Step-by-Step Pradeep's KL Gogia Solutions for Class 12 Physics Chapter 02 Current Electricity
Explore reliable textbook solutions for Chapter 02 Current Electricity tailored for Class 12 learners using Pradeep's KL Gogia methodologies. Utilizing these Physics answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.
Download Chapter 02 Current Electricity Textbook Solutions PDF
View or download the dedicated Chapter 02 Current Electricity solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Physics.
Current Electricity - Examples (pages 1-28)
Examples
Question 1. The potential difference applied to an X-ray tube is 5 kV and the current through it is 3.2 mA. Then the number of electrons striking the target per second is
(a) 2 × 1016 (b) 5 × 106 (c) 1 × 1017 (d) 4 × 1015
Solution. (a) i = q/t = ne/t, so n = it/e = (3.2 × 10−3 × 1)/(1.6 × 10−19) = 2 × 1016.
Teacher's Note: Current is charge per second, so electrons per second = i/e; the 5 kV value is a distractor.
Exam Note: Convert mA to A before dividing.
Question 2. A beam of electrons moving at a speed of 106 m/s along a line produces a current of 1.6 × 10−6 A. The number of electrons in the 1 metre of the beam is [CPMT 2000]
(a) 106 (b) 107 (c) 1013 (d) 1019
Solution. (b) i = q/t = q/(x/v) = nev/x, so n = ix/(ev) = (1.6 × 10−6 × 1)/(1.6 × 10−19 × 106) = 107.
Teacher's Note: Time for a charge to cross a length x is x/v, giving i = n e v / x.
Exam Note: Write i = nev/x first, then substitute.
Question 3. In the Bohr's model of hydrogen atom, the electron moves around the nucleus in a circular orbit of radius 5 × 10−11 metre. Its time period is 1.5 × 10−16 sec. The current associated is
(a) Zero (b) 1.6 × 10−19 A (c) 0.17 A (d) 1.07 × 10−3 A
Solution. (d) i = q/T = (1.6 × 10−19)/(1.5 × 10−16) = 1.07 × 10−3 A.
Teacher's Note: A revolving charge is a current: one electron charge per time period.
Exam Note: Radius is not needed; use i = e/T.
Question 4. An electron is moving in a circular path of radius 5.1 × 10−11 m at a frequency of 6.8 × 1015 revolution/sec. The equivalent current is approximately
(a) 5.1 × 10−3 A (b) 6.8 × 10−3 A (c) 1.1 × 10−3 A (d) 2.2 × 10−3 A
Solution. (c) ν = 6.8 × 1015, so T = 1/(6.8 × 1015) s and i = Q/T = 1.6 × 10−19 × 6.8 × 1015 = 1.1 × 10−3 A.
Teacher's Note: Equivalent current of an orbiting charge equals charge times frequency.
Exam Note: Use i = e × frequency directly.
Question 5. A copper wire of length 1 m and radius 1 mm is joined in series with an iron wire of length 2 m and radius 3 mm and a current is passed through the wire. The ratio of the current densities in the copper and iron wire is [MP PMT 1994]
(a) 18 : 1 (b) 9 : 1 (c) 6 : 1 (d) 2 : 3
Solution. (b) J = i/A. In series i is constant, so J ∝ 1/A. Hence Jc/Ji = Ai/Ac = (ri/rc)2 = (3/1)2 = 9/1.
Teacher's Note: Series means same current; density then depends only on cross-section area, i.e. radius squared. Lengths are irrelevant.
Exam Note: Ratio of areas uses radius squared, not radius.
Question 6. A conducting wire of cross-sectional area 1 cm2 has 3 × 1023 m−3 charge carriers. If wire carries a current of 24 mA, the drift speed of the carrier is [UPSEAT 2001]
(a) 5 × 10−6 m/s (b) 5 × 10−3 m/s (c) 0.5 m/s (d) 5 × 10−2 m/s
Solution. (b) vd = i/(neA) = (24 × 10−3)/(3 × 1023 × 1.6 × 10−19 × 10−4) = 5 × 10−3 m/s.
Teacher's Note: Apply i = neAvd; convert 1 cm² to 10−4 m².
Exam Note: Convert cm² to m² and mA to A.
Question 7. A wire has a non-uniform cross-sectional area as shown in figure (narrow at A, wider at B). A steady current i flows through it. Which one of the following statements is correct?
