Official Textbook Solutions: Class 12 Physics Chapter 04 Moving Charges And Magnetism
Explore reliable textbook solutions for Chapter 04 Moving Charges And Magnetism tailored for Class 12 learners using methodologies. Utilizing these Physics answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.
Chapter-wise Solutions for Physics: Chapter 04 Moving Charges And Magnetism
View or download the dedicated Chapter 04 Moving Charges And Magnetism solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Physics.
Long Answer Questions
Question 1. State and explain Biot-Savart law. Use it to derive an expression for the magnetic field produced at a point near a long current carrying wire.
Solution.
Biot-Savart law:
Suppose the current I is flowing in a conductor and there is a small current element ‘ab’ of length Δl. According to Biot-Savart the magnetic field (ΔB) produced due to this current element at a point P distant r from the element is given by
ΔB ∝ I Δl sin θ / r² or ΔB = (μ/4π) I Δl sin θ / r² … (i)
Where μ/4π is a constant of proportionality. It depends on the medium between the current element and point of observation (P). μ is called the permeability of medium. Equation (i) is called Biot-Savart law. The product of current (I) and length element (Δl) (i.e., I Δl) is called the current element. Current element is a vector quantity, its direction is along the direction of current. If the conductor is placed in vacuum (or air), then μ is replaced by μ0; where μ0 is called the permeability of free space (or air). In S.I. system μ0 = 4π × 10–7 weber/ampere-metre (or newton/ampere²).
Thus μ0/4π = 10–7 weber/ampere × metre
As in most cases the medium surrounding the conductor is air, therefore, in general, Biot-Savart law is written as ΔB = (μ0/4π) I Δl sin θ / r².
The direction of magnetic field is perpendicular to the plane containing current element and the line joining point of observation to current element. So in vector form the expression for magnetic field takes the form ΔB = (μ0/4π) I (Δl × r)/r³.
Derivation of formula for magnetic field due to a current carrying wire using Biot-Savart law:
Consider a wire EF carrying current I in upward direction. The point of observation is P at a finite distance R from the wire. If PM is perpendicular dropped from P on wire; then PM = R. The wire may be supposed to be formed of a large number of small current elements. Consider a small element CD of length δl at a distance l from M.
Let ∠CPM = φ, and ∠CPD = δφ, ∠PDM = θ
The length δl is very small, so that ∠PCM may also be taken equal to θ. The perpendicular dropped from C on PD is CN. The angle between the elements I δl and r (= CP) is (π – θ). Therefore according to Biot-Savart law, the magnetic field due to current element I δl at P is
δB = (μ0/4π) I δl sin(π – θ)/r² = (μ0/4π) I δl sin θ/r² … (i)
But in ΔCND, sin θ = sin(∠CDN) = CN/CD = r δφ/δl, or δl sin θ = r δφ
∴ From equation (i): δB = (μ0/4π) I r δφ/r² = (μ0/4π) I δφ/r … (ii)
Again from fig., cos φ = R/r ⇒ r = R/cos φ. From equation (ii): δB = (μ0/4π) I cos φ δφ/R … (iii)
If the wire is of finite length and its ends make angles α and β with line MP, then net magnetic field (B) at P is obtained by summing over magnetic fields due to all current elements, i.e.,
B = ∫ from –β to α of (μ0/4π) I cos φ dφ/R = (μ0I/4πR) [sin φ] from –β to α = (μ0I/4πR) [sin α – sin(–β)]
i.e., B = (μ0I/4πR)(sin α + sin β)
This is expression for magnetic field due to current carrying wire of finite length.
If the wire is of infinite length (or very long), then α = β = π/2
∴ B = (μ0I/4πR)(sin π/2 + sin π/2) = (μ0I/4πR)[1 + 1] or B = μ0I/2πR.
Teacher's Note: Using δl sin θ = r δφ turns the sum into an integral of cos φ dφ.
Exam Note: Finite wire: μ0I(sin α + sin β)/4πR; long wire: μ0I/2πR.
Question 2. Answer the following questions. (i) State Biot-Savart Law. Using this law, find an expression for the magnetic field at the centre of a circular coil of N-turns, radius r, carrying current I. (ii) Sketch the magnetic field for a circular current loop, clearly indicating the direction of the field. [CBSE (F) 2010, Central 2016]
Solution.
