Xam Idea Solutions Class 12 Chemistry Chapter 2 Solutions Short Answer Questions I

Step-by-Step Solutions for Class 12 Chemistry Chapter 02 Solutions

Access comprehensive textbook solutions for Chapter 02 Solutions using the reference material for Class 12 Chemistry. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.

Download Chapter 02 Solutions Textbook Solutions PDF

Navigate directly to the solved Chemistry textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.

Short Answer Questions I

Question 1. Answer the following question :

Why is an increase in temperature observed on mixing chloroform and acetone?

Solution.

The bonds between chloroform molecules and molecules of acetone are dipole– dipole interactions but on mixing, the chloroform and acetone molecules, they start forming hydrogen bonds which are stronger bonds resulting in the release of energy. This gives rise to an increase in temperature.

Q. Why does sodium chloride solution freeze at a lower temperature than water?

[CBSE (F) 2013]

Ans. When a non-volatile solute is dissolved in a solvent, the vapour pressure decreases. As a result, the solvent freezes at a lower temperature.

Teacher's Note: Mixing chloroform and acetone forms hydrogen bonds stronger than the original attractions, so heat is released.

Exam Note: Link stronger bonds with heat release.

Question 2. Define an ideal solution and write one of its characteristics. [CBSE Delhi 2014]

Solution.

A solution which obeys Raoult’s law over the entire range of concentration is called ideal solution. The important characteristics of an ideal solution are

i. The enthalpy of mixing of pure components to form the solution is zero i.e., ∆mixH = 0 ii. The volume of mixing is zero i.e., ∆mixV = 0

Teacher's Note: An ideal solution obeys Raoult's law at all concentrations, with no heat change on mixing.

Exam Note: Define it and give one property.

Question 3. Define azeotropes. What type of azeotrope is formed by negative deviation from Raoult’s law? Give an example. [CBSE Delhi 2015]

Solution.

. Azeotropes are binary liquid mixtures having the same composition in liquid and vapour phase and boil at a constant temperature.

Maximum boiling azeotrope is formed by negative deviation from Raoult’s law. A mixture of 68% nitric acid and 32% water by mass is an example of maximum boiling azeotrope.

Teacher's Note: Azeotropes boil at constant temperature with the same composition in liquid and vapour, and negative deviation gives the maximum-boiling type.

Exam Note: Name the type and an example.

Question 4. State the following:

Raoult’s law in its general form in reference to solutions.

Solution.

Raoult’s law: It states that for any solution, the partial pressure of each volatile component in the solution is directly proportional to its mole fraction.

Q. Henry’s law about partial pressure of a gas in a mixture.

[CBSE (AI) 2011]

Ans. Henry’s law: It states that the partial pressure of a gas in vapour phase (P) is proportional to its mole fraction (x) in the solution.

Teacher's Note: Raoult's law relates a component's partial vapour pressure to its mole fraction, and Henry's law does so for gases.

Exam Note: State both laws briefly.

Question 5. Answer the following question :

Gas (A) is more soluble in water than Gas (B) at the same temperature. Which one of the two gases will have the higher value of KH (Henry’s constant) and why?

Solution.

According to Henry’s law, p = KH x, i.e., higher the value of KH lower is the solubility of the gas in the liquid. Therefore, Gas B will have higher value of KH than gas A.

Q. In non-ideal solution, what type of deviation shows the formation of maximum boiling azeotropes?

[CBSE Central 2016]

Ans. Negative deviation from Raoult’s law.

Teacher's Note: A gas with higher solubility has a lower Henry's constant, so the less soluble gas has the higher constant.

Exam Note: Relate constant to solubility.

Question 6. Write two differences between a solution showing positive deviation and a solution showing negative deviation from Raoult’s law. [CBSE East 2016]

Solution.

Solutions showing positive Solution showing negative deviation from deviation from Raoult’s law Raoult’s law

(i)PA>P0AxAandPB>P0BxB

(i) PA<P0AxAandPB<P0BxB

(ii) ∆mix H > 0, ∆mix V > 0

(ii) ∆mix H < 0, ∆mix V < 0

(iii) Form minimum boiling azeotropes.

(iii) Form maximum boiling azeotropes.

Teacher's Note: Positive deviation has weaker interactions and absorbs heat, while negative deviation is the reverse.

Exam Note: Give two differences.

