Download Class 12 Chemistry Textbook Solutions: Chapter 02 Solutions
Access comprehensive textbook solutions for Chapter 02 Solutions using the reference material for Class 12 Chemistry. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.
Access Textbook Answers and Solutions
View or download the dedicated Chapter 02 Solutions solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Chemistry.
Long Answer Questions
Question 1. Discuss biological and industrial importance of osmosis. [NCERT Exemplar]
Solution.
(i) The process of osmosis is of great biological and industrial importance as is evident from the following examples:
(ii) Movement of water from soil into plant roots and subsequently into upper portion of the plant occurs partly due to osmosis.
(iii) Preservation of meat against bacterial action by adding salt.
(iv) Preservation of fruits against bacterial action by adding sugar. Bacterium in canned fruit loses water through the process of osmosis, shrivels and dies.
(v) Reverse osmosis is used for desalination of water.
Teacher's Note: Osmosis moves water into plant roots and cells and is applied in preservation and desalination.
Exam Note: Give one biological importance.
Question 2. Answer the following question :
Give reasons for the following: a. At higher altitudes, people suffer from a disease called anoxia. In this disease, they become weak and cannot think clearly. b. When mercuric iodide is added to an aqueous solution of KI, the freezing point is raised.
Solution.
a. At higher altitudes, partial pressure of oxygen is less than that at ground level, so that oxygen concentration becomes less in blood or tissues. Hence, people suffer from anoxia.
b. Due to the formation of complex K2[HgI4], number of particles in the solution decreases and hence the freezing point is raised.
Teacher's Note: Low oxygen pressure at height causes anoxia, and complex formation explains the other reasons in the list.
Exam Note: Give the reason for each part.
Question 3. Define the following terms: (a) Azeotrope (b) Osmotic pressure (c) Colligative properties
Solution.
(a) The binary mixtures of liquids having same composition in liquid and vapour phase and boil at a constant temperature are called azeotropes.
(b) The excess of pressure which must be applied to the solution side to prevent the passage of solvent into it through a semipermeable membrane is called osmotic pressure.
(c) The properties of solutions which depend only on the number of solute particles in the solution but independent of their nature are called colligative properties.
Teacher's Note: Azeotropes cannot be separated by distillation, osmotic pressure stops solvent flow, and colligative properties count particles only.
Exam Note: Give a one-line definition for each term.
Question 4. Calculate the molarity of 9.8% (w/w) solution of H₂SO₄ if the density of the solution is 1.02 g mL⁻¹. (Molar mass of H₂SO₄ = 98 g mol⁻¹) [CBSE (F) 2014]
Solution.
Let the mass of solution = 100 g, ∴ mass of H₂SO₄ = 9.8 g
Number of moles of H₂SO₄ = mass / molar mass = 9.8 g / 98 g mol⁻¹ = 0.1 mol
Volume of solution = mass of solution / density of solution = 100 g / 1.02 g mL⁻¹ = (100/1.02) mL = (1/10.2) L
Molarity = moles of solute / volume of solution (in L) = 0.1 mol / (1/10.2) L = 1.02 mol L⁻¹ or 1.02 M
Teacher's Note: Assume 100 g of solution so percentage gives solute mass directly, then convert volume with density.
Exam Note: Convert millilitres to litres before dividing.
Question 5. When 2.56 g of sulphur was dissolved in 100 g of CS₂, the freezing point lowered by 0.383 K. Calculate the formula of sulphur (Sx). [Kf for CS₂ = 3.83 K kg mol⁻¹, Atomic mass of Sulphur = 32 g mol⁻¹]
Solution.
Here, WB = 2.56 g, WA = 100 g, ΔTf = 0.383 K, Kf = 3.83 K kg mol⁻¹
MB = (Kf × WB × 1000)/(ΔTf × WA) = (3.83 K kg mol⁻¹ × 2.56 g × 1000 g kg⁻¹)/(100 g × 0.383 K) = 256 g mol⁻¹
Now, molecular mass of Sx = x × 32 = 256, x = 256/32 = 8
Therefore, formula of sulphur = S₈
Teacher's Note: The molar mass from freezing point depression divided by the atomic mass 32 gives the number of atoms per molecule.
Exam Note: Divide molar mass by atomic mass.
Question 6. Blood cells are isotonic with 0.9% sodium chloride solution. What happens if we place blood cells in a solution containing (a) 1.2% sodium chloride solution? (b) 0.4% sodium chloride solution? [CBSE Delhi 2016]
Solution.
(a) Water will flow out of the cell and they would shrink.
(b) Water will flow into the cell and they would swell.
Teacher's Note: 1.2% is hypertonic so cells lose water, while 0.4% is hypotonic so cells gain water.