(i) Biot-Savart Law: The magnetic field ΔB due to a current element I Δl at a point distant r from it is ΔB = (μ0/4π) I Δl sin θ / r², perpendicular to the plane of I Δl and r (see Question 1 above).
Magnetic field at the centre of circular loop:
Consider a circular coil of radius R carrying current I in anticlockwise direction. Say, O is the centre of coil, at which magnetic field is to be computed. The coil may be supposed to be formed of a large number of current elements. Consider a small current element ‘ab’ of length Δl. According to Biot Savart law the magnetic field due to current element ‘ab’ at centre O is ΔB = (μ0/4π) I Δl sin θ / R²
Where θ is angle between current element ab and the line joining the element to the centre O. Here θ = 90° because current element at each point of circular path is perpendicular to the radius. Therefore magnetic field produced at O, due to current element ab is ΔB = (μ0/4π) I Δl / R²
According to Maxwell’s right hand rule, the direction of magnetic field at O is upward, perpendicular to the plane of coil. The direction of magnetic field due to all current elements is the same. Therefore the resultant magnetic field at the centre will be the sum of magnetic fields due to all current elements. Thus
B = ΣΔB = Σ(μ0/4π) I Δl/R² = (μ0/4π)(I/R²) ΣΔl
But ΣΔl = total length of circular coil = 2πR (for one turn) ∴ B = (μ0/4π)(I/R²)(2πR) or B = μ0I/2R
If the coil contains N turns, then ΣΔl = N · 2πR and B = (μ0I/4πR²)(N · 2πR) or B = μ0NI/2R.
Here current in the coil is anticlockwise and the direction of magnetic field is perpendicular to the plane of coil upward; but if the current in the coil is clockwise, then the direction of magnetic field will be perpendicular to the plane of coil downward.
(ii) Magnetic field lines of a circular current loop (shown in cross-section; the field lines pass through the loop in one direction and return outside as closed curves):
Teacher's Note: Every element is perpendicular to the radius and equidistant from O, so the contributions simply add to μ0NI/2R.
Exam Note: Centre of N-turn coil: B = μ0NI/2R.
Question 3. Answer the following questions. (i) Derive an expression for the magnetic field at a point on the axis of a current carrying circular loop. [CBSE (AI) 2013; (F) 2010] (ii) Two co-axial circular loops L1 and L2 of radii 3 cm and 4 cm are placed as shown. What should be the magnitude and direction of the current in the loop L2 so that the net magnetic field at the point O be zero?
Solution.
(i) Magnetic field at the axis of a circular loop: Consider a circular loop of radius R carrying current I, with its plane perpendicular to the plane of paper. Let P be a point of observation on the axis of this circular loop at a distance x from its centre O. Consider a small element of length dl of the coil at point A. The magnitude of the magnetic induction dB at point P due to this element is given by dB = (μ0/4π) I dl sin α′/r² … (i)
The direction of dB is perpendicular to the plane containing dl and r and is given by right hand screw rule. As the angle between I dl and r is 90°, the magnitude of the magnetic induction dB is given by dB = (μ0/4π) I dl sin 90°/r² = μ0 I dl / 4π r² … (ii)
If we consider the magnetic induction produced by the whole of the circular coil, then by symmetry the components of magnetic induction perpendicular to the axis will be cancelled out, while those parallel to the axis will be added up. Thus the resultant magnetic induction B at axial point P is along the axis and may be evaluated as follows:
The component of dB along the axis, dBx = (μ0/4π)(I dl/r²) sin α … (iii)
But sin α = R/r and r = (R² + x²)1/2
∴ dBx = (μ0/4π)(I dl/r²)(R/r) = (μ0/4π) I R dl/(R² + x²)3/2 … (iv)
Therefore the magnitude of resultant magnetic induction at axial point P due to the whole circular coil is given by B = ∮ (μ0/4π) I R dl/(R² + x²)3/2 = [μ0IR/4π(R² + x²)3/2] ∮ dl … (v)
But ∮ dl = length of the loop = 2πR
Therefore, B = μ0 I R (2πR)/4π(R² + x²)3/2 = μ0 I R²/2(R² + x²)3/2 (along the axis). [At centre, x = 0, B = μ0I/2R]
If the coil contains N turns, then B = μ0 N I R²/2(R² + x²)3/2 tesla … (vi)
(ii) Using the axial-field formula for each loop (distance of O from L1 is 4 cm and from L2 is 3 cm):
B1 = μ0 I1 R1²/2(R1² + x1²)3/2 and B2 = μ0 I2 R2²/2(R2² + x2²)3/2
For both loops R² + x² = 3² + 4² = 25 cm², so the denominators are equal. For B1 = B2 in magnitude: I1R1² = I2R2² ⇒ I2 = 1 × 3²/4² = 9/16 A ≈ 0.56 A.
