Step-by-Step Solutions for Class 12 Chemistry Chapter 01 The Solid State
Review structured textbook solutions for Class 12 Chemistry Chapter 01 The Solid State prepared by . Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.
Download Chapter 01 The Solid State Textbook Solutions PDF
Navigate directly to the solved Chemistry textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.
Very Short Answer Questions
Question 1. Why does the window glass of the old buildings look milky? [CBSE (F) 2016]
Solution.
It is due to heating during the day and cooling at night, i.e., due to annealing over a number of years, glass acquires crystalline character.
Teacher's Note: Old window glass looks milky since slow heating and cooling gives it crystalline character.
Exam Note: Mention annealing and crystalline character.
Question 2. ‘Crystalline solids are anisotropic in nature.’ What does this statement mean? [CBSE Delhi 2011; (F) 2011]
Solution.
. It means that some of their physical properties like electrical conductivity, refractive index, etc., are different in different directions.
Teacher's Note: Anisotropic means physical properties such as refractive index differ with direction.
Exam Note: Explain with an example property.
Question 3. What type of interactions hold the molecules together in a polar molecular solid? [CBSE (AI) 2010]
Solution.
The interactions which hold the molecules together in a polar molecular solid are dipole-dipole attractions.
Teacher's Note: Polar molecular solids are held by dipole-dipole attractions.
Exam Note: Name the interaction.
Question 4. Write a feature which will distinguish a metallic solid from an ionic solid. [CBSE Delhi 2010; (F) 2010]
Solution.
Metals are malleable and ductile whereas ionic solids are hard and brittle.
Teacher's Note: Metals are malleable and ductile, whereas ionic solids are hard and brittle.
Exam Note: Give one distinguishing feature.
Question 5. Give an example each of a molecular solid and an ionic solid. [CBSE Central 2016]
Solution.
Molecular solids: CO2, I2, HCl
Ionic solids: NaCl, ZnS, CaF2
Teacher's Note: CO2 or iodine are molecular solids, and sodium chloride is a common ionic solid.
Exam Note: Give one example each.
Question 6. What is the two-dimensional coordination number of a molecule in a square close-packed layer? [CBSE (F) 2013]
Solution.
4.
Teacher's Note: The two-dimensional coordination number in a square close-packed layer is four.
Exam Note: Give the number.
Question 7. Which crystal defect lowers the density of a solid? [CBSE Delhi 2009, 2010; (AI) 2009]
Solution.
Schottky defect.
Teacher's Note: Schottky defect reduces the density of a solid.
Exam Note: Name the defect.
Question 8. Which point defect in crystals does not alter the density of the relevant solid? [CBSE Delhi 2009, 2010]
Solution.
Frenkel defect.
Teacher's Note: Frenkel defect leaves density unchanged because no ion leaves the crystal.
Exam Note: Name the defect.
Question 9. Which point defect in its crystal units increases the density of a solid? [CBSE Delhi 2009, 2011; (AI) 2012]
Solution.
Interstitial defect.
Teacher's Note: Interstitial defect increases density by adding extra atoms.
Exam Note: Name the defect.
Question 10. What type of stoichiometric defect is shown by AgCl? [CBSE Delhi 2013]
Solution.
Frenkel defect.
Teacher's Note: Silver chloride shows the Frenkel defect.
Exam Note: Name the defect.
Question 11. What is meant by the term ‘forbidden zone’ in reference to band theory of solids? [CBSE (F) 2012]
Solution.
The energy gap between valence band and conduction band is known as forbidden zone.
Teacher's Note: The forbidden zone is the energy gap between valence and conduction bands.
Exam Note: Define as energy gap.
Question 12. What type of semiconductor is obtained when silicon is doped with arsenic? [CBSE (AI) 2010]
Solution.
n-type semiconductor.
Teacher's Note: Silicon doped with arsenic becomes an n-type semiconductor.
Exam Note: Name the type.
Question 13. What would be the nature of solid if there is no energy gap between valence band and conduction band? [CBSE East 2016]
Solution.
Conductor.
Teacher's Note: With no energy gap the solid behaves as a conductor.
Exam Note: Name the type of solid.
Question 14. What is meant by an ‘intrinsic semiconductor’? [CBSE (F) 2011]
Solution.
Pure substances exhibiting conductivity similar to that of silicon and germanium are called intrinsic semiconductors.
