Xam Idea Solutions Class 12 Physics Chapter 9 Ray Optics And Optical Instruments Long Answer Questions

Step-by-Step Solutions for Class 12 Physics Chapter 09 Ray Optics And Optical Instruments

Access comprehensive textbook solutions for Chapter 09 Ray Optics And Optical Instruments using the reference material for Class 12 Physics. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.

Download Chapter 09 Ray Optics And Optical Instruments Textbook Solutions PDF

Access the complete solution PDF for Class 12 Physics below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

Long Answer Questions

Question 1. Answer the following question : [CBSE (F) 2015] (i) Draw a ray diagram showing image formation in a compound microscope. Define the term ‘limit of resolution’ and name the factors on which it depends. How is it related to resolving power of a microscope? (ii) Suggest two ways by which the resolving power of a microscope can be increased. (iii) “A telescope resolves whereas a microscope magnifies.” Justify this statement.

Solution.

(i) For diagram Refer to Question 10 above (ray diagram of the compound microscope)

Limit of resolution

The minimum linear or angular separation between two points at which they can be just separately seen or resolved by an optical instrument. It depends on

(i) Wavelength of light used

(ii) Medium between object and objective lens

Resolving power of microscope is the reciprocal of its limit of resolution.

(ii) Resolving power of compound microscope can be increased by

(i) Decreasing wavelength

(ii) Increasing refractive index of the medium between object and objective of the microscope

(iii) A telescope produces an angularly magnified image of the far object and thereby enables us to resolve them

A microscope magnifies small objects which are near to our eye.

Teacher's Note: Resolving power depends on wavelength and numerical aperture, and is the reciprocal of the limit of resolution.

Exam Note: Draw labelled diagram, define limit, give relation, two improvements.

Question 2. (i) Derive the mirror formula. What is the corresponding formula for a thin lens? (ii) Draw a ray diagram to show the image formation by a concave mirror when the object is kept between its focus and the pole. Using this diagram, derive the magnification formula for the image formed. [CBSE Delhi 2011]

Solution.

(i) Mirror formula. M1M2 is a concave mirror with pole P, focus F and centre of curvature C. An object AB is placed beyond C with B on the principal axis; the image formed is A′B′. DN is the perpendicular dropped from the point of incidence D on the principal axis.

In ΔABC and ΔA′B′C: ∠ABC = ∠A′B′C (each 90°) and ∠ACB = ∠A′CB′ (vertically opposite), so the triangles are similar: A′B′/AB = B′C/BC …(i)

Also ΔDNF ~ ΔA′B′F, and DN = AB, NF ≈ PF (D is close to P): A′B′/AB = B′F/PF …(ii)

From (i) and (ii): B′C/BC = B′F/PF, i.e. (PC − PB′)/(PB − PC) = (PB′ − PF)/PF …(iii)

Sign convention: PB = −u, PB′ = −v, PF = −f, PC = −R = −2f (u, v, f being the signed values). Putting these in (iii): (v − R)/(R − u) = (v − f)/f, i.e. f(v − R) = (v − f)(R − u).

With R = 2f this simplifies to fv − uv + fu = 0. Dividing by uvf:

1/v + 1/u = 1/f (mirror formula).

Thin lens formula: 1/v − 1/u = 1/f.

(ii) Ray diagram for an object between F and P is shown in the figure: the image A′B′ is virtual, erect and magnified, formed behind the mirror.

Magnification. A ray from A strikes the pole P and is reflected at the same angle (∠APB = ∠A′PB′). So ΔABP ~ ΔA′B′P and A′B′/AB = PB′/PB.

With height of object h and of image h′ (both upward, i.e. erect), PB = −u and PB′ = +v: m = h′/h = −v/u. Here v is positive and u negative, so m is positive and greater than 1 (since |v| > |u|).

ABFCPA′B′virtual, erect, magnified image behind the mirror

Teacher's Note: Mirror formula needs two similar-triangle pairs; the pole ray gives m = −v/u for the virtual image.

Exam Note: Derive 1/v + 1/u = 1/f; draw virtual image; m = −v/u.

Question 3. With the help of a ray diagram, show the formation of image of a point object due to refraction of light at a spherical surface separating two media of refractive indices n₁ and n₂ (n₂ > n₁) respectively. Using this diagram, derive the relation n₂/v − n₁/u = (n₂ − n₁)/R. Write the sign conventions used. What happens to the focal length of convex lens when it is immersed in water?

Solution.