The two fields must be opposite at O, so the current in L2 must circulate in the sense opposite to that in L1 (as seen from the same side along the axis).
Teacher's Note: Symmetry cancels perpendicular components of dB, so only the axial sin α part survives and is integrated over 2πR.
Exam Note: B = μ0IR²/2(R² + x²)3/2; (ii) 9/16 A opposite.
Question 4. Answer the following questions. (i) A straight thick long wire of uniform circular cross-section of radius ‘a’ is carrying a steady current I. The current is uniformly distributed across the cross-section. Use Ampere’s circuital law to obtain a relation showing the variation of the magnetic field (Br) inside and outside the wire with distance r, (r ≤ a) and (r > a) of the field point from the centre of its cross-section. What is the magnetic field at the surface of this wire? Plot a graph showing the nature of this variation. (ii) Calculate the ratio of magnetic field at a point above the surface of the wire to that at a point below its surface. What is the maximum value of the field of this wire? [CBSE Delhi 2010; Chennai 2015]
Solution.
(i) Magnetic field due to a straight thick wire of uniform cross-section: Consider an infinitely long cylindrical wire of radius a, carrying current I. Suppose that the current is uniformly distributed over whole cross-section of the wire. The cross-section of wire is circular. Current per unit cross-sectional area i = I/πa² … (i)
Magnetic field at external points (r > a): We consider a circular path of radius r (> a) passing through external point P concentric with circular cross-section of wire. By symmetry the strength of magnetic field at every point of circular path is same and the direction of magnetic field is tangential to path at every point. So line integral of magnetic field B around the circular path ∮B · dl = ∮B dl cos 0° = B 2πr
Current enclosed by path = total current on circular cross-section of cylinder = I. By Ampere’s circuital law ∮B · dl = μ0 × current enclosed by path ⇒ B 2πr = μ0 × I ⇒ B = μ0I/2πr
This expression is same as the magnetic field due to a long current carrying straight wire. This shows that for external points the current flowing in wire may be supposed to be concentrated at the axis of cylinder.
Magnetic field at internal points (r < a): Consider a circular path of radius r (< a), passing through internal point Q concentric with circular cross-section of the wire. In this case the assumed circular path encloses only a part of the current carrying circular cross-section of the wire.
∴ Current enclosed by path = current per unit cross-section × cross section of assumed circular path = i × πr² = (I/πa²) × πr² = Ir²/a²
∴ By Ampere’s circuital law ∮B · dl = μ0 × current enclosed by path ⇒ B · 2πr = μ0 × Ir²/a² ⇒ B = μ0Ir/2πa²
Clearly, magnetic field strength inside the current carrying wire is directly proportional to distance of the point from the axis of wire.
At surface of cylinder r = a, so magnetic field at surface of wire Bs = μ0I/2πa (maximum value).
The variation of magnetic field strength (B) with distance (r) from the axis of wire for internal and external points is shown in figure.
(ii) Just above the surface (r → a from outside) B = μ0I/2πa, and just below the surface (r → a from inside) B = μ0Ia/2πa² = μ0I/2πa. Hence the ratio of the field above the surface to that below it is 1 : 1 (the field is continuous at the surface). The maximum value of the field is μ0I/2πa, at the surface of the wire.
Teacher's Note: Inside, enclosed current grows as r², so B ∝ r; outside all of I is enclosed, so B ∝ 1/r.
Exam Note: Inside B = μ0Ir/2πa²; outside μ0I/2πr; maximum at surface.
