Xam Idea Solutions Class 12 Physics Chapter 6 Electromagnetic Induction Short Answer Questions II

Official Textbook Solutions: Class 12 Physics Chapter 06 Electromagnetic Induction

Explore reliable textbook solutions for Chapter 06 Electromagnetic Induction tailored for Class 12 learners using methodologies. Utilizing these Physics answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.

Chapter-wise Solutions for Physics: Chapter 06 Electromagnetic Induction

View or download the dedicated Chapter 06 Electromagnetic Induction solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Physics.

Short Answer Questions II

Question 1. In an experimental arrangement of two coils C1 and C2 placed coaxially parallel to each other, find out the expression for the emf induced in the coil C1 (of N1 turns) corresponding to the change of current I2 in the coil C2 (of N2 turns). [CBSE Chennai 2015]

C1C2I2

Solution.

Let φ1 be the flux through each turn of coil C1 (of N1 turns) when current in coil C2 is I2. Then, we have

N1φ1 = MI2   …(i)

For current varying with time,

d(N1φ1)/dt = d(MI2)/dt   …(ii)

Since induced emf in coil C1 is given by

ε1 = –d(N1φ1)/dt

From (ii), –ε1 = M(dI2/dt)

ε1 = –M dI2/dt   [from (i)]

It shows that varying current in a coil induces emf in the neighbouring coil.

Teacher's Note: Flux linked with C1 is proportional to I2 through M, so changing I2 induces emf –M dI2/dt in C1.

Exam Note: Start from N1φ1 = M I2.

Question 2. Answer the following questions
(1) How does the mutual inductance of a pair of coils change when
(i) Distance between the coils is increased and
(ii) Number of turns in the coils is increased? [CBSE (AI) 2013]
(2) A plot of magnetic flux (φ) versus current (I), is shown in the figure for two inductors A and B. Which of the two has large value of self-inductance? [CBSE Delhi 2010]

IφAB
(3) How is the mutual inductance of a pair of coils affected when
(i) Separation between the coils is increased?
(ii) The number of turns in each coil is increased?
(iii) A thin iron sheet is placed between the two coils, other factors remaining the same?
Justify your answer in each case. [CBSE (AI) 2013]

Solution.

(1) (i) Mutual inductance decreases.

(ii) Mutual inductance increases.

Concept: (i) If distance between two coils is increased as shown in figure,

C1C2d

it causes decrease in magnetic flux linked with the coil C2. Hence induced emf in coil C2 decreases by relation ε2 = –M dI1/dt. Hence mutual inductance decreases.

(ii) From relation M21 = μ0n1n2Al, if number of turns in one of the coils or both increases, mutual inductance will increase.

(2) φ = LI, so L is the slope of the φ–I line. For the same current φA > φB, hence LA > LB, i.e., inductor A has the larger self-inductance.

(3) (i) Decreases: with greater separation less of the flux of one coil links the other.

(ii) Increases: M ∝ N1N2, so more turns in each coil means a larger flux linkage.

(iii) Increases: the iron sheet (high permeability) strengthens the flux linking the two coils.

Teacher's Note: Mutual inductance falls as flux linkage weakens with distance and rises with turns and a magnetic medium.

Exam Note: Justify each case via flux linkage.

Question 3. Define self-inductance of a coil. Show that magnetic energy required to build up the current I in a coil of self-inductance L is given by ½LI2. [CBSE Delhi 2012]
OR
Define the term self-inductance of a solenoid. Obtain the expression for the magnetic energy stored in an inductor of self-inductance L to build up a current I through it. [CBSE (AI) 2014]

Solution.

Self-inductance – Using formula φ = LI, if I = 1 ampere then L = φ.

Self-inductance of the coil is equal to the magnitude of the magnetic flux linked with the coil, when a unit current flows through it.

Alternatively

Using formula |ε| = L dI/dt. If dI/dt = 1 A/s then L = |ε|.

Self-inductance of the coil is equal to the magnitude of induced emf produced in the coil itself, when the current varies at rate 1 A/s.

Expression for magnetic energy

B or φ−εIncreasing current

When a time varying current flows through the coil, back emf (–ε) produces, which opposes the growth of the current flow. It means some work needs to be done against induced emf in establishing a current I. This work done will be stored as magnetic potential energy.