(a) The drift speed of electron is constant (b) The drift speed increases on moving from A to B (c) The drift speed decreases on moving from A to B (d) The drift speed varies randomly
Solution. (c) For a conductor of non-uniform cross-section, vd ∝ 1/(area of cross-section). The area increases from A to B, so the drift speed decreases from A to B.
Teacher's Note: Same current through every section, so narrower part needs faster drift: vd = i/(neA).
Exam Note: State vd ∝ 1/A to earn the mark.
Question 8. In a wire of circular cross-section with radius r, free electrons travel with a drift velocity v, when a current i flows through the wire. What is the current in another wire of half the radius and of the same material when the drift velocity is 2v?
(a) 2i (b) i (c) i/2 (d) i/4
Solution. (c) i = neAvd = neπr2v and i′ = neπ(r/2)2·2v = neπr2v/2 = i/2.
Teacher's Note: Halving radius cuts area to a quarter; doubling vd restores half. Same material keeps n constant.
Exam Note: Area scales as radius squared.
Question 9. A potential difference of V is applied at the ends of a copper wire of length l and diameter d. On doubling only d, drift velocity
(a) Becomes two times (b) Becomes half (c) Does not change (d) Becomes one fourth
Solution. (c) Drift velocity does not depend upon diameter.
Teacher's Note: vd = eE/m·τ with E = V/l; neither V nor l changed, so vd is unchanged.
Exam Note: Drift speed depends on field E = V/l only.
Question 10. A current flows in a wire of circular cross-section with the free electrons travelling with a mean drift velocity v. If an equal current flows in a wire of twice the radius, new mean drift velocity is
(a) v (b) v/2 (c) v/4 (d) None of these
Solution. (c) Using vd = i/(neA), vd ∝ 1/A, so v′ = v/4.
Teacher's Note: Twice the radius gives four times the area; same current means one-fourth drift speed.
Exam Note: Area goes as r², so factor is 4.
Question 11. Two wires A and B of the same material, having radii in the ratio 1 : 2 and carry currents in the ratio 4 : 1. The ratio of drift speeds of electrons in A and B is
(a) 16 : 1 (b) 1 : 16 (c) 1 : 4 (d) 4 : 1
Solution. (a) As i = neAvd: i1/i2 = (A1/A2)(vd1/vd2) = (r12/r22)(vd1/vd2), i.e. 4 = (1/4)(vd1/vd2), so vd1/vd2 = 16/1.
Teacher's Note: Same material means equal n; combine current ratio with area ratio to isolate drift speeds.
Exam Note: Substitute ratios step by step.
Question T1. In a neon discharge tube 2.9 × 1018 Ne+ ions move to the right each second while 1.2 × 1018 electrons move to the left per second. Electron charge is 1.6 × 10−19 C. The current in the discharge tube is [MP PET 1999]
(a) 1 A towards right (b) 0.66 A towards right (c) 0.66 A towards left (d) Zero
Solution. (b) Trick: in a discharge tube positive ions carry q units of charge in t seconds from anode to cathode and negative carriers (electrons) carry the same amount of charge from cathode to anode in t′ seconds. The current in the tube is i = q/t + q′/t′. Hence i = (2.9 × 1018 × e)/1 + (1.2 × 1018 × e)/1 = 0.66 A towards right.
Teacher's Note: Electrons moving left are equivalent to positive current to the right, so both contributions add.
Exam Note: Add ion and electron currents; direction is that of positive ions.
Question T2. If the current flowing through copper wire of 1 mm diameter is 1.1 amp, the drift velocity of electron is (Given density of Cu is 9 gm/cm3, atomic weight of Cu is 63 grams and one free electron is contributed by each atom)
(a) 0.1 mm/sec (b) 0.2 mm/sec (c) 0.3 mm/sec (d) 0.5 mm/sec
Solution. (a) 6.023 × 1023 atoms has mass = 63 × 10−3 kg. So number of atoms per m3, n = (6.023 × 1023)/(63 × 10−3) × 9 × 103 = 8.5 × 1028. vd = i/(neA) = 1.1/(8.5 × 1028 × 1.6 × 10−19 × π(0.5 × 10−3)2) = 0.1 × 10−3 m/s = 0.1 mm/s. (The book omits π in the printed expression; with π the value is 1.03 × 10−4 m/s ≈ 0.1 mm/s, verified.)
Teacher's Note: Free-electron density comes from density × Avogadro number ÷ atomic mass; then use i = neAvd.
Exam Note: Use radius 0.5 mm, convert density to kg/m³.
