Pradeep's KL Gogia Solutions Class 12 Chemistry Chapter 2 Solution

Step-by-Step Pradeep's KL Gogia Solutions for Class 12 Chemistry Chapter 02 Solution

Access comprehensive textbook solutions for Chapter 02 Solution using the Pradeep's KL Gogia reference material for Class 12 Chemistry. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.

Download Chapter 02 Solution Textbook Solutions PDF

Navigate directly to the solved Chemistry textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.

Chapter 2 Solutions - Questions and Answers (pp. 19-33)

Very Short Answer Type Questions (1 Mark)

Question 1 Mark Q.1. What is Van’t Hoff factor ?

Solution. It is the ratio of normal molecular mass to observed molecular mass. It is denoted as i.
i = normal molecular mass / observed molecular mass
= no. of particles after association or dissociation / no. of particles before association or dissociation

Teacher's Note: Definition has two equivalent forms; i > 1 for dissociation, i < 1 for association.

Exam Note: State the ratio and both forms for the mark.

Question 1 Mark Q.2. What is the Van’t Hoff factor in K4[Fe(CN)6] and BaCl2 ?

Solution. 5 and 3

Teacher's Note: Count ions on complete dissociation: 4K+ + [Fe(CN)6]4− = 5; Ba2+ + 2Cl− = 3.

Exam Note: Give both values in order: 5 and 3.

Question 1 Mark Q.3. Why the molecular mass becomes abnormal ?

Solution. Due to association or dissociation of solute in given solvent.

Teacher's Note: Association lowers particle count (mass appears higher); dissociation raises it (mass appears lower).

Exam Note: Mention both association and dissociation.

Question 1 Mark Q.4. Define molarity. How it is related with normality ?

Solution. N = M × Basicity or acidity

Teacher's Note: Molarity is moles of solute per litre of solution; normality multiplies it by basicity/acidity.

Exam Note: Write definition plus N = M × n-factor.

Question 1 Mark Q.5. How molarity is related with percentage and density of solution ?

Solution. M = P × d × 10 / M.M2.

Teacher's Note: P is mass percent, d density in g/mL, M2 molar mass of solute; factor 10 converts to per litre.

Exam Note: Quote the formula with symbols defined.

Question 1 Mark Q.6. What role does the molecular interaction play in the solution of alcohol and water ?

Solution. Positive deviation from ideal behaviour.

Teacher's Note: Alcohol–water H-bonds are weaker than those in pure components, so vapour pressure exceeds Raoult’s value.

Exam Note: Name the deviation: positive.

Question 1 Mark Q.7. What is van’t Hoff factor ? How is it related with : (a) degree of dissociation (b) degree of association

Solution. (a) α = (i − 1)/(n − 1)
(b) α = (i − 1)/((1/n) − 1)

Teacher's Note: Here n is the number of particles formed on dissociation (or molecules that associate into one).

Exam Note: Write both relations; define i as in Q.1.

Question 1 Mark Q.8. Why NaCl is used to clear snow from roads ?

Solution. It lowers freezing point of water.

Teacher's Note: Salt makes a solution whose freezing point is below 0°C, so ice melts at lower temperatures.

Exam Note: Link to depression of freezing point.

Question 1 Mark Q.9. Why the boiling point of solution is higher than pure liquid ?

Solution. Due to lowering in vapour pressure.

Teacher's Note: A non-volatile solute lowers vapour pressure, so a higher temperature is needed to reach atmospheric pressure.

Exam Note: Say: lower vapour pressure, so higher boiling point.

Question 1 Mark Q.10. Out of 1 M and 1 m aqueous solution which is more concentrated ?

Solution. 1 M as density of water is 1 gm/ml.

Teacher's Note: 1 m puts 1 mol in 1 kg solvent, giving over 1 L of solution, so it is more dilute.

Exam Note: Compare solution volume against solvent mass.

Question 1 Mark Q.11. Henry law constant for two gases are 21.5 and 49.5 atm, which gas is more soluble ?

Solution. KH is inversely proportional to solubility. Hence the gas with KH = 21.5 atm is more soluble.

Teacher's Note: Lower KH means more gas dissolves at the same pressure.

Exam Note: State the gas with 21.5 atm.

