Xam Idea Solutions Class 12 Chemistry Chapter 1 The Solid State Short Answer Questions I

Solutions for Class 12 Chemistry: Chapter 01 The Solid State

Review structured textbook solutions for Class 12 Chemistry Chapter 01 The Solid State prepared by . Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.

Practice Class 12 Chemistry Solutions: Chapter 01 The Solid State

Access the complete solution PDF for Class 12 Chemistry below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

Short Answer Questions I

Question 1. How will you distinguish between the following pairs of terms: [CBSE (AI) 2014]

Tetrahedral and octahedral voids

Solution.

A void surrounded by four spheres occupying the corners of tetrahedron is called a tetrahedral void. It is much smaller than the size of spheres in the close packing. A void surrounded by six spheres along the corners of an octahedral is called octahedral void. The size of the octahedral void is smaller than that of the spheres in the close packing but larger than the octahedral void.

Q. Crystal lattice and unit cell

Ans. The regular three dimensional arrangement of identical points in the space which represent how the constituent particles (atoms, ions, molecules) are arranged in a crystal is called a crystal lattice.

A unit cell is the smallest portion of a crystal lattice, which when repeated over and again in different directions produces the complete crystal lattice.

Teacher's Note: Tetrahedral voids are surrounded by four spheres and are smaller, while octahedral voids have six spheres and are larger.

Exam Note: Compare surrounding spheres and size.

Question 2. What change occurs when AgCl is doped with CdCl2? [CBSE (AI) 2013] What type of semiconductor is produced when silicon is doped with boron?

Solution.

i. A cationic vacancy is generated. ii. p-type semiconductor.

Teacher's Note: Doping silver chloride with cadmium chloride produces cationic vacancies, an impurity defect.

Exam Note: State the defect created.

Question 3. Account for the following:

Schottky defects lower the density of related solids.

Solution.

In Schottky defect as the number of ions are missing from their normal lattice sites, the mass decreases whereas the volume remains the same. Due to this the density decreases.

Q. Conductivity of silicon increases on doping it with phosphorus. Ans. This is due to availability of additional unpaired electrons on doping with phosphorous.

Teacher's Note: Schottky defect removes ions without changing volume, so the density falls.

Exam Note: Link missing ions to lower density.

Question 4. Answer the following questions.

Based on the nature of intermolecular forces, classify the following solids: [CBSE (AI) 2014] Sodium sulphate, Hydrogen

Solution.

Sodium sulphate—Ionic solid, Hydrogen—Molecular solid (non-polar)

Q. What happens when CdCl2 is doped with AgCl?

Ans. It results impurity defect. Each Cd2+ replaces two Ag+ ions. It occupies the site of one ion and the other site remains vacant.

Teacher's Note: Sodium sulphate is an ionic solid, while hydrogen is a non-polar molecular solid.

Exam Note: Classify each solid by its forces.

Question 5. Answer the following questions.

Why is Frenkel defect found in AgCl?

Solution.

Due to smaller size of Ag+ cation.

Q. What is the difference between phosphorus doped and gallium doped semiconductors?

Ans. Silicon doped with phosphorus gives n-type whereas silicon doped with gallium are p-type semiconductors.

Teacher's Note: The Ag+ ion is small, so it fits in interstitial sites, giving a Frenkel defect.

Exam Note: Name the small cation size as reason.

Question 6. In terms of band theory, what is the difference between i. a conductor and an insulator? ii. a conductor and a semiconductor?

Solution.

(i) The energy gap between the valence band and conduction band in an insulator is very large while in a conductor, the energy gap is very small or there is overlapping between valence band and conduction band.

(ii) In a conductor, there is a very small energy gap or there is overlapping between valence band and conduction band whereas in semiconductor there is always a small energy gap between them.

Teacher's Note: Insulators have a large energy gap, conductors have little or an overlapping gap, and semiconductors have a small gap.

Exam Note: Compare band gaps in each pair.

Question 7. Write the coordination number of each ion in the following crystals: i. NaCl ii. CsCl

Solution.

Na+ = 6, Cl– = 6 i. Cs+ = 8, Cl– = 8 ii.

Teacher's Note: In sodium chloride each ion has six neighbours and in caesium chloride eight.

Exam Note: Give both coordination numbers for each crystal.

Question 8. Calculate the following i. Number of NaCl units in a unit cell of NaCl. ii. Number of CsCl unit in a unit cell of CsCl. [HOTS]

Solution.

(i) Number of Na+ ions = 12 (at edge centres) × i. 4 + 1 (at body centre) × 1 = 4 Number of Cl– ions = 8 (at the corners) × 8 + 6 (at face centres) × 2 = 4 ∴ umber of NaCl units per unit cell (z) = 4 Number of Cs+ ion = 1 (at the body centre) × 1 = 1Number of Cl– ions = 8 (at the ii. corners) × 8 = 1 ∴ umber of CsCl units per unit cell (z) = 1

Teacher's Note: Count each atom's share in the cell to get four formula units for NaCl and one for CsCl.

Exam Note: Show the counting of corner, face and edge sharing.

Question 9. Calculate the following i. Number of ZnS units in a unit cell of ZnS. ii. Number of CaF2 units in a unit cell of CaF2. [HOTS]

Solution.

(i) Number of Zn2+ ions = 4 (within the body) × 1 = 4 Number of S2– ions = 8 (at the corners) × 8 + 6 (at face centres) × 2 = 4 ∴ umber of ZnS units per unit cell (z) = 4

(ii) Number of Ca2+ ions = 8 (at the corners) × 8 + 6 (at face centres) × 2 = 4 Number of F– ions = 8 (within the body) × 1 = 8 Number of CaF2 ions per unit cell (z) = 4.