Question 12. Two wires of resistance R1 and R2 have temperature co-efficient of resistance α1 and α2 respectively. These are joined in series. The effective temperature co-efficient of resistance is
(a) (α1 + α2)/2 (b) √(α1α2) (c) (α1R1 + α2R2)/(R1 + R2) (d) √(R1R2α1α2)/√(R12 + R22)
Solution. (c) Suppose at t°C resistances of the two wires become R1t and R2t and equivalent resistance becomes Rt. In series Rt = R1t + R2t, with R1t = R1(1 + α1t) and R2t = R2(1 + α2t). So Rt = (R1 + R2) + (R1α1 + R2α2)t = (R1 + R2)[1 + ((R1α1 + R2α2)/(R1 + R2))t]. Hence effective temperature co-efficient is (R1α1 + R2α2)/(R1 + R2).
Teacher's Note: Series resistances add, so the effective α is a resistance-weighted average of the two.
Exam Note: Show Rt = R(1 + αt) comparison clearly.
Question 13. From the graph between current i and voltage V shown, identify the portion corresponding to negative resistance [CBSE PMT 1997]
(a) DE (b) CD (c) BC (d) AB
Solution. (b) R = ΔV/ΔI. In the graph CD has only negative slope (current falls as V rises). So in this portion R is negative.
Teacher's Note: Negative (differential) resistance means current decreases while voltage increases: the falling part of the i–V curve.
Exam Note: Identify the region with negative slope.
Question 14. A wire of length L and resistance R is stretched to get the radius of cross-section halved. What is new resistance? [NCERT 1974; CPMT 1994; AIIMS 1997; KCET 1999; Haryana PMT 2000; UPSEAT 2001]
(a) 5R (b) 8R (c) 4R (d) 16R
Solution. (d) Using R1/R2 = (r2/r1)4: R/R′ = ((r/2)/r)4, so R′ = 16R.
Teacher's Note: Volume is fixed, so halving radius quadruples length and quarters area: R ∝ 1/r4.
Exam Note: Stretching at constant volume gives R ∝ 1/r⁴.
Question 15. The V–i graph for a conductor at temperature T1 and T2 are as shown in the figure. (T2 − T1) is proportional to
(a) cos 2θ (b) sin θ (c) cot 2θ (d) tan θ
Solution. (c) For conductors resistance ∝ temperature. From figure R1 ∝ T1 ⇒ tan θ ∝ T1 ⇒ tan θ = kT1 (k = constant) …(i), and R2 ∝ T2 ⇒ tan(90° − θ) ∝ T2 ⇒ cot θ = kT2 …(ii). From (i) and (ii): k(T2 − T1) = cot θ − tan θ, so (T2 − T1) = (cos θ/sin θ − sin θ/cos θ) = (cos2θ − sin2θ)/(sin θ cos θ) = cos 2θ/(sin θ cos θ) = 2 cot 2θ ⇒ (T2 − T1) ∝ cot 2θ.
Teacher's Note: Slope of a V–i graph is resistance; resistance of a metal rises with temperature, so slopes encode T.
Exam Note: Use slope = tan of angle with i-axis.
Question 16. The resistance of a wire at 20°C is 20 Ω and at 500°C is 60 Ω. At which temperature resistance will be 25 Ω? [UPSEAT 1999]
(a) 50°C (b) 60°C (c) 70°C (d) 80°C
Solution. (d) Using R1/R2 = (1 + αt1)/(1 + αt2): 20/60 = (1 + 20α)/(1 + 500α) ⇒ α = 1/220. Again using the same formula for 20 Ω and 25 Ω: 20/25 = (1 + (1/220) × 20)/(1 + (1/220) × t) ⇒ t = 80°C.
Teacher's Note: Find α from the two given readings (referred to 0°C), then reuse it for the third resistance.
Exam Note: Use the ratio form to eliminate R0.
Question 17. The specific resistance of manganin is 50 × 10−8 Ωm. The resistance of a manganin cube having length 50 cm is
(a) 10−6 Ω (b) 2.5 × 10−5 Ω (c) 10−8 Ω (d) 5 × 10−4 Ω
Solution. (a) R = ρl/A = (50 × 10−8 × 50 × 10−2)/(50 × 10−2)2 = 10−6 Ω.
Teacher's Note: For a cube R = ρ/side, since l/A = 1/l.
Exam Note: Convert cm to m before substituting.