Refraction at a spherical surface (concave surface). SPS′ is a spherical refracting surface separating medium 1 (rarer, n1) and medium 2 (denser, n2, with n1 < n2). P is the pole, C the centre of curvature and PC the principal axis.

O is a point object on the axis. The ray OA bends towards the normal CAN and moves along AB; the ray OP falls normally and passes undeviated. Produced backwards, these rays meet at I on the axis, so I is the virtual image of O.

Let ∠OAC = i, ∠NAB = r, ∠AOP = α, ∠AIP = β, ∠ACP = γ.

In ΔOAC: γ = α + i, so i = γ − α …(i)

In ΔAIC: γ = β + r, so r = γ − β …(ii)

Snell’s law n1 sin i = n2 sin r becomes, for A very near to P (small angles), n1i = n2r. Using (i) and (ii): n1(γ − α) = n2(γ − β) …(iii)

Let AM = h be the perpendicular on the axis. For small angles α ≈ tan α = h/MO, β ≈ h/MI, γ ≈ h/MC. As A is very close to P, M coincides with P. Substituting in (iii): n1(1/PC − 1/PO) = n2(1/PC − 1/PI), i.e.

n2/PI − n1/PO = (n2 − n1)/PC …(iv)

Let u, v and R be the signed distances of O, I and C from P. Here PO, PI and PC lie opposite to the incident light, so u = −PO, v = −PI, R = −PC. Substituting in (iv):

n2/v − n1/u = (n2 − n1)/R

Sign conventions: (i) All distances are measured from the pole P (optical centre for a lens). (ii) Distances measured in the direction of the incident light are taken positive and those against it negative. (iii) Heights above the principal axis are positive and those below it negative.

Focal length in water: when a convex lens is immersed in water, the relative refractive index n of the lens material decreases, so the focal length increases.

In1 (rarer)n2 (denser)OPCAh

Teacher's Note: Small-angle Snell plus exterior-angle relations give the surface formula; immersing a lens in water lengthens its focal length.

Exam Note: State sign convention; result n₂/v − n₁/u = (n₂−n₁)/R.

Question 4. A spherical surface of radius of curvature R, separates a rarer and a denser medium as shown in the figure. Complete the path of the incident ray of light, showing the formation of a real image. Hence derive the relation connecting object distance ‘u’, image distance ‘v’, radius of curvature R and the refractive indices n₁ and n₂ of two media. Briefly explain, how the focal length of a convex lens changes, with increase in wavelength of incident light. [CBSE Delhi 2014; Central 2016; (F) 2017; Sample Paper 2016]

Solution.

Convex spherical refracting surface. SPS′ separates a rarer medium (n1) from a denser medium (n2); P is the pole, C the centre of curvature and PC the principal axis. O is a point object on the axis (for a real image it lies far enough from the surface).

The ray OA meets the surface at A (normal CAN); going from rarer to denser medium it bends towards the normal and travels along AB. The ray OP falls normally and goes undeviated along PQ. AB and PQ meet at I on the axis, so I is the real image of O (see figure).

Let ∠OAN = i, ∠CAI = r, ∠AOP = α, ∠AIP = β, ∠ACP = γ.

In ΔOAC: i = α + γ …(i) In ΔAIC: γ = β + r, so r = γ − β …(ii)

For small angles Snell’s law gives n1i = n2r, hence n1(α + γ) = n2(γ − β), i.e. n1α + n2β = (n2 − n1)γ …(iii)

With AM = h perpendicular to the axis and M ≈ P: α = h/PO, β = h/PI, γ = h/PC. Hence

n1/PO + n2/PI = (n2 − n1)/PC …(iv)

By the sign convention PO is against the incident light while PI and PC are along it: u = −PO, v = +PI, R = +PC. Substituting in (iv):

n2/v − n1/u = (n2 − n1)/R

Effect of wavelength: as the wavelength increases, the refractive index n of the lens material decreases. Since 1/f = (n − 1)(1/R1 − 1/R2), the focal length of the lens increases with increase in wavelength.

In1 (rarer)n2 (denser)OPCAh

Teacher's Note: Here the exterior angle gives i = α + γ; the real image I lies on the denser-medium side.

Exam Note: Real image on far side; i = α + γ; same final formula.

Question 5. Draw a ray diagram for formation of image of a point object by a thin double convex lens having radii of curvature R₁ and R₂. Hence, derive lens maker’s formula for a double convex lens. State the assumptions made and sign convention used. [CBSE (F) 2009, 2013, (Central) 2016]

Solution.

