Download Class 12 Physics Textbook Solutions: Chapter 09 Ray Optics And Optical Instruments
Explore reliable textbook solutions for Chapter 09 Ray Optics And Optical Instruments tailored for Class 12 learners using methodologies. Utilizing these Physics answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.
Access Textbook Answers and Solutions
Navigate directly to the solved Physics textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.
Short Answer Questions I
Question 1. A convex lens is placed over a plane mirror. A pin is now positioned so that there is no parallax between the pin and its image formed by this lens-mirror combination. How will you use this observation to find focal length of the lens? Explain briefly. [CBSE East 2016]
Solution.
Focal length = distance of the pin from the mirror.
Teacher's Note: With no parallax, the pin sits at the lens focus, since rays retrace their path from the mirror.
Exam Note: State the no-parallax condition and measure pin to lens.
Question 2. The following data was recorded for values of object distance and the corresponding values of image distance in the experiment on study of real image formation by a convex lens of power + 5D. One of these observations is incorrect. Identify this observation and give reason for your choice: S.No. Object distance (cm) Image distance (cm)
Solution.
Power of lens = + 5 D
Focal length of lens,
The observations at serial number (3) i.e., (object distance 35 cm and image distance 37 cm is incorrect), because if the object is placed at a distance between f and 2f its image will be formed beyond 2f, while in this observation the object and image distances, both are between f and 2f.
Teacher's Note: An object between f and 2f must give an image beyond 2f, so a reading breaking this is wrong.
Exam Note: Find f using f = 1/P, then compare readings.
Question 3. For a given position of an object, an equiconvex lens forms its real image at a distance of 60 cm from the lens. A convex mirror is now kept in between this image position and the convex lens. The final image formed by this combination coincides with the object when the distance between the convex lens and the convex mirror equals 25 cm. Calculate the radius of curvature of the convex mirror.
Solution.
Given that the image formed by the combination of convex lens and the convex mirror coincides with the object.
This means that the position of the image formed by the convex lens alone corresponds to the position of centre of curvature of the convex mirror.
Hence, the distance between the convex mirror and this image (formed by the lens) which is equal to 60–25 represents radius of curvature of the mirror.
Thus, radius of curvature of the mirror = 35 cm.
Teacher's Note: A coinciding image means rays hit the mirror normally, so the lens image sits at its centre of curvature.
Exam Note: Show reasoning, use f = R/2, give unit.
Question 4. An object AB is kept in front of a concave mirror as shown in the figure. (i) Complete the ray diagram showing the image formation of the object. (ii) How will the position and intensity of the image be affected if the lower half of the mirror's reflecting surface is painted black? [CBSE (AI) 2012]
Solution.
(i) The object lies beyond C, so the image formed is real, inverted and diminished, between C and F. A ray parallel to the axis passes through F after reflection, and a ray through C retraces its path; they meet at A′ (figure).
(ii) There is no change in the position of the image. Its intensity is reduced (to about half), because only half of the mirror surface now reflects light.
Teacher's Note: Each point of the mirror forms the whole image; covering part only removes light, not parts of the image.
Exam Note: Draw two rays; say position same, intensity reduced.
Question 5. A converging and a diverging lens of equal focal lengths are placed co-axially in contact. Find the power and the focal length of the combination. [CBSE (AI) 2010]
Solution.
Let the focal lengths of the converging and diverging lenses be +f and −f respectively.
Power of converging lens P1 = 1/f, power of diverging lens P2 = −1/f.
Power of combination P = P1 + P2 = 1/f − 1/f = 0
Focal length of combination F = 1/P = 1/0 = ∞ (infinite).
Teacher's Note: Powers of lenses in contact add algebraically, so equal and opposite powers cancel.
Exam Note: Add powers: P = 0, so f = ∞.
Question 6. Explain why white light is dispersed while passing through a prism.
Solution.
The refractive index of the prism material depends on the wavelength λ of light. It varies approximately as the inverse square of the wavelength (μ = a + b/λ²).
Accordingly the refractive index is maximum for violet (λ ≈ 4000 Å) and minimum for red (λ ≈ 7500 Å). So the deviation caused by the prism, δ = (μ − 1)A, is maximum for violet and minimum for red.
Hence, on passage through the prism, the different colours are bent by different amounts and get separated, thus causing dispersion of white light.
Teacher's Note: Different wavelengths see different refractive indices in glass, so each colour is deviated by a different angle.
Exam Note: State μ depends on λ and δ = (μ − 1)A.
