Solutions for Class 12 Physics: Chapter 09 Ray Optics And Optical Instruments
Explore reliable textbook solutions for Chapter 09 Ray Optics And Optical Instruments tailored for Class 12 learners using methodologies. Utilizing these Physics answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.
Practice Class 12 Physics Solutions: Chapter 09 Ray Optics And Optical Instruments
Navigate directly to the solved Physics textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.
Short Answer Questions II
Question 1. How is the working of a telescope different from that of a microscope? [CBSE Delhi 2012]
Solution.
Difference in working of telescope and microscope
(i) Objective of telescope forms the image of a very far off object at or within the focus of its eyepiece. The microscope does the same for a small object kept just beyond the focus of its objective.
(ii) The final image formed by a telescope is magnified relative to its size as seen by the unaided eye while the final image formed by a microscope is magnified relative to its absolute size.
(iii) The objective of a telescope has large focal length and large aperture while the corresponding parameters for a microscope have very small values.
Teacher's Note: A telescope views distant objects and enlarges their angle, while a microscope magnifies near small objects.
Exam Note: Give two or three clear points of difference.
Question 2. (i) What is total internal reflection? Under what conditions does it occur? (ii) Find a relation between critical angle and refractive index. (iii) Name one phenomenon which is based on total internal reflection. [CBSE (East) 2016]
Solution.
(i) When a ray of light travels from an optically denser medium into a rarer medium at an angle of incidence greater than the critical angle, it is reflected back into the denser medium. This phenomenon is called total internal reflection.
Conditions: (a) the ray must travel from an optically denser to an optically rarer medium; (b) the angle of incidence in the denser medium must be greater than the critical angle.
(ii) Snell's law gives 1/μ = sin i / sin r for a ray going from the denser to the rarer medium. For total internal reflection to occur, i ≥ ic; at the critical angle the angle of refraction is r = 90°, hence 1/μ = sin ic/sin 90°, i.e. μ = 1/sin ic.
(iii) (a) Mirage (b) optical fibre (c) sparkling of diamond (d) shining of air bubbles in water (e) totally reflecting prism.
Teacher's Note: At the critical angle the refracted ray grazes the surface, giving sin i_c = 1/μ for the denser medium.
Exam Note: Define TIR, give two conditions, μ = 1/sin ic.
Question 3. (i) Name the phenomenon on which the working of an optical fibre is based. (ii) What are the necessary conditions for this phenomenon to occur? (iii) Draw a labelled diagram of an optical fibre and show how light propagates through the optical fibre using this phenomenon. [CBSE (South) 2016]
Solution.
(i) The working of an optical fibre is based on total internal reflection.
(ii) (a) Rays of light have to travel from the optically denser medium to the optically rarer medium and (b) the angle of incidence in the denser medium should be greater than the critical angle.
(iii) The fibre has a core of refractive index 1.7 with a coating of refractive index 1.5. A ray entering at A strikes the core-coating boundary at an angle greater than the critical angle, so it undergoes repeated total internal reflections and emerges at B (figure).
Teacher's Note: The core must be optically denser than the coating so that rays are trapped by repeated total reflection.
Exam Note: Name TIR, give two conditions, draw labelled fibre.
Question 4. (i) Draw a schematic labelled ray diagram of a reflecting type telescope (Cassegrain). (ii) The objective of a telescope is of larger focal length and of larger aperture (compared to the eyepiece). Why? Give reasons. [CBSE (F) 2013] OR Draw a schematic ray diagram of reflecting telescope showing how rays coming from a distant object are received at the eye-piece. Write its two important advantages over refracting telescope. [CBSE Delhi 2016]
Solution.
(i) The schematic diagram of the Cassegrain reflecting telescope is shown in the figure: parallel rays from the distant object fall on the large concave primary mirror and are reflected towards its focus; the small convex secondary mirror intercepts them and reflects them through the hole in the primary mirror to form the image, which is viewed through the eyepiece.
(ii) In normal adjustment, the magnifying power of the telescope is M = fo/fe.
(a) If the focal length of the objective is large in comparison to the eyepiece, the magnifying power increases.
(b) Resolving power of the telescope RP = D/(1.22λ), D being the diameter of the objective. To increase the resolving power of the telescope, a large aperture of the objective is required.
Advantages of a reflecting telescope:
(i) No chromatic aberration.
(ii) Easy mechanical support (a mirror is lighter than a lens of equivalent optical quality, so it can be supported from behind).
(iii) A large mirror gives large light-gathering power and high resolving power.
(iv) Spherical aberration can be removed by using a parabolic mirror.
Teacher's Note: Mirrors reflect all colours equally, so no chromatic aberration, and a parabolic shape removes spherical aberration.
Exam Note: Draw mirrors, eyepiece; give two advantages.
Question 5. (i) A mobile phone lies along the principal axis of a concave mirror. Show, with the help of a suitable diagram, the formation of its image. Explain why magnification is not uniform. (ii) Suppose the lower half of the concave mirror's reflecting surface is covered with an opaque material. What effect this will have on the image of the object? Explain. [CBSE (Delhi) 2014]
Solution.
(i) The position of the image of different parts of the mobile phone depends on their position with respect to the mirror. The image of the part which lies in the plane perpendicular to the principal axis through C is formed in the same plane and has the same size, i.e., B′C = BC. The images of the other parts of the phone are magnified more, as an object placed between C and F is magnified, and the magnification increases as the object comes nearer to F. So the magnification is not uniform.
(ii) Taking the laws of reflection to be true for all points of the remaining (uncovered) part of the mirror, the image will still be that of the whole object. As the area of the reflecting surface has been reduced, the intensity of the image will be low (in this case half).
Teacher's Note: Longitudinal magnification differs from point to point because image distance varies strongly with object position.
Exam Note: Draw image; say magnification varies; intensity halves.
Question 6. (i) Calculate the distance of an object of height h from a concave mirror of radius of curvature 20 cm, so as to obtain a real image of magnification 2. Find the location of image also. (ii) Using mirror formula, explain why does a convex mirror always produce a virtual image. [CBSE Delhi 2016]
Solution.
