Download Class 12 Physics Textbook Solutions: Chapter 06 Electromagnetic Induction
Access comprehensive textbook solutions for Chapter 06 Electromagnetic Induction using the reference material for Class 12 Physics. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.
Access Textbook Answers and Solutions
Navigate directly to the solved Physics textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.
Very Short Answer Questions
Question 1. Two spherical bobs, one metallic and the other of glass, of the same size are allowed to fall freely from the same height above the ground. Which of the two would reach earlier and why? [CBSE Delhi 2014]
Solution.
Glass would reach earlier. This is because there is no effect of electromagnetic induction in glass, due to presence of Earth’s magnetic field, unlike in the case of metallic ball.
Teacher's Note: Eddy currents oppose the metal bob's motion, while glass has none.
Exam Note: Say glass first; cite induced currents.
Question 2. When current in a coil changes with time, how is the back emf induced in the coil related to it? [CBSE (AI) 2008]
Solution.
The back emf induced in the coil opposes the change in current.
Teacher's Note: Self-induced back emf opposes the change in current.
Exam Note: Write e = -L dI/dt.
Question 3. State the law that gives the polarity of the induced emf. [CBSE (AI) 2009]
Solution.
Lenz’s Law: The polarity of induced emf is such that it tends to produce a current which opposes the change in magnetic flux that produces it.
Teacher's Note: Lenz's law gives the direction of induced emf from energy conservation.
Exam Note: Quote: opposes the change in flux.
Question 4. A long straight current carrying wire passes normally through the centre of circular loop. If the current through the wire increases, will there be an induced emf in the loop? Justify. [CBSE Delhi 2017]
Solution.
No.
Justification: As the magnetic field due to current carrying wire will be in the plane of the circular loop, so magnetic flux will remain zero. Also, magnetic flux does not change with the change in current.
Teacher's Note: The wire's field is tangential to the loop, so no flux links it and none changes.
Exam Note: Answer no; justify with zero flux.
Question 5. A light metal disc on the top of an electromagnet is thrown up as the current is switched on. Why? Give reason. [CBSE (AI) 2013]
Solution.
A metal disc is placed on the top of a magnet, as the electric current flows through the coil, an induced current in the form of Eddies flows through the metal plate, the lower face attains the same polarity, and hence the metal disc is thrown up.
Teacher's Note: Rising current induces eddy currents in the disc that repel it upward by Lenz's law.
Exam Note: Cite Lenz's law and eddy currents.
Question 6. Give one example of use of eddy currents. [CBSE (F) 2016]
Solution.
(i) Electromagnetic damping in certain galvanometers.
(ii) Magnetic braking in trains.
(iii) Induction furnace to produce high temperature. (Any one)
Teacher's Note: Eddy currents serve in braking, damping and induction heating.
Exam Note: Name any one use.
Question 7. A planar loop of rectangular shape is moved within the region of a uniform magnetic field acting perpendicular to its plane. What is the direction and magnitude of the current induced in it? [CBSE Ajmer 2015]
Solution.
If planar loop moves within the region of uniform magnetic field, no current will be induced in the loop. Hence no direction.
Teacher's Note: Flux through the loop stays constant in a uniform field, so no emf arises.
Exam Note: State no current; flux constant.
Question 8. The motion of copper plate is damped when it is allowed to oscillate between the two poles of a magnet. What is the cause of this damping? [CBSE (AI) 2013]
Solution.
As the plate oscillate, the changing magnetic flux through the plate produces a strong eddy current in the direction, which opposes the cause.
Also, copper being diamagnetic substance, it gets magnetised in the opposite direction, so the plate motion gets damped.
Teacher's Note: Eddy currents induced in the swinging plate oppose its motion, producing damping.
Exam Note: Cite Lenz's law and eddy currents.
Question 9. Write SI unit of magnetic flux. Is it a scalar or a vector quantity?
Solution.