Question 7. Light from a point source in air falls on a convex spherical glass surface of refractive index 1.5 and radius of curvature 20 cm. The distance of light source from the glass surface is 100 cm. At what position is the image formed? [CBSE Central 2016]
Solution.
R = +20 cm, n2 = 1.5, n1 = 1 and u = −100 cm.
Using n2/v − n1/u = (n2 − n1)/R
1.5/v − 1/(−100) = (1.5 − 1)/20
1.5/v = 0.5/20 − 1/100 = 1/40 − 1/100 = 3/200
∴ v = 100 cm
A real image is formed on the other side, 100 cm away from the surface.
Teacher's Note: Refraction at a single spherical surface uses n₂/v − n₁/u = (n₂ − n₁)/R with proper signs.
Exam Note: Substitute u = −100, R = +20 in the surface formula.
Question 8. The radii of curvature of the faces of a double convex lens are 10 cm and 15 cm. If the focal length of the lens is 12 cm, find the refractive index of the material of the lens. [CBSE Delhi 2010]
Solution.
Given R1 = 10 cm, R2 = −15 cm, f = 12 cm.
Lens maker's formula: 1/f = (n − 1)(1/R1 − 1/R2)
1/12 = (n − 1)(1/10 + 1/15) = (n − 1)(5/30)
n − 1 = (30/5) × (1/12) = 0.5
Refractive index, n = 1.5
Teacher's Note: For a double convex lens the second radius is negative in the sign convention, so the terms add.
Exam Note: Use lens maker's formula with R2 = −15 cm.
Question 9. Calculate the distance d, so that a real image of an object at O, 15 cm in front of a convex lens of focal length 10 cm be formed at the same point O. The radius of curvature of the mirror is 20 cm. Will the image be inverted or erect? OR An object is placed 15 cm in front of a convex lens of focal length 10 cm. Find the nature and position of the image formed. Where should a concave mirror of radius of curvature 20 cm be placed so that the final image is formed at the position of the object itself? [CBSE Panchkula 2015]
Solution.
For the lens, u = −15 cm and f = +10 cm.
1/v = 1/f + 1/u = 1/10 − 1/15 = 1/30 ⇒ v = +30 cm
The lens forms a real, inverted image I, 30 cm from the lens (magnification v/u = −2, so the image is twice the size of the object).
For the final image to be formed at O, the rays falling on the mirror must retrace their path. This happens if the image I formed by the lens lies at the centre of curvature of the mirror. Then the mirror forms its image at the centre of curvature itself, and this image acts as the object for the lens, whose final image is at O.
The mirror is therefore placed beyond I at a distance R = 20 cm: d = |v| + |R| = 30 + 20 = 50 cm from the lens.
The final image is inverted.
Teacher's Note: Rays retrace their path only if they meet the mirror normally, so the lens image is at its curvature centre.
Exam Note: Find v = 30 cm, then d = v + R = 50 cm.
Question 10. A compound microscope has an objective of focal length 1.25 cm and eyepiece of focal length 5 cm. A small object is kept at 2.5 cm from the objective. If the final image formed is at infinity, find the distance between the objective and the eyepiece. [CBSE (F) 2014]
Solution.
For the objective: 1/vo − 1/uo = 1/fo, with uo = −2.5 cm, fo = 1.25 cm
1/vo = 1/1.25 − 1/2.5 = 4/5 − 2/5 = 2/5 ⇒ vo = 2.5 cm
For the final image at infinity, the image formed by the objective lies at the focus of the eyepiece, so the eyepiece is at a distance fe = 5 cm from it.
Distance between objective and eyepiece L = vo + fe = 2.5 + 5.0 = 7.5 cm.
Teacher's Note: With the final image at infinity, the first image must lie at the eyepiece focus, so L = v₀ + fₑ.
Exam Note: Find vo = 2.5 cm, then L = vo + fe.
Question 11. Two convex lenses of same focal length but of aperture A₁ and A₂ (A₂ < A₁), are used as the objective lenses in two astronomical telescopes having identical eyepieces. What is the ratio of their resolving power? Which telescope will you prefer and why? Give reason. [CBSE Delhi 2011]
Solution.
Resolving power of a telescope R = A/(1.22λ), where A is the aperture of the objective.
∴ R1/R2 = A1/A2
The magnification of the telescope, m = fo/fe, is the same for both. We prefer the telescope of higher resolving power to view the fine details of the object, i.e., the telescope having the convex lens of aperture A1.
Teacher's Note: Resolving power of a telescope grows with objective aperture, while magnification depends only on f₀/fₑ.