(i) R = −20 cm and m = −2 (a real image is inverted).
Focal length f = R/2 = −10 cm
Magnification m = −v/u = −2 ∴ v = 2u
Using the mirror formula 1/v + 1/u = 1/f: 1/(2u) + 1/u = −1/10
3/(2u) = −1/10 ⇒ u = −15 cm, v = 2(−15) = −30 cm
The object is 15 cm in front of the mirror and the real image is formed 30 cm in front of the mirror.
(ii) 1/v + 1/u = 1/f, i.e. 1/v = 1/f − 1/u. Using the sign convention for a convex mirror, f > 0 and u < 0. As f is positive and u is negative, 1/f − 1/u is always positive, so v is always positive, i.e. the image is always virtual (behind the mirror).
Teacher's Note: A real image formed by a mirror is in front of it, so v is negative in Cartesian convention.
Exam Note: Use m = −v/u = −2 with f = −10 cm.
Question 7. What are optical fibres? Mention their one practical application. [CBSE Delhi 2011, Guwahati 2015]
Solution.
Optical fibre: An optical fibre is a device based on total internal reflection by which a light signal may be transmitted from one place to another with a negligible loss of energy. It is a very long and thin pipe of quartz (n = 1.7) of thickness nearly 10⁻⁴ m coated all around with a material of refractive index 1.5. A large number of such fibres held together form a light pipe and are used for communication of light signals.
When a light ray is incident on one end at a small angle of incidence, it suffers refraction from air to quartz and strikes the quartz-coating interface at an angle more than the critical angle and so suffers total internal reflection. It then strikes the opposite face again at an angle greater than the critical angle and again suffers total internal reflection. Thus the ray within the fibre suffers multiple total internal reflections and finally strikes the other end at an angle less than the critical angle for the quartz-air interface and emerges in air.
As there is no loss of energy in total internal reflection, the light signal is transmitted by this device without any appreciable loss of energy.
Application: Optical fibre is used to transmit light signals to distant places (for example in communication).
Teacher's Note: Light stays trapped in the core by repeated total internal reflection, so signals travel with almost no loss.
Exam Note: Define fibre via TIR; give one application.
Question 8. A convex lens made up of glass of refractive index 1.5 is dipped, in turn, in (i) a medium of refractive index 1.65, (ii) a medium of refractive index 1.33. (i) Will it behave as a converging or a diverging lens in the two cases? (ii) How will its focal length change in the two media? [CBSE (AI) 2011]
Solution.
Focal length of lens in liquid (l): fl = [(μg − 1)/(μg/μl − 1)] fa
(i) For μl = 1.65: μg/μl = 1.5/1.65 < 1, so fl and fa have opposite signs; the convex lens in the liquid of index 1.65 behaves as a diverging lens.
For μl = 1.33: μg/μl = 1.5/1.33 > 1, so fl and fa have the same sign; the lens in the liquid of index 1.33 behaves as a converging lens.
(ii) In the medium of index 1.65: fl = [(1.5 − 1)/(1.5/1.65 − 1)] fa = −5.5 fa (the focal length becomes negative and its magnitude increases).
In the medium of index 1.33: fl = [(1.5 − 1)/(1.5/1.33 − 1)] fa ≈ 3.9 fa (the focal length increases to about four times).
Teacher's Note: A lens converges only if its index exceeds that of the surrounding medium; otherwise it diverges.
Exam Note: Compute relative index and fl/fa for both liquids.
Question 9. A biconvex lens of glass of refractive index 1.5 having focal length 20 cm is placed in a medium of refractive index 1.65. Find its focal length. What should be the value of the refractive index of the medium in which the lens should be placed so that it acts as a plane sheet of glass? [CBSE Bhubaneshwar 2015]
Solution.
Lens in air: 1/fa = (μg − 1)(1/R1 − 1/R2). Lens in a medium: 1/fm = (μg/μm − 1)(1/R1 − 1/R2).
fa/fm = (μg/μm − 1)/(μg − 1)
20/fm = (1.5/1.65 − 1)/(1.5 − 1) = −0.1818 ⇒ fm = −110 cm
If the lens in the medium behaves as a plane sheet of glass, then fm = ∞, i.e. 0 = (μg/μm − 1)(1/R1 − 1/R2) ⇒ μm = μg.
The refractive index of the medium must be 1.5.
Teacher's Note: The negative focal length shows the lens behaves as diverging in a medium denser than the glass.
Exam Note: Use fa/fm ratio; plane sheet means μm = μg.
Question 10. A converging lens has a focal length of 20 cm in air. It is made of a material of refractive index 1.6. If it is immersed in a liquid of refractive index 1.3, find its new focal length. [CBSE (F) 2017]
Solution.
For a thin lens with the same medium on both sides, 1/feq = (μnet − 1)(1/R1 − 1/R2), where μnet = μlens/μmed.
In the liquid: 1/feq = (1.6/1.3 − 1)[1/R1 − 1/R2] …(i)
In air: 1/20 = (1.6 − 1)[1/R1 − 1/R2] ⇒ [1/R1 − 1/R2] = 1/(20 × 0.6) = 1/12
Substituting in (i): 1/feq = (0.3/1.3)(1/12) ⇒ feq = 12 × 1.3/0.3 = 52 cm
Teacher's Note: First get the curvature factor from the air focal length, then apply the relative refractive index.
Exam Note: Find 1/R1 − 1/R2 = 1/12, then f = 52 cm.
Question 11. Determine the value of the angle of incidence for a ray of light travelling from a medium of refractive index μ₁ = √2 into the medium of refractive index μ₂ = 1, so that it just grazes along the surface of separation. [CBSE (F) 2017]
Solution.
According to Snell's law, μ1 sin i = μ2 sin r.
For grazing emergence r = 90°: √2 sin θ = 1 × sin 90°
sin θ = 1/√2 ⇒ θ = 45°
Teacher's Note: Grazing emergence means refraction angle 90°, so the incidence angle equals the critical angle.
Exam Note: Use μ1 sin i = μ2 sin 90° to get 45°.
Question 12. An illuminated object and a screen are placed 90 cm apart. Determine the focal length and nature of the lens required to produce a clear image on the screen, twice the size of the object. [CBSE (AI) 2010]
Solution.