Lens maker’s formula. L is a thin lens of refractive index n2 placed in a medium of refractive index n1. Its optical centre is C, X′X is the principal axis, the radii of curvature of its surfaces are R1 and R2 with poles P1 and P2, and its thickness t is very small. O is a point object on the axis at distance u from P1.

Assumptions: (i) the lens is thin; (ii) the object is a point object on the principal axis; (iii) the aperture of the lens is small; (iv) the rays are paraxial (make small angles with the axis).

First surface forms an image I′ of O at distance v′ from P1. From the refraction formula at a spherical surface:

n2/v′ − n1/u = (n2 − n1)/R1 …(i)

Second surface: I′ acts as a (virtual) object at distance (v′ − t) from P2, and the final image I forms at distance v from P2. The ray now passes from the lens (n2) into the medium (n1):

n1/v − n2/(v′ − t) = (n1 − n2)/R2 …(ii)

For a thin lens t is negligible, so (ii) becomes n1/v − n2/v′ = (n1 − n2)/R2 …(iii)

Adding (i) and (iii): n1/v − n1/u = (n2 − n1)(1/R1 − 1/R2)

Dividing by n1: 1/v − 1/u = (n2/n1 − 1)(1/R1 − 1/R2)

If the object is at infinity, u = ∞ and v = f. Writing n = n2/n1:

1/f = (n − 1)(1/R1 − 1/R2)

For a double convex lens R1 is positive and R2 is negative, so 1/f = (n − 1)(1/R1 + 1/|R2|).

Sign convention: all distances are measured from the optical centre; distances along the direction of the incident light are positive and those opposite to it are negative; heights above the axis are positive and below it negative.

OIC1C2P1P2R1R2uvrays shown are paraxial (small aperture)n1n2n1

Teacher's Note: Add the two surface equations so the intermediate image I′ cancels; setting u = ∞ gives the focal length.

Exam Note: Add surface equations, t ≈ 0, u = ∞: 1/f = (n−1)(1/R₁−1/R₂).

Question 6. Draw a ray diagram to show the formation of real image of the same size as that of the object placed in front of a converging lens. Using this ray diagram establish the relation between u, v and f for this lens.

Solution.

Thin lens formula. An object AB is placed normally on the principal axis of a thin convex lens (figure; the real image is the same size as the object when AB is at 2F′). A ray AP from A parallel to the axis passes, after refraction, through the second focus F. Another ray AC through the optical centre C goes undeviated. They meet at A′, so A′ is the real image of A and A′B′ is the image of AB.

Let CB = u (magnitude |u|), CB′ = v, and CF = f.

ΔABC and ΔA′B′C are similar: A′B′/AB = CB′/CB = v/|u| …(i)

Also ΔPCF and ΔA′B′F are similar (PC = AB): A′B′/AB = B′F/CF = (v − f)/f …(ii)

From (i) and (ii): v/|u| = (v − f)/f, i.e. vf = |u|v − |u|f. Dividing by |u|vf: 1/|u| = 1/f − 1/v.

With the sign convention u = −|u| (object on the side of incident light): 1/v − 1/u = 1/f

Same-size image: A′B′ = AB makes (v − f)/f = 1, so v = 2f and |u| = v = 2f. Check: 1/(2f) + 1/(2f) = 1/f.

ABA′B′F′F2F′2FCu = 2fv = 2f

Teacher's Note: Equal-size real image needs the object at 2F′ and image at 2F; similar triangles give the formula.

Exam Note: Object at 2F′, image at 2F; state 1/v − 1/u = 1/f.

Question 7. Derive the lens formula 1/f = 1/v − 1/u for a thin concave lens, using the necessary ray diagram.

Solution.

The formation of an image by a concave lens L is shown in the figure. AB is the object (on the axis, at distance |u| from the optical centre O) and A′B′ is the virtual, erect, diminished image on the same side as the object, at distance |v|. F′ is the focus on the object side (|OF′| = |f|).

The ray AO through the optical centre goes straight; the ray from A parallel to the axis diverges as if coming from F′. Produced backwards, they meet at A′.

ΔABO and ΔA′B′O are similar: A′B′/AB = OB′/OB = |v|/|u| …(i)

If C is the point where the parallel ray meets the lens, OC = AB and ΔOCF′ ~ ΔB′A′F′: A′B′/AB = B′F′/OF′ = (|f| − |v|)/|f| …(ii)

From (i) and (ii): |v|/|u| = (|f| − |v|)/|f|, i.e. |v||f| = |u||f| − |u||v|. Dividing by |u||v||f|: 1/|u| = 1/|v| − 1/|f|.