Question 1 Mark Q.13. Calculate the volume of 75% of H2SO4 by weight (d = 1.8 gm/ml) required to prepare 1 L of 0.2 M solution.

Solution. Hint : M1 = P × d × 10/98
M1V1 = M2V2
V1 = 14.5 ml

Teacher's Note: M1 = 75×1.8×10/98 = 13.78 M; V1 = 0.2×1000/13.78 = 14.5 mL (verified).

Exam Note: Dilution formula; show M1 first.

Question 1 Mark Q.14. Why water cannot be completely separated from aqueous solution of ethyl alcohol ?

Solution. Due to formation of azeotrope at (95.4%).

Teacher's Note: Ethanol–water forms a minimum-boiling azeotrope; vapour and liquid have the same composition.

Exam Note: Name azeotrope and its composition.

Question 1 Mark Q.15. What is the molarity of pure water ?

Solution. 55.5

Teacher's Note: 1000 g / 18 g mol−1 = 55.5 mol in 1 L.

Exam Note: Show 1000/18.

Question 1 Mark Q.16. Calculate the moles of PO4−3 present in 4L of 10−5 M Ca3(PO4)2.

Solution. 8 × 10−5

Teacher's Note: Moles of salt = 4×10−5; each unit has 2 phosphate ions, giving 8×10−5 mol (verified).

Exam Note: Do not forget the factor 2 from the formula.

Question 1 Mark Q.17. Why anhydrous salts like NaCl or CaCl2 are used to clear snow from roads on hills ?

Solution. Hint : They depress freezing point of water.

Teacher's Note: The salt solution freezes below 0°C, so snow melts.

Exam Note: Link to freezing point depression.

Question 1 Mark Q.18. What is the effect on boiling and freezing point of a solution on addition of NaCl ?

Solution. Hint : Boiling point increases and freezing point decreases.

Teacher's Note: Both are colligative effects of the added solute particles.

Exam Note: State both effects.

Question 1 Mark Q.19. Out of M and m, which is better concentration term and why ?

Solution. Hint : m, it is independent of temperature change.

Teacher's Note: Molality uses mass, molarity uses volume, which changes with temperature.

Exam Note: Reason: mass is temperature independent.

Question 1 Mark Q.20. Why osmotic pressure is considered as colligative property ?

Solution. Hint : It depends upon number of moles of solute present in solution.

Teacher's Note: Depends on particle number, not identity of solute.

Exam Note: Say: depends on number of particles only.

Question 1 Mark Q.21. Liquid A and B on mixing produce a warm solution. Which type of deviation does this solution show ?

Solution. Hint : −ve deviations

Teacher's Note: Heat evolved means stronger A–B interactions, so negative deviation.

Exam Note: Link warming to negative deviation.

Question 1 Mark Q.22. Give an example of a compound in which hydrogen bonding results in the formation of a dimer.

Solution. Hint : Carboxylic acids or other example

Teacher's Note: Acetic acid forms dimers through two O–H···O bonds.

Exam Note: Name acetic acid as an example.

Question 1 Mark Q.23. What role does the molecular interaction play in solution containing chloroform and acetone ?

Solution. Hint : H-bonding formed, results in negative deviation from Raoult’s law.

Teacher's Note: Chloroform H bonds to acetone C=O, lowering vapour pressure.

Exam Note: Name H-bonding and negative deviation.

Short Answer Type Questions (2 Marks)

Question 2 Marks Q.7. How many grams of KCl should be added to 1 kg of water to lower its freezing point to − 8.0ºC ? (Kf = 1.86 K kg/mol)

Solution. Since KCl dissociate in water completely, i = 2.
ΔTf = i Kf × m
m = ΔTf/(iKf) = 8/(2×1.86) = 2.15 mol/kg
Grams of KCl = 2.15 × 74.5 = 160.2 g/kg

Teacher's Note: The book prints 74; molar mass of KCl is 74.5, which gives the printed 160.2 g (verified).

Exam Note: Use i = 2; state molar mass of KCl.

Question 2 Marks Q.10. Define reverse osmosis. Write its one use.

Solution. Desalination of water.

Teacher's Note: Reverse osmosis: pressure larger than osmotic pressure applied on solution side pushes solvent out through a semipermeable membrane.