Given u + v = 90 cm (numerically) …(i)
The image is real (formed on a screen) and twice the size of the object: m = |v|/|u| = 2, so |v| = 2|u| …(ii)
From (i) and (ii): |u| = 30 cm, |v| = 60 cm.
By sign convention u = −30 cm, v = +60 cm.
1/f = 1/v − 1/u = 1/60 + 1/30 = 3/60 ⇒ f = 20 cm (convex lens)
Teacher's Note: A real image on a screen needs a converging lens, and m = v/u fixes the two distances.
Exam Note: Solve u + v = 90, v = 2u; f = 20 cm convex.
Question 13. A convex lens of focal length 20 cm is placed coaxially with a convex mirror of radius of curvature 20 cm. The two are kept at 15 cm from each other. A point object lies 60 cm in front of the convex lens. Draw a ray diagram to show the formation of the image by the combination. Determine the nature and position of the image formed. [CBSE (AI) 2014]
Solution.
For the convex lens: f = +20 cm, u = −60 cm.
1/f = 1/v − 1/u ⇒ 1/v = 1/20 − 1/60 = 1/30 ⇒ v = +30 cm
In the absence of the mirror, the lens would have formed the image I′ at 30 cm from the lens. I′ acts as a virtual object for the convex mirror.
u2 = distance of the virtual object I′ from the mirror = +30 cm − 15 cm = +15 cm
Focal length of the mirror f = R/2 = +20/2 = +10 cm
Mirror formula: 1/f = 1/v2 + 1/u2 ⇒ 1/v2 = 1/10 − 1/15 = 1/30 ⇒ v2 = +30 cm
Hence the final image I is a virtual image formed at a distance of 30 cm to the right of the convex mirror, or 45 cm from the convex lens.
Teacher's Note: The lens image lies behind the convex mirror, so it is a virtual object with positive object distance.
Exam Note: Lens first (v = 30 cm), then mirror with u = +15 cm.
Question 14. A convex lens of focal length 20 cm is placed coaxially with a convex mirror of radius of curvature 20 cm. The two are kept 15 cm apart. A point object is placed 40 cm in front of the convex lens. Find the position of the image formed by this combination. Draw the ray diagram showing the image formation. [CBSE (AI) 2014]
Solution.
For the convex lens: u = −40 cm, f = +20 cm.
1/f = 1/v − 1/u ⇒ 1/v = 1/20 − 1/40 = 1/40 ⇒ v = +40 cm
This image acts as a virtual object for the convex mirror: u = 40 − 15 = +25 cm, and f = R/2 = +10 cm.
Mirror formula: 1/f = 1/v + 1/u ⇒ 1/10 = 1/v + 1/25 ⇒ 1/v = 1/10 − 1/25 = 3/50 ⇒ v = 50/3 ≈ 16.67 cm
Hence the final image is a virtual image formed 16.67 cm behind the convex mirror (that is, 31.67 cm from the lens).
Teacher's Note: Take the lens image as a virtual object at 25 cm behind the mirror for the convex mirror step.
Exam Note: Lens v = 40 cm; mirror u = +25 cm gives v ≈ 16.67 cm.
Question 15. A convex lens of focal length 20 cm is placed coaxially with a concave mirror of focal length 10 cm at a distance of 50 cm apart from each other. A beam of light coming parallel to the principal axis is incident on the convex lens. Find the position of the final image formed by this combination. Draw the ray diagram showing the formation of the image. [CBSE (AI) 2014]
Solution.
For the convex lens: u = ∞, f = 20 cm ⇒ v = 20 cm.
For the concave mirror, the image formed by the lens acts as the object. Hence u = −(50 − 20) cm = −30 cm and f = −10 cm.
Mirror formula: 1/v + 1/u = 1/f ⇒ 1/v = −1/10 + 1/30 = −2/30 ⇒ v = −15 cm
The lens-mirror combination therefore forms a real image I2 at a distance of 15 cm to the left of the concave mirror, i.e. at a distance of 35 cm to the right of the convex lens.
Teacher's Note: The lens focus lies 30 cm in front of the mirror, which is the object position for the mirror.
Exam Note: Lens v = 20 cm; mirror u = −30 cm gives v = −15 cm.
Question 16. In the following diagram, an object O is placed 15 cm in front of a convex lens L₁ of focal length 20 cm and the final image is formed at I at a distance of 80 cm from the second lens L₂. Find the focal length of L₂. [CBSE (F) 2016]
Solution.
Let the focal length of lens L2 be x cm.
For lens L1: u = −15 cm, f = +20 cm. 1/v = 1/f + 1/u = 1/20 − 1/15 = −1/60 ⇒ v = −60 cm, i.e. a virtual image 60 cm from L1 on the object side.
This image acts as the object for L2: u = −60 + (−20) = −80 cm, v = +80 cm (given), f = x cm.
1/x = 1/80 − 1/(−80) = 1/80 + 1/80 = 2/80 ⇒ x = 40
Hence the focal length of L2 is 40 cm.
Teacher's Note: The virtual image of L₁ lies 80 cm from L₂, giving equal object and image distances.
Exam Note: Find v from L1 = −60 cm; then f2 = 40 cm.
Question 17. Find the position of the image formed of an object O by the lens combination given in the figure. [CBSE (F) 2011]
Solution.
For the first lens: u1 = −30 cm, f1 = +10 cm. 1/v1 = 1/f1 + 1/u1 = 1/10 − 1/30 = 2/30 ⇒ v1 = 15 cm.
This means that the image formed by the first lens is 15 cm to the right of the first lens. This image serves as a virtual object for the second lens.
For the second lens: f2 = −10 cm, u2 = 15 − 5 = +10 cm. 1/v2 = 1/f2 + 1/u2 = −1/10 + 1/10 = 0 ⇒ v2 = ∞.
The second lens therefore sends out a parallel beam, which acts as the object at infinity for the third lens.
For the third lens: f3 = +30 cm, u3 = ∞ ⇒ 1/v3 = 1/30 + 1/∞ ⇒ v3 = 30 cm.