Question 18. A rod of certain metal is 1 m long and 0.6 cm in diameter. Its resistance is 3 × 10−3 Ω. A disc of the same metal is 1 mm thick and 2 cm in diameter, what is the resistance between its circular faces?
(a) 1.35 × 10−6 Ω (b) 2.7 × 10−7 Ω (c) 4.05 × 10−6 Ω (d) 8.1 × 10−6 Ω
Solution. (b) Using R = ρl/A: Rdisc/Rrod = (ldisc/lrod) × (Arod/Adisc) ⇒ Rdisc/(3 × 10−3) = (10−3/1) × π(0.3 × 10−2)2/π(10−2)2 ⇒ Rdisc = 2.7 × 10−7 Ω.
Teacher's Note: Same material means same ρ, so use ratio; current flows through the 1 mm thickness, area is the circular face.
Exam Note: Use radii (0.3 cm, 1 cm), not diameters.
Question 19. An aluminium rod of length 3.14 m is of square cross-section 3.14 × 3.14 mm2. What should be the radius of 1 m long another rod of same material to have equal resistance?
(a) 2 mm (b) 4 mm (c) 1 mm (d) 6 mm
Solution. (c) Using R = ρl/A ⇒ l ∝ A for equal R: 3.14/1 = (3.14 × 3.14 × 10−6)/(πr2) ⇒ r = 10−3 m = 1 mm.
Teacher's Note: Equal resistance with the same ρ needs equal l/A; set the two ratios equal.
Exam Note: Equate l/A for both rods.
Question 20. Length of a hollow tube is 5 m, its outer diameter is 10 cm and thickness of its wall is 5 mm. If resistivity of the material of the tube is 1.7 × 10−8 Ω·m then resistance of tube will be (tube cross-section: outer radius r2, wall thickness 5 mm)
(a) 5.6 × 10−5 Ω (b) 2 × 10−5 Ω (c) 4 × 10−5 Ω (d) None of these
Solution. (a) Using R = ρl/A; here A = π(r22 − r12). Outer radius r2 = 5 cm. Inner radius r1 = 5 − 0.5 = 4.5 cm. So R = 1.7 × 10−8 × 5/(π{(5 × 10−2)2 − (4.5 × 10−2)2}) = 5.6 × 10−5 Ω (approximately; exact calculation gives 5.7 × 10−5 Ω, nearest option is (a)).
Teacher's Note: Current flows along the tube through the annular cross-section: area is difference of two circles.
Exam Note: Subtract inner circle area from outer.
Question 21. If a copper wire is stretched to make it 0.1% longer, the percentage increase in resistance will be [MP PMT 1996, 2000; UPSEAT 1998; MNR 1990]
(a) 0.2 (b) 2 (c) 1 (d) 0.1
Solution. (a) In case of stretching R ∝ l2, so ΔR/R = 2Δl/l = 2 × 0.1 = 0.2 (%).
Teacher's Note: At constant volume R ∝ l²; for small changes the fractional change doubles.
Exam Note: Use ΔR/R = 2Δl/l for small stretch.
Question 22. The temperature co-efficient of resistance of a wire is 0.00125/°C. At 300 K its resistance is 1 Ω. The resistance of the wire will be 2 Ω at [MP PMT 2001; IIT 1980]
(a) 1154 K (b) 1127 K (c) 600 K (d) 1400 K
Solution. (b) Using Rt = R0(1 + αΔt): R1/R2 = (1 + αt1)/(1 + αt2). So 1/2 = (1 + (300 − 273)α)/(1 + αt2) ⇒ t2 = 854°C = 1127 K.
Teacher's Note: Convert 300 K to 27°C before using α; convert answer back to kelvin.
Exam Note: Convert between °C and K carefully.
Question 23. Equal potentials are applied on an iron and copper wire of same length. In order to have same current flow in the wire, the ratio (riron/rcopper) of their radii must be [Given that specific resistance of iron = 1.0 × 10−7 Ωm and that of copper = 1.7 × 10−8 Ωm] [MP PMT 2000]
(a) About 1.2 (b) About 2.4 (c) About 3.6 (d) About 4.8
Solution. (b) V = constant, i = constant, so R = constant. ρili/Ai = ρCulCu/ACu ⇒ ρili/ri2 = ρCulCu/rCu2 ⇒ ri/rCu = √(ρi/ρCu) = √(1.0 × 10−7/1.7 × 10−8) = √(100/17) ≈ 2.4.
Teacher's Note: Same V and i means equal resistance; with equal lengths, radius² must scale with resistivity.