Question 7. What type of deviation is shown by a mixture of ethanol and acetone? What type of azeotrope is formed by mixing ethanol and acetone? [CBSE (F) 2013]

Solution.

A mixture of ethanol and acetone shows positive deviation.

The azeotrope formed is minimum boiling azeotropes.

Teacher's Note: Ethanol and acetone show positive deviation and form a minimum-boiling azeotrope.

Exam Note: Name both the deviation and azeotrope.

Question 8. (i) On mixing liquid X and liquid Y, volume of the resulting solution decreases.What type of deviation from Raoult’s law is shown by the resulting solution? What change in temperature would you observe after mixing liquids X and Y? (ii) What happens when we place the blood cell in water (hypotonic solution)? Give reason. [CBSE Allahabad 2015]

Solution.

(i) ♦ The solution will show negative deviation from Raoult’s law. ♦ Temperature will rise.

(ii) Due to osmosis water enters into the cell and blood cell will swell.

Teacher's Note: Volume decrease on mixing means negative deviation with heat release, and a blood cell in pure water swells.

Exam Note: Link volume change with deviation.

Question 9. Explain the solubility rule “like dissolves like” in terms of intermolecular forces that exist in solutions. [NCERT Exemplar]

Solution.

A substance (solute) dissolves in a solvent if the intermolecular interactions are similar in both the components; for example, polar solutes dissolve in polar solvents and non polar solutes in non polar solvents thus we can say “like dissolves like”.

Teacher's Note: Substances dissolve when solute and solvent have similar intermolecular forces, so polar dissolves in polar.

Exam Note: Explain using polarity.

Question 10. CCl4 and water are immiscible whereas ethanol and water are miscible in all proportions. Correlate this behaviour with molecular structure of these compounds.

Solution.

CCl4 is a non-polar covalent compound, whereas water is a polar compound. CCl4 can neither form hydrogen bonds with water molecules nor can it break hydrogen bonds between water molecule, therefore, it is insoluble in water.

Ethanol is a polar compound and can form hydrogen bonds with water, which is a polar solvent, therefore it is miscible with water in all proportions.

Teacher's Note: Carbon tetrachloride is non-polar and cannot interact with water, while ethanol hydrogen-bonds with water and mixes.

Exam Note: Explain with hydrogen bonding.

Question 11. State Henry’s Law. What is the significance of KH?

Solution.

Henry’s law: It states that “the partial pressure of the gas in vapour phase (p) is proportional to the mole fraction of the gas (x) in the solution” and is expressed as:

p = KH x

where, KH is the Henry’s law constant. Significance of KH: Higher the value of Henry’s law constant KH, the lower is the solubility of the gas in the liquid.

Teacher's Note: Henry's law relates gas partial pressure to its mole fraction in solution, and the constant shows the gas's solubility.

Exam Note: State the law and the constant's meaning.

Question 12. After removing the outer shell of two eggs in dil. HCl, one is placed in distilled water and the other in a saturated solution of NaCl. What will you observe and why?

Solution.

Egg in water will swell whereas in NaCl solution it will shrink. This is because due to osmosis, the net flow of solvent is from less concentrated to more concentrated solution.

Teacher's Note: In osmosis, water flows from dilute to concentrated solution, so egg swells in water and shrinks in salt solution.

Exam Note: Contrast the two eggs.

Question 13. When fruits and vegetables that have dried are placed in water, they slowly swell and return to the original form. Explain why. Would a temperature increase accelerate the process? Explain.

Solution.

The cell walls of the fruits and vegetables act as semipermeable membrane. When they are dried, concentration inside becomes higher. On placing in water, the process of osmosis takes place. So, they swell and return to their original form. The process will be accelerated with increase of temperature because osmosis becomes faster with increase in temperature.

Teacher's Note: Dried fruit cells act as semipermeable membranes, so they absorb water by osmosis and swell.

Exam Note: Name osmosis as the cause.

Question 14. Will the elevation in boiling point be same if 0.1 mol of sodium chloride or 0.1 mol of sugar is dissolved in 1 L of water? Explain. [CBSE Sample Paper 2016] [HOTS]

Solution.

No, the elevation in boiling point is not the same. NaCl, being an electrolyte, dissociates almost completely to give Na+ and Cl– ions whereas glucose, being non- electrolyte does not dissociate. Hence, the number of particles in 0.1 M NaCl solution is nearly double than 0.1 M glucose solution. Elevation in boiling point being a colligative property, is therefore, nearly twice for 0.1 M NaCl solution than for 0.1 M glucose solution.