The final image is formed 30 cm to the right of the third lens. The ray diagram is shown in the figure.
Teacher's Note: Each lens image becomes the next lens object; a parallel beam between L₂ and L₃ puts the image at f₃.
Exam Note: Apply lens formula three times: 15 cm, ∞, 30 cm.
Question 18. (i) A screen is placed at a distance of 100 cm from an object. The image of the object is formed on the screen by a convex lens for two different locations of the lens separated by 20 cm. Calculate the focal length of the lens used. (ii) A converging lens is kept coaxially in contact with a diverging lens - both the lenses being of equal focal length. What is the focal length of the combination? [CBSE (North) 2016]
Solution.
(i) Let the first position of the lens be x cm from the object, so its image distance is y = (100 − x) cm.
1/f = 1/y − 1/(−x) = 1/y + 1/x …(i)
For the second position the lens is 20 cm farther (object distance x + 20, image distance y − 20): 1/f = 1/(y − 20) + 1/(x + 20) …(ii)
From (i) and (ii): xy = (y − 20)(x + 20) ⇒ −20x + 20y − 400 = 0 ⇒ x − y = −20. Also x + y = 100.
On solving, x = 40 cm and y = 60 cm.
1/f = 1/60 + 1/40 = 5/120 ⇒ f = 24 cm
(Check with the displacement formula f = (D² − d²)/4D = (100² − 20²)/(4 × 100) = 24 cm.)
(ii) 1/f = 1/f1 + 1/f2 = 1/f + (−1/f) = 0 ⇒ f = infinity.
Teacher's Note: The two lens positions are conjugate positions, so object and image distances simply swap between them.
Exam Note: Use the displacement method: f = (D² − d²)/4D = 24 cm.
Question 19. You are given three lenses L₁, L₂ and L₃ each of focal length 20 cm. An object is kept at 40 cm in front of L₁, as shown. The final real image is formed at the focus I of L₃. Find the separations between L₁, L₂ and L₃. [CBSE (AI) 2012]
Solution.
Given f1 = f2 = f3 = 20 cm. For lens L1, u1 = −40 cm: 1/v1 = 1/20 − 1/40 = 1/40 ⇒ v1 = 40 cm.
The final image is formed at the focus of L3, so the rays falling on L3 must be parallel (u3 = ∞). Thus lens L2 should produce its image at infinity.
For this the image formed by L1 must lie at the focus of L2. The image formed by L1 is 40 cm to the right of L1 and must be 20 cm to the left of L2.
Hence the distance between L1 and L2 = 40 + 20 = 60 cm.
As the beam between L2 and L3 is parallel, the distance between L2 and L3 does not matter: it can have any value.
Teacher's Note: A real image at L₃'s focus needs a parallel beam, so L₁'s image must sit at L₂'s focus.
Exam Note: L1L2 = 60 cm; L2L3 any value.
Question 20. A ray PQ incident on the face AB of a prism ABC, as shown in the figure, emerges from the face AC such that AQ = AR. Draw the ray diagram showing the passage of the ray through the prism. If the angle of the prism is 60° and refractive index of the material of the prism is √3, determine the values of angle of incidence and angle of deviation. [CBSE Panchkula 2015]
Solution.
Since AQ = AR, the ray QR inside the prism is parallel to the base BC, so this is the case of minimum deviation: i = e and r1 = r2 = r.
r1 + r2 = A ⇒ 2r = 60° ⇒ r = 30°
μ = sin i / sin r ⇒ √3 = sin i / sin 30° ⇒ sin i = √3/2 ⇒ i = 60°
Using i + e = A + δ: 60° + 60° = 60° + δ ⇒ δ = 60°
Teacher's Note: AQ = AR makes the ray inside parallel to the base, which means symmetric passage and minimum deviation.
Exam Note: Use r = A/2 = 30°, then i = 60°, δ = 60°.
Question 21. A ray PQ incident on the refracting face BA is refracted in the prism BAC as shown in the figure and emerges from the other refracting face AC as RS such that AQ = AR. If the angle of prism A = 60° and refractive index of material of prism is √3, calculate angle θ. [CBSE North 2016]
Solution.
Given AQ = AR, QR is parallel to BC.
At the minimum deviation, the refracted ray inside the prism becomes parallel to its base. Hence θ is the angle of minimum deviation.
μ = sin[(A + θ)/2] / sin(A/2) ⇒ √3 = sin[(60° + θ)/2] / sin 30°
sin[(60° + θ)/2] = √3/2 = sin 60° ⇒ (60° + θ)/2 = 60° ⇒ θ = 60°
Teacher's Note: The angle θ between incident and emergent rays is the angle of deviation, minimum here.
Exam Note: Use μ = sin[(A+δm)/2]/sin(A/2) to get θ = 60°.
Question 22. Figure shows a ray of light passing through a prism. If the refracted ray QR is parallel to the base BC, show that (i) r₁ = r₂ = A/2, (ii) angle of minimum deviation, Dm = 2i − A. [CBSE (F) 2014]
Solution.
(i) We know that r1 + r2 = A. Since QR is parallel to BC, the ray passes symmetrically, so r1 = r2 and i = e.
Therefore 2r1 = A or 2r2 = A ⇒ r1 = r2 = A/2.
(ii) Dm = deviation at the first face + deviation at the second face
= (i − r1) + (e − r2) = (i + e) − (r1 + r2)
= 2i − A (since i = e)
Teacher's Note: Each face deviates the ray by (angle outside minus angle inside); summing gives i + e − A.
Exam Note: Use r1 + r2 = A and deviation = (i+e) − A.
Question 23. A compound microscope uses an objective lens of focal length 4 cm and eyepiece lens of focal length 10 cm. An object is placed at 6 cm from the objective lens. Calculate the magnifying power of the compound microscope. Also calculate the length of the microscope. [CBSE (AI) 2011]
Solution.
Given fo = 4 cm, fe = 10 cm, uo = −6 cm. (The final image is taken at the least distance of distinct vision D = 25 cm.)