Exam Note: Ratio = A1/A2; prefer larger aperture A1.
Question 12. The radii of curvature of both the surfaces of a lens are equal. If one of the surfaces is made plane by grinding, then will the focal length of lens change? Will the power change? [CBSE Guwahati 2015]
Solution.
Focal length of the lens: 1/f = (n − 1)(1/R + 1/R) ⇒ f = R/[2(n − 1)]
When one surface is made plane: 1/f′ = (n − 1)(1/R + 1/∞) = (n − 1)/R
∴ f′ = R/(n − 1) = 2f. That is, the focal length will be doubled.
As P = 1/f, the power will be halved.
Teacher's Note: Only one curved surface remains, so it contributes half the original refracting power.
Exam Note: Show f doubles and P halves using lens formula.
Question 13. A convex lens is placed in contact with a plane mirror. A point object at a distance of 20 cm on the axis of this combination has its image coinciding with itself. What is the focal length of the lens? [CBSE (Delhi) 2014]
Solution.
The focal length of the lens = 20 cm.
Explanation: The image of this combination coincides with the object itself, so the rays from the object, after refraction through the lens, must fall normally on the plane mirror so that they retrace their path. So the rays from the point object after refraction through the lens must form a parallel beam. Hence the rays must be originating from the focus of the lens, i.e., the object is at the focus and f = 20 cm.
Teacher's Note: Rays return along their own path only if they strike the plane mirror normally, i.e. as a parallel beam.
Exam Note: Parallel beam after lens means object at focus: f = 20 cm.
Question 14. Define the magnifying power of a compound microscope when the final image is formed at infinity. Why must both the objective and the eyepiece of a compound microscope have short focal lengths? Explain. [CBSE Delhi 2017]
Solution.
The magnifying power of a compound microscope is defined as the ratio of the angle subtended by the final image at the eye to the angle subtended by the object at the unaided eye (seen directly at the least distance of distinct vision).
m = mo × me = (L/fo) × (D/fe)
where D = least distance of distinct vision and L = tube length of the microscope.
Clearly, to achieve a large magnifying power, the objective and the eyepiece should have small focal lengths.
Teacher's Note: Magnification varies as 1/(f₀fₑ), so both focal lengths must be small to give large magnification.
Exam Note: Give definition and m = (L/fo)(D/fe).
Question 15. Why should the objective of a telescope have large focal length and large aperture? Justify your answer. [CBSE Delhi 2017]
Solution.
(i) Magnifying power = −fo/fe, where fo is the focal length of the objective lens and fe is the focal length of the eyepiece. Clearly, for large magnifying power, fo should be large.
(ii) Resolving power = d/(1.22λ), where d is the diameter (aperture) of the objective and λ is the wavelength of light used. Therefore, to increase the resolving power of the telescope, a large aperture of the objective lens is required.
Teacher's Note: Large f₀ raises magnification, and large aperture raises light gathering and resolving power.
Exam Note: Quote m = fo/fe and R = d/(1.22λ).
Question 16. (i) State the condition under which a large magnification can be achieved in an astronomical telescope. (ii) Give two reasons to explain why a reflecting telescope is preferred over a refracting telescope. [CBSE (F) 2017]
Solution.
(i) When the final image is formed at the least distance of distinct vision, the magnification is m = (fo/fe)(1 + fe/D). In normal adjustment, m = fo/fe.
Clearly, for large magnification, fo >> fe, i.e. the objective must have a much larger focal length than the eyepiece.
(ii) A reflecting telescope is preferred over a refracting telescope because
(a) there is no chromatic aberration, because a mirror is used;
(b) spherical aberration can be removed by using a parabolic mirror.
Other advantages: a large mirror can be given easier mechanical support, and a large-aperture mirror gathers more light, so the image is bright.
Teacher's Note: Large magnification needs a long-focus objective and a short-focus eyepiece.
Exam Note: State fo >> fe; two mirror advantages.
Question 17. Calculate the speed of light in a medium whose critical angle is 45°. [CBSE Patna 2015]
Solution.
Critical angle in the medium, ic = 45°
Refractive index μ = 1/sin ic = 1/sin 45° = √2
Also μ = c0/cm ⇒ √2 = 3 × 10⁸ / cm
cm = 3 × 10⁸/√2 ≈ 2.1 × 10⁸ m/s
Teacher's Note: The critical angle gives the refractive index, and then speed is c divided by that index.
Exam Note: Find μ = √2 then v = c/μ.