Teacher's Note: Intrinsic semiconductors are pure materials such as silicon and germanium.
Exam Note: Define with examples.
Question 15. What type of substances would make better permanent magnets, ferromagnetic or ferrimagnetic? [CBSE Delhi 2013]
Solution.
Ferromagnetic.
Teacher's Note: Ferromagnetic substances make better permanent magnets.
Exam Note: Choose ferromagnetic.
Question 16. A metallic element crystallises into a lattice having a pattern of AB AB…… and packing of spheres leaves out voids in the lattice. What type of structure is formed by this arrangement? [CBSE Delhi 2017 C]
Solution.
hcp.
Teacher's Note: An ABAB layer pattern means hexagonal close packing.
Exam Note: Name the structure.
Question 17. What type of stoichiometric defect is shown by ZnS?
Solution.
. ZnS shows Frenkel defect as its ions have a large difference in size.
Teacher's Note: Zinc sulphide shows Frenkel defect because its ions differ greatly in size.
Exam Note: Name the defect and reason.
Question 18. What kind of attractive forces are present in the molecular crystalline solids?
Solution.
Dispersion forces, dipole–dipole interactions and hydrogen bonds.
Teacher's Note: Molecular solids have dispersion forces, dipole-dipole interactions and hydrogen bonds.
Exam Note: List all three forces.
Question 19. How can a material be made amorphous?
Solution.
By melting the material and then cooling it rapidly.
Teacher's Note: Melting the substance and cooling it quickly makes it amorphous.
Exam Note: Mention rapid cooling of a melt.
Question 20. Why is the window glass of old buildings thick at the bottom?
Solution.
Glass is not a true solid but a supercooled liquid of high viscosity (called pseudo- solid). It has the property to flow.
Teacher's Note: Glass is a supercooled liquid that flows slowly, so old windowpanes are thicker at the bottom.
Exam Note: Mention flow of glass over time.
Question 21. What are primitive unit cells and what are non-primitive unit cells?
Solution.
. Primitive unit cells have one atom per unit cell. On the other hand, non-primitive unit cells have more than one atom per unit cell.
Teacher's Note: Primitive cells contain one lattice point, while non-primitive cells contain more than one.
Exam Note: Contrast the two.
Question 22. Define face-centred cubic structure.
Solution.
. A face-centred cubic structure has one atom at each corner and one atom at each face centre.
Teacher's Note: A face-centred cubic cell has atoms at all corners and at each face centre.
Exam Note: Describe the positions.
Question 23. Define void.
Solution.
The empty spaces present between the atoms or the ions when they are packed within the crystal are called voids.
Teacher's Note: Voids are the empty spaces left between packed atoms or ions.
Exam Note: Define in one line.
Question 24. What is the coordination number of a particle present in an octahedral void?
Solution.
Six.
Teacher's Note: A particle in an octahedral void has coordination number six.
Exam Note: Give the number.
Question 25. How many effective sodium ions are located at the edge centre of a unit cell in a sodium chloride crystal?
Solution.
𝐀𝐧𝐬. 12 × 1 4 = 3.
Teacher's Note: Edge-centre ions in sodium chloride are shared among four cells, so twelve edges give three.
Exam Note: Show the edge sharing count.
Question 26. What is the meaning of the term imperfection in solids?
Solution.
Imperfection refers to the irregularities in the arrangement of atoms, ions or molecules in the structure of crystalline substances.
Teacher's Note: Imperfection means irregularity in the arrangement of crystal particles.
Exam Note: Define in one sentence.
Question 27. In spite of long range order in the arrangement of particles, why are the crystals usually not perfect? [NCERT Exemplar]
Solution.
Crystals have long range repeated pattern of arrangement of constituent particles but in the process of crystallisation some deviations from the ideal arrangement (i.e., defects) may be introduced. That is why crystals are usually not perfect.
Teacher's Note: Crystals are not perfect because defects enter during crystallisation.
Exam Note: Mention deviations introduced while crystallising.
Question 28. What are the types of lattice imperfections found in crystals?
Solution.
(a) Stoichiometric defects, viz., Schottky defect and Frenkel defect (b) Non- stoichiometric defects, viz., metal excess, metal deficiency, and (c) impurity defects.
Teacher's Note: Imperfections are stoichiometric, non-stoichiometric and impurity defects.