Question 5. Using Ampere’s circuital law find an expression for the magnetic field at a point on the axis of a long solenoid with closely wound turns. [CBSE (F) 2010]
Solution.
Magnetic field due to a current carrying long solenoid: A solenoid is a long wire wound in the form of a close-packed helix, carrying current. To construct a solenoid a large number of closely packed turns of insulated copper wire are wound on a cylindrical tube of card-board or china clay. When an electric current is passed through the solenoid, a magnetic field is produced within the solenoid. If the solenoid is long and the successive insulated copper turns have no gaps, then the magnetic field within the solenoid is uniform; with practically no magnetic field outside it. The reason is that the solenoid may be supposed to be formed of a large number of circular current elements. The magnetic field due to a circular loop is along its axis and the current in upper and lower straight parts of solenoid is equal and opposite. Due to this the magnetic field in a direction perpendicular to the axis of solenoid is zero and so the resultant magnetic field is along the axis of the solenoid.
If there are ‘n’ number of turns per metre length of solenoid and I amperes is the current flowing, then magnetic field at axis of long solenoid B = μ0 n I. If there are N turns in length l of wire, then n = N/l or B = μ0 N I/l.
Derivation: Consider a symmetrical long solenoid having number of turns per unit length equal to n. Let I be the current flowing in the solenoid, then by right hand rule, the magnetic field is parallel to the axis of the solenoid.
Field outside the solenoid: Consider a closed path abcd. Applying Ampere’s law to this path ∮B · dl = μ × 0 (since net current enclosed by path is zero). As dl ≠ 0, ∴ B = 0. This means that the magnetic field outside the solenoid is zero.
Field inside the solenoid: Consider a closed path pqrs. The line integral of magnetic field along path pqrs is ∮pqrs B · dl = ∫pq B · dl + ∫qr B · dl + ∫rs B · dl + ∫sp B · dl … (i)
For path pq, B and dl are along the same direction, ∴ ∫pq B · dl = ∫B dl = Bl (pq = l say). For paths qr and sp, B and dl are mutually perpendicular, ∴ ∫qr B · dl = ∫sp B · dl = ∫B dl cos 90° = 0. For path rs, B = 0 (since field is zero outside a solenoid), ∴ ∫rs B · dl = 0.
In view of these, equation (i) gives ∮pqrs B · dl = ∫pq B · dl = Bl … (ii)
By Ampere’s law ∮B · dl = μ0 × net current enclosed by path ∴ Bl = μ0 (n l I) ∴ B = μ0 n I. This is the well known result.
Teacher's Note: Only side pq inside the solenoid contributes to the loop integral, and the enclosed current is nlI.
Exam Note: Rectangular loop gives Bl = μ0nlI, so B = μ0nI.
Question 6. Using Ampere’s circuital law, derive an expression for the magnetic field along the axis of a toroidal solenoid. [CBSE (AI) 2013] OR (a) State Ampere’s circuital law. Use this law to obtain the expression for the magnetic field inside an air cored toroid of average radius ‘r’, having ‘n’ turns per unit length and carrying a steady current I. (b) An observer to the left of a solenoid of N turns each of cross section area ‘A’ observes that a steady current I in it flows in the clockwise direction. Depict the magnetic field lines due to the solenoid specifying its polarity and show that it acts as a bar magnet of magnetic moment m = NIA. [CBSE Delhi 2015]
Solution.
Ampere’s circuital law: the line integral of the magnetic field B around any closed path equals μ0 times the net current I enclosed by the path, ∮B · dl = μ0 I.
Magnetic field due to a toroidal solenoid: A long solenoid shaped in the form of closed ring is called a toroidal solenoid (or endless solenoid). Let n be the number of turns per unit length of toroid and I the current flowing through it. The current causes the magnetic field inside the turns of the solenoid. The magnetic lines of force inside the toroid are in the form of concentric circles. By symmetry the magnetic field has the same magnitude at each point of circle and is along the tangent at every point on the circle.
(i) For points inside the core of toroid: Consider a circle of radius r in the region enclosed by turns of toroid. Now we apply Ampere’s circuital law to this circular path, i.e., ∮B · dl = μ0 I … (i)
∮B · dl = ∮B dl cos 0° = B · 2πr. Length of toroid = 2πr; N = number of turns in toroid = n(2πr) and current in one turn = I. ∴ Current enclosed by circular path = (n 2πr) I. ∴ Equation (i) gives B 2πr = μ0 (n 2πr I) ⇒ B = μ0 n I.