By sign convention u = −|u|, v = −|v|, f = −|f| (all measured against the incident light): 1/|u| = −1/u, 1/|v| = −1/v, 1/|f| = −1/f. So −1/u = −1/v + 1/f, i.e.

1/f = 1/v − 1/u

ABFF′OA′B′

Teacher's Note: Virtual image on the object side makes every distance negative; two similar-triangle pairs lead to the formula.

Exam Note: Two similar-triangle pairs; apply signs u, v, f all negative.

Question 8. Define power of a lens. Write its units. Deduce the relation 1/f = 1/f₁ + 1/f₂ for two thin lenses kept in contact coaxially. [CBSE (F) 2012]

Solution.

Power of a lens: it is the reciprocal of the focal length of the lens, P = 1/f (f in metre). Its unit is the dioptre (D), 1 D = 1 m⁻¹.

Combination. An object is placed at O. Lens A (focal length f1) produces an image at I′, which serves as a (virtual) object for lens B (focal length f2); lens B produces the final image at I. The lenses are thin, so their optical centres practically coincide and the distances may be measured from the common centre.

For lens A (object distance u, image distance v′): 1/v′ − 1/u = 1/f1 …(i)

For lens B, I′ is the object at distance v′ and the final image is at v: 1/v − 1/v′ = 1/f2 …(ii)

Adding (i) and (ii): 1/v − 1/u = 1/f1 + 1/f2 …(iii)

If the combination is replaced by a single lens of focal length f that forms the image at the same place, 1/v − 1/u = 1/f …(iv)

Comparing (iii) and (iv): 1/f = 1/f1 + 1/f2, i.e. P = P1 + P2.

AOI′IL1L2uv

Teacher's Note: Image of the first lens is the object of the second; adding the two lens equations cancels v′.

Exam Note: Define P = 1/f in dioptre; add two lens equations.

Question 9. Two thin convex lenses L₁ and L₂ of focal lengths f₁ and f₂ respectively, are placed coaxially in contact. An object is placed at a point beyond the focus of lens L₁. Draw a ray diagram to show the image formation by the combination and hence derive the expression for the focal length of the combined system. [CBSE Panchkula 2015]

Solution.

O is the object, I′ the image formed by L1 (it acts as a virtual object for L2) and I the final image formed by L2 (see figure).

As the lenses are thin and in contact, all distances are measured from their common optical centre. Let the object distance be u, the distance of I′ be v′ and of I be v.

Lens L1: 1/v′ − 1/u = 1/f1 …(i)

Lens L2 (object I′): 1/v − 1/v′ = 1/f2 …(ii)

Adding (i) and (ii): 1/v − 1/u = 1/f1 + 1/f2.

For a single equivalent lens of focal length f giving the same image, 1/v − 1/u = 1/f. Hence

1/f = 1/f1 + 1/f2, or f = f1f2/(f1 + f2).

AOI′IL1L2uv

Teacher's Note: Drawn with f₁ = 80, f₂ = 100 units: image I′ beyond lens pair is a virtual object for L₂.

Exam Note: Add 1/v′−1/u and 1/v−1/v′; f = f₁f₂/(f₁+f₂).

Question 10. (a) Draw the labelled ray diagram for the formation of image by a compound microscope. Derive an expression for its total magnification (or magnifying power), when the final image is formed at the near point. [CBSE Delhi 2009, 2010, 2013] (b) Why both objective and eyepiece of a compound microscope must have short focal lengths? Draw a ray diagram showing the image formation by a compound microscope. Hence obtain expression for total magnification when the image is formed at infinity. [CBSE Delhi 2013]

Solution.

(a) Compound microscope. It has two convex lenses on a common axis: the objective (small aperture, very short focal length fo) and the eyepiece (somewhat larger aperture and focal length fe, fo < fe).

Working: a small object AB is placed slightly beyond the first focus Fo of the objective. The objective forms a real, inverted, magnified image A′B′. The eyepiece is so adjusted that A′B′ lies between its first focus Fe′ and the eyepiece; it acts as a simple magnifier and forms a virtual, magnified image A″B″ (at the near point D for the case below). The final image is inverted with respect to the object.

Magnifying power M = β/α, where β is the angle subtended by the final image at the eye and α the angle subtended by the object when placed at the least distance of distinct vision D. For small angles tan α = α = AB/D and tan β = β = A′B′/ue (the angle subtended by A′B′ at the eyepiece).