For the current I at any instant, the rate of work done is

dW/dt = (–ε)I

Only for inductive effect of the coil |–ε| = L dI/dt

∴ dW/dt = L(dI/dt)I ⇒ dW = LI dI

From work-energy theorem

dU = LI dI

∴ U = ∫0I LI dI = ½LI2

Teacher's Note: Work done against back emf while current grows from 0 to I is stored as magnetic energy.

Exam Note: Integrate L I dI from 0 to I.

Question 4. Two identical loops, one of copper and the other of aluminium, are rotated with the same angular speed in the same magnetic field. Compare [CBSE (AI) 2010]
(i) The induced emf and
(ii) The current produced in the two coils. Justify your answer.

Solution.

(i) Induced emf, ε = –dφ/dt = –d/dt (BA cos ωt) = BAω sin ωt

As B, A, ω are same for both loops, so induced emf is same in both loops.

(ii) Current induced, I = ε/R = ε/(ρl/a) = εa/(ρl) (where l is the length and a the cross-section of the wire of the loop)

As the wire cross-section a, length l and emf ε are same for both loops but resistivity ρ is less for copper, therefore current I induced is larger in copper loop.

Teacher's Note: Emf depends only on B, loop area and angular speed; current also depends on resistance, lower in copper.

Exam Note: Same emf; larger current in copper.

Question 5. A wheel with 8 metallic spokes each 50 cm long is rotated with a speed of 120 rev/min in a plane normal to the horizontal component of the Earth’s magnetic field. The Earth’s magnetic field at the plane is 0.4 G and the angle of dip is 60°. Calculate the emf induced between the axle and the rim of the wheel. How will the value of emf be affected if the number of spokes were increased? [CBSE Delhi 2013]

Solution.

If a rod of length ‘l’ rotates with angular speed ω in uniform magnetic field ‘B’

ε = ½Bl2ω

In case of earth’s magnetic field BH = |Be| cos δ and BV = |Be| sin δ

∴ ε = ½|Be| cos δ · l2ω

= ½ × 0.4 × 10–4 cos 60° × (0.5)2 × 2πν

= ½ × 0.4 × 10–4 × ½ × (0.5)2 × 2π × (120 rev/60 s)

= 10–5 × 0.25 × 2 × 3.14 × 2

= 3.14 × 10–5 volt

Induced emf is independent of the number of spokes i.e., it remain same.

Teacher's Note: Each spoke cuts B_H = B cos 60°; spokes are in parallel, so emf does not change.

Exam Note: Use B_H = B cos dip with ω = 4π rad/s.

Question 6. A circular coil of radius 10 cm, 500 turns and resistance 200 Ω is placed with its plane perpendicular to the horizontal component of the Earth’s magnetic field. It is rotated about its vertical diameter through 180° in 0.25 s. Estimate the magnitudes of the emf and current induced in the coil. (Horizontal component of the Earth’s magnetic field at the place is 3.0 × 10–5 T) [CBSE (F) 2015]

Initialn̂BAfter 180°n̂B

Solution.

Initial magnetic flux, φi = NBA

= 500 × 3 × 10–5 × π (0.1)2

= 15π × 10–5 Wb

On turning by 180°,

Final flux, φf = –NBA = –15π × 10–5 Wb

Magnitude of induced emf, ε = |Δφ|/Δt

= (2 × 15π × 10–5)/0.25 = 120π × 10–5 volt

= 376.8 × 10–5 V = 3.8 × 10–3 V

Induced current, I = ε/R = (3.77 × 10–3)/200 = 1.9 × 10–5 A

Teacher's Note: A 180-degree turn reverses the normal, so flux change is 2NBA, giving millivolt-level emf.

Exam Note: Flux change is 2NBA, not NBA.

Question 7. A magnet is quickly moved in the direction indicated by an arrow between two coils C1 and C2 as shown in the figure. What will be the direction of induced current in each coil as seen from the magnet? Justify your answer. [CBSE Delhi 2011]

C1C2NSSS

Solution.

According to Lenz’s law, the direction of induced current is such that it opposes the relative motion between coil and magnet.

The near face of coil C1 will become S-pole, so the direction of current in coil C1 will be clockwise.