Teacher's Note: Sodium chloride dissociates into ions, giving more particles than sugar, so its boiling point rises more.

Exam Note: Compare particle numbers.

Question 15. State Henry’s law. Write its one application. What is the effect of temperature on solubility of gases in liquid? [CBSE (F) 2016]

Solution.

It states that the partial pressure of a gas in vapour phase (p) is proportional to the mole fraction of the gas (x) in the solution.

p ∝ x or p = KHx, where KH is the Henry’s constant.

Application of Henry’s law: To increase the solubility of CO₂ in soft drinks and soda water, the bottle is sealed under high pressure.

Effect of temperature on solubility: As dissolution is an exothermic process, therefore, according to Le Chatelier’s principle solubility should decrease with rise in temperature.

Teacher's Note: Gas solubility rises with pressure, as in sealed soda bottles, and falls when temperature rises because dissolution releases heat.

Exam Note: State law, one use, temperature effect.

Question 16. State Raoult’s law for a solution containing non-volatile solute. What type of deviation from Raoult’s law is shown by a solution of chloroform and acetone and why? [CBSE (F) 2017]

Solution.

It states that the relative lowering of vapour pressure is equal to mole fraction of solute when solvent alone is volatile and is expressed as

(PA° − Ptotal) / PA° = xB

A solution of chloroform and acetone shows negative deviation from Raoult’s law. This is because chloroform molecule is able to form H–bond with acetone molecule as shown below.

CH3CH3OCHCClClClhydrogen bond

It decreases the escaping tendency of molecules of each component from the surface of solution and consequently the vapour pressure decreases resulting in negative deviation from Raoult’s law.

Teacher's Note: Chloroform’s hydrogen bonds to acetone’s oxygen, so molecules escape less and vapour pressure falls below the Raoult value.

Exam Note: Name the deviation and draw the hydrogen bond.

Question 17. Differentiate between molarity and molality of a solution. Explain how molarity value of a solution can be converted into its molality. [CBSE (F) 2011]

Solution.

Molarity (M) is the number of moles of solute dissolved in one litre of solution whereas molality (m) is the number of moles of the solute per thousand grams of solvent.

If MB is the molar mass of solute, d is the density of solution then molarity (M) value of a solution can be converted into its molality (m) by using the following formula.

m = (1000 × M) / (1000 × d − M × MB)

Teacher's Note: Molarity uses solution volume, molality uses solvent mass; the formula subtracts the solute mass from 1000d to get solvent mass.

Exam Note: Give both definitions and the conversion formula.

Question 18. Define the term osmotic pressure. Describe how the molecular mass of a substance can be determined by a method based on measurement of osmotic pressure. [CBSE Delhi 2012]

Solution.

Osmotic pressure (π) is defined as the extra pressure that must be applied to the solution side in order to prevent the flow of solvent molecules into it through a semipermeable membrane.

According to van’t Hoff equation

π = (nB/V) RT

where π is the osmotic pressure, R is the gas constant and V is the volume of solution in litres containing nB moles of the solute.

If WB grams of the solute of molar mass, MB is present in the solution, then nB = WB/MB and we can write

π = (WB × R × T) / (MB × V) or MB = (WB × R × T) / (π × V)

Thus, knowing WB, T, π and V, the molecular mass of the solute, MB can be calculated.

Teacher's Note: Writing moles as mass over molar mass in π = nRT/V lets measured π give the molar mass.

Exam Note: Show the derivation of MB from π.

Question 19. State Raoult’s law for the solution containing volatile components. What is the similarity between Raoult’s law and Henry’s law? [CBSE Delhi 2014]

Solution.

It states that for a solution of volatile liquids, the partial vapour pressure of each component in the solution is directly proportional to its mole fraction. According to Raoult’s law, for a volatile component, A of the solution

PA ∝ xA or PA = PA° xA, where PA° is the vapour pressure of pure component A.

If one of the component is so volatile that it exist as a gas then according to Henry’s law p = KHx, where KH is the Henry law constant i.e., the partial vapour pressure of the volatile component (gas) is directly proportional to its mole fraction in the solution.

Thus the similarity between Raoult’s law and Henry’s law is that both state that the partial vapour pressure of the volatile component or gas is directly proportional to its mole fraction in the solution.