M = β/α = (A′B′/AB)(D/ue) = mo × (D/ue), where mo = A′B′/AB = vo/uo is the linear magnification of the objective.

For the final image at the near point, ve = −D. Using the lens formula for the eyepiece, 1/ve − 1/ue = 1/fe gives −1/D − 1/ue = 1/fe, so in magnitudes 1/ue = 1/fe + 1/D and D/ue = 1 + D/fe.

M = mo(1 + D/fe) = (vo/uo)(1 + D/fe) (the negative sign, i.e. an inverted image, is understood).

Why fo and fe must be short: as the object is close to Fo (uo ≈ fo) and vo ≈ L (tube length), mo ≈ L/fo, which is large only for small fo. Also (1 + D/fe) is large only for small fe. So for greater magnification both should be short, with fo the shorter of the two.

(b) Final image at infinity. The image A′B′ is formed exactly at the first focus of the eyepiece, so ue = fe and the final image is at infinity. Then D/ue = D/fe.

The object is very close to Fo, so uo ≈ fo and vo ≈ L, where L = distance between the second focus of the objective and the first focus of the eyepiece. Hence mo ≈ L/fo.

M = mo × D/fe = (L/fo)(D/fe) (inverted final image).

ABA′B′FoFo′Fe′FeObjectiveEyepieceA″B″vouo

Teacher's Note: Image of objective is the object for the eyepiece, so total M is the product of the two magnifications.

Exam Note: M = mₒ(1 + D/fₑ) near point; (L/fₒ)(D/fₑ) at infinity.

Question 11. Explain with the help of a labelled ray diagram, how is image formed in an astronomical telescope. Derive an expression for its magnifying power. [CBSE (F) 2014] OR Draw a ray diagram showing the image formation of a distant object by a refracting telescope. Define its magnifying power and write the two important factors considered to increase the magnifying power. Describe briefly the two main limitations and explain how far these can be minimised in a reflecting telescope. [CBSE (F) 2015]

Solution.

Astronomical (refracting) telescope. It has two co-axial tubes. The objective L1 is an achromatic convex lens of large focal length fo and large aperture (to collect enough light for a bright image). The eyepiece L2 is an achromatic convex lens of small focal length fe and small aperture.

Working: the objective forms a real, inverted, diminished image A′B′ of the distant object at its second focus Fo. A′B′ lies between the first focus Fe and the optical centre of the eyepiece (in normal adjustment, at Fe itself), so the eyepiece acts as a magnifier and forms a virtual, magnified final image A″B″, inverted with respect to the object.

Magnifying power is the ratio of the angle β subtended at the eye by the final image to the angle α subtended at the eye by the object, M = β/α. For small angles, α = A′B′/fo (the object is so far that the angle at the objective equals that at the eye) and β = A′B′/ue, where ue is the distance of A′B′ from the eyepiece. So

M = β/α = fo/ue (general formula; only magnitudes are used). Length of the telescope: L = fo + ue.

(i) Final image at the near point D: ve = D, so 1/ue = 1/fe + 1/D, and M = (fo/fe)(1 + fe/D), with L = fo + ue.

(ii) Normal adjustment (final image at infinity): A′B′ is at the focus of the eyepiece, ue = fe, ve = ∞:

M = fo/fe, and the length of the telescope is fo + fe.

Factors to increase magnifying power: (i) increase the focal length of the objective, (ii) decrease the focal length of the eyepiece. A large objective diameter also gives high resolving power.

Limitations of a refracting telescope: (i) chromatic aberration, (ii) spherical aberration; it also has small magnifying and resolving power for its size (a big lens is heavy and hard to support).

Reflecting telescope reduces these: (i) a mirror causes no chromatic aberration; (ii) spherical aberration is removed by using a parabolic mirror; (iii) the image is bright, since there is no loss of light by absorption in glass; (iv) a large mirror is mechanically easier to support.

Fo′ = FeObjectiveEyepieceA′B′αβto eyefofe

Teacher's Note: Parallel rays from a distant point focus on Fₒ and leave the eyepiece parallel; M = fₒ/fₑ.

Exam Note: State M = fₒ/fₑ and length fₒ + fₑ for normal adjustment.

Question 12. (i) Draw a labelled ray diagram to obtain the real image formed by an astronomical telescope in normal adjustment position. Define its magnifying power. (ii) You are given three lenses of power 0.5 D, 4 D and 10 D to design a telescope. (a) Which lenses should be used as objective and eyepiece? Justify your answer. (b) Why is the aperture of the objective preferred to be large? [CBSE (Central) 2016]

Solution.