Exam Note: Take square root since area ∝ r².
Question 24. Masses of three wires are in the ratio 1 : 3 : 5 and their lengths are in the ratio 5 : 3 : 1. The ratio of their electrical resistance is
(a) 1 : 3 : 5 (b) 5 : 3 : 1 (c) 1 : 15 : 125 (d) 125 : 15 : 1
Solution. (d) R = ρl/A = ρl2/V = ρl2/(m/σ) = ρσ l2/m (σ = m/V density). R1 : R2 : R3 = l12/m1 : l22/m2 : l32/m3 = 25 : 9/3 : 1/5 = 125 : 15 : 1.
Teacher's Note: Mass fixes volume (same material), so R = ρd·l²/m; compare l²/m for each wire.
Exam Note: Express R via l and mass, then ratio.
Question 25. Following figure shows cross-sections through three long conductors of the same length and material, with square cross-section of edge lengths as shown. Conductor B will fit snugly within conductor A, and conductor C will fit snugly within conductor B. Relationship between their end to end resistance is
(a) RA = RB = RC (b) RA > RB > RC (c) RA < RB < RC (d) Information is not sufficient
Solution. (a) All the conductors have equal lengths. Area of cross-section of A is {(√3 a)2 − (√2 a)2} = a2. Similarly area of cross-section of B = area of cross-section of C = a2. Hence according to formula R = ρl/A, resistances of all the conductors are equal, i.e. RA = RB = RC.
Teacher's Note: Each nested shell has cross-section a²; same ρ, l and A give equal R.
Exam Note: Compute each cross-section area by subtraction.
Question 26. Dimensions of a block are 1 cm × 1 cm × 100 cm. If specific resistance of its material is 3 × 10−7 ohm-m, then the resistance between its opposite rectangular faces is (rectangular faces are 1 cm × 100 cm; the length between them is 1 cm)
(a) 3 × 10−9 ohm (b) 3 × 10−7 ohm (c) 3 × 10−5 ohm (d) 3 × 10−3 ohm
Solution. (b) Length l = 1 cm = 10−2 m. Area of cross-section A = 1 cm × 100 cm = 100 cm2 = 10−2 m2. Resistance R = 3 × 10−7 × 10−2/10−2 = 3 × 10−7 Ω.
Teacher's Note: Take l as the distance between the chosen faces; A is the face area.
Exam Note: Identify l and A from the chosen faces.
Question 27. In the figure a carbon resistor has bands of different colours on its body (bands in order: white, brown, red, silver). The resistance of the following body is
(a) 2.2 kΩ (b) 3.3 kΩ (c) 5.6 kΩ (d) 9.1 kΩ
Solution. (d) R = 91 × 102 ± 10% ≈ 9.1 kΩ.
Teacher's Note: Colour code: white 9, brown 1, red multiplier 102, silver tolerance 10%.
Exam Note: Read digits, multiplier, tolerance in order.
Question 28. What is the resistance of a carbon resistance which has bands of colours brown, black and brown? [DCE 1999]
(a) 100 Ω (b) 1000 Ω (c) 10 Ω (d) 1 Ω
Solution. (a) R = 10 × 101 ± 20% ≈ 100 Ω.
Teacher's Note: Brown 1, black 0, brown multiplier 101; no fourth band means 20% tolerance.
Exam Note: Third band is the multiplier, not a digit.
Question 29. In the following circuit reading of voltmeter V is [MP PET 2003] (Circuit: a 2 A current enters at X and divides into two parallel branches, upper branch 4 Ω then 16 Ω in series, lower branch 16 Ω then 4 Ω in series; the voltmeter V is connected between the junction Y of the upper 4 Ω and 16 Ω and the junction Z of the lower 16 Ω and 4 Ω.)
(a) 12 V (b) 8 V (c) 20 V (d) 16 V
Solution. (a) The two branches have equal resistance (20 Ω each), so 1 A flows in each. P.d. between X and Y is VXY = VX − VY = 1 × 4 = 4 V …(i) and p.d. between X and Z is VXZ = VX − VZ = 1 × 16 = 16 V …(ii). On solving (i) and (ii), the potential difference between Y and Z, i.e. the reading of voltmeter, is VY − VZ = 12 V.
Teacher's Note: Equal branches split current equally; the voltmeter reads the difference of the potential drops to its two terminals.
Exam Note: Find drops from X to each voltmeter terminal.