Exam Note: List the three types with examples.
Question 29. What are interstitials in a crystal?
Solution.
Atoms or ions that fill the normal vacant interstitial voids in a crystal are called interstitials.
Teacher's Note: Interstitials are atoms or ions occupying the interstitial voids of a crystal.
Exam Note: Define in one line.
Question 30. What is the non-stoichiometric defect in crystals?
Solution.
If, as a result of the imperfections in the crystal, the ratio of the cations to the anions becomes different from that indicated by the ideal chemical formula, then the defects are termed as non-stoichiometric defects.
Teacher's Note: A non-stoichiometric defect makes the cation-to-anion ratio differ from the ideal formula.
Exam Note: Define with the changed ratio.
Question 31. What is Schottky defect?
Solution.
When equal numbers of cations and anions are missing from their lattice sites, so that electrical neutrality and stoichiometry are maintained and the density decreases, it is called Schottky defect.
Teacher's Note: Schottky defect is the missing of equal numbers of cations and anions from the lattice, lowering the density.
Exam Note: Define with the key features.
Question 32. What is Frenkel defect?
Solution.
When some ions (usually cations) are missing from the lattice sites and they occupy the interstitial sites so that electrical neutrality as well as stoichiometry is maintained, it is called Frenkel defect.
Teacher's Note: Frenkel defect occurs when an ion leaves its site and occupies an interstitial site.
Exam Note: Define it as a dislocation defect.
Question 33. Why does Frenkel defect not change the density of AgCl crystals?
Solution.
Because of the Frenkel defect, no ion is missing from the crystal, therefore there is no change in density.
Teacher's Note: In Frenkel defect no ion leaves the crystal, so the density remains the same.
Exam Note: Say no ion is lost.
Question 34. Name the non-stoichiometric point defect responsible for colour in alkali metal halides. [CBSE Sample Paper 2016]
Solution.
Metal excess defect due to anionic vacancies.
Teacher's Note: Metal excess from anionic vacancies colours alkali halide crystals.
Exam Note: Name the defect.
Question 35. What are F-centres?
Solution.
The free electrons trapped in the anion vacancies are called F-centres.
Teacher's Note: F-centres are electrons trapped at anionic vacancies.
Exam Note: Define in one line.
Question 36. Why is FeO(s) not formed in stoichiometric composition? [NCERT Exemplar]
Solution.
In the crystals of FeO, some of the Fe2+ cations are replaced by Fe3+ ions. Three Fe2+ ions are replaced by two Fe3+ ions to make up for the loss of positive charge. Eventually there would be less amount of metal as compared to stoichiometric proportion.
Teacher's Note: Some Fe2+ ions are replaced by Fe3+, so the ratio of iron to oxygen is not exactly one.
Exam Note: Mention Fe3+ replacing Fe2+.
Question 37. What type of crystal defect is produced when sodium chloride is doped with MgCl2?
Solution.
A cation vacancy is formed, so impurity defect is produced. A substitutional solid solution is formed (because 2Na+ ions are replaced by one Mg2+ ion at the lattice site).
Teacher's Note: Doping with magnesium chloride creates cation vacancies, an impurity defect.
Exam Note: Name the defect and vacancy.
Question 38. How does the electrical conductivity of semiconductors vary with temperature?
Solution.
Electrical conductivity of semiconductors increases with increase in temperature as more electrons can jump from valence band to conduction band.
Teacher's Note: Conductivity of semiconductors rises with temperature as more electrons enter the conduction band.
Exam Note: State increase and the reason.
Question 39. Define superconductivity of a substance.
Solution.
The property of a substance to offer no resistance to the flow of electricity at a particular temperature is known as superconductivity.
Teacher's Note: Superconductivity is zero resistance to electric current at a particular temperature.
Exam Note: Define with zero resistance.
Question 40. What is the difference in the semiconductors obtained by doping silicon with Al and with P?
Solution.
Silicon doped with Al forms p-type semiconductors, while silicon doped with P produces n-type semiconductors.
Teacher's Note: Aluminium doping gives a p-type semiconductor, while phosphorus doping gives n-type.
Exam Note: Contrast both doping outcomes.
Question 41. Name the type of semiconductor obtained when silicon is doped with boron. [CBSE Sample Paper 2017]
Solution.
p-type semiconductor.