SI unit of magnetic flux is weber. It is a scalar quantity.
Teacher's Note: Magnetic flux is field times area, measured in weber, without direction.
Exam Note: Give weber; scalar.
Question 10. Why does a metallic piece become very hot when it is surrounded by a coil carrying high frequency alternating current?
Solution.
Due to flow of high frequency alternating current in the coil, the magnetic flux linked with the metallic piece changes by a large amount, so heavy eddy currents are induced in the metallic piece. These currents cause metallic piece to get heated.
Teacher's Note: Rapidly varying flux induces large eddy currents that heat the metal.
Exam Note: Mention eddy currents and Joule heating.
Question 11. A bar magnet falls from a height ‘h’ through a metal ring. Will its acceleration be equal to g? Give reason for your answer.
Solution.
When magnet falls, the magnetic flux linked through the metal ring changes, so current is induced in the ring which (according to Lenz’s law) opposes the approach of magnet, so its acceleration will be less than g.
Teacher's Note: Induced current in the ring opposes the magnet's fall, so acceleration is below g.
Exam Note: State less than g; cite Lenz's law.
Question 12. Define 1 henry.
Solution.
1 henry is self-inductance of that coil in which 1 volt emf is produced when the rate of change of current in that coil is 1 A/s.
Teacher's Note: The henry is defined from induced emf per rate of change of current.
Exam Note: Use e = L dI/dt.
Question 13. How does the self-inductance of an air coil change, when (i) The number of turns in the coil is decreased? (ii) An iron rod is introduced in the coil?
Solution.
(i) Self-inductance of a coil ∝ N2.
When number of turns in coil is decreased, the self-inductance will decrease.
(ii) When an iron rod is introduced in the coil, the self-inductance of coil increases.
Teacher's Note: Inductance depends on turns squared and core material.
Exam Note: Use L proportional to N squared.
Question 14. A wire in the form of a tightly wound solenoid is connected to a DC source, and carries a current. If the coil is stretched so that there are gaps between successive elements of the spiral coil, will the current increase or decrease? Explain. [NCERT Exemplar]
Solution.
The current will increase. As the wires are pulled apart the flux will leak through the gaps. Lenz’s law demands that induced emf resist this decrease, which can be done by an increase in current.
Teacher's Note: Stretching loses flux linkage and reduces back emf, so the current rises.
Exam Note: State increases, with reason.
Question 15. A solenoid is connected to a battery so that a steady current flows through it. If an iron core is inserted into the solenoid, will the current increase or decrease? Explain. [NCERT Exemplar]
Solution.
The current will decrease. As the iron core is inserted in the solenoid, the magnetic field increases and the flux increases. Lenz’s law implies that induced emf should resist this increase, which can be achieved by a decrease in current. However, this change will be momentarily.
Teacher's Note: Inserting iron increases flux and inductance, so the opposing emf makes current dip temporarily.
Exam Note: State decreases momentarily; cite Lenz's law.
Question 16. If an LC circuit is considered analogous to a harmonically oscillating spring block system, which energy of the LC circuit would be analogous to potential energy and which one analogous to kinetic energy? [NCERT Exemplar]
Solution.
Magnetic energy analogous to kinetic energy and electrical energy analogous to potential energy.
Teacher's Note: In an LC circuit electric energy matches potential energy, and magnetic energy matches kinetic energy.
Exam Note: Match each energy correctly.
Question 17. Consider a metal ring kept (supported by a cardboard) on top of a fixed solenoid carrying a current I (in figure). The centre of the ring coincides with the axis of the solenoid. If the current in the solenoid is switched off, what will happen to the ring? [NCERT Exemplar]
Solution.
When the current in the solenoid decreases a current flows in the same direction in the metal ring as in the solenoid. Thus there will be a downward force. This means the ring will remain on the cardboard. The upward reaction of the cardboard on the ring will increase.
Teacher's Note: The induced ring current opposes the falling solenoid current, pulling the ring downward.
