Official Textbook Solutions: Class 12 Physics Chapter 04 Moving Charges And Magnetism
Access comprehensive textbook solutions for Chapter 04 Moving Charges And Magnetism using the reference material for Class 12 Physics. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.
Chapter-wise Solutions for Physics: Chapter 04 Moving Charges And Magnetism
Navigate directly to the solved Physics textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.
Short Answer Questions I
Question 1. State the underlying principle of a cyclotron. Write briefly how this machine is used to accelerate charged particles to high energies. [CBSE Delhi 2014]
Solution.
A cyclotron makes use of the principle that the energy of the charged particles can be increased to a high value by making it pass through an electric field repeatedly.
The magnetic field acts on the charged particle and makes them move in a circular path inside the dee. Every time the particle moves from one dee to another it is acted upon by the alternating electric field, and is accelerated by this field, which increases the energy of the particle.
Uses: (i) It is used to bombard nuclei with high energetic particles accelerated by cyclotron and study the resulting nuclear reaction.
(ii) It is used to implant ions into solids and modify their properties or even synthesize new materials.
Teacher's Note: A cyclotron accelerates particles repeatedly across a gap while a magnetic field bends them in circles.
Exam Note: Mention synchronised electric field; label diagram.
Question 2. State two reasons why a galvanometer cannot be used as such to measure current in a given circuit. [CBSE Delhi 2010] OR Can a galvanometer as such be used for measuring the current? Explain.
Solution.
A galvanometer cannot be used as such to measure current due to following two reasons.
(i) A galvanometer has a finite large resistance and is connected in series in the circuit, so it will increase the resistance of circuit and hence change the value of current in the circuit.
(ii) A galvanometer is a very sensitive device, it gives a full scale deflection for the current of the order of microampere, hence if connected as such it will not measure current of the order of ampere.
Teacher's Note: A galvanometer has large resistance and tiny current range, so it distorts or overloads the circuit.
Exam Note: Give both reasons.
Question 3. You are given a low resistance R1 a high resistance R2 and a moving coil galvanometer. Suggest how would you use these to have an instrument that will be able to measure (i) Current (ii) Potential difference.
Solution.
(i) To measure current we shall connect low resistance R1 in parallel with the coil of moving coil galvanometer. This arrangement is called ammeter.
(ii) To measure the potential difference we shall connect high resistance R2 in series with the coil of galvanometer. This arrangement is called voltmeter.
Teacher's Note: A shunt in parallel makes an ammeter, and a large series resistance makes a voltmeter.
Exam Note: Low R1 parallel, high R2 series.
Question 4. Find the condition under which the charged particles moving with different speeds in the presence of electric and magnetic field vector can be used to select charged particles of a particular speed. [CBSE (AI) 2017]
Solution.
Consider a charge q moving with velocity v in the presence of electric and magnetic fields. The force on an electric charge q due to both of them is F = q[E(r) + v × B(r)] ⇒ F = Felectric + Fmagnetic … (i)
Where, v = velocity of the charge, r = location of the charge at a given time t, E(r) = electric field, B(r) = magnetic field.
Let us consider a simple case in which electric and magnetic fields are perpendicular to each other and also perpendicular to the velocity of the particle.
FE = qE = qE ĵ
FB = qv × B = q(vî × Bk̂) = –qvB ĵ
∴ F = q(E – vB) ĵ
Thus, electric and magnetic forces are in opposite directions.
Suppose we adjust the values of E and B such that magnitudes of the two forces are equal, then the total force on the charge is zero and the charge will move in the fields undeflected. This happens when qE = qvB or v = E/B
This condition can be used to select charged particles of a particular velocity out of a beam containing charges moving with different speeds (irrespective of their charge and mass). The crossed E and B fields therefore serve as a velocity selector.
Teacher's Note: Perpendicular E, B and v: forces oppose, and cancel only when v = E/B for any charge or mass.
Exam Note: Condition qE = qvB, so v = E/B.
Question 5. Answer the following questions (i) Write the expression for the magnetic force acting on a charged particle moving with velocity v in the presence of magnetic field B. (ii) A neutron, an electron and an alpha particle moving with equal velocities, enter a uniform magnetic field going into the plane of the paper as shown. Trace their paths in the field and justify your answer. [CBSE Delhi 2016]
Solution.
(i) F = q(v × B)
(ii) The neutron has no charge, so it feels no force and goes straight. The forces on the alpha particle (positive) and the electron (negative) are opposite to each other, so they bend in opposite senses. Radius r = mv/(qB). For equal velocity, r ∝ m/q. The alpha particle has about 7300 times the mass of the electron but only twice its charge, so the radius of the alpha particle is much greater than that of the electron.
Teacher's Note: Neutron is undeflected; the radius mv/qB is far larger for the heavy alpha particle than for the electron.
Exam Note: Neutron straight; α and e opposite bends; rα ≫ re.
Question 6. Write the expression for Lorentz magnetic force on a particle of charge ‘q’ moving with velocity v in a magnetic field B. Show that no work is done by this force on the charged particle. [CBSE (AI) 2011]
Solution.