Objective: 1/vo = 1/fo + 1/uo = 1/4 − 1/6 = 1/12 ⇒ vo = 12 cm
Magnifying power M = (vo/uo)(1 + D/fe) = −(12/6)(1 + 25/10) = −2 × 3.5 = −7 (the negative sign shows that the image is inverted).
Eyepiece: 1/fe = 1/ve − 1/ue with ve = −25 cm: 1/ue = −1/25 − 1/10 = −7/50 ⇒ ue = −50/7 = −7.14 cm
Length of the microscope L = |vo| + |ue| = 12 + 7.14 = 19.14 cm
Teacher's Note: The first image from the objective is the object for the eyepiece; add their distances for the tube length.
Exam Note: M = mome = −7; L = vo + |ue| = 19.14 cm.
Question 24. You are given two converging lenses of focal lengths 1.25 cm and 5 cm to design a compound microscope. If it is desired to have a magnification of 30, find out the separation between the objective and the eyepiece. [CBSE Allahabad 2015]
Solution.
The magnification due to the objective lens mo = vo/(−uo). If the object is close to the focus of the objective lens, then uo ≈ fo and vo ≈ L (the distance between the two lenses), so mo = L/fo.
If the final image is at the near point (D = 25 cm), the magnification due to the eyepiece is me = 1 + D/fe.
M = mo × me = (L/fo)(1 + D/fe). With fo = 1.25 cm and fe = 5 cm:
30 = (L/1.25)(1 + 25/5) = (L/1.25) × 6 ⇒ L = 30 × 1.25/6 = 6.25 cm
The separation between the two lenses is 6.25 cm.
Teacher's Note: With the object near the objective focus, the tube length L stands in for the objective image distance.
Exam Note: Use M = (L/fo)(1 + D/fe) with D = 25 cm.
Question 25. The total magnification produced by a compound microscope is 20. The magnification produced by the eye piece is 5. The microscope is focussed on a certain object. The distance between the objective and eyepiece is observed to be 14 cm. If least distance of distinct vision is 20 cm, calculate the focal length of the objective and the eye piece. [CBSE Delhi 2014]
Solution.
Here m = −20, me = 5, ve = −20 cm (final image at the least distance of distinct vision).
For the eyepiece: me = ve/ue ⇒ 5 = −20/ue ⇒ ue = −4 cm
Lens formula: 1/fe = 1/ve − 1/ue = −1/20 + 1/4 = 4/20 ⇒ fe = 5 cm
Total magnification m = me × mo ⇒ −20 = 5 × mo ⇒ mo = −4
Also |vo| + |ue| = 14 ⇒ vo = 14 − 4 = 10 cm
mo = 1 − vo/fo ⇒ −4 = 1 − 10/fo ⇒ fo = 2 cm
Teacher's Note: Eyepiece data fix f_e first; then the tube length gives the objective image distance.
Exam Note: Get fe = 5 cm, vo = 10 cm, fo = 2 cm.
Question 26. A small telescope has an objective lens of focal length 150 cm and eyepiece of focal length 5 cm. What is the magnifying power of the telescope for viewing distant objects in normal adjustment? If this telescope is used to view a 100 m tall tower 3 km away, what is the height of the image of the tower formed by the objective lens? [CBSE Allahabad 2015]
Solution.
In normal adjustment, i.e. when the final image is at infinity, M = fo/fe = 150/5 = 30.
The tower, 3 km from the objective lens of focal length 150 cm, forms its image at a distance vo given by
1/fo = 1/vo − 1/uo ⇒ 1/150 cm = 1/vo + 1/(300000 cm)
vo ≈ 150 cm = 1.5 m
Magnification by the objective mo = hi/ho = vo/|uo| = 1.5 m / 3000 m
hi = 100 m × 1.5/3000 = 0.05 m = 5 cm (inverted).
Teacher's Note: A very distant object forms its image almost at the focus of the objective.
Exam Note: M = fo/fe = 30; hi = 5 cm.
Question 27. An object is placed 40 cm from a convex lens of focal length 30 cm. If a concave lens of focal length 50 cm is introduced between the convex lens and the image formed such that it is 20 cm from the convex lens, find the change in the position of the image. [CBSE Chennai 2015] [HOTS]
Solution.
For the convex lens: f1 = +30 cm, u1 = −40 cm. 1/v1 = 1/30 − 1/40 = 1/120 ⇒ v1 = +120 cm, a real image is formed.
On introducing the concave lens, f2 = −50 cm and u2 = 120 − 20 = +100 cm from the concave lens (the image of the convex lens now acts as a virtual object).
1/v2 = 1/f2 + 1/u2 = −1/50 + 1/100 = −1/100 ⇒ v2 = −100 cm
A virtual image is formed at a distance of 100 cm from the concave lens, on its left.
The change in the position of the image is 100 cm + 100 cm = 200 cm, to the left of its original position.
Teacher's Note: The concave lens meets converging rays, so u₂ is positive and the image moves back towards the lenses.
Exam Note: Real image at 120 cm shifts 200 cm to the left.
Question 28. A convex lens of focal length f₁ is kept in contact with a concave lens of focal length f₂. Find the focal length of the combination. [CBSE (AI) 2013]
Solution.
For the convex lens of focal length +f1, the object O gives an image I′ at distance v′: +1/f1 = 1/v′ − 1/u …(i)
For the concave lens of focal length −f2 (the lenses are thin and in contact, so I′ is the object for the second lens): −1/f2 = 1/v − 1/v′ …(ii)
Adding (i) and (ii): 1/f1 − 1/f2 = 1/v − 1/u …(iii)
For the equivalent single lens, 1/f = 1/v − 1/u, where f is the focal length of the combination …(iv)
From (iii) and (iv): 1/f = 1/f1 − 1/f2, i.e. f = f1f2/(f2 − f1) (f1, f2 being magnitudes). The combination is converging if f2 > f1.
Teacher's Note: Powers of thin lenses in contact add, with the concave lens contributing negative power.
Exam Note: Add lens equations to get 1/f = 1/f1 − 1/f2.