Exam Note: Cite Lenz's law.
Question 18. Consider a metallic pipe with an inner radius of 1 cm. If a cylindrical bar magnet of radius 0.8 cm is dropped through the pipe, it takes more time to come down than it takes for a similar unmagnetised cylindrical iron bar dropped through the metallic pipe. Explain. [NCERT Exemplar]
Solution.
For the magnet, eddy currents are produced in the metallic pipe. These currents will oppose the motion of the magnet. Therefore magnet’s downward acceleration will be less than the acceleration due to gravity g. On the other hand, an unmagnetised iron bar will not produce eddy currents and will fall an acceleration g. Thus the magnet will take more time.
Teacher's Note: Eddy currents in the pipe oppose the magnet's fall, so it is slower.
Exam Note: Say acceleration less than g.
Question 19. On what factors does the magnitude of the emf induced in the circuit due to magnetic flux depend? [CBSE (F) 2013]
Solution.
It depends on the rate of change in magnetic flux (or simply change in magnetic flux).
|ε| = |Δφ/Δt|
Teacher's Note: Induced emf depends on how fast the flux changes, not on the flux value itself.
Exam Note: Write |e| = change in flux per unit time.
Question 20. A bar magnet is moved in the direction indicated by the arrow between two coils PQ and CD. Predict the directions of induced current in each coil. [CBSE (AI) 2012, 2017]
Solution.
In figure, N-pole is receding away coil (PQ), so in coil (PQ), the nearer faces will act as S-pole and in coil (CD) the nearer face will also act as S-pole to oppose the approach of magnet towards coil (CD), so currents in coils will flow clockwise as seen from the side of magnet. The direction of current will be from P to Q in coil (PQ) and from C to D in coil (CD).
Teacher's Note: PQ's near face turns S to attract the receding N-pole; CD's turns S to repel the approaching S-pole.
Exam Note: Name the induced pole on each coil.
Question 21. The closed loop PQRS is moving into a uniform magnetic field acting at right angles to the plane of the paper as shown. State the direction of the induced current in the loop. [CBSE (AI) 2012]
Solution.
Due to the motion of coil, the magnetic flux linked with the coil increases. So by Lenz’s law, the current induced in the coil will oppose this increase, hence tend to produce a field upward, so current induced in the coil will flow anticlockwise.
i.e., along PSRQP
Teacher's Note: Entering a field raises inward flux, so the induced field points out of the page: anticlockwise.
Exam Note: State anticlockwise, along PSRQP; cite Lenz.
Question 22. A rectangular loop of wire is pulled to the right, away from the long straight wire through which a steady current I flows upwards. What is the direction of induced current in the loop? [CBSE (F) 2010]
Solution.
Ans. Direction of induced current in loop is clockwise.
Reason: Induced current opposes the motion of loop away from wire; as similar currents attract, so in nearer side of loop the current will be upward, i.e., in loop, current is clockwise.
Teacher's Note: Moving away reduces the inward flux, so the induced current adds inward field: clockwise.
Exam Note: Answer clockwise; justify with Lenz or attraction.
Question 23. Predict the directions of induced currents in metal rings 1 and 2 lying in the same plane where current I in the wire is increasing steadily. [CBSE Delhi 2012, (AI) 2017] [HOTS]
Solution.
Ans. Ring 1: clockwise. Ring 2: anticlockwise.
The field of the wire points out of the page above it (ring 1) and into the page below it (ring 2). As the current increases, each ring opposes the growth of its flux, so ring 1 carries a clockwise current and ring 2 an anticlockwise current.
Teacher's Note: The wire's field is opposite on its two sides, so the two rings carry opposite currents.
Exam Note: Give both senses: ring 1 clockwise, ring 2 anticlockwise.
Question 24. The electric current flowing in a wire in the direction from B to A is decreasing. Find out the direction of the induced current in the metallic loop kept above the wire as shown. [CBSE (AI) 2014]
Solution.