Question 30. An electric cable contains a single copper wire of radius 9 mm. Its resistance is 5 Ω. This cable is replaced by six insulated copper wires, each of radius 3 mm. The resultant resistance of cable will be
(a) 7.5 Ω (b) 45 Ω (c) 90 Ω (d) 270 Ω
Solution. (a) Initially R = ρl/(π(9 × 10−3)2) …(i). Resistance of each insulated wire is R′ = ρl/(π(3 × 10−3)2) = 9R = 45 Ω. Six such wires in parallel: Req = R′/6 = (1/6) × ρl/(π(3 × 10−3)2) …(ii). On solving (i) and (ii), Req = 7.5 Ω.
Teacher's Note: Radius one-third means area one-ninth, so each wire has 9R; six in parallel divide by six.
Exam Note: Parallel identical wires: divide by number.
Question 31. Two resistance R1 and R2 provides series to parallel equivalents as n/1 then the correct relationship is
(a) (R1/R2)2 + (R2/R1)2 = n2 (b) (R1/R2)3/2 + (R2/R1)3/2 = n3/2 (c) (R1/R2) + (R2/R1) = n (d) (R1/R2)1/2 + (R2/R1)1/2 = n1/2
Solution. (d) Series resistance RS = R1 + R2 and parallel resistance RP = R1R2/(R1 + R2) ⇒ RS/RP = (R1 + R2)2/(R1R2) = n ⇒ (R1 + R2)/√(R1R2) = √n ⇒ √(R1/R2) + √(R2/R1) = √n.
Teacher's Note: Form RS/RP, then take square roots so each term becomes a ratio of square roots.
Exam Note: Take square root of both sides.
Question 32. Five resistances are combined according to the figure. The equivalent resistance between the point X and Y will be (Figure: between X and Y, a 10 Ω resistor on top, a 10 Ω from X and a 10 Ω to Y on the upper path, a 10 Ω from X and a 10 Ω to Y on the lower path, and a 20 Ω resistor connected across the two middle junctions A and B.)
(a) 10 Ω (b) 22 Ω (c) 20 Ω (d) 50 Ω
Solution. (a) The equivalent circuit can be drawn as a balanced Wheatstone bridge (10 Ω in each of the four arms, with the 20 Ω across AB). So current through AB is zero. So 1/R = 1/20 + 1/20 + 1/10 ⇒ R = 10 Ω.
Teacher's Note: Equal arm ratios make the bridge balanced, so the 20 Ω bridge resistor carries no current.
Exam Note: Check P/Q = R/S before combining.
Question 33. What will be the equivalent resistance of circuit shown in figure between points A and D? [CBSE PMT 1996] (Figure: top row A to B with three 10 Ω resistors in series; bottom row C to D with three 10 Ω resistors in series; two vertical 10 Ω resistors joining the junctions of the top and bottom rows.)
(a) 10 Ω (b) 20 Ω (c) 30 Ω (d) 40 Ω
Solution. (c) The equivalent circuit between A and D can be drawn with the middle square (10 Ω in each of its four arms) forming a balanced Wheatstone bridge, equivalent to 10 Ω. This is in series with the 10 Ω next to A and the 10 Ω next to D. So Req = 10 + 10 + 10 = 30 Ω.
Teacher's Note: Open-ended branches B and C carry no current; the square of four 10 Ω is a balanced bridge.
Exam Note: Drop dead branches, then add series parts.
Question 34. In the network shown in the figure each of resistance is equal to 2 Ω. The resistance between A and B is [CBSE PMT 1995] (Figure: a triangle CDE with centre O; the terminals A and B are at O and E; resistors lie along OC, OD, CD, CE and DE.)
(a) 1 Ω (b) 2 Ω (c) 3 Ω (d) 4 Ω
Solution. (b) Taking the portion COD outside the triangle (left), and as the resistance of each is 2 Ω, the circuit behaves as a balanced Wheatstone bridge and no current flows through CD. Hence RAB = 2 Ω. [(2 + 2) ∥ (2 + 2) = 2 Ω]
Teacher's Note: Redrawing with A at O and B at E shows a balanced bridge; the CD resistor is idle.
Exam Note: Redraw first; spot the balanced bridge.
Question 35. Seven resistances are connected as shown in figure. The equivalent resistance between A and B is [MP PET 2000] (Figure: between A and B on the top wire, two 10 Ω resistors in parallel followed by a 3 Ω; vertical resistors 5 Ω and 8 Ω, then two 6 Ω in parallel at the B end, all returning to a common bottom wire.)