Teacher's Note: Zinc sulphide and calcium fluoride units per cell follow from counting ions within the cell.

Exam Note: Show the count of ions per cell.

Question 10. An element with density 11.2 g cm–3 forms a f.c.c. lattice with edge length of 4 × 10–8 cm. Calculate the atomic mass of the element. (Given: NA = 6.022 × 1023 mol–1)

Solution.

For fcc lattice number of atoms per unit cell, z = 4

Here, d = 11.2 g cm–3, a = 4 × 10–8 cm, NA = 6.022 × 1023 mol–1

Atomic mass, M = (d × a3 × NA)/z = (11.2 × (4 × 10–8)3 × 6.022 × 1023)/4 = 107.9 g mol–1 or 107.9 u

Teacher's Note: Use M = d a³ N_A / z with z = 4 for fcc.

Exam Note: M = d a³ NA / z.

Question 11. Tungsten crystallises in body centred cubic unit cell. If the edge of the unit cell is 316.5 pm, what is the radius of tungsten atom?

Solution.

a = 316.5 pm

For bcc unit cell, r = (√3/4) a

r = (√3/4) × 316.5 pm = 137.04 pm

Teacher's Note: In bcc, atoms touch along the body diagonal, so r = √3a/4.

Exam Note: r = √3a/4.

Question 12. Calculate the efficiency of packing in case of a metal crystal for simple cubic (with the assumption that atoms are touching each other).

Solution.

Packing efficiency = (z × volume of one atom)/(volume of cubic unit cell) × 100 = (z × (4/3)πr3)/a3 × 100

For a simple cubic lattice, a = 2r and z = 1

∴ Packing efficiency = (1 × (4/3)πr3)/(2r)3 × 100 = (π/6) × 100 = 52.36% = 52.4%

Teacher's Note: Simple cubic: one atom per cell, edge 2r, so volume fraction is π/6.

Exam Note: 52.4%.

Question 13. If three elements A, B and C crystallise in a cubic solid lattice with A atoms at the corners, B atoms at the cube centres and C atoms at the centre of the faces of the cube, then write the formula of the compound.

Solution.

Number of A atoms = 8 × 1/8 = 1

Number of B atoms = 1 (body centre)

Number of C atoms = 6 × 1/2 = 3

Hence, the formula of the compound is ABC3.

Teacher's Note: Corners count 1/8, face centres 1/2, and the body centre counts fully.

Exam Note: Corner 1/8, face 1/2, body 1.

Question 14. A crystalline solid has a cubic structure in which tungsten (W) atoms are located at cube corners of the unit cell, oxygen atoms at the cube edges and sodium atom at the centre. What is the molecular formula of the compound?

Solution.

Number of W atoms per unit cell = 8 (at the corners) × 1/8 = 1

Number of O atoms per unit cell = 12 (at the edge centres) × 1/4 = 3

Number of sodium atoms per unit cell = 1 (at the cube centre) × 1 = 1

Hence, the formula of the compound = NaWO3

Teacher's Note: An edge atom is shared by four cells, so 12 edges give 3 atoms.

Exam Note: Edge atom counts 1/4.

Question 15. In a cubic close packed structure of a mixed oxide one-eighth of tetrahedral voids are occupied by divalent ions X2+, while one half of the octahedral voids are occupied by trivalent ions Y3+. What is the formula of the compound?

Solution.

Let the number of O2– ions in the crystal = N

∴ Number of tetrahedral voids = 2N; number of octahedral voids = N

∴ Number of X2+ ions = (1/8) × 2N = N/4

Number of Y3+ ions = (1/2) × N = N/2

X2+ : Y3+ : O2– = N/4 : N/2 : N = 1 : 2 : 4

Hence, the formula of the compound is XY2O4.

Teacher's Note: Ccp gives 2N tetrahedral and N octahedral voids per N anions.

Exam Note: Voids: tetrahedral 2N, octahedral N.

Question 16. The radius of an atom of an element is 75 pm. If it crystallizes as a body-centred cubic lattice, what is the length of the side of the unit cell?

Solution.

For bcc, a = (4/√3) r = (4/√3) × 75

= (4/√3) × 75 × (√3/√3) = 100 × 1.732 = 173.2 pm

Teacher's Note: In bcc, a = 4r/√3.

Exam Note: a = 4r/√3.

Question 17. Lithium metal crystal has body-centred cubic structure. Its density is 0.53 g cm–3 and its molar mass is 6.94 g mol–1. Calculate the volume of a unit cell of lithium metal. [NA = 6.023 × 1023 mol–1]

Solution.

Volume of the crystal, a3 = (z × M)/(d × NA)

a3 = (2 × 6.94)/(0.53 × 6.023 × 1023) = 4.348 × 10–23 cm3

Teacher's Note: Unit-cell volume equals z × M divided by d × N_A, with z = 2.

Exam Note: z = 2 for bcc.

Xam Idea Solutions for Class 12 Mathematics: Xam Idea Solutions Class 12 Chemistry Chapter 1 The Solid State Short Answer Questions I

Access Class 12 Mathematics Solutions

Access the complete chapter-wise PDF for Xam Idea Solutions Class 12 Chemistry Chapter 1 The Solid State Short Answer Questions I. These structured Xam Idea Solutions solutions for Class 12 Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.

Detailed Calculation Guides for Class 12

Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.

Additional Study Materials for 2026

In addition to these Xam Idea Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.

FAQs

What are these [current-page:node:field_author] Solutions for Class 12 Chemistry?

They are chapter-wise solved questions from the book for Class 12 Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 12 Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 12 Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 12 Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 12 Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.