The near face of coil C2 will also become S-pole to oppose the approach of magnet, so the current in coil C2 will also be clockwise.

Teacher's Note: C1 attracts the receding N-pole and C2 repels the approaching S-pole, so both show S faces: clockwise.

Exam Note: Name pole on each coil, then sense.

Question 8. The currents flowing in the two coils of self-inductance L1 = 16 mH and L2 = 12 mH are increasing at the same rate. If the power supplied to the two coils are equal, find the ratio of [CBSE (F) 2014]
(i) Induced voltages
(ii) The currents and
(iii) The energies stored in the two coils at a given instant.

Solution.

(i) Induced voltage (emf) in the coil, ε = –L dI/dt

∴ ε1/ε2 = (–L1 dI/dt)/(–L2 dI/dt) = L1/L2 = 16 mH/12 mH = 4/3

(ii) Power supplied, P = εI

Since power is same for both the coils

∴ ε1I1 = ε2I2 ⇒ I1/I2 = ε2/ε1 = 3/4

(iii) Energy stored in the coil is given by U = ½LI2

∴ U1/U2 = (½L1I12)/(½L2I22) = (L1/L2) × (I1/I2)2 = (4/3) × (3/4)2 = 3/4

Teacher's Note: Equal dI/dt gives emf ratio L1:L2; equal power inverts it for currents; energy follows ½LI².

Exam Note: Ratios: 4:3, 3:4 and 3:4.

Question 9. Figure shows a rectangular loop conducting PQRS in which the arm PQ is free to move. A uniform magnetic field acts in the direction perpendicular to the plane of the loop. Arm PQ is moved with a velocity v towards the arm RS. Assuming that the arms QR, RS and SP have negligible resistances and the moving arm PQ has the resistance r, obtain the expression for
(i) The current in the loop
(ii) The force and
(iii) The power required to move the arm PQ.

××××××××××××××××××××vSPQRlB into the plane of the loop

Solution.

(i) Current in the loop PQRS, I = ε/r

Since |ε| = dφ/dt = Blv, so I = Blv/r

(ii) The force required to keep the arm PQ in constant motion

F = BIl = B(Blv/r)l = B2l2v/r

(iii) Power required to move the arm PQ

P = F|v| = (B2l2v/r)|v| = B2l2v2/r

Teacher's Note: Only PQ has resistance r, so I = Blv/r; the external force balances the magnetic drag on PQ.

Exam Note: Chain: emf, current, force, power.

Question 10. A rod of length l is moved horizontally with a uniform velocity ‘v’ in a direction perpendicular to its length through a region in which a uniform magnetic field is acting vertically downward. Derive the expression for the emf induced across the ends of the rod.
(ii) How does one understand this motional emf by invoking the Lorentz force acting on the free charge carriers of the conductor? Explain. [CBSE (AI) 2014]

×××××××××××××××××××××××××vxl

Solution.

(i) Suppose a rod of length ‘l’ moves with velocity v inward in the region having uniform magnetic field B.

Initial magnetic flux enclosed in the rectangular space is φ = |B|lx

As the rod moves with velocity –v = dx/dt

Using Lenz’s law

ε = –dφ/dt = –d(Blx)/dt = –Bl(dx/dt) = Bl(–dx/dt)

∴ ε = Blv

(ii) Suppose any arbitrary charge ‘q’ in the conductor of length ‘l’ moving inward in the field as shown in figure, the charge q also moves with velocity v in the magnetic field B.

The Lorentz force on the charge ‘q’ is F = qvB and its direction is downwards.

So, work done in moving the charge ‘q’ along the conductor of length l

W = F·l = qvBl

Since emf is the work done per unit charge,

∴ ε = W/q = Blv

This equation gives emf induced across the rod.

Teacher's Note: Flux through the frame is Blx; as x shrinks at speed v, emf Blv matches work per charge qvBl/q.

Exam Note: Show both the flux and Lorentz-force routes.

Question 11. Figure shows planar loops of different shapes moving out of or into a region of magnetic field which is directed normal to the plane of loops downwards. Determine the direction of induced current in each loop using Lenz’s law. [CBSE (AI) 2010, (F) 2014]

××××××××(i)××××××××××××(ii)××××××××(iii)××××××××××××(iv)

Solution.