Exam Note: Give definition and one use.

Question 2 Marks Q.11. Why does an azeotropic mixture distills without any change in composition ?

Solution. Hint : It has same composition of components in liquid and vapour phase.

Teacher's Note: Vapour has the same composition as liquid, so distillation cannot enrich either component.

Exam Note: State: same composition in both phases.

Question 2 Marks Q.13. If the density of some lake water is 1.25 gm/ml and contains 92 gm of Na+ ions per kg of water, calculate the molality of Na+ ion in the lake.

Solution. n = 92/23 = 4
m = 4/1 = 4 m

Teacher's Note: Molality uses kg of solvent; the density given is not needed.

Exam Note: Do not use density; divide by kg of water.

Question 2 Marks Q.14. An aqueous solution of 2% non-volatile exerts a pressure of 1.004 Bar at the normal boiling point of the solvent. What is the molar mass of the solute ?

Solution. Hint : (PA0 − PA)/PA0 = (wB × mA)/(mB × wA)
(1.013 − 1.004)/1.013 = (2 × 18)/(mB × 98)
mB = 41.35 gm/mol

Teacher's Note: 2% means 2 g solute in 98 g water; pure solvent pressure at normal b.p. is 1.013 bar (verified: 41.35).

Exam Note: Pure solvent pressure = 1.013 bar at normal b.p.

Question 2 Marks Q.15. Why is it advised to add ethylene glycol to water in a car radiator in hill station ?

Solution. Hint : Anti-freeze.

Teacher's Note: It depresses the freezing point so the coolant does not freeze.

Exam Note: Use term anti-freeze, link to freezing point.

Question 2 Marks Q.16. Calculate the molarity of pure water (d = 1 g mL−1).

Solution. Density of water = 1 g mL−1
Mass of 1000 ml of water = V × d = 1000 mL × 1 g mL−1 = 1000 g
Moles of water = 1000/18 = 55.55 mol
Now, moles of H2O present in 1000 mL or 1 L of water. So, molarity = 55.55 M

Teacher's Note: Volume 1 L gives 1000 g; divide by 18 g/mol.

Exam Note: Show mass, moles, then molarity.

Question 2 Marks Q.18. The dissolution of ammonium chloride in water is endothermic process. What is the effect of temperature on its solubility ?

Solution. Since dissolution of NH4Cl in water is endothermic process, its solubility increases with rise in temperature (i.e., Le-Chatelier process).

Teacher's Note: Heat acts as a reactant, so raising temperature favours dissolution.

Exam Note: Apply Le Chatelier’s principle.

Question 2 Marks Q.19. Two liquids A and B boil at 145ºC and 190ºC respectively. Which of them has higher vapour pressure at 80ºC ?

Solution. Lower the boiling point more volatile is the respective compound. Therefore, liquid A will have higher vapour pressure at 80ºC.

Teacher's Note: Lower boiling point means weaker intermolecular forces and higher vapour pressure.

Exam Note: Link low b.p. with high vapour pressure.

Question 2 Marks Q.20. Why is liquid ammonia bottle first cooled in ice before opening it ?

Solution. At room temperature, the vapour pressure of liquid ammonia is very high. On cooling vapour pressure decreases, therefore the liquid ammonia will not splash out.

Teacher's Note: Cooling reduces the pressure inside the bottle.

Exam Note: Explain through vapour pressure reduction.

Question 2 Marks Q.21. Which colligative property is preferred for the molar mass determination of macromolecules ?

Solution. Osmotic pressure measurement is preferred for molar mass determination because :
(a) even in dilute solution the osmotic pressure values are appreciably high and can be measured accurately.
(b) osmotic pressure can be measured at room temperature.

Teacher's Note: Other colligative effects are too small for large molar mass solutes.

Exam Note: Name osmotic pressure with both reasons.

Question 2 Marks Q.22. Define osmotic pressure determined from the measurement of osmotic pressure of a solution.

Solution. Osmotic pressure : The excess pressure applied to solution side to stop the process of osmosis is known as osmotic pressure.
π ∝ C, π ∝ T, so π ∝ CT, π = CRT
π = (nB/V) RT = (nB/(MBV)) RT
MB = nBRT/(πV)

Teacher's Note: The printed derivation gives molar mass from π, with nB taken as wB/MB.