Exam Note: Compare each strength with 0.9%.
Question 7. Define the following terms: (a) Molarity (b) Molal elevation constant (Kb)
Solution.
(a) Molarity may be defined as number of moles of solute dissolved in one litre of solution.
Molarity = moles of solute / volume of solution (in litre)
(b) Molal elevation constant may be defined as the elevation in boiling point when one mole of solute is dissolved in 1000 grams of the solvent.
Teacher's Note: Molarity depends on solution volume, whereas the molal elevation constant is a solvent property for one molal solution.
Exam Note: Include the formula for molarity.
Question 8. A solution containing 15 g urea (molar mass = 60 g mol⁻¹) per litre of solution in water has the same osmotic pressure (isotonic) as a solution of glucose (molar mass = 180 g mol⁻¹) in water. Calculate the mass of glucose present in one litre of its solution. [CBSE (AI) 2014]
Solution.
Osmotic pressure, π = (WB × R × T)/(MB × V)
Osmotic pressure of urea solution = (15 × R × T)/(60 × 1)
Osmotic pressure of glucose solution = (WB × R × T)/(180 × 1)
As, osmotic pressure of urea solution = osmotic pressure of glucose solution, (15 × R × T)/(60 × 1) = (WB × R × T)/(180 × 1)
Mass of glucose, WB = (15 × 180)/60 = 45 g
Teacher's Note: Isotonic solutions have equal molar concentration, so mass of glucose is urea mass scaled by the ratio of molar masses.
Exam Note: Equate the two osmotic pressures.
Question 9. Non-ideal solutions exhibit either positive or negative deviations from Raoult’s law. What are these deviations and how are they caused?
Solution.
Positive deviation from Raoult’s law: When the partial vapour pressure of each component (A and B) consequently the total vapour pressure is greater than the pressure expected on the basis of Raoult’s law then the deviation is termed as positive deviation.
Cause of positive deviation: This type of deviation is observed by solution in which the forces of attraction between A–A molecules and between B–B molecules is greater than the forces of attraction between A–B molecules, i.e., A–B interactions < A–A or B–B interactions.
Negative deviation from Raoult’s law: When the partial vapour pressure of each component of solution is less than the vapour pressure expected on the basis of Raoult’s law then the deviation is called as negative deviation.
Causes of negative deviation: This type of deviation is shown by solutions in which the forces of attraction between A–A and B–B molecules is less than the forces of attraction between A and B molecules, i.e., A–B interactions > A–A or B–B interactions.
Teacher's Note: Weaker A–B attraction lets molecules escape more (positive deviation); stronger A–B attraction holds them back (negative deviation).
Exam Note: Link each deviation to A–B interaction strength.
Question 10. What mass of NaCl (molar mass = 58.5 g mol⁻¹) must be dissolved in 65 g of water to lower the freezing point by 7.50°C? The freezing point depression constant, Kf for water is 1.86 K kg mol⁻¹. Assume van’t Hoff factor for NaCl is 1.87. [CBSE (F) 2010]
Solution.
Given: MB = 58.5 g mol⁻¹, WA = 65 g, WB = ?, ΔTf = 7.5°C or 7.5 K, Kf = 1.86 K kg mol⁻¹, i = 1.87
We know that, ΔTf = i Kf × (WB/MB) × (1000/WA)
WB = (7.5 × 58.5 × 65)/(1.87 × 1.86 × 1000) = 8.199 g ≈ 8.2 g
Teacher's Note: Here i is given as 1.87 because NaCl is not fully dissociated, so use it directly in the depression formula.
Exam Note: Use i = 1.87 and 1000 in the denominator.
Question 11. Explain why on addition of 1 mol glucose to 1 litre water the boiling point of water increases.
Solution.
On addition of glucose, a non-volatile solute to water (a volatile solvent) the vapour pressure of water decreases. In order to make the solution boil, its vapour pressure must be increased by raising the temperature above the boiling point of pure water. In other words, there is an increase in the boiling point of water.
Teacher's Note: Boiling needs vapour pressure to equal atmospheric pressure, so a lowered vapour pressure demands a higher temperature.
Exam Note: Link lowered vapour pressure with higher boiling point.
Question 12. Henry’s law constant for CO₂ in water is 1.67 × 10⁸ Pa at 298 K. Calculate the number of moles of CO₂ in 500 ml of soda water when packed under 2.53 × 10⁵ Pa at the same temperature. [CBSE (AI) 2017C]
Solution.