××××××××(i)××××××××××××(ii)××××××××(iii)××××××××××××(iv)

(a) In Fig. (i) the rectangular loop abcd and in Fig. (iii) circular loop are entering the magnetic field, so the flux linked with them increases; the direction of induced currents in these coils will be such as to oppose the increase of magnetic flux; hence the magnetic field due to current induced will be upward, i.e., currents induced will flow anticlockwise.

(b) In Fig. (ii), the triangular loop abc and in fig. (iv) the zig-zag shaped loop are emerging from the magnetic field, therefore magnetic flux linked with these loops decreases. The currents induced in them will tend to increase the magnetic field in downward direction, so the currents will flow clockwise.

Thus in fig. (i) current flows anticlockwise,
in fig. (ii) current flows clockwise,
in fig. (iii) current flows anticlockwise,
in fig. (iv) current flows clockwise.

Teacher's Note: Entering loops gain inward flux and resist with anticlockwise current; leaving loops lose flux and give clockwise current.

Exam Note: Classify each loop as entering or leaving.

Question 12. Use Lenz’s law to determine the direction of induced current in the situation described by following figs. [CBSE (F) 2014]
(i) A wire of irregular shape turning into a circular shape.
(ii) A circular loop being deformed into a narrow straight wire.

××××××××××××××××××××××××(i)(ii)

Solution.

××××××××××××××××××××××××adcb(i)(ii)

(i) For the given periphery the area of a circle is maximum. When a coil takes a circular shape, the magnetic flux linked with coil increases, so current induced in the coil will tend to decrease the flux and so will produce a magnetic field upward. As a result the current induced in the coil will flow anticlockwise i.e., along adcb.

(ii) For given periphery the area of circle is maximum. When circular coil takes the shape of narrow straight wire, the magnetic flux linked with the coil decreases, so current induced in the coil will tend to oppose the decrease in magnetic flux; hence it will produce upward magnetic field, so current induced in the coil will flow anticlockwise.

Teacher's Note: A circle encloses the largest area for a given perimeter, so reshaping toward or from a circle changes flux.

Exam Note: Compare enclosed area before and after; then Lenz.

Question 13. Show that Lenz’s law is in accordance with the law of conservation of energy. [CBSE (F) 2017]

Solution.

Lenz’s law: According to this law “the direction of induced current in a closed circuit is always such as to oppose the cause that produces it.”

Example: When the north pole of a magnet is brought near a closed coil, the direction of current induced in the coil is such as to oppose the approach of North Pole. For this the nearer face of coil behaves as North Pole. This necessitates an anticlockwise current in the coil, when seen from the magnet side [fig. (a)].

Similarly when North Pole of the magnet is moved away from the coil, the direction of current in the coil will be such as to attract the magnet. For this the nearer face of coil behaves as South Pole. This necessitates a clockwise current in the coil, when seen from the magnet side [fig. (b)].

SNN(a) N-pole approaches: near face NSNS(b) N-pole recedes: near face S

Conservation of Energy in Lenz’s Law: Thus, in each case whenever there is a relative motion between a coil and the magnet, a force begins to act which opposes the relative motion. Therefore to maintain the relative motion, a mechanical work must be done. This work appears in the form of electric energy of coil. Thus Lenz’s law is based on principle of conservation of energy.

Teacher's Note: The induced force always resists the motion, so mechanical work done converts into electrical energy of the coil.

Exam Note: Give magnet–coil example; link resisting force to energy.

Question 14. A bar magnet M is dropped so that it falls vertically through the coil C. The graph obtained for voltage produced across the coil versus time is showing in figure (b).

NSMVtV(b)(a)
(i) Explain the shape of the graph.
(ii) Why is the negative peak longer than the positive peak?

Solution.

(i) When the bar magnet falls through the coil, the magnetic flux linked with the coil changes, so an emf (or pd) is developed across the coil.

Initially, the rate of increase of flux increases, becomes maximum and then it decreases, becomes zero. Now, magnetic flux begins to decrease, the rate of decrease increases becomes maximum and then it decreases and when the magnet is sufficiently far on the other side, the flux becomes zero and so pd induced becomes zero.