(ii) For points in the open space inside the toroid: No current flows through the Amperian loop, so I = 0. ∮B · dl = μ0 I = 0 ⇒ |B|inside = 0.
(iii) For points in the open space exterior to the toroid: The net current entering the plane of the toroid is exactly cancelled by the net current leaving the plane of the toroid. ∮B · dl = 0 ⇒ |B|exterior = 0.
(b) For the observer, the current is flowing in clockwise direction, so the end of the solenoid facing the observer behaves as the South pole and the far end as the North pole. The field lines run through the solenoid from S to N (away from the observer) and close outside from N to S.
The solenoid can be regarded as a combination of circular loops placed side by side, each behaving like a magnet of magnetic moment IA, where I is the current and A area of the loop. These magnets neutralise each other except at the ends where south and north poles appear. Magnetic moment of the solenoid (bar magnet) = NIA.
Teacher's Note: On a circle in the core the enclosed current is n(2πr)I; loops outside enclose zero net current.
Exam Note: Core: B = μ0nI; hole and outside: zero; m = NIA.
Question 7. (i) Draw a neat labeled diagram of a cyclotron. (ii) Show that time period of ions in cyclotron is independent of both the speed of ion and radius of circular path. What is the significance of this property? (iii) An electron after being accelerated through a potential difference of 100 V enters a uniform magnetic field of 0.004 T perpendicular to its direction of motion. Calculate the radius of the path described by the electron. [CBSE East 2016] OR (a) Explain with the help of a labelled diagram construction, principle and working of a cyclotron stating clearly the functions of electric and magnetic fields on a charged particle. Derive an expression for time period of revolution and cyclotron frequency. Show that it is independent of the speed of the charged particles and radius of the circular path. [CBSE (AI) 2009] (b) What is resonance condition? How is it used to accelerated charged particles? [CBSE (AI) 2009] (c) Also find the total KE attained by the charged particle. (d) Is there an upper limit on the energy acquired by the particle? Give reason. OR With the help of a labelled diagram, state the underlying principle of a cyclotron. Explain clearly how it works to accelerate the charged particles. Show that cyclotron frequency is independent of energy of the particle. Is there an upper limit on the energy acquired by the particle? Give reason. [CBSE Delhi 2011, 2014] OR (a) Draw a schematic sketch of a cyclotron. Explain clearly the role of crossed electric and magnetic field in accelerating the charge. Hence derive the expression for the kinetic energy acquired by the particles. (b) An α-particle and a proton are released from the centre of the cyclotron and made to accelerate. (i) Can both be accelerated at the same cyclotron frequency? Give reason to justify your answer. (ii) When they are accelerated in turn, which of the two will have higher velocity at the exit slit of the dees? [CBSE (AI) 2013]
Solution.
Cyclotron: The cyclotron, devised by Lawrence and Livingston, is a device for accelerating charged particles to high speed by the repeated application of accelerating potentials.
Principle: A charged particle moving perpendicular to a uniform magnetic field describes a circle whose period does not depend on its speed. So an alternating electric field of the same frequency, applied across a gap, can accelerate the particle again and again, each time it crosses the gap.
Side view: dees placed between the poles of a strong electromagnet.
Construction: The cyclotron consists of two flat semi-circular metal boxes called ‘dees’ and are arranged with a small gap between them. A source of ions is located near the mid-point of the gap between the dees. The dees are connected to the terminals of a radio frequency oscillator, so that a high frequency alternating potential of several million cycles per second exists between the dees. Thus dees act as electrodes. The dees are enclosed in an insulated metal box containing gas at low pressure. The whole apparatus is placed between the poles of a strong electromagnet which provides a magnetic field perpendicular to the plane of the dees.
Working: The positive ions produced from a source S at the centre are accelerated by a dee which is at negative potential at that moment. Due to the presence of perpendicular magnetic field the ion will move in a circular path inside the dees. The magnetic field and the frequency of the applied voltages are so chosen that as the ion comes out of a dee, the dees change their polarity (positive becoming negative and vice-versa) and the ion is further accelerated and moves with higher velocity along a circular path of greater radius. The phenomenon is continued till the ion reaches at the periphery of the dees where an auxiliary negative electrode (deflecting plate) deflects the accelerated ion on the target to be bombarded.