Question 29. A biconvex lens with its two faces of equal radius of curvature R is made of a transparent medium of refractive index μ₁. It is kept in contact with a medium of refractive index μ₂ as shown in the figure. (a) Find the equivalent focal length of the combination. (b) Obtain the condition when this combination acts as a diverging lens. (c) Draw the ray diagram for the case μ₁ > (μ₂ + 1)/2, when the object is kept far away from the lens. Point out the nature of the image formed by the system. [CBSE Patna 2015] [HOTS]
Solution.
(a) For refraction at the first surface (air to μ1, radius +R): μ1/v1 − 1/u = (μ1 − 1)/R …(i)
At the second surface (μ1 to μ2, radius −R), the image of the first surface acts as the object: μ2/v − μ1/v1 = (μ2 − μ1)/(−R) …(ii)
Adding (i) and (ii): μ2/v − 1/u = (2μ1 − μ2 − 1)/R
For rays coming from infinity, u = −∞ and v = f: μ2/f = (2μ1 − μ2 − 1)/R ⇒ f = μ2R/(2μ1 − μ2 − 1)
(b) The combination acts as a diverging system if f < 0, i.e. 2μ1 − μ2 − 1 < 0 ⇒ 2μ1 < μ2 + 1 ⇒ μ1 < (μ2 + 1)/2.
(c) If the combination behaves as a converging lens then f > 0, which is possible only when 2μ1 − μ2 − 1 > 0, i.e. μ1 > (μ2 + 1)/2. Parallel rays from a distant object then converge to a point in medium μ2; the nature of the image formed is real (figure).
Teacher's Note: The combination's focal length sign is set by 2μ₁ − μ₂ − 1, the sum of the two surface powers.
Exam Note: Add two surface equations; f < 0 when μ1 < (μ2+1)/2.
Question 30. Three rays (1, 2, 3) of different colours fall normally on one of the sides of an isosceles right angled prism as shown. The refractive index of prism for these rays is 1.39, 1.47 and 1.52 respectively. Find which of these rays get internally reflected and which get only refracted from AC. Trace the paths of rays. Justify your answer with the help of necessary calculations. [CBSE (F) 2016] [HOTS]
Solution.
The rays are incident perpendicularly on face AB, so they pass into the prism undeviated. On face AC the angle of incidence is i = 45°.
For total internal reflection: angle of incidence > critical angle, i.e. 45° > ic ⇒ sin 45° > sin ic = 1/μ
1/√2 > 1/μ ⇒ μ > √2 = 1.414
Ray 1 (μ = 1.39 < 1.414): ic ≈ 46° > 45°, so it is not totally reflected; ray 1 is refracted out of AC.
Ray 2 (μ = 1.47) and ray 3 (μ = 1.52) have ic ≈ 42.9° and 41.2°, both less than 45°, so rays 2 and 3 undergo total internal reflection, turn through 90° and emerge normally through BC (figure).
Teacher's Note: Compare each colour's critical angle with the 45° incidence; only μ above √2 gives total reflection.
Exam Note: Condition for TIR at 45°: μ > √2 = 1.414.
Question 31. A ray of light incident on one of the faces of a glass prism of angle A has angle of incidence 2A. The refracted ray in the prism strikes the opposite face which is silvered, the reflected ray from it retracing its path. Trace the ray diagram and find the relation between the refractive index of the material of the prism and the angle of the prism. [CBSE Chennai 2015] [HOTS]
Solution.
The reflected ray retraces its path, so the refracted ray inside the prism must strike the silvered face AZ normally.
In the quadrilateral formed by the normal at Q, the ray QR and the faces, the angle between the normal to the face AY and the ray is r, and the face AZ is perpendicular to QR; geometry gives r = A …(ii)
From Snell's law, μ = sin i / sin r = sin 2A / sin r …(i)
From (i) and (ii): μ = sin 2A / sin A = 2 sin A cos A / sin A = 2 cos A
Hence A = cos⁻¹(μ/2).
Teacher's Note: Retracing means normal incidence on the silvered face, which forces the refraction angle to equal A.
Exam Note: Use r = A, i = 2A: μ = sin 2A/sin A = 2 cos A.
Question 32. A ray PQ incident normally on the refracting face BA is refracted in the prism BAC made of material of refractive index 1.5. Complete the path of ray through the prism. From which face will the ray emerge? Justify your answer. [CBSE Central 2016] [HOTS]
Solution.
For face AB, i = 0°, so r = 0°: the ray passes through AB undeviated.
At face AC the angle of incidence is 30° (the angle of the prism is A = 30°, so the ray inside meets the normal at 30°).
The critical angle is ic = sin⁻¹(1/μ) = sin⁻¹(2/3) = sin⁻¹(0.66) ≈ 41.8°.
The angle of incidence 30° is less than ic, hence the ray is refracted (no total internal reflection) and emerges from the face AC.
Applying Snell's law at face AC: sin 30° × 3/2 = sin r × 1 ⇒ sin r = 3/4 ⇒ r = sin⁻¹(0.75) ≈ 48.6°. Clearly r > i, as the ray passes from the denser to the rarer medium, so it bends away from the normal.
Teacher's Note: Normal incidence leaves the ray straight; compare 30° with the critical angle at the second face.
Exam Note: Show 30° < ic = 41.8°; ray emerges from AC.
Question 33. Trace the path of a ray of light passing through a glass prism (ABC) as shown in the figure. If the refractive index of glass is √3, find out of the value of the angle of emergence from the prism. [CBSE (F) 2012] [HOTS]
Solution.
Given μ = √3. The ray is incident normally on face AC, so i = 0° and r = 0°: it passes undeviated into the prism (sin i/sin r = μg/μa gives r = 0).
At the interface AB the angle of incidence is 30° (from the figure). Applying Snell's law from glass to air:
sin 30° / sin e = μa/μg = 1/√3 ⇒ sin e = √3 sin 30° = √3/2 ⇒ e = 60°
The critical angle sin⁻¹(1/√3) ≈ 35.3° exceeds 30°, so the ray does emerge (it is refracted away from the normal) (figure).
Teacher's Note: No bending at the normal-incidence face; Snell's law at the second face gives the emergence angle.
Exam Note: Apply Snell's law at AB: sin e = √3 sin 30°.