(ii) Negative peak is longer than Positive peak because magnet moves out of coil faster than it moves into the coil, so the rate of decrease of magnetic flux is faster than the rate of increase of flux.

Teacher's Note: Flux first rises then falls as the magnet passes, giving opposite-signed pulses; the faster exit gives the taller one.

Exam Note: Link peak height to speed of the magnet.

Question 15. Predict the direction of induced current in the situations described in the following figs.

pqrSN(a)pqxyrzSN(b)

Solution.

pqrSN(a)SpqxyrzSN(b)SS

(a) The direction of current is along qrpq because the current induced in solenoid will oppose the approach of magnet, so from looking on magnet side, the current at nearer face should flow clockwise.

(b) In this case the current induced in coil pq will oppose the approach of magnet while coil xy will oppose the recession of magnet; so nearer faces of coils will act as S-poles. Accordingly the direction of current in coil pq will be along qrp and in coil xy it will be along yzx.

Teacher's Note: Both near faces turn S, which means clockwise as seen from the magnet in each case.

Exam Note: Fix near-face pole, then current sense.

Question 16. Predict the direction of induced current in the situations described in the following figs.

key + cellyzx(a) Tapping key just closedyzx(b) Rheostat setting being changedkey + cellxyr(c) Tapping key just releasedI(d) I decreasing at a steady rate

Solution.

key + cellyzxclockwise(a) Tapping key just closedyzx(b) Rheostat setting being changedanticlockwisekey + cellxyr(c) Tapping key just releasedI(d) I decreasing at a steady rate

(a) When the tapping key is just closed, the current produced in the left loop flows clockwise, so magnetic field induced will flow along negative axis; the current induced in right coil will oppose the magnetic field produced, so current in right coil will flow anticlockwise, i.e., direction of current will be along yzx.

(b) The current in coil is anticlockwise. When rheostat setting is being changed, the resistance of the right circuit is decreasing, so current is increasing, the current induced in left loop will oppose the increase of current, so current induced in left coil will flow clockwise i.e., along zyx.

(c) Induced current in the right coil is along xry.

(d) No induced current because magnetic field lines lie in the plane of loop.

Teacher's Note: Rising current induces an opposing current, falling current a supporting one; field in the loop plane gives no flux.

Exam Note: Decide whether the primary current grows or falls.

Question 17. Figure shows two long coaxial solenoids, each of length ‘L’. The outer solenoid has an area of cross-section A1 and number of turns/length n1. The corresponding values for the inner solenoid are A2 and n2. Write the expression for self-inductance L1, L2 of the two coils and their mutual inductance M. Hence show that M < √(L1L2).

Ln1 turns/m, A1 (outer)n2 turns/m, A2 (inner)

Solution.

Self-inductance of a solenoid of length L = μ0n2AL, where n is number of turns per metre.

L1 = μ0n12A1L and L2 = μ0n22A2L

If I1 is the current in outer solenoid, then magnetic field at axis, B1 = μ0n1I1

Magnetic flux linked with the secondary coil (the inner solenoid, area A2):

φ2 = (n2L)B1A2 = (n2L)(μ0n1I1)A2 = μ0n1n2LA2I1

M = φ2/I1 = μ0n1n2LA2   …(i)

Now, L1L2 = (μ0n12A1L)(μ0n22A2L)

√(L1L2) = μ0n1n2L√(A1A2)   …(ii)

M/√(L1L2) = √(A2/A1)

As A2 < A1, A2 < √(A1A2)

∴ M < √(L1L2)

Teacher's Note: Outer field links only the inner area A2, so M falls short of the geometric mean of L1 and L2.

Exam Note: Take the ratio M over root of L1L2.

Download Xam Idea Solutions for Class 12 Math PDF

Download Xam Idea Solutions for Class 12

Explore reliable mathematical solutions for Xam Idea Solutions Class 12 Physics Chapter 6 Electromagnetic Induction Short Answer Questions II tailored for Class 12 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.

Mastering Core Concepts with Xam Idea Solutions

Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.

Explore More Study Resources for Class 12 Math

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these [current-page:node:field_author] Solutions for Class 12 Physics?

They are chapter-wise solved questions from the book for Class 12 Physics. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 12 Physics Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 12 Physics?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 12 Physics questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 12 Physics Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.