Xam Idea Solutions Class 12 Chemistry Chapter 1 The Solid State Short Answer Questions II

Official Textbook Solutions: Class 12 Chemistry Chapter 01 The Solid State

Access comprehensive textbook solutions for Chapter 01 The Solid State using the reference material for Class 12 Chemistry. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.

Chapter-wise Solutions for Chemistry: Chapter 01 The Solid State

Access the complete solution PDF for Class 12 Chemistry below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

Short Answer Questions II

Question 1. Answer the following

Based on the nature of intermolecular forces, classify the following solids: Silicon carbide, Argon

Solution.

Silicon carbide: Covalent solid

Argon: Molecular solid (non-polar)

Teacher's Note: Silicon carbide is a covalent solid and argon a non-polar molecular solid.

Exam Note: Classify each solid.

Question 2. Answer the folloing questions.

Frenkel defects are not found in alkali metal halides.

Solution.

This is because alkali metal ions have larger size which cannot fit into interstitial sites.

Q. Schottky defects lower the density of related solids.

Ans. As the number of ions decreases as a result of Schottky defect, the mass decreases whereas the volume remains the same.

Q. Impurity doped silicon is a semiconductor.

Ans. This is due to additional electron or creation of an electron hole on doping with impurity. Creation of electron hole results in p-type semiconductor whereas additional electron results in n-type semiconductor.

Teacher's Note: Alkali metal ions are too large for interstitial sites, so Frenkel defects are not found.

Exam Note: Give the size reason.

Question 3. Answer the following questions.

What type of stoichiometric defect is shown by KCl and why?

Solution.

KCl shows schottky defect as the cation, K+ and anion, Cl– are of almost similar sizes.

Q. What type of semiconductor is formed when silicon is doped with As?

Ans. n-type semiconductor.

Teacher's Note: Potassium chloride shows the Schottky defect because its ions are similar in size.

Exam Note: Name the defect and the size reason.

Question 4. Examine the given defective crystal: X+ Y– X+ Y– X+ Y– Z2+ Y– X+ Y– X+ Y– Y– X+ Y– X+ Y– X+ Y– (a) Write the term used for this type of defect. (b) What is the result when XY crystal is doped with divalent (Z2+) impurity? [CBSE (F) 2017]

Solution.

i. Impurity defect. Each Z2+ replaces two X+ ions. It occupies the site of one X+ ion and other site ii. remain vacant. The vacancies results in the higher electrical conductivity of the solid.

Teacher's Note: The impurity defect arises when a divalent ion replaces two monovalent ones, leaving vacancies that raise conductivity.

Exam Note: Name the defect and the vacancy effect.

Question 5. Examine the given defective crystal: X+ Y– X+ Y– X+ Y– X+ Y– X+ Y– X+ Y– X+ e– X+ Y– X+ Y– X+ Y– Answer the following questions:

Is the above defect stoichiometric or non-stoichiometric?

Solution.

Non-stoichiometric defect Q. Write the term used for the electron occupied site.

Ans. F-centre

Q. Give an example of the compound which shows this type of defect.

[CBSE Ajmer 2015]

Ans. When crystals of NaCl are heated in an atmosphere of Na vapours or when crystals of KCl are heated in an atmosphere of K vapours.

Teacher's Note: Trapped electrons in anionic sites make it a metal excess, non-stoichiometric defect.

Exam Note: Name the defect type.

Question 6. Answer the following questions.

What type of semiconductor is obtained when Ge is doped with In?

Solution.

p-type semiconductor

Teacher's Note: Doping germanium with indium gives a p-type semiconductor.

Exam Note: Name the type of semiconductor.

Question 7. What type of magnetism is shown in the following alignment of magnetic moments? ↑ ↑ ↑ ↑ ↑ ↑

Solution.

Ferromagnetism

Teacher's Note: Parallel alignment of all moments shows ferromagnetism.

Exam Note: Name the magnetism.

Question 8. What type of point defect is produced when AgCl is doped with CdCl2?

Solution.

Impurity defect

Teacher's Note: Doping with cadmium chloride creates an impurity defect.

Exam Note: Name the point defect.

Question 9. What are the reasons of electrical conductivity in (i) metals, (ii) ionic solids, and (iii) semiconductors?

Solution.

i. It is due to flow of electrons. ii. It is due to flow of ions in solution or molten state and defects in the solid state. iii. It is due to the presence of impurities and defects.