Teacher's Note: Both laws make partial pressure proportional to mole fraction; only the proportionality constant differs.

Exam Note: Write both equations and the common feature.

Question 20. Define the following terms: (a) Abnormal molar mass (b) van’t Hoff factor (i) [CBSE Delhi 2017]

Solution.

Abnormal molar mass: When the molar mass of a substance determined by using any of the colligative properties comes out to be different than the theoretically expected molar mass, the substance said to show abnormal molar mass.

van’t Hoff factor (i): van’t Hoff factor (i) gives the extent of association or dissociation of the solute particles in the solution. It may be defined as the ratio of observed colligative property to calculated colligative property.

i = Observed colligative property / Calculated colligative property

Teacher's Note: Association or dissociation of solute makes measured molar mass differ from the formula value, and i measures that change.

Exam Note: Define both terms with the ratio.

Question 21. State Raoult’s law for the solution containing volatile components. Write two differences between an ideal solution and a non-ideal solution. [CBSE Panchkula 2015]

Solution.

Raoult’s law states that for a solution of volatile liquids the partial vapour pressure of each component is directly proportional to its mole fraction.

Differences between ideal and non-ideal solutions

S.No.Ideal solutionNon-ideal solution
(i)Obeys Raoult’s law over entire range of concentration i.e., PA = PA° xA; PB = PB° xBDoes not obey Raoult’s law over entire range of concentration i.e., PA ≠ PA° xA; PB ≠ PB° xB
(ii)ΔmixH = 0; ΔmixV = 0ΔmixH ≠ 0; ΔmixV ≠ 0
(iii)Does not form azeotrope.Forms azeotrope.

Teacher's Note: Ideal solutions follow Raoult’s law with zero enthalpy and volume change, while non-ideal ones deviate and can form azeotropes.

Exam Note: Give any two differences from the table.

Question 22. A solution prepared by dissolving 8.95 mg of a gene fragment in 35.0 mL of water has an osmotic pressure of 0.335 torr at 25°C. Assuming that the gene fragment is a non-electrolyte, calculate its molar mass. [CBSE (AI) 2011]

Solution.

MB = (WB × R × T) / (π × V) ....(i)

Here, WB = 8.95 mg = 8.95 × 10⁻³ g, R = 0.0821 L atm mol⁻¹ K⁻¹

T = 25°C = (25 + 273) K = 298 K, π = 0.335 torr = 0.335/760 atm

V = 35 mL = 35 × 10⁻³ L

Substituting these values in the equation (i), we get

MB = (8.95 × 10⁻³ g × 0.0821 L atm mol⁻¹ K⁻¹ × 298 K × 760) / (0.335 atm × 35 × 10⁻³ L) = 14193.3 g mol⁻¹

Teacher's Note: Convert torr to atm by dividing by 760 and millilitres to litres before substituting in M = WRT/(πV).

Exam Note: Convert units first, then substitute.

Question 23. Henry’s law constant (KH) for the solution of methane in benzene at 298 K is 4.27 × 10⁵ mm Hg. Calculate the solubility of methane in benzene at 298 K under 760 mm Hg. [CBSE (F) 2013]

Solution.

Here, KH = 4.27 × 10⁵ mm Hg, p = 760 mm Hg

According to Henry’s law, p = KH xCH₄

xCH₄ = p/KH = 760 mm Hg / (4.27 × 10⁵ mm Hg) = 1.78 × 10⁻³

Mole fraction of methane in benzene, xCH₄ = 1.78 × 10⁻³.

Teacher's Note: Solubility here means the mole fraction of dissolved gas, found directly as pressure divided by Henry’s constant.

Exam Note: Give the answer as a mole fraction.

Question 24. Derive the relationship between relative lowering of vapour pressure and molar mass of the solute. [CBSE Chennai 2015]

Solution.

From Raoult’s law we have, P = PA + PB

If solute B is non-volatile, then P = PA or P = PA° xA

P = PA° (1 − xB) = PA° − PA° xB

PA° xB = PA° − P

(PA° − P) / PA° = xB or ΔP/PA° = nB / (nA + nB)

For a dilute solution nB << nA, so nB can be neglected in denominator in comparison to nA.

ΔP/PA° = nB/nA = (WB/MB) / (WA/MA) = (WB × MA) / (MB × WA)

MB = (PA° × WB × MA) / (ΔP × WA)

Teacher's Note: Relative lowering equals mole fraction of solute; dropping nB in the denominator for dilute solutions isolates MB.