(i) The ray diagram (normal adjustment) is shown in the figure: the objective forms a real, inverted image A′B′ at its second focus, which coincides with the first focus of the eyepiece; the final image is at infinity.

Definition: the magnifying power of a telescope is the ratio of the angle β subtended at the eye by the final image to the angle α subtended at the eye by the object, M = β/α.

(ii)(a) In normal adjustment M = fo/fe = Pe/Po. The objective should have the least power (largest focal length) and the eyepiece the greatest power. So the objective is the 0.5 D lens (fo = 2 m = 200 cm) and the eyepiece is the 10 D lens (fe = 0.1 m = 10 cm).

This choice gives the highest magnification: M = 10/0.5 = 20 (with the 4 D lens as objective it would be only 10/4 = 2.5, and with 4 D as eyepiece 4/0.5 = 8).

(b) The aperture of the objective is preferred to be large so that it collects more light and forms a brighter image of a distant (faint) object; it also improves the resolving power.

Fo′ = FeObjectiveEyepieceA′B′αβto eyefofe

Teacher's Note: Objective needs the smallest power, eyepiece the largest; M = Pₑ/Pₒ. Source answer had 5 D, a misprint for 0.5 D.

Exam Note: Objective 0.5 D, eyepiece 10 D, M = 20.

Question 13. Draw a graph to show the angle of deviation δ with the variation of angle of incidence i for a monochromatic ray of light passing through a prism of refracting angle A. Deduce the relation n = sin[(A + δm)/2] / sin(A/2). [CBSE Delhi 2011, 2016; (F) 2011, 2017; Sample Paper 2016]

Solution.

Prism. A prism is a homogeneous transparent medium enclosed between two plane refracting surfaces; the angle between them is the refracting angle A. PQR is its principal section. A ray EF falls on face PQ at angle of incidence i1; entering from rarer to denser medium it bends towards the normal and goes along FG with angle of refraction r1. At face PR the angle of incidence is r2 and the ray emerges along GH with angle of emergence i2. EF and GH, produced, meet at O; the angle between them is the angle of deviation δ.

In the quadrilateral AFNG (N the meeting point of the two normals), ∠F + ∠G = 180°, so ∠A + ∠FNG = 180°. In ΔFNG, r1 + r2 + ∠FNG = 180°. Therefore r1 + r2 = A …(i)

The deviation at F is (i1 − r1) and at G is (i2 − r2); both are in the same sense, so δ = (i1 − r1) + (i2 − r2) = i1 + i2 − (r1 + r2), i.e. δ = i1 + i2 − A …(ii), or i1 + i2 = A + δ.

Minimum deviation. δ depends on i1. By reversibility of light, if the angle of incidence is i2 the angle of emergence is i1, so each δ (except the least) occurs for two angles of incidence. On increasing i1 from a small value, δ first decreases, becomes minimum (δm) and then increases (graph shown). At minimum deviation the two values coincide: i1 = i2 = i, and hence r1 = r2 = r.

From (i): r + r = A, so r = A/2. From (ii): δm = 2i − A, so i = (A + δm)/2.

By Snell’s law, with the prism in air: n = sin i / sin r = sin[(A + δm)/2] / sin(A/2)

EFGHPQRAOδi1r1r2i2
δmi1 = i2 = ii1i2δangle of incidence iδ

Teacher's Note: Graph is a U-shaped curve; at the minimum i₁ = i₂, so r = A/2 and i = (A + δm)/2.

Exam Note: Show r₁ + r₂ = A, δ = i₁ + i₂ − A; set i₁ = i₂.

Xam Idea Solutions for Class 12 Mathematics: Xam Idea Solutions Class 12 Physics Chapter 9 Ray Optics And Optical Instruments Long Answer Questions

Access Class 12 Mathematics Solutions

Access the complete chapter-wise PDF for Xam Idea Solutions Class 12 Physics Chapter 9 Ray Optics And Optical Instruments Long Answer Questions. These structured Xam Idea Solutions solutions for Class 12 Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.

Mastering Core Concepts with Xam Idea Solutions

Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.

Next Steps in Your Mathematics Revision

In addition to these Xam Idea Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.

FAQs

What are these [current-page:node:field_author] Solutions for Class 12 Physics?

They are chapter-wise solved questions from the book for Class 12 Physics. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 12 Physics Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 12 Physics?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 12 Physics questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 12 Physics Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.