Teacher's Note: Metals conduct by electrons, ionic solids by ions, and semiconductors through impurities and defects.

Exam Note: Match the reason to each class.

Question 10. Answer the following questions.

simple cubic unit cell?

Solution.

8 (corner atoms) × 8 (atom per unit cell) = 1

Q. body centred cubic unit cell?

Ans. 8 (corner atoms) × 8 + 1 (body centre atom) × 1 = 1 + 1 = 2

Q. face centred cubic unit cell?

Ans. 8 (corner atoms) × 8 + 6 (face centre atoms) 2 = 1 + 3 = 4

Teacher's Note: Each cubic cell has a fixed number of atoms: one, two or four for simple, body-centred and face-centred.

Exam Note: Show each atom share count.

Question 11. What is the coordination number of i. zinc in zinc blende (ZnS)? ii. oxide ion in sodium oxide (Na2O)? iii. calcium in calcium fluoride (CaF2)?

Solution.

(i) 4 (ii) 8 iii) 8

Teacher's Note: The coordination numbers are four, eight and eight as listed for the three cases.

Exam Note: List the numbers.

Question 12. Write the coordination number of each ion in the following crystals: i. ZnS ii. CaF2 iii. Na2O

Solution.

Zn2+ = 4, S2– = 4 i. Ca2+ = 8, F – = 4 ii. Na+ = 4, O2– = 8 iii.

Teacher's Note: Zinc and sulphide have coordination number four, calcium eight, fluoride four, sodium four and oxide eight.

Exam Note: Give both ions' coordination numbers per crystal.

Question 13. Iron has a body centred cubic unit cell with a cell dimension of 286.65 pm. The density of iron is 7.874 g cm–3. Use this information to calculate Avogadro’s number. (At. mass of Fe = 55.845 u)

Solution.

a = 286.65 pm = 286.65 × 10–10 cm; M = 55.845 g mol–1; d = 7.874 g cm–3

For bcc unit cell, z = 2

NA = (z × M)/(a3 × d) = (2 × 55.845)/((286.65 × 10–10)3 × 7.874)

NA = 6.022 × 1023 mol–1

Teacher's Note: Rearrange d = zM/(a³N_A) for N_A, using z = 2 for bcc.

Exam Note: N_A = zM/(a³d).

Question 14. The density of copper metal is 8.95 g cm–3. If the radius of copper atom is 127.8 pm, is the copper unit cell a simple cubic, a body-centred cubic or a face-centred cubic structure? (Given: At. mass of Cu = 63.54 g mol-1 and NA = 6.022 × 1023 mol-1)

Solution.

Suppose copper has fcc structure

∴ z = 4, a = 2√2 r

d = (z × M)/(a3 × NA) …(i)

Here, M = 63.54 g mol–1, NA = 6.022 × 1023 mol–1

a = 2√2 r = 2√2 × 127.8 pm = 3.614 × 10–8 cm

Substituting these values in the expression (i), we get d = (4 × 63.54)/((3.614 × 10–8)3 × 6.022 × 1023) = 8.94 g cm–3

As the calculated value of density (8.94 g cm–3) is in agreement with the given value (8.95 g cm–3).

Therefore, copper unit cell has face-centred cubic structure.

Teacher's Note: Assume fcc, compute the density, and compare it with the given value.

Exam Note: Calculated 8.94 matches fcc.

Question 15. The density of lead is 11.35 g cm–3 and the metal crystallises with fcc unit cell. Estimate the radius of lead atom. (At. mass of lead = 207 g mol–1 and NA = 6.02 × 1023 mol–1)

Solution.

d = (z × M)/(a3 × NA) ⇒ a3 = (z × M)/(d × NA) …(i)

For a fcc unit cell, z = 4; M = 207 g mol–1, NA = 6.02 × 1023 mol–1, d = 11.35 g cm–3

a3 = (4 × 207)/(11.35 × 6.02 × 1023) cm3, so a = 4.949 × 10–8 cm = 494.9 pm

For a fcc unit cell, r = a/(2√2) = 494.9/(2√2) pm = 174.95 pm ≈ 175 pm

Teacher's Note: For fcc, find a from density, then r = a/(2√2).

Exam Note: r = a/2√2 for fcc.

Question 16. An element crystallizes in a fcc lattice with cell edge of 400 pm. Calculate the density if 200 g of this element contain 2.5 × 1024 atoms.

Solution.