Exam Note: Mention the dilute-solution approximation nB << nA.

Question 25. Calculate the freezing point depression expected for 0.0711 m aqueous solution of Na₂SO₄. If this solution actually freezes at –0.320°C, what would be the value of van’t Hoff factor? (Kf for water is 1.86 K kg mol⁻¹). [CBSE Delhi 2009; (F) 2009]

Solution.

Observed ΔTf = [273.15 − (−0.320 + 273.15)] K = 0.320 K

Calculated ΔTf = Kf · m = 1.86 K kg mol⁻¹ × 0.0711 mol kg⁻¹ = 0.132 K

i = Observed value of ΔTf / Calculated value of ΔTf = 0.320 K / 0.132 K = 2.42

Teacher's Note: Expected depression assumes no dissociation; dividing the observed value by it gives i, close to the ideal 3 for Na₂SO₄.

Exam Note: Compute both depressions, then divide.

Question 26. When 1.5 g of a non-volatile solute was dissolved in 90 g of benzene, the boiling point of benzene raised from 353.23 K to 353.93 K. Calculate the molar mass of the solute. (Kb for benzene = 2.52 K kg mol⁻¹) [CBSE Chennai 2015]

Solution.

ΔTb = 353.93 K − 353.23 K = 0.7 K

Substituting WB = 1.5 g, WA = 90 g, ΔTb = 0.7 K, Kb = 2.52 K kg mol⁻¹ in the expression

MB = (Kb × WB × 1000) / (ΔTb × WA), we get

MB = (2.52 K kg mol⁻¹ × 1.5 g × 1000 g kg⁻¹) / (0.7 K × 90 g)

MB = 60 g mol⁻¹

Teacher's Note: The boiling point rise is the difference of the two temperatures, then M = KbWB×1000/(ΔTbWA).

Exam Note: Write ΔTb before substituting.

Question 27. State Raoult’s law for a solution containing volatile components. How does Raoult’s law become a special case of Henry’s law?

Solution.

For a solution of volatile liquids, Raoult’s law states that the partial vapour pressure of each component of the solution is directly proportional to its mole fraction present in solution, i.e.,

pA ∝ xA or pA = pA° xA

According to Henry’s law, the partial pressure of a gas in vapour phase (p) is directly proportional to mole fraction (x) of the gas in the solution.

p = KH x

On comparing it with Raoult’s law it can be seen that partial pressure of the volatile component or gas is directly proportional to its mole fraction in solution, only the proportionality constant KH differs from pA°. Thus, Raoult’s law becomes a special case of Henry’s law when KH becomes equal to pA°.

Teacher's Note: Both laws read p = constant × x; Raoult’s law is Henry’s law with KH equal to p°.

Exam Note: State KH = p° as the special case.

Question 28. Given alongside is the sketch of a plant for carrying out a process. (i) Name the process occurring in the given plant. (ii) To which container does the net flow of solvent take place? (iii) Name one SPM which can be used in this plant. (iv) Give one practical use of the plant. [Figure: fresh water container and sea water container separated by a membrane, piston on the sea water side, Papplied > π]

Solution.

Fresh watercontainerSea watercontainerPapplied> πSemipermeable membrane (SPM)Pistonsolvent flow

(i) Reverse osmosis.

(ii) Fresh water container.

(iii) Cellulose acetate placed on a suitable support.

(iv) Desalination of sea water.

Teacher's Note: Applied pressure above osmotic pressure pushes water through the membrane from sea water into the fresh water side.

Exam Note: Link Papplied > π with reverse osmosis.

Download Xam Idea Solutions for Class 12 Math PDF

Complete Math Solutions for Xam Idea Solutions Class 12 Chemistry Chapter 2 Solutions Short Answer Questions I

Access the complete chapter-wise PDF for Xam Idea Solutions Class 12 Chemistry Chapter 2 Solutions Short Answer Questions I. These structured Xam Idea Solutions solutions for Class 12 Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.

Concept-Driven Math Answers

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Complete Your Class 12 Exam Preparation

In addition to these Xam Idea Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.

FAQs

What are these [current-page:node:field_author] Solutions for Class 12 Chemistry?

They are chapter-wise solved questions from the book for Class 12 Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 12 Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 12 Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 12 Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 12 Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.