Exam Note: Define osmotic pressure and give π = CRT.

Short Answer-II Type Questions (3 Marks)

Question 3 Marks Q.1. Determine the amount of CaCl2 dissolved in 2.5L at 27ºC such that its osmotic pressure is 0.75 atm at 27ºC. (i for CaCl2 = 2.47)

Solution. i = 2.47; π = iCRT = i (nB/V) RT
0.75 = 2.47 × nB × 0.082 × 300 / 2.5
nB = 0.75 × 2.5/(2.47 × 0.082 × 300) = 0.0308 mol
Amount = 0.0308 mol × 111 g mol−1 = 3.418 g

Teacher's Note: Exact arithmetic gives about 3.42 g; use T = 300 K and M = 111.

Exam Note: Convert °C to K and include i.

Question 3 Marks Q.2. Determine the osmotic pressure of a solution prepared by dissolving 25 mg of K2SO4 in 2 litre of water at 25ºC assuming that it is completely dissociated.

Solution. K2SO4 → 2K+ + SO42−, i = 3
Mol mass of K2SO4 = 2×39 + 32 + 4×16 = 174 g mol−1
π = iCRT = i WBRT/(MBV) = 3×25×10−3×0.082×298/(174×2.0) = 5.27 × 10−3 atm

Teacher's Note: 25 mg = 0.025 g; i = 3 from complete dissociation (verified 5.27×10−3).

Exam Note: Convert mg to g and use T = 298 K.

Question 3 Marks Q.3. If the solubility product of CuS is 6 × 10−16, calculate the maximum molarity of CuS in aqueous solution.

Solution. Ksp of CuS = 6 × 10−16. If S is the solubility, then CuS ⇌ Cu2+ + S2−; [Cu2+] = S, [S2−] = S
Ksp = [Cu2+][S2−] = S × S = S2
S = √Ksp = √(6×10−16) = 2.45 × 10−8 M
Highest molarity = 2.45 × 10−8 M

Teacher's Note: The book prints the root as √(6×10−6), a typo; √(6×10−16) = 2.45×10−8 (verified).

Exam Note: 1:1 salt: S = √Ksp.

Question 3 Marks Q.4. Suggest the most important type of intermolecular attractive interaction in the following pairs : (a) n-hexane and n-octane (b) I2 and CCl4 (c) NaClO4 and water

Solution. (a) Vander Waals interaction
(b) Vander Waals interaction
(c) Ion-dipole interaction

Teacher's Note: Non-polar pairs: London forces. Ionic solid in polar water: ion–dipole.

Exam Note: Match polarity of each pair to interaction.

Question 3 Marks Q.5. The vapour pressure of water is 12.3 Kpa at 300K. Calculate vapour pressure of 1 molal solution of a non-volatile solute in it.

Solution. Mole fraction of solute = 1/(1 + 1000/18) = 0.0177
(P0 − PA)/P0 = 0.0177
(12.3 − PA)/12.3 = 0.0177
PA = 12.08 Kpa

Teacher's Note: 1 molal means 1 mol in 1000 g (55.56 mol) water; relative lowering equals solute mole fraction (verified).

Exam Note: Use relative lowering = mole fraction of solute.

Question 3 Marks Q.6. 6.90M solution of KOH in water contains 30% by mass of KOH. Calculate the density of the KOH solution. (Molar mass of KOH = 56 g mol−1)

Solution. Mass of KOH = 30 g (in 100 g solution)
M = (WB/(MB×V(ml))) × 1000 = (30/(56×V)) × 1000
6.90 = 30×1000/(56×V)
V = 30×1000/(56×6.90) = 77.64 mL
D = M/V = 100/77.64 = 1.29 g mL−1
Corrected: the book prints V = 81.43 mL and D = 1.28 g mL−1, but 30000/(56×6.90) = 77.64 mL, so the density is 1.29 g mL−1 (check: d = M×MB/(10×P) = 6.90×56/300 = 1.288).

Teacher's Note: Assume 100 g solution; find its volume from molarity.

Exam Note: Take 100 g solution; recheck arithmetic.

