions is increased?

Solution.

Zn + Cu2+ → Zn2+ + Cu

Ecell = E°cell − (0.059/2) log ([Zn2+]/[Cu2+])

Ecell decreases when concentration of Zn2+ ions, [Zn2+], increases.

Teacher's Note: Raising product concentration raises the log term, so the cell potential falls.

Exam Note: Ecell decreases.

Question 45. What are secondary cells?

Solution.

Secondary cells are those cells which are rechargeable, i.e., the products can be changed back to reactants.

Teacher's Note: They can be recharged by passing current in the reverse direction, e.g. lead storage battery.

Exam Note: Rechargeable cells; give example.

Question 46. What is the overall electrochemical reaction taking place in rusting?

Solution.

2Fe(s) + O2(g) + 4H+(aq) → 2Fe2+(aq) + 2H2O(l)

Teacher's Note: Iron is oxidised and dissolved oxygen is reduced in the presence of moisture and acid.

Exam Note: Write the balanced equation.

Download Xam Idea Solutions for Class 12 Math PDF

Chapter-wise Xam Idea Solutions: Xam Idea Solutions Class 12 Chemistry Chapter 3 Electrochemistry Very Short Answer Questions

Review detailed solutions for Class 12 Mathematics. The Xam Idea Solutions Class 12 Chemistry Chapter 3 Electrochemistry Very Short Answer Questions PDF provides comprehensive answers mapped to standard Xam Idea Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.

Mastering Core Concepts with Xam Idea Solutions

Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.

Complete Your Class 12 Exam Preparation

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these [current-page:node:field_author] Solutions for Class 12 Chemistry?

They are chapter-wise solved questions from the book for Class 12 Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 12 Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 12 Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 12 Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 12 Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.