Moles of the element = atoms/NA = (2.5 × 1024)/(6.022 × 1023) = 4.15 mol

Molar mass = 200 g/4.15 mol = 48.2 g mol–1

a = 400 pm = 4 × 10–8 cm, z = 4 (fcc)

d = (z × M)/(a3 × NA) = (4 × 48.2)/((4 × 10–8)3 × 6.022 × 1023) ≈ 5.0 g cm–3

Teacher's Note: First find molar mass from atoms in 200 g, then apply the density formula.

Exam Note: d = zM/(a³N_A).

Question 17. Sodium has a bcc structure with nearest neighbour distance 365.9 pm. Calculate its density (Atomic mass of sodium = 23).

Solution.

For the bcc structure, nearest neighbour distance (d) is related to the edge (a) as d = (√3/2) a

or, a = (2/√3) d = (2/1.732) × 365.9 = 422.5 pm

For bcc structure, z = 2; for sodium, M = 23

Density, d = (z × M)/(a3 × NA) = (2 × 23)/((422.5 × 10–10 cm)3 × (6.02 × 1023 mol–1)) = 1.013 g/cm3

Teacher's Note: In bcc the nearest neighbour distance is √3a/2, which gives the edge a.

Exam Note: Nearest distance = √3a/2.

Question 18. Chromium crystallises in bcc structure. If its atomic diameter is 245 pm, find its density. Atomic mass of Cr = 52 amu and NA = 6.02 × 1023 mol–1.

Solution.

Diameter = 245 pm ∴ Radius = 245/2 pm = 122.5 pm

In a bcc structure, r = (√3/4)a or a = 4r/√3

a = (4 × 122.5)/√3 = 490/1.732 = 282.91 pm

d = (z × M)/(a3 × NA) = (2 × 52)/((282.91 × 10–10 cm)3 × 6.02 × 1023) = 7.63 g cm–3

Teacher's Note: Convert diameter to radius, find a = 4r/√3, then use the density formula.

Exam Note: Radius = 122.5 pm.

Question 19. The edge length of unit cell of a metal having molecular weight 75 g/mol is 5 Å which crystallises in cubic lattice. If the density is 2 g/cm3 then find the radius of metal atom. (NA = 6.022 × 1023)

Solution.

M = 75 g mol–1, a = 5 Å = 5 × 10–8 cm, NA = 6.022 × 1023 mol–1, d = 2 g cm–3

d = (z × M)/(a3 × NA) ⇒ z = (d × a3 × NA)/M = (2 × (5 × 10–8)3 × 6 × 1023)/75 = 2

As the metal (z = 2) has bcc structure

r = (√3/4)a = (√3/4) × 5 = (1.732 × 5)/4 = 2.165 Å = 2.165 × 10–8 cm = 216.5 pm

Teacher's Note: Find z from density; z = 2 means bcc, so r = √3a/4.

Exam Note: z = 2 means bcc.

Question 20. An element has a body-centred cubic bcc structure with a cell edge of 288 pm. The density of the element is 7.2 g/cm3. How many atoms are present in 208 g of the element?

Solution.

Density of unit cell, d = (z × M)/(a3 × NA) or M = (d × a3 × NA)/z

Here, z = 2, d = 7.2 g cm–3, NA = 6.022 × 1023 mol–1, a = 288 pm = 2.88 × 10–8 cm

M = (7.2 × (2.88 × 10–8)3 × 6.022 × 1023)/2 ≈ 51.8 g mol–1

Number of atoms in 208 g = (208/51.8) × 6.022 × 1023 ≈ 2.4 × 1024 atoms

Teacher's Note: Find molar mass from density, then multiply moles in 208 g by Avogadro number.

Exam Note: Atoms = (mass/M) × N_A.

Step-by-Step Xam Idea Solutions for Class 12 Math

Complete Math Solutions for Xam Idea Solutions Class 12 Chemistry Chapter 1 The Solid State Short Answer Questions II

Access the complete chapter-wise PDF for Xam Idea Solutions Class 12 Chemistry Chapter 1 The Solid State Short Answer Questions II. These structured Xam Idea Solutions solutions for Class 12 Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.

Step-by-Step Mathematical Explanations

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Complete Your Class 12 Exam Preparation

Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.

FAQs

What are these [current-page:node:field_author] Solutions for Class 12 Chemistry?

They are chapter-wise solved questions from the book for Class 12 Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 12 Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 12 Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 12 Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 12 Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.