According to Henry’s law, PCO₂ = KH × xCO₂ or xCO₂ = PCO₂/KH
∴ xCO₂ = 2.53 × 10⁵ Pa / 1.67 × 10⁸ Pa = 1.51 × 10⁻³
Mass of water = density × volume = 1 g mL⁻¹ × 500 mL = 500 g
Moles of water, n = 500 g / 18 g mol⁻¹ = 27.78 mol
xCO₂ = nCO₂/(nH₂O + nCO₂) ≈ nCO₂/nH₂O or nCO₂ = xCO₂ × nH₂O
nCO₂ = 1.51 × 10⁻³ × 27.78 mol = 0.042 mol
Teacher's Note: Mole fraction from Henry’s law, then n(CO₂) is that fraction times moles of water because dissolved CO₂ is tiny.
Exam Note: Neglect n(CO₂) against n(H₂O) in the denominator.
Question 13. Calculate the molality of a sulphuric acid solution in which the mole fraction of water is 0.85.
Solution.
nA/(nA + nB) = 0.85 ....(i)
∴ nB/(nA + nB) = 1 − 0.85 = 0.15 ....(ii)
Dividing (ii) by (i), we get nB/nA = 0.15/0.85 or nB/(1000/18) = 0.15/0.85
or nB = (0.15/0.85) × (1000/18) = 9.8 mol
Hence, molality = 9.8 m
Teacher's Note: Taking 1000 g of water as the solvent makes moles of acid directly equal to molality.
Exam Note: Take 1000 g water as solvent.
Question 14. The graphical representation of vapour pressures of two component system as a function of composition is given alongside. By graphic inspection, answer the following questions: (a) Are the A–B interactions weaker, stronger or of the same magnitude as A–A and B–B? (b) Name the type of deviation shown by this system from Raoult’s law. (c) Predict the sign of ΔmixH for this system. (d) Predict the sign of ΔmixV for this system. (e) Give an example of such a system. (f) What type of azeotrope will this system form, if possible? [Figure: pA, pB and total p lie below the straight Raoult’s law lines.]
Solution.
(a) Stronger
(b) Negative deviation
(c) –ve
(d) –ve
(e) A liquid mixture consisting of 20% acetone and 80% chloroform by mass.
(f) Maximum boiling azeotrope.
Teacher's Note: All curves lie below the dotted Raoult lines, which means stronger A–B attraction, negative deviation and a maximum-boiling azeotrope.
Exam Note: Read the curves against the dotted Raoult lines.
Question 15. What is the freezing point of 0.4 molal solution of acetic acid in benzene in which it dimerises to the extent of 85%? Freezing point of benzene is 278.4 K and its molar heat of fusion is 10.042 kJ mol⁻¹.
Solution.
Given, M = 78 g mol⁻¹, Tf° = 278.4 K, ΔfusH = 10.042 kJ mol⁻¹
Kf = R(Tf°)²M/(1000 × ΔfusH) = (8.314 × 10⁻³ × (278.4)² × 78)/(1000 × 10.042) = 5.0 K kg mol⁻¹
2CH₃COOH → (CH₃COOH)₂ (dimer)
α = (i − 1)/((1/n) − 1) ⇒ 0.85 = (i − 1)/((1/2) − 1) or i = 1 − 0.425 = 0.575
ΔTf = iKf m = 0.575 × 5 × 0.4 = 1.15 K
Tf = Tf° − ΔTf = 278.4 K − 1.15 K = 277.25 K
Teacher's Note: Dimerisation halves the particle count, so i = 1 − α/2; Kf is first calculated from the heat of fusion.
Exam Note: Get Kf and i before ΔTf.
Question 16. Explain the following: (a) Solution of chloroform and acetone is an example of maximum boiling azeotrope. (b) A doctor advised a person suffering from high blood pressure to take less quantity of common salt.
Solution.
(a) This solution has lesser vapour pressure due to stronger interactions (hydrogen bonds) between chloroform and acetone molecules.
(b) Because higher quantity of NaCl will increase number of sodium and chloride ions in the body fluid which can increase the osmotic pressure of body fluid, i.e., blood pressure of a person.
Teacher's Note: Hydrogen bonding lowers vapour pressure so the mixture boils higher, and extra salt raises osmotic pressure of body fluid.
Exam Note: Mention hydrogen bonds and ions raising osmotic pressure.
Question 17. Why a person suffering from high blood pressure is advised to take minimum quantity of common salt?
Solution.
Osmotic pressure is directly proportional to the concentration of the solutes. Our body fluid contains a number of solutes. On taking large amount of common salt, Na⁺ and Cl⁻ ions enter into the body fluid thereby raising the concentration of the solutes. As a result, osmotic pressure increases which may rupture the blood cells.
Teacher's Note: More Na⁺ and Cl⁻ in blood raises solute concentration and osmotic pressure, which strains cells and raises blood pressure.