(a) 3 Ω (b) 4 Ω (c) 4.5 Ω (d) 5 Ω
Solution. (b) 10 Ω ∥ 10 Ω = 5 Ω; 6 Ω ∥ 6 Ω = 3 Ω. The circuit becomes A–5 Ω–(node)–3 Ω–B on top, with 5 Ω from A to the bottom wire, 8 Ω from the middle node to the bottom wire and 3 Ω from B to the bottom wire. It is a balanced Wheatstone bridge (P/Q = R/S = 5/3), so current through the 8 Ω is zero. Req = (5 + 3) ∥ (5 + 3) = 8 ∥ 8 = 4 Ω.
Teacher's Note: First reduce parallel pairs; the 5:3 ratios on both sides balance the bridge so 8 Ω is removed.
Exam Note: Reduce parallels first, then test bridge balance.
Question 36. The equivalent resistance between points A and B of an infinite network of resistance, each of 1 Ω, connected as shown is [CEE Haryana 1996] (Figure: a ladder: 1 Ω series resistors along the top from A, a 1 Ω resistor across each rung down to the bottom wire ending at B, repeating to infinity.)
(a) Infinite (b) 2 Ω (c) (1 + √5)/2 Ω (d) Zero
Solution. (c) Suppose the effective resistance between A and B is Req. Since the network consists of infinite cells, if we exclude one cell from the chain, the remaining network has infinite cells, i.e. effective resistance between C and D will also be Req. So Req = R + (R ∥ Req) = R + R Req/(R + Req) ⇒ Req = (1/2)[1 + √5] Ω (with R = 1 Ω).
Teacher's Note: Removing one cell leaves an identical infinite ladder, giving a quadratic in Req; take the positive root.
Exam Note: Reject the negative root of the quadratic.
Question 37. Four resistances 10 Ω, 5 Ω, 7 Ω and 3 Ω are connected so that they form the sides of a rectangle AB, BC, CD and DA respectively. Another resistance of 10 Ω is connected across the diagonal AC. The equivalent resistance between A and B is
(a) 2 Ω (b) 5 Ω (c) 7 Ω (d) 10 Ω
Solution. (b) Path A–D–C: 7 Ω and 3 Ω in series = 10 Ω (CD and DA). This is in parallel with the 10 Ω diagonal AC: 10 ∥ 10 = 5 Ω. This 5 Ω is in series with BC (5 Ω): 5 + 5 = 10 Ω. Finally this 10 Ω is in parallel with AB (10 Ω): Req = (10 × 10)/(10 + 10) = 5 Ω.
Teacher's Note: Reduce from the far side: series DA+CD, parallel with diagonal, series with BC, parallel with AB.
Exam Note: Name each series/parallel step explicitly.
Question 38. The equivalent resistance between A and B in the circuit will be (Figure: seven equal resistors r. A and B are the bottom corners with C the midpoint of the base, so A–C and C–B are r each. Two upper junctions L and R are joined by an r; A–L and R–B are r each, and C is joined to L and to R by an r each.)
(a) (5/4) r (b) (6/5) r (c) (7/6) r (d) (8/7) r
Solution. (d) In the circuit, by symmetry the point C is at the mid-potential, so the circuit can be redrawn as: the two r resistors C–L and C–R in series (r + r = 2r) in parallel with the top r (L–R), giving r × 2r/(r + 2r) = 2r/3. This is in series with the side resistors: r + r + 2r/3 = 8r/3 on the upper path A–L…R–B. The bottom path A–C–B is r + r = 2r. Req = (8r/3) ∥ 2r = 8r/7. (Verified by nodal analysis: 8r/7.)
Teacher's Note: Symmetry lets the C–L and C–R arms act as a series pair across L–R; then reduce stepwise.
Exam Note: Use symmetry to simplify before series-parallel.
Question 39. In the given figure, equivalent resistance between A and B will be [CBSE PMT 2000] (Figure: Wheatstone bridge with 3 Ω and 4 Ω in the upper arms, 6 Ω and 8 Ω in the lower arms, and a 7 Ω resistor across the middle junctions.)
(a) 14/3 Ω (b) 3/14 Ω (c) 9/14 Ω (d) 14/9 Ω
Solution. (a) The given Wheatstone bridge is balanced because P/Q = R/S (3/4 = 6/8). Hence the 7 Ω carries no current and the circuit is redrawn: upper path 3 + 4 = 7 Ω in series, lower path 6 + 8 = 14 Ω in series, in parallel: Req = 7 × 14/(7 + 14) = 14/3 Ω.