Teacher's Note: Boron doping makes silicon a p-type semiconductor.
Exam Note: Name the type.
Question 42. What is the difference between 13-15 and 12-16 compounds?
Solution.
Group 13-15 compounds, viz., AlP, GaAs, etc. have large covalent character whereas Group 12-16 compounds, viz., ZnS, CdS, HgTe, etc. do not possess covalent character but have sufficient ionic character. However, all of them are semiconductors.
Teacher's Note: Group 13-15 compounds are largely covalent, while 12-16 compounds are more ionic.
Exam Note: Contrast the bonding character.
Question 43. A solid is made up of two elements P and Q. Atoms of Q are in ccp arrangement while atoms of P occupy all the tetrahedral sites. What is the formula of the compound?
Solution.
Suppose number of atoms of Q in ccp arrangement = N
So, number of tetrahedral sites = 2 N
∴ Number of P atoms = 2 N
∴ P : Q = 2N : N = 2 : 1
Hence, formula of compound is P2Q.
Teacher's Note: Counting tetrahedral sites shows twice as many sites as atoms, so the formula has twice as many P.
Exam Note: Show ratio and formula.
Question 44. A compound is formed by two elements X and Y. Atoms of the element Y (as anions) make ccp and those of the element X (as cations) occupy all the octahedral voids. What is the formula of the compound?
Solution.
Suppose the number of atoms Y in ccp = N
∴ Number of octahedral voids = N × 1 = N
∴ Number of atoms of X = N Ratio of X : Y = N : N = 1 : 1
Hence, formula of the compound = XY
Teacher's Note: Y forms the ccp lattice and X fills octahedral voids equal in number, giving a one to one formula.
Exam Note: Show void count and formula.
Question 45. Why is Frenkel defect found in AgCl?
Solution.
This is because the cation Ag+ and anion Cl– differ in their size to a larger extent, therefore cations occupy voids due to its smaller size.
Teacher's Note: Silver and chloride ions differ greatly in size, so the small cation enters voids.
Exam Note: Give size difference as the reason.
Question 46. In NaCl crystal, Cl– ions are in fcc arrangement. Calculate the number of Cl– ions in its unit cell. HOTS]
Solution.
Cl– ions per unit cell = 8 × 1 8 (from corners) + 6 × 1 2 (From face corners) = 4
Teacher's Note: Count corners and face centres to get four chloride ions per cell.
Exam Note: Show the counting.
Question 47. A compound AB2 possesses the CaF2 type crystal structure. Write the coordination number of A2+ and B– ions in its crystals. [HOTS]
Solution.
Coordination no. of A = 8, Coordination no. of B = 4.
Teacher's Note: In a CaF2-type structure, the cation has coordination number eight and the anion four.
Exam Note: Give both numbers.
Question 48. Why does table salt, NaCl, sometimes appear yellow in colour? [NCERT Exemplar] [HOTS]
Solution.
Yellow colour in sodium chloride is due to metal excess defect due to which unpaired electrons occupy anionic sites. These sites are called F-centres. These electrons absorb some energy from the visible white light for the excitation which makes crystal appear yellow.
Teacher's Note: Metal excess with trapped electrons at anion sites (F-centres) absorbs light and makes salt look yellow.
Exam Note: Mention F-centres and light absorption.
Question 49. How does the electrical conductivity of metallic conductors vary with temperature?
Solution.
Electrical conductivity decreases with rise in temperature because kernels begin to vibrate and create hindrance in the flow of electrons.
Teacher's Note: Conductivity falls with temperature because kernels vibrate and obstruct electron flow.
Exam Note: Say decrease and give the reason.
Question 50. Express the relationship between atomic radius (r) and the edge length (a) in the bcc unit cell.
Solution.
r (atomic radius) = (√3/4) a (a = edge length of unit cell).
Teacher's Note: In bcc, atoms touch along the body diagonal, which equals 4r, so a = 4r/√3.
Exam Note: r = √3a/4.
Question 51. What is the formula of a compound in which the element Y forms ccp lattice and atoms of X occupy 2/3rd of tetrahedral voids?
Solution.
Let the number of particles of element Y in ccp lattice = N
Number of tetrahedral voids = 2N
Number of particles of element X = (2/3) × 2N = (4/3)N
X : Y = (4/3)N : N = 4 : 3
∴ Formula of the compound is X4Y3.