Exam Note: State osmotic pressure is proportional to concentration.
Question 18. 2 g of benzoic acid (C₆H₅COOH) dissolved in 25 g of benzene shows a depression in freezing point equal to 1.62 K. Molal depression constant for benzene is 4.9 K kg mol⁻¹. What is the percentage association of acid if it forms dimer in solution?
Solution.
The given quantities are WB = 2 g, WA = 25 g, ΔTf = 1.62 K, Kf = 4.9 K kg mol⁻¹
Substituting these values in equation MB = (Kf × WB × 1000)/(ΔTf × WA), we get
MB = (4.9 K kg mol⁻¹ × 2 g × 1000 g kg⁻¹)/(1.62 K × 25 g) = 241.98 g mol⁻¹
Thus, observed molecular mass of benzoic acid in benzene = 241.98 g mol⁻¹. Normal molecular mass of C₆H₅COOH = 122 g mol⁻¹
∴ i = Normal molecular mass / Observed molecular mass = 122 / 241.98 = 0.504 ....(i)
If α represents the degree of association of solute then we would have (1 − α) mole of benzoic acid left in unassociated form and corresponding α/2 as associated moles of benzoic acid at equilibrium.
2(C₆H₅COOH) ⇌ (C₆H₅COOH)₂. Initially 1 mol and 0; at equilibrium (1 − α) mol and α/2 mol.
Thus, total number of moles of particles at equilibrium = 1 − α + α/2 = 1 − α/2
i = (1 − α/2)/1 = 1 − α/2 ....(ii)
From (i) and (ii), 0.504 = 1 − α/2, α/2 = 1 − 0.504 = 0.496, or α = 0.496 × 2 = 0.992
Therefore, degree of association of benzoic acid in benzene is 99.2%.
Teacher's Note: Dimerisation gives 1 − α/2 particles per mole, which is equated to normal mass divided by observed mass.
Exam Note: Set i = 1 − α/2 and solve for α.
Question 19. 0.6 mL of acetic acid (CH₃COOH), having density 1.06 g mL⁻¹, is dissolved in 1 litre of water. The depression in freezing point observed for this strength of acid was 0.0205°C. Calculate the van’t Hoff factor and the dissociation constant of acid.
Solution.
Mass of acetic acid = density × volume = 1.06 g mL⁻¹ × 0.6 mL = 0.636 g
Number of moles of acetic acid = 0.636 g / 60 g mol⁻¹ = 0.0106 mol
Mass of water = 1 g mL⁻¹ × 1000 mL = 1000 g = 1 kg
Molality = 0.0106 mol / 1 kg = 0.0106 mol kg⁻¹
Calculated ΔTf = Kf · m = 1.86 K kg mol⁻¹ × 0.0106 mol kg⁻¹ = 0.0197 K
van’t Hoff factor (i) = Observed freezing point depression / Calculated freezing point depression = 0.0205 K / 0.0197 K = 1.041 ....(i)
If α is the degree of dissociation of acetic acid, then we would have n(1 − α) moles of undissociated acid, nα moles of CH₃COO⁻ and nα moles of H⁺ ions at equilibrium.
CH₃COOH ⇌ H⁺ + CH₃COO⁻. Initially n mol, 0, 0; at equilibrium n(1 − α), nα, nα
Thus total moles of particles = n − nα + nα + nα = n(1 + α)
i = n(1 + α)/n = 1 + α ....(ii)
From (i) and (ii), 1.041 = 1 + α ⇒ α = 0.041
Ka = [CH₃COO⁻][H⁺]/[CH₃COOH]
[CH₃COOH] = 0.0106 (1 − 0.041) = 0.0106 × 0.959; [H⁺] = 0.0106 × 0.041; [CH₃COO⁻] = 0.0106 × 0.041
∴ Ka = (0.0106 × 0.041 × 0.0106 × 0.041)/(0.0106 × 0.959) = 1.86 × 10⁻⁵
Teacher's Note: A weak acid gives 1 + α particles, so α = i − 1, then Ka = Cα²/(1 − α).
Exam Note: Find α from i, then substitute for Ka.
Free study material for Chemistry
Download Xam Idea Solutions for Class 12 Math PDF
Access Class 12 Mathematics Solutions
Access the complete chapter-wise PDF for Xam Idea Solutions Class 12 Chemistry Chapter 2 Solutions Long Answer Questions. These structured Xam Idea Solutions solutions for Class 12 Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.
Step-by-Step Mathematical Explanations
Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.
Complete Your Class 12 Exam Preparation
Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.
FAQs
They are chapter-wise solved questions from the book for Class 12 Chemistry. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.