Teacher's Note: Equal arm ratios 3:4 and 6:8 remove the 7 Ω bridge; combine two series paths in parallel.
Exam Note: Test balance ratio before using the middle resistor.
Question 40. In the combination of resistances shown in the figure the potential difference between B and D is zero, when unknown resistance (x) is (Figure: bridge ABCD with a battery connected across A and C; arm AB is 12 Ω and 4 Ω in series, arm BC is x, arm AD is 1 Ω and 3 Ω in series, arm DC is two 1 Ω resistors in parallel.)
(a) 4 Ω (b) 2 Ω (c) 3 Ω (d) The emf of the cell is required
Solution. (b) The potential difference across B, D will be zero when the circuit acts as a balanced Wheatstone bridge: P/Q = R/S ⇒ (12 + 4)/x = (1 + 3)/(1/2) ⇒ x = 2 Ω.
Teacher's Note: Zero potential between B and D is the balance condition; two 1 Ω in parallel give 1/2 Ω.
Exam Note: Emf is irrelevant; use ratio equality.
Question 41. A current of 2 A flows in a system of conductors as shown. The potential difference (VA − VB) will be [CPMT 1975, 76] (Figure: a diamond with D at left, C at right, A at top and B at bottom; resistors DA = 2 Ω, AC = 3 Ω, DB = 3 Ω, BC = 2 Ω; the 2 A enters at D.)
(a) +2 V (b) +1 V (c) −1 V (d) −2 V
Solution. (b) In the given circuit 2 A current divides equally at junction D along the paths DAC and DBC (each path carries 1 A, as both are 5 Ω). Potential difference between D and A, VD − VA = 1 × 2 = 2 volt …(i). Potential difference between D and B, VD − VB = 1 × 3 = 3 volt …(ii). On solving (i) and (ii), VA − VB = +1 volt.
Teacher's Note: Both paths total 5 Ω so current halves; subtract the two drops measured from D.
Exam Note: Subtract drops from the common point D.
Question 42. Three resistances each of 4 Ω are connected in the form of an equilateral triangle. The effective resistance between two corners is
(a) 8 Ω (b) 12 Ω (c) 3/8 Ω (d) 8/3 Ω
Solution. (d) Between two corners, two resistors (4 + 4 = 8 Ω) are in series, and this is in parallel with the third 4 Ω: R = 8 × 4/(8 + 4) = 8/3 Ω.
Teacher's Note: Between two corners the direct side is parallel with the other two in series.
Exam Note: Series pair first, then parallel.
Question 43. If each resistance in the figure is of 9 Ω then reading of ammeter is (Figure: a 9 V battery across nine parallel 9 Ω resistors; the ammeter is in the bottom wire with five resistors on its right-hand side.)
(a) 5 A (b) 8 A (c) 2 A (d) 9 A
Solution. (a) Main current through the battery i = 9/1 = 9 A (nine resistors in parallel, 9 V across each). Current through each resistance will be 1 A and only the 5 resistances on the right side of the ammeter contribute to passing current through the ammeter. So reading of ammeter will be 5 A.
Teacher's Note: Each parallel branch gets 9 V, so 1 A; ammeter carries only branches on its side.
Exam Note: Count branches on the ammeter side only.
Question 44. A wire has resistance 12 Ω. It is bent in the form of a circle. The effective resistance between the two points on any diameter is equal to
(a) 12 Ω (b) 6 Ω (c) 3 Ω (d) 24 Ω
Solution. (c) A diameter divides the circle into two semicircular halves, each of resistance 6 Ω, in parallel: Req = 6/2 = 3 Ω.
Teacher's Note: A diameter splits the ring into two equal 6 Ω arcs in parallel.
Exam Note: Split ring into two equal arcs in parallel.
Free study material for Physics
Pradeep's KL Gogia Solutions for Class 12 Mathematics: Pradeep's KL Gogia Solutions Physics Chapter 2 Current Electricity Part 1
Download Pradeep's KL Gogia Solutions for Class 12
Explore reliable mathematical solutions for Pradeep's KL Gogia Solutions Physics Chapter 2 Current Electricity Part 1 tailored for Class 12 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.
Concept-Driven Math Answers
Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.
Additional Study Materials for 2026
Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.
FAQs
They are chapter-wise solved questions from the Pradeep's KL Gogia book for Class 12 Physics. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.