Lorentz magnetic force, Fm = q v × B
Work done, W = ∫Fm·dS = ∫Fm·v dt = ∫q(v × B)·v dt
As (v × B)·v = 0 (v × B is perpendicular to v)
∴ Work, W = 0
Teacher's Note: Magnetic force is perpendicular to velocity, so power F·v is zero and kinetic energy never changes.
Exam Note: F·v = 0 so W = 0.
Question 7. A charged particle enters perpendicularly a region having either (i) magnetic field or (ii) an electric field. How can the trajectory followed by the charged particle help us to know whether the region has an electric field or a magnetic field? Explain briefly.
Solution.
The path of the charged particle will be circular in a magnetic field. This is due to the reason that the force acting on the particle will be at right angles to the field as well as direction of motion, resulting in a circular trajectory.
In the case of electric field, the trajectory of the particle will be determined by the equation s = ut + ½(qE/m)t² (s = ut + ½at²), where q and m are charge and mass of the particle, E is the electric field and s is the distance travelled by the particle in time t. Thus, the trajectory will be a parabolic path.
Teacher's Note: Magnetic force stays perpendicular to velocity giving a circle; a uniform electric force gives constant acceleration and a parabola.
Exam Note: Circle means magnetic field; parabola means electric field.
Question 8. A long straight wire AB carries a current I. A proton P travels with a speed v, parallel to the wire, at a distance d from it in a direction opposite to the current as shown in the figure. What is the force experienced by the proton and what is its direction? [CBSE (AI) 2010]
Solution.
Magnetic field due to current carrying wire is perpendicular to plane of paper – downward (into the page).
i.e., B = –(μ0I/2πd) k̂
Force F = qv × B = e(–vĵ) × (–(μ0I/2πd) k̂) = (μ0evI/2πd) î
That is the magnetic force has magnitude μ0evI/(2πd) and is directed along positive X-axis i.e., in the plane of paper perpendicular to direction of v and to the right (away from the wire).
Teacher's Note: Proton moving against the current is like an opposite current, so the wire repels it.
Exam Note: Force μ0evI/2πd, away from the wire.
Question 9. Two long and parallel straight wires carrying currents of 2 A and 5 A in the opposite directions are separated by a distance of 1 cm. Find the nature and magnitude of the magnetic force between them. [CBSE (F) 2011]
Solution.
I1 = 2 A, I2 = 5 A, a = 1 cm = 1 × 10⁻² m
Force between two parallel wires per unit length is given by F = (μ0/2π)·I1I2/a = 2 × 10⁻⁷ × (2 × 5)/(1 × 10⁻²) = 20 × 10⁻⁵ N (per metre length) (Repulsive)
Teacher's Note: Opposite currents repel; force per metre is μ0I1I2/2πa.
Exam Note: Repulsive, 2 × 10⁻⁴ N per metre.
Question 10. A short bar magnet of magnetic moment 0.9 J/T is placed with its axis at 30° to a uniform magnetic field. It experiences a torque of 0.063 J. (i) Calculate the magnitude of the magnetic field. (ii) In which orientation will the bar magnet be in stable equilibrium in the magnetic field? [CBSE (F) 2012]
Solution.
(i) We know τ = M × B, or τ = MB sin θ
0.063 = 0.9 × B × sin 30° ⇒ B = 0.063/(0.9 × 0.5) = 0.14 T
(ii) The position of minimum energy corresponds to position of stable equilibrium. The energy (U) = –MB cos θ. When θ = 0°, U = –MB = minimum energy. Hence, when the bar magnet is placed parallel to the magnetic field, it is the state of stable equilibrium.
Teacher's Note: Torque MB sin θ gives B; stable equilibrium has minimum energy –MB cos θ, at θ = 0°.
Exam Note: B = 0.14 T; stable when M is parallel to B.
Question 11. A magnetised needle of magnetic moment 4.8 × 10⁻² J T⁻¹ is placed at 30° with the direction of uniform magnetic field of magnitude 3 × 10⁻² T. Calculate the torque acting on the needle. [CBSE (F) 2012]
Solution.
We have, τ = MB sin θ, where τ = torque acting on magnetic needle, M = magnetic moment, B = magnetic field strength.
Then τ = 4.8 × 10⁻² × 3 × 10⁻² × sin 30° = 4.8 × 10⁻² × 3 × 10⁻² × ½
τ = 7.2 × 10⁻⁴ N m
Teacher's Note: Direct substitution in τ = MB sin θ with sin 30° = ½.
Exam Note: Torque 7.2 × 10⁻⁴ N m.
Question 12. An electron beam passes through a region of crossed electric and magnetic fields of strength E and B respectively. For what value of electron-speed the beam will remain undeflected?
Solution.
The electron beam will pass undeflected if electric force and magnetic force on electron is equal and opposite i.e., eE = evB
or v = E/B
Teacher's Note: Electric and magnetic forces on the electron balance, so speed equals E/B whatever the charge sign.
Exam Note: Speed v = E/B.