Question 3 Marks Q.7. An anti-freeze solution is prepared from 222.6 g of ethylene glycol C2H4(OH)2 and 200 g of water. Calculate the molality of the solution. If the density of this solution be 1.072 g mL−1, what will be the molarity of the solution ?

Solution. MB of C2H4(OH)2 = 62 g mol−1
Molality = (WB/(MB×WA)) × 1000 = 222.6×1000/(62×200) = 17.95 m
Volume = Mass/Density = 422.6/1.072 = 394.22 ml
M = (nB/V) × 1000 = 222.6×1000/(394.22×62) = 9.11 M

Teacher's Note: Molality uses solvent mass; molarity needs total mass over density for volume.

Exam Note: Total mass 422.6 g gives volume; show both.

Question 3 Marks Q.8. What would be the molar mass of compound if 6.21 g of it is dissolved in 24.0 g of CHCl3 from a solution that has a boiling point of 68.04ºC. The boiling point of pure chloroform is 61.7ºC and the boiling point elevation constant Kb for chloroform is 3.63ºC/m.

Solution. Elevation in boiling point ΔTb = 68.04 − 61.7 = 6.34ºC
WB = 6.21 g, WA = 24.0 g, Kb = 3.63 ºC/m
MB = Kb×WB×1000/(ΔTb×WA) = 3.63×6.21×1000/(6.34×24) = 148.15 g mol−1

Teacher's Note: The book first writes 6.31 but uses 6.34 (the right difference) in the final working.

Exam Note: Subtract boiling points carefully, 6.34.

Question 3 Marks Q.9. A solution of glycerol (C3H8O3) in water was prepared by dissolving some glycerol in 500 g of water. This solution has a boiling point of 100.42ºC while pure water boils at 100ºC. What mass of glycerol was dissolved to make the solution ? (Kb = 0.512 K kg mol−1)

Solution. 37.73 g

Teacher's Note: m = 0.42/0.512 = 0.820; 0.410 mol in 0.5 kg; × 92 g/mol (verified).

Exam Note: Molality, then moles in 0.5 kg, then mass.

Question 3 Marks Q.10. 18 g of glucose (C6H12O6) (molar mass = 180 g mol−1) is dissolved in 1 kg of water in a sauce pan. At what temperature will this solution boil ? (Kb for water = 0.52 K kg mol−1, boiling point of pure water = 373.1 K)

Solution. 373.202 K
Corrected: m = 18/180 = 0.1 mol/kg; ΔTb = 0.52 × 0.1 = 0.052 K; boiling point = 373.1 + 0.052 = 373.152 K (the printed 373.202 K does not follow from the data given).

Teacher's Note: Glucose is non-electrolyte so i = 1; add ΔTb to 373.1 K.

Exam Note: Add 0.052 K to the given boiling point.

Long Answer Type Questions (5 Marks)

Question 5 Marks Q.1. (a) Define Raoult’s law of binary solution containing non-volatile solute in it.
(b) On dissolving 3.24 g of sulphur in 40 g of benzene, boiling point of solution was higher than that of benzene by 0.81K (Kb = 2.53 K kg mol−1). What is molecular formula of sulphur ? (Atomic mass S = 32 g mol−1)

Solution. (a) At a given temperature, the vapour pressure of a solution containing non-volatile solute is directly proportional to the mole fraction of the solvent.
(b) MB = Kb×WB×1000/(ΔTb×WA) = 2.53×3.24×1000/(0.81×40) = 253 g mol−1
Let the molecular formula of sulphur = Sx; molecular mass = 32x = 253; x = 7.91 ≈ 8
Molecular formula of sulphur = S8
Corrected: the book’s printed working for (b) repeats the figures of another problem (3.63, 6.21, 6.34, 24, 148.15); the correct substitution for this problem is shown above and gives the same 253 and S8 (verified).

Teacher's Note: Find molar mass from ΔTb, divide by 32 for atoms.

Exam Note: Give law statement; round x to whole number 8.

Question 5 Marks Q.2. (a) Outer shells of two eggs are removed. One of the egg is placed in pure water and the other is placed in saturated solution of NaCl. What will be observed and why ?
(b) A solution prepared by dissolving 8.95 mg of a gene fragment in 35.0 ml of water has an osmotic pressure of 0.335 torr at 25ºC. Assuming the gene fragment is a non-electrolyte, determine the molar mass.