Teacher's Note: A ccp lattice of N atoms has 2N tetrahedral voids.
Exam Note: Tetrahedral voids = 2N.
Question 52. What is the formula of a compound in which the element P forms ccp lattice and atoms of Q occupy 2/3rd of tetrahedral voids?
Solution.
Let the number of atoms of P in ccp arrangement = N
So, number of tetrahedral voids = 2N
∴ Number of Q atoms = (2/3) × 2N = (4/3)N
Q : P = (4/3)N : N = 4 : 3
Hence, formula of the compound = Q4P3
Teacher's Note: ccp gives N atoms and 2N tetrahedral voids; two-thirds occupancy gives 4N/3.
Exam Note: Tetrahedral voids = 2N.
Question 53. What is the formula of a compound in which the element P forms hcp lattice and atoms of Q occupy 2/3rd of octahedral voids?
Solution.
Let the number of atoms of P in hcp lattice = N
So, number of octahedral voids = N
∴ Number of Q atoms = (2/3) × N = (2/3)N
Q : P = (2/3)N : N = 2 : 3
Hence, the formula of the compound is Q2P3.
Teacher's Note: hcp and ccp both have one octahedral void per atom.
Exam Note: Octahedral voids = N.
Question 54. Zinc oxide is white but it turns yellow on heating. Explain.
Solution.
On heating ZnO loses oxygen according to the following reaction: ZnO → Zn2+ + ½O2 + 2e–
Zn2+ ions are entrapped in the interstitial voids and electrons are entrapped in the neighbouring interstitial voids to maintain electrical neutrality. Due to presence of electrons in interstitial voids the colour is yellow.
Teacher's Note: Heating gives a metal excess defect; trapped electrons absorb light and colour ZnO yellow.
Exam Note: Metal excess defect.
Question 55. What type of substances exhibit antiferromagnetism?
Solution.
Substances in which domains are oppositely oriented and cancel out each other’s magnetic moments exhibit antiferromagnetism.
Teacher's Note: Equal and opposite magnetic moments of domains cancel, giving zero net magnetism.
Exam Note: Domains oppositely oriented.
Question 56. A compound formed by elements A and B has a cubic structure in which A atoms are at the corners of the cube and B atoms are at the face centres. Derive the formula of the compound.
Solution.
Number of A atoms per unit cell = 8 (at the corners) × 1/8 = 1
Number of B atoms per unit cell = 6 (at the face centres) × 1/2 = 3
A : B = 1 : 3
∴ The formula of the compound = AB3.
Teacher's Note: A corner atom is shared by 8 cells and a face atom by 2.
Exam Note: Corner 1/8, face 1/2.
Question 57. In corundum, oxide ions are arranged in hexagonal close packing and aluminium ions occupy two-third of the octahedral voids. What is the formula of corundum?
Solution.
Let the number of oxide ions in the packing be N.
Then octahedral voids = N. Therefore, Al3+ ions = (2/3) × N = 2N/3.
∴ Ratio of Al3+ : O2– = 2N/3 : N = 2 : 3
Hence, formula of corundum is Al2O3.
Teacher's Note: Octahedral voids equal the number of oxide ions; two-thirds are occupied.
Exam Note: Al2O3.
Question 58. A cubic solid is made up of two elements A and B. Atoms A are present at the corners of the cube and B are at the alternate face centres. What is the formula of the solid?
Solution.
Number of A atoms per unit cell = 8 × 1/8 = 1
Number of B atoms per unit cell = 2 × 1/2 = 1
∴ Formula of the compound = AB
Teacher's Note: Alternate face centres means two faces, each shared by two cells.
Exam Note: Two face-centre atoms give 1.
Free study material for Chemistry
Step-by-Step Xam Idea Solutions for Class 12 Math
Chapter-wise Xam Idea Solutions: Xam Idea Solutions Class 12 Chemistry Chapter 1 The Solid State Very Short Answer Questions
Access the complete chapter-wise PDF for Xam Idea Solutions Class 12 Chemistry Chapter 1 The Solid State Very Short Answer Questions. These structured Xam Idea Solutions solutions for Class 12 Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.
Detailed Calculation Guides for Class 12
Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.
Next Steps in Your Mathematics Revision
Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.
FAQs
They are chapter-wise solved questions from the book for Class 12 Chemistry. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.