Question 18. A ray of light incident normally on one face of a right isosceles prism is totally reflected as shown in figure. What must be minimum value of refractive index of glass? Give relevant calculations. [CBSE Delhi 2016]
Solution.
The ray enters normally, so it is undeviated at the first face and strikes the hypotenuse at an angle of incidence i = 45°.
The critical angle depends on the refractive index μ as sin ic = 1/μ.
For total internal reflection, i > ic, i.e. 45° > ic, so sin ic < sin 45° = 1/√2.
1/μ ≤ 1/√2 ⇒ μ ≥ √2
Hence the minimum value of the refractive index must be √2.
Teacher's Note: At the hypotenuse the incidence angle is 45°, so the critical angle must not exceed 45°.
Exam Note: Use i = 45° > ic and sin ic = 1/μ.
Question 19. Draw a ray diagram to show how a right isosceles prism made of crown glass can be used to obtain the inverted image. [CBSE Guwahati 2015]
Solution.
Rays from the object AB fall normally on the hypotenuse face and enter the prism undeviated. They strike the two equal faces at 45°, which is greater than the critical angle of crown glass (about 41°), so they suffer total internal reflection twice and leave through the hypotenuse face. The rays are turned through 180° and the emergent rays form the inverted image A′B′ (figure).
Teacher's Note: Two total internal reflections at 45° reverse the ray direction and invert the image vertically.
Exam Note: Draw normal incidence, two TIRs, inverted A′B′.
Question 20. (i) A ray of light is incident normally on the face AB of a right-angled glass prism of refractive index aμg = 1.5. The prism is partly immersed in a liquid of unknown refractive index. Find the value of refractive index of the liquid so that the ray grazes along the face BC after refraction through the prism. (ii) Trace the path of the rays if it were incident normally on the face AC. [HOTS] [CBSE Ajmer 2015]
Solution.
(i) The ray enters AB normally and strikes BC at an angle of incidence equal to the critical angle ic = 60° (it grazes along BC after refraction, i.e. angle of refraction 90°).
From Snell's law: aμg sin ic = aμl sin 90°
1.5 × sin 60° = aμl
∴ aμl = 1.5 × (√3/2) ≈ 1.3
(ii) If the ray is incident normally on the face AC, it strikes BC at an angle of incidence 30°, which is less than ic. So the ray of light is refracted and deviates away from the normal, as it moves from the denser (glass) to the rarer medium (liquid), sin r = 1.5 sin 30° / 1.3, i.e. r ≈ 35° (figure below).
Teacher's Note: Grazing emergence means the angle of incidence equals the critical angle for the glass-liquid pair.
Exam Note: Apply μg sin ic = μl sin 90° with ic = 60°.
Question 21. A ray of light incident on an equilateral glass prism propagates parallel to the base line of the prism inside it. Find the angle of incidence of this ray. Given refractive index of material of glass prism is √3. [CBSE Bhubaneshwar 2015]
Solution.
The ray inside the prism is parallel to the base, so the prism is in the position of minimum deviation and r1 = r2 = A/2 = 30°.
So the angle of refraction is r = 30°.
μ = sin i / sin r ⇒ √3 = sin i / sin 30°
sin i = √3 sin 30° = √3 × 1/2 = √3/2 ⇒ i = 60°
Teacher's Note: A ray parallel to the base means symmetric passage, so r = A/2.
Exam Note: Use r = A/2 = 30° and Snell's law.
Question 22. A ray of light passing from air through an equilateral glass prism undergoes minimum deviation when the angle of incidence is 3/4th of the angle of prism. Calculate the speed of light in the prism. [CBSE (AI) 2017]
Solution.
Angle of prism A = 60° (since the prism is equilateral).
i = (3/4)A = (3/4) × 60° ⇒ i = 45°
At minimum deviation r = A/2 = 30°.
μ = sin i / sin r = sin 45° / sin 30° = (1/√2)/(1/2) = 2/√2 = √2
Speed of light in the prism v = c/μ = (3 × 10⁸)/√2 ≈ 2.1 × 10⁸ m/s
Teacher's Note: At minimum deviation r = A/2, so the refractive index follows from the given angle of incidence.
Exam Note: Find μ = √2, then v = c/μ.
Question 23. The focal length of a convex lens made of glass is 20 cm. What will be its new focal length when placed in a medium of refractive index 1.25? [CBSE Sample Paper 2017]
Solution.