Question 34. (i) A ray of light incident on face AB of an equilateral glass prism, shows minimum deviation of 30°. Calculate the speed of light through the prism. (ii) Find the angle of incidence at face AB so that the emergent ray grazes along the face AC. [CBSE Delhi 2017] [HOTS]
Solution.
(i) Here A = 60° and δm = 30°.
μ = sin[(A + δm)/2] / sin(A/2) = sin 45° / sin 30° = √2
Speed of light in the prism v = c/μ = (3 × 10⁸)/√2 ≈ 2.12 × 10⁸ m/s
(ii) At face AC let the angle of incidence be r2. For a grazing ray the angle of emergence is e = 90°.
μ = 1/sin r2 ⇒ sin r2 = 1/√2 ⇒ r2 = 45°
Let the angle of refraction at face AB be r1. Now r1 + r2 = A ⇒ r1 = 60° − 45° = 15°.
Let the angle of incidence at AB be i: μ = sin i / sin r1 ⇒ √2 = sin i / sin 15°
i = sin⁻¹(√2 sin 15°) ≈ 21.5°
Teacher's Note: Grazing emergence means incidence at the second face equals the critical angle.
Exam Note: μ = √2 from δm; then r2 = 45°, r1 = 15°.
Question 35. (i) For a glass prism (μ = √3) the angle of minimum deviation is equal to the angle of the prism. Find the angle of the prism. (ii) Draw ray diagram when incident ray falls normally on one of the two equal sides of a right angled isosceles prism having refractive index μ = √3. [CBSE South 2016] [HOTS]
Solution.
(i) At minimum deviation μ = sin[(A + δm)/2] / sin(A/2). Given δm = A:
μ = sin A / sin(A/2) = 2 sin(A/2) cos(A/2) / sin(A/2) = 2 cos(A/2)
√3 = 2 cos(A/2) ⇒ cos(A/2) = √3/2 ⇒ A/2 = 30° ⇒ A = 60°
(ii) The ray enters the equal face normally and goes undeviated to the hypotenuse, where the angle of incidence is 45°. The critical angle is sin⁻¹(1/√3) ≈ 35.3°, which is less than 45°, so the ray is totally internally reflected, turns through 90° and emerges normally from the other equal face (figure).
Teacher's Note: Setting δ_m = A in the prism formula reduces it to μ = 2cos(A/2).
Exam Note: Use μ = 2cos(A/2) = √3; draw TIR at hypotenuse.
Question 36. An equiconvex lens of focal length 'f' is cut into two identical plane convex lenses. How will the power of each part be related to the focal length of the original lens? A double convex lens of +5D is made of glass of refractive index 1.55 with both faces of equal radii of curvature. Find the value of its radius of curvature.
Solution.
(a) Power of a lens P = 1/f (f in metre). For the equiconvex lens, 1/f = (μ − 1)(1/R + 1/R) = 2(μ − 1)/R. Each plano-convex half has 1/f′ = (μ − 1)(1/R + 1/∞) = (μ − 1)/R = 1/(2f).
So the power of each part is half the power of the original lens, P′ = 1/(2f), and its focal length is 2f.
(b) P = +5 D ⇒ f = 1/5 m = 20 cm.
Lens maker's formula with R1 = +R, R2 = −R: 1/f = (μ − 1)(2/R) ⇒ 1/20 = (1.55 − 1) × 2/R
R = 2 × 0.55 × 20 = 22 cm (radius of curvature R = 22 cm)
Teacher's Note: Cutting an equiconvex lens along its axis plane leaves one curved surface, halving the power.
Exam Note: P′ = P/2, f′ = 2f; R = 2(μ−1)f = 22 cm.
Question 37. Two lenses of power 10 D and −5 D are placed in contact. (i) Calculate the power of lens combination. (ii) Where should an object be held from the lens, so as to obtain a virtual image of magnification 2?
Solution.
(i) Given P1 = 10 D, P2 = −5 D. Power of the combination P = P1 + P2 = 10 D − 5 D = 5 D.
(ii) Focal length of the combination (convergent lens) f = 1/P = 1/5 m = 0.20 m = 20 cm.
Magnification m = v/u = +2 ⇒ v = 2u. Lens formula (u is negative): 1/f = 1/v − 1/u
1/20 = 1/(2u) − 1/u = −1/(2u) ⇒ u = −10 cm
The object should be held 10 cm from the lens (inside its focal length).
Teacher's Note: A convex lens gives a virtual magnified image only when the object lies between the lens and its focus.
Exam Note: P = 5 D, f = 20 cm; v = 2u gives u = −10 cm.
Question 38. Figure shows a plane mirror M placed at a distance of 10 cm from a concave lens L. A point object is placed at a distance of 60 cm from the lens. The image formed due to refraction by the lens and reflection by the mirror is 30 cm behind the mirror. What is the focal length of this lens?
Solution.
The rays coming from O diverge on passing through the concave lens and get reflected from the mirror; they appear to come from the image I1 such that MI1 = MI2 = 30 cm.
LI2 = MI2 − ML = 30 − 10 = 20 cm.
I2 is the position of the object for the plane mirror. Let I2 also be the position of the virtual image of the object formed by the concave lens alone.
For the lens, u = −60 cm and v = −20 cm. 1/f = 1/v − 1/u = −1/20 + 1/60 = −2/60
f = −30 cm
Teacher's Note: The plane mirror's image is as far behind it as the lens image is in front; that gives v.
Exam Note: Mirror symmetry gives v = −20 cm; lens formula gives f = −30 cm.
Question 39. The critical angle for a given piece of glass is 45°. Calculate the polarising angle for it. Also calculate the angle of refraction when light is incident on this glass at an angle of incidence equal to ip. [HOTS]
Solution.
sin ic = 1/μ ⇒ μ = 1/sin 45° = √2
According to Brewster's law, tan ip = μ = √2 ⇒ ip = tan⁻¹(1.414) ≈ 54.7° (54° 44′)
When light is incident at the polarising angle, ip + r = 90° ⇒ r = 90° − 54.7° = 35.3° (35° 16′)
Teacher's Note: At the polarising angle the reflected and refracted rays are perpendicular, so r = 90° − i_p.