The current in the wire produces a magnetic field vertically downward in the vicinity of the coil. When the current in wire BA decreases, according to Lenz’s law, the current induced in the coil opposes this decrease; so the current in the coil will be in clockwise direction.
Teacher's Note: Current from B to A gives inward field at the loop; falling flux is opposed by a clockwise current.
Exam Note: Find field direction first, then apply Lenz.
Question 25. A plot of magnetic flux (φ) versus current (I) is shown in the figure for two inductors A and B. Which of the two has larger value of self-inductance? [CBSE Delhi 2010]
Solution.
φ = LI
For same current, φA > φB, so LA > LB
i.e., Inductor A has larger value of self-inductance.
Teacher's Note: The slope of the flux–current line equals L, and line A is steeper.
Exam Note: Compare slopes of the lines.
Question 26. Two loops of different shapes are moved in the region of a uniform magnetic field pointing downward. The loops are moved in the directions shown by arrows. What is the direction of induced current in each loop? [CBSE (F) 2010] [HOTS]
Solution.
Loop abc is entering the magnetic field, so magnetic flux linked with it begins to increase. According to Lenz’s law, the current induced opposes the increases in magnetic flux, so current induced will be anticlockwise which tends to decrease the magnetic field.
Loop defg is leaving the magnetic field; so flux linked with it tends to decrease, the induced current will be clockwise to produce magnetic field downward to oppose the decrease in magnetic flux.
Teacher's Note: Entering loop gains inward flux and resists it anticlockwise; the leaving loop loses flux and resists clockwise.
Exam Note: State entering versus leaving for each loop.
Question 27. A triangular loop of wire placed at abc is moved completely inside a magnetic field which is directed normal to the place of the loop away from the reader to a new position a′ b′ c′. What is the direction of the current induced in the loop? Give reason. [CBSE (F) 2014] [HOTS]
Solution.
As there is no change in magnetic flux, so no current is induced in the loop.
Teacher's Note: The loop stays wholly inside a uniform field, so its flux is constant and no current flows.
Exam Note: Say no current; flux unchanged.
Question 28. A rectangular loop and a circular loop are moving out of a uniform magnetic field region to a field free region with a constant velocity. In which loop do you expect the induced emf to be a constant during the passage out of the field region? The field is normal to the loop. [CBSE (AI) 2010]
Solution.
In rectangular coil the induced emf will remain constant because in this the case rate of change of area in the magnetic field region remains constant, while in circular coil the rate of change of area in the magnetic field region is not constant.
Teacher's Note: A rectangle leaves the field at a steady area rate; a circle's area changes at a varying rate.
Exam Note: Choose the rectangular loop; compare dA/dt.
Question 29. Predict the polarity of the capacitor C connected to coil, which is situated between two bar magnets moving as shown in figure. [CBSE Delhi 2011, (AI) 2017]
Solution.
Current induced in coil will oppose the approach of magnet; therefore, left face of coil will act as N-pole and right face as S-pole. For this the current in coil will be anticlockwise as seen from left, therefore, the plate A of capacitor will be positive and plate B will be negative.
Teacher's Note: Both magnets approach, so the coil faces repel them; the resulting current charges plate A positive.
Exam Note: Find face polarity, then current sense, then plate sign.
Question 30. A rectangular wire frame, shown below, is placed in a uniform magnetic field directed upward and normal to the plane of the paper. The part AB is connected to a spring. The spring is stretched and released when the wire AB has come to the position A′B′ (t = 0). How would the induced emf vary with time? Neglect damping. [HOTS]
Solution.
When the spring is stretched and released, the wire AB will execute simple harmonic (sinusoidal) motion, so induced emf will vary periodically. At t = 0, wire is at the extreme position
v = 0.
v = Aω sin ωt
Induced emf ε = Bvl
= BAωl sin ωt
Where A = BB′ = AA′ is the amplitude of motion and ω is angular frequency.