Question 13. An α–particle and a proton are moving in the plane of paper in a region where there is a uniform magnetic field directed normal to the plane of the paper. If the particles have equal linear momenta, what would be the ratio of the radii of their trajectories in the field?
Solution.
Radius of circular path of a charged particle, r = mv/(qB) = p/(qB).
For same linear momentum and magnetic field B, r ∝ 1/q
∴ rα/rp = qp/qα = (+e)/(+2e) = 1/2
Teacher's Note: At equal momentum the radius depends only on charge; the alpha particle has twice the proton’s charge.
Exam Note: r = p/qB; ratio rα : rp = 1 : 2.
Question 14. A particle of mass ‘m’, with charge ‘q’ moving with a uniform speed ‘v’, normal to a uniform magnetic field ‘B’, describes a circular path of radius ‘r’. Derive expressions for the (i) time period of revolution and (ii) kinetic energy of the particle.
Solution.
(i) Motion of charged particle in perpendicular magnetic field: The magnetic force on charged particle qvB sin 90° provides the necessary centripetal force for a circular path, so
qvB = mv²/r ⇒ v = qBr/m
But v = 2πr/T, where T is time period. ∴ 2πr/T = qBr/m ⇒ T = 2πm/(qB)
(ii) Kinetic energy of charged particle: KE = ½mv² = ½m(q²B²r²/m²) = q²B²r²/(2m)
Teacher's Note: Magnetic force supplies centripetal force, giving v = qBr/m; T = 2πr/v is independent of speed.
Exam Note: T = 2πm/qB; KE = q²B²r²/2m.
Question 15. If a particle of charge q is moving with velocity v along X-axis and the magnetic field B is acting along Y-axis, use the expression F = q(v × B) to find the direction of force F acting on it.
Solution.
F = q v × B
Given v = v î, B = B ĵ
∴ F = q(vî × Bĵ) = qvB k̂
That is, force is acting along Z-axis (for a positive charge).
Teacher's Note: î × ĵ = k̂, so a positive charge feels force along +Z, perpendicular to both v and B.
Exam Note: Cross product gives force along +Z axis.
Question 16. The velocities of two α-particles A and B entering a uniform magnetic field are in the ratio 4 : 1. On entering the field they move in different circular paths. Give the ratio of the radii of curvature of the paths of the particles.
Solution.
Radius of circular path r = mv/(qB) i.e. r ∝ v (m, q and B are the same for both α-particles)
∴ rA/rB = vA/vB = 4/1
Teacher's Note: Identical particles in one field: radius is directly proportional to speed.
Exam Note: rA : rB = 4 : 1.
Question 17. An ammeter and a milliammeter are converted from the same galvanometer. Out of the two, which current measuring instrument has a higher resistance?
Solution.
Shunt resistance, S = [Ig/(I – Ig)]G ≈ (Ig/I)G
Clearly, smaller the value of range, larger is the shunt resistance. Obviously, milliammeter will have a larger shunt resistance and hence it will have a higher resistance.
1/RA = 1/G + 1/S. Higher the S, higher the RA for given G.
Teacher's Note: Smaller range needs a larger shunt, and the parallel combination of G and S is then larger.
Exam Note: Milliammeter has the higher resistance.
Question 18. A charged particle enters into a uniform magnetic field and experiences an upward force as indicated in the figure. What is the charge sign on the particle? [HOTS]
Solution.
Positive charge: By Fleming left hand rule the direction of current (velocity) is along positive Z-axis (B along +X, force along +Y). By vector method Fm = q v × B
Fm ĵ = q v k̂ × B î = qvB ĵ
This shows that q is positive.
Teacher's Note: k̂ × î = ĵ, so the observed upward force needs positive q for this velocity and field.
Exam Note: Force along +y fixes q positive.
Question 19. A given galvanometer is to be converted into (i) an ammeter (ii) a milliammeter (iii) a voltmeter. In which case will the required resistance be (i) least (ii) highest and why? [HOTS]
Solution.
The required resistance has least value in the case of an ammeter and maximum value in the case of a voltmeter.
This is due to the reason that the shunt resistance required to convert a galvanometer into ammeter or milliammeter has the value S = [Ig/(I – Ig)] × Rg
Thus, the shunt required in the case of milliammeter has higher value (smaller range, larger S).
Similarly, since the voltmeter should have a high resistance, the value of required resistance should be highest in the case of a voltmeter. This is connected in series with the coil of the galvanometer.
Teacher's Note: Shunt shrinks as range grows, so ammeter needs least; a series resistance for a voltmeter is largest.
Exam Note: Least: ammeter; highest: voltmeter.
Free study material for Physics
Step-by-Step Xam Idea Solutions for Class 12 Math
Access Class 12 Mathematics Solutions
Explore reliable mathematical solutions for Xam Idea Solutions Class 12 Physics Chapter 4 Moving Charges And Magnetism Short Answer Questions I tailored for Class 12 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.
Concept-Driven Math Answers
Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.
Next Steps in Your Mathematics Revision
Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.
FAQs
They are chapter-wise solved questions from the book for Class 12 Physics. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.