Solution. (a) In pure water the egg swells and in saturated solution of NaCl it will shrinks.
(b) Mass of gene fragment = 8.95 mg = 8.95 × 10−3 g; volume = 35.0 ml = 35 × 10−3 L; π = 0.335 torr = 0.335/760 atm; T = 298 K
π = WBRT/(MB×V)
0.335/760 = 8.95×10−3×0.0821×298/(MB×35×10−3)
MB = 14193 g mol−1
Corrected: the book prints MB = 141933 g mol−3; solving the same equation gives 1.42 × 104 g mol−1 (about 14193), a factor of 10 smaller.

Teacher's Note: Water enters the egg (endosmosis) in water; leaves in brine (exosmosis). Convert torr to atm.

Exam Note: Convert torr to atm; state swelling and shrinking.

Question 5 Marks Q.3. (a) Define van’t Hoff factor.
(b) Calculate the freezing point depression expected for 0.0711M aqueous solution of Na2SO4. If this solution actually freezes at − 0.320ºC, what would be the value of van’t Hoff factor ? (Kf = 1.86ºC mol−1)

Solution. (a) Van’t Hoff factor : It is the ratio of the normal molar mass to the observed molar mass of the solute.
(b) ΔTf = Kf × M = 1.86 × 0.0711 = 0.132
Observed freezing point depression = 0 − (− 0.320) = 0.320ºC
i = Observed/Calculated = 0.320/0.132 = 2.42

Teacher's Note: Calculated depression assumes no dissociation; i compares observed to this value (verified 2.42).

Exam Note: Give i as observed over calculated ΔTf.

Question 5 Marks Q.4. (a) What is the value of i when solute is associated and dissociated ?
(b) Calculate the freezing point of an aqueous solution containing 10.50 g of MgBr2 in 200 g of water. (Molar mass of MgBr2 = 184, Kf = 1.86 K kg mol−1)

Solution. (a) i < 1 when solute is associated and i > 1 when solute is dissociated.
(b) m = (nB×1000)/WA = 10.50×1000/(184×200) = 0.2853 m
MgBr2 → Mg2+ + 2Br−, i = 3
ΔTf = i × Kf × m = 3 × 1.86 × 0.2853 = 1.59
Freezing point = 0 − 1.59ºC = − 1.59ºC

Teacher's Note: Three ions per formula unit; subtract ΔTf from 0°C (verified 1.59).

Exam Note: Use i = 3; answer is −1.59°C.

Question 5 Marks Q.5. (a) What is the value of i for Al2(SO4)3 when it is completely dissociated ?
(b) Calculate the boiling point of a solution prepared by adding 15.00 g of NaCl to 250 g of water. (Kb = 0.512 K kg mol−1 and molar mass of NaCl = 58.44 g mol−1)

Solution. (a) Al2(SO4)3 → 2Al3+ + 3SO42−, i = 5
(b) NaCl → Na+ + Cl−, i = 2
ΔTb = iKb×1000×WB/(WA×MB) = 2×0.512×1000×15/(250×58.44) = 1.05
Boiling point of solution = 100 + 1.05 = 101.05ºC

Teacher's Note: Count all ions: 2 + 3 = 5; NaCl gives 2 (verified 101.05°C).

Exam Note: Add ΔTb to 100°C.

Pradeep's KL Gogia Solutions for Class 12 Mathematics: Pradeep's KL Gogia Solutions Class 12 Chemistry Chapter 2 Solution

Download Pradeep's KL Gogia Solutions for Class 12

Explore reliable mathematical solutions for Pradeep's KL Gogia Solutions Class 12 Chemistry Chapter 2 Solution tailored for Class 12 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.

Mastering Core Concepts with Pradeep's KL Gogia Solutions

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Complete Your Class 12 Exam Preparation

In addition to these Pradeep's KL Gogia Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.

FAQs

What are these Pradeep's KL Gogia Solutions for Class 12 Chemistry?

They are chapter-wise solved questions from the Pradeep&#039;s KL Gogia book for Class 12 Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the Pradeep's KL Gogia Class 12 Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these Pradeep's KL Gogia solutions for Class 12 Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising Pradeep's KL Gogia Class 12 Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 12 Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.