Taking the refractive index of glass as 1.5, the lens maker's formula in air gives
1/20 = (1.5 − 1)[1/R1 − 1/R2] ⇒ [1/R1 − 1/R2] = 1/10
In the medium, the relative refractive index is μ′ = 1.5/1.25 = 1.2, so
1/f′ = (1.2 − 1)[1/R1 − 1/R2] = 0.2 × (1/10) = 1/50
f′ = 50 cm
Teacher's Note: In a medium use relative refractive index μ_glass/μ_medium in the lens maker's formula.
Exam Note: Take μg = 1.5; relative index 1.2 gives 50 cm.
Question 24. You have learnt that plane and convex mirrors produce virtual images of objects. Can they produce real images under some circumstances? Explain.
Solution.
Yes, plane and convex mirrors can form real images if the object is virtual, i.e., the rays incident on the mirror are convergent, as shown in figs. (i) and (ii).
(i) For a plane mirror, convergent rays directed towards a point O behind the mirror are reflected to meet at a real image I in front of the mirror, as far in front as O is behind.
(ii) For a convex mirror, convergent rays directed towards a virtual object O lying between the pole and the focus are reflected to meet at a real image I in front of the mirror.
Teacher's Note: A virtual object means converging incident rays; the mirror then makes them converge to a real point.
Exam Note: Say yes: object must be virtual (convergent rays).
Question 25. A convex lens, of focal length 20 cm, has a point object placed on its principal axis at distance of 40 cm from it. A plane mirror is placed 30 cm behind the convex lens. Locate the position of image formed by this combination.
Solution.
We first consider the effect of the lens. For the lens, u = −40 cm and f = +20 cm.
1/v − 1/(−40) = 1/20 ⇒ v = +40 cm
Had there been the lens only, the image would have been formed at Q1, 40 cm from the lens. The plane mirror M is at a distance of 30 cm from the lens. We can therefore think of Q1 as a virtual object, located at a distance of 10 cm behind the plane mirror M.
The plane mirror forms a real image of this virtual object at Q, 10 cm in front of it, i.e. 20 cm from the lens, between the lens and the mirror.
Teacher's Note: The lens image falls behind the mirror, so it acts as a virtual object for the plane mirror.
Exam Note: Find v = 40 cm; mirror reflects it 10 cm in front.
Question 26. A light ray incident at grazing angle on the face AB of a prism ABC, follows the path shown in the figure. Obtain the relation between the angle of prism A and the refractive index μ of its material.
Solution.
For grazing incidence at the first face, the angle of incidence is i = 90° (π/2):
μ = sin(π/2)/sin r1 = 1/sin r1 ⇒ r1 = sin⁻¹(1/μ)
At the second face the ray emerges grazing, so the angle of emergence is 90°:
1/μ = sin r2/sin(π/2) = sin r2 ⇒ r2 = sin⁻¹(1/μ)
Also A = r1 + r2 = 2 sin⁻¹(1/μ), i.e. μ = 1/sin(A/2).
Teacher's Note: Grazing incidence and grazing emergence make r₁ = r₂ = A/2 with sin r = 1/μ.
Exam Note: Use r1 + r2 = A with sin r = 1/μ.
Question 27. A right-angled crown glass prism with critical angle 41° is placed before an object, PQ in two positions as shown in the figures (i) and (ii). Trace the paths of the rays from P and Q passing through the prisms in the two cases.
Solution.
The angle of incidence of rays on the 45° faces is 45°, which is greater than the critical angle (41°) of crown glass, so total internal reflection takes place.
(i) The rays from P and Q enter the hypotenuse face normally, are totally reflected at both equal faces and emerge from the hypotenuse face. The image P′Q′ is inverted and the rays suffer a deviation of 180°.
(ii) The rays enter the face AB normally, are totally reflected at the hypotenuse AC and emerge normally from the face BC. The rays suffer a deviation of 90° (figure).
Teacher's Note: Crown glass has critical angle 41°, so a 45° incidence on the hypotenuse gives total internal reflection.
Exam Note: State 45° > 41° and trace both prisms.
Free study material for Physics
Class 12 Mathematics: Xam Idea Solutions for Xam Idea Solutions Class 12 Physics Chapter 9 Ray Optics And Optical Instruments Short Answer Questions I
Access Class 12 Mathematics Solutions
Review detailed solutions for Class 12 Mathematics. The Xam Idea Solutions Class 12 Physics Chapter 9 Ray Optics And Optical Instruments Short Answer Questions I PDF provides comprehensive answers mapped to standard Xam Idea Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.
Mastering Core Concepts with Xam Idea Solutions
Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.
Complete Your Class 12 Exam Preparation
In addition to these Xam Idea Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.
FAQs
They are chapter-wise solved questions from the book for Class 12 Physics. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.