Teacher's Note: Released from rest at an extreme, the rod oscillates simple harmonically, so emf is sinusoidal and starts from zero.
Exam Note: Write e = BAωl sin ωt.
Question 31. Show diagrammatically when is magnetic flux taken as (i) Positive (ii) Negative
Solution.
Magnetic flux φ = B·A = BA cos θ, where A points along the normal n̂ to the area.
(i) If the normal N to area A is in the same direction as B (θ = 0°), φ = BA cos 0° = +BA, which is positive.
(ii) If the normal N is in the opposite direction to B (θ = 180°), φ = BA cos 180° = –BA, which is negative.
Teacher's Note: Flux sign depends on the angle between the area normal and B: 0° positive, 180° negative.
Exam Note: Draw normal parallel and antiparallel to B.
Question 32. Give the direction in which the induced current flows in the coil mounted on an insulating stand when a bar magnet is quickly moved along the axis of the coil from one side to the other as shown in the figure alongside.
Solution.
Current induced in the coil flows clockwise for an observer sitting on the magnet.
Teacher's Note: Coil opposes approach of the S-pole and later its recession, both clockwise as seen from the magnet.
Exam Note: State sense relative to the moving magnet.
Question 33. Give the direction in which induced current flows in the wire loop, when the magnet moves towards the loop as shown.
Solution.
The current induced in the coil will oppose the approach of magnet, so this nearer face of the coil will act as North Pole; therefore on viewing from the magnet side the current in the coil will be anticlockwise.
Teacher's Note: Approaching N-pole is repelled by an induced N face, which is anticlockwise when viewed from the magnet.
Exam Note: Give the sense viewed from the magnet side.
Question 34. If the rate of change of current 2 ampere/second induces an emf of 40 mV in the solenoid, what is the self-inductance of this solenoid?
Solution.
Induced emf e = –L dI/dt
∴ L = e/(dI/dt) (numerically) = (40 × 10–3)/2 = 20 × 10–3 H = 20 mH
Teacher's Note: Self-inductance is the ratio of induced emf to rate of change of current: 40 mV over 2 A/s.
Exam Note: Convert 40 mV to 0.04 V first.
Question 35. The given graph shows a plot of magnetic flux (φ) and the electric current (I) flowing through two inductors P and Q. Which of the two inductors has smaller value of self-inductance?
Solution.
Inductor P, φ = LI ⇒ L = φ/I
For P, φ/I is lesser so, it has smaller value of Self inductance.
Teacher's Note: Self-inductance equals the slope of the flux–current line; P has the gentler slope.
Exam Note: Compare slopes: smaller slope means smaller L.
Question 36. Consider a magnet surrounded by a wire with an on/off switch S (as shown in figure). If the switch is thrown from the off position (open circuit) to the on position (closed circuit), will a current flow in the circuit? Explain. [NCERT Exemplar]
Solution.
No part of the wire is moving and so motional emf is zero. The magnet is stationary and hence the magnetic field does not change with time. This means no electromotive force is produced and hence no current will flow in the circuit.
Teacher's Note: Closing a switch alone changes nothing: with a static magnet and fixed wire, flux stays constant.
Exam Note: Check for motion or changing field first.
Free study material for Physics
Download Xam Idea Solutions for Class 12 Math PDF
Chapter-wise Xam Idea Solutions: Xam Idea Solutions Class 12 Physics Chapter 6 Electromagnetic Induction Very Short Answer Questions
Explore reliable mathematical solutions for Xam Idea Solutions Class 12 Physics Chapter 6 Electromagnetic Induction Very Short Answer Questions tailored for Class 12 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.
Step-by-Step Mathematical Explanations
Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.
Additional Study Materials for 2026
In addition to these Xam Idea Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.
FAQs
They are chapter-wise solved questions from the book for Class 12 Physics. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.