Exam Note: Find μ = √2, then tan ip = μ, r = 90° − ip.
Question 40. A double convex lens, made from a material of refractive index μ₁, is immersed in a liquid of refractive index μ₂ where μ₂ > μ₁. What change, if any, would occur in the nature of the lens? [HOTS]
Solution.
Focal length of the lens (refractive index μ1) in a liquid of refractive index μ2: 1/fl = (μ1/μ2 − 1)(1/R1 − 1/R2), i.e. fl = [(μ1 − 1)/(μ1/μ2 − 1)] fa.
Given μ2 > μ1, i.e. μ1/μ2 < 1, so fl = −[(μ1 − 1)/(1 − μ1/μ2)] fa.
So the focal length of the lens in the liquid has the opposite sign to its focal length in air, i.e. the nature of the lens changes: the lens would now behave like a diverging (concave) lens.
Teacher's Note: A lens optically rarer than its surroundings bends light the opposite way, so convex becomes diverging.
Exam Note: Relative index μ1/μ2 < 1 reverses the sign of f.
Question 41. Draw a plot showing the variation of power of a lens with the wavelength of the incident light. [HOTS]
Solution.
Refractive index of the lens material μ = A + B/λ², where λ is the wavelength.
Power of a lens P = 1/f = (μ − 1)(1/R1 − 1/R2). Clearly, the power of a lens ∝ (μ − 1).
This implies that the power of the lens decreases with increase of wavelength (P ∝ 1/λ² nearly). The plot is shown in the figure: a falling curve, high for violet and low for red.
Teacher's Note: Longer wavelengths see a smaller refractive index, so lens power falls steadily with wavelength.
Exam Note: Draw decreasing curve; state P ∝ (μ − 1), μ = A + B/λ².
Question 42. A right angled prism of refractive index n has a plane of refractive index n₁ so that n₁ < n, cemented to its diagonal face. The assembly is in air. A ray is incident on AB. (a) Calculate the angle of incidence at AB for which the ray strikes the diagonal face at the critical angle. (b) Assuming n = 1.352, calculate the angle of incidence at AB for which the refracted ray passes through the diagonal face undeviated.
Solution.
(a) At the diagonal face the critical angle C is given by sin C = n1/n.
In the triangle formed at the diagonal face, the angle of refraction at AB is r1 = 45° − C.
sin i = n sin r1 = n sin(45° − C) = (n/√2)(cos C − sin C) = (1/√2)(√(n² − n1²) − n1)
i = sin⁻¹[(1/√2)(√(n² − n1²) − n1)]
(b) For the ray to pass the diagonal face undeviated it must meet it normally, so r1 = 45°.
sin i = n sin r1 = 1.352 × sin 45° = 0.956 ⇒ i = sin⁻¹(0.956) ≈ 73°
Teacher's Note: Undeviated passage means normal incidence on the diagonal face, fixing r₁ = 45°.
Exam Note: Use r1 = 45° − C in (a); r1 = 45° in (b).
Question 43. A lens forms a real image of an object. The distance from the object to the lens is u cm and the distance of the image from the lens is v cm. The given graph shows variation of v with u. (i) What is the nature of the lens? (ii) Using the graph, find the focal length of this lens.
Solution.
(i) The lens is convex (converging) because the image formed by the lens is real.
(ii) Focal length: from the graph, when u = −40 cm, v = 15 cm (the points (40, 15) and (15, 40) lie on the curve).
1/f = 1/v − 1/u (for a lens) = 1/15 + 1/40 = (40 + 15)/(40 × 15) = 55/600
f = 600/55 = 120/11 ≈ 11 cm
Teacher's Note: A real image on the opposite side needs a converging lens; each (u, v) point gives f by lens formula.
Exam Note: Convex lens; read (40, 15) and apply 1/f = 1/v + 1/|u|.
Question 44. (a) An equiconvex lens with radii of curvature of magnitude r each, is put over a liquid layer poured on top of a plane mirror. A small needle, with its tip on the principal axis of the lens, is moved along the axis until its inverted real image coincides with the needle itself. The distance of the needle from the lens is measured to be 'a'. On removing the liquid layer and repeating the experiment the distance is found to be 'b'. Given that two values of distances measured represent the focal length values in the two cases, obtain a formula for the refractive index of the liquid. (b) If r = 10 cm, a = 15 cm, b = 10 cm, find the refractive index of the liquid. [HOTS]
Solution.
(a) Without the liquid the combination is the glass lens alone, with focal length f1 = b. For the equiconvex lens 1/f1 = (n − 1)(1/r + 1/r) = 2(n − 1)/r, so 1/b = 2(n − 1)/r.
The liquid layer forms a plano-concave lens of refractive index nl, with 1/f2 = (nl − 1)(−1/r − 1/∞) = −(nl − 1)/r, i.e. f2 = −r/(nl − 1).
The glass lens and the liquid lens are in contact, so 1/f = 1/f1 + 1/f2. Given f = a:
1/a = 1/b − (nl − 1)/r ⇒ (nl − 1)/r = 1/b − 1/a ⇒ nl − 1 = r(1/b − 1/a)
Refractive index of the liquid nl = 1 + r/b − r/a
(b) nl = 1 + 10/10 − 10/15 = 1 + 1 − 2/3 = 4/3 ≈ 1.33
Teacher's Note: The needle coincides with its image when it is at the focus of the lens-liquid combination over the mirror.
Exam Note: Add powers: 1/a = 1/b − (nl − 1)/r; nl = 4/3.
Free study material for Physics
Step-by-Step Xam Idea Solutions for Class 12 Math
Chapter-wise Xam Idea Solutions: Xam Idea Solutions Class 12 Physics Chapter 9 Ray Optics And Optical Instruments Short Answer Questions II
Review detailed solutions for Class 12 Mathematics. The Xam Idea Solutions Class 12 Physics Chapter 9 Ray Optics And Optical Instruments Short Answer Questions II PDF provides comprehensive answers mapped to standard Xam Idea Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.
Concept-Driven Math Answers
Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.
Explore More Study Resources for Class 12 Math
Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.
FAQs
They are chapter-wise solved questions from the book for Class 12 Physics. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.