Role of electric field: Electric field accelerates the charge particle passing through the gap.
Role of magnetic field: As the accelerated charge particle enters normally to the uniform magnetic field, it experiences a magnetic force in the form of centripetal force and charge particle moves on a semicircular path of increasing radii in each dee (D1 or D2) alternately.
Expression for period of revolution and frequency:
Suppose the positive ion with charge q moves in a dee with a velocity v, then qvB = mv²/r or r = mv/qB … (i), where m is the mass and r the radius of the path of ion in the dee and B is the strength of the magnetic field.
The angular velocity ω of the ion is given by ω = v/r = qB/m (from eq. i) … (ii)
The time taken by the ion in describing a semi-circle, i.e., in turning through an angle π is t = π/ω = πm/Bq … (iii)
Thus the time is independent of the speed of the ion i.e., although the speed of the ion goes on increasing with increase in the radius (from eq. i) when it moves from one dee to the other, yet it takes the same time in each dee.
From eq. (iii) it is clear that for a particular ion, m/q being known, B can be calculated for producing resonance with the high frequency alternating potential.
Significance: The applied voltage is adjusted so that the polarity of dees is reversed in the same time that it takes the ion to complete one half of the revolution.
Resonance condition: The condition of working of cyclotron is that the frequency of radio frequency alternating potential must be equal to the frequency of revolution of charged particles within the dees. This is called resonance condition. Now for the cyclotron to work, the applied alternating potential should also have the same semi-periodic time (T/2) as that taken by the ion to cross either dee, i.e., T/2 = t = πm/qB … (iv) or T = 2πm/qB … (v)
This is the expression for period of revolution. Obviously, period of revolution is independent of speed of charged particle and radius of circular path. ∴ Frequency of revolution of particles f = 1/T = qB/2πm. This frequency is called the cyclotron frequency. Clearly the cyclotron frequency is independent of speed (and hence energy) of particle.
Expression for KE attained:
If R be the radius of the path and vmax the velocity of the ion when it leaves the periphery, then in accordance with eq. (i), vmax = qBR/m … (vi)
The kinetic energy of the ion when it leaves the apparatus is KE = ½ m vmax² = q²B²R²/2m … (vii)
When charged particle crosses the gap between dees it gains KE = qV. In one revolution, it crosses the gap twice, therefore if it completes n revolutions before emerging from the dees, the kinetic energy gained = 2nqV … (viii). Thus KE = q²B²R²/2m = 2nqV.
Upper limit on energy: Yes. From KE = q²B²R²/2m, the upper limit of energy depends upon the maximum radius R of the dees (and the field B). (At very high speeds the relativistic increase of mass also changes the revolution frequency, so the particle falls out of resonance with the oscillator.)
α-particle and proton:
(i) No. Cyclotron frequency f = qB/2πm depends on the (q/m) ratio. Since (q/m)α = 2e/4mp = e/2mp is less than (q/m)p = e/mp, fα = fp/2, i.e. fα < fp, so one oscillator frequency cannot accelerate both.
(ii) From vmax = qBR/m, vmax ∝ q/m for fixed B and R. For proton q/m = e/mp and for α-particle q/m = 2e/4mp = e/2mp. Hence the proton acquires higher velocity (twice that of the α-particle) at the exit slit.
Numerical: r = mv/qB = √(2mqV)/qB = √(2 × 9.1 × 10–31 × 1.6 × 10–19 × 100) / (1.6 × 10–19 × 0.004) m = (5.4 × 10–24)/(6.4 × 10–22) m = 8.4 × 10–3 m (≈ 8.4 mm).
Teacher's Note: Period T = 2πm/qB has no speed or radius, so a fixed-frequency oscillator stays in step with the ions.
Exam Note: T = 2πm/qB; KE = q²B²R²/2m; r ≈ 8.4 mm.
Question 8. Answer the following questions. (i) Consider a beam of charged particles moving with varying speeds. Show how crossed electric and magnetic fields can be used to select charged particles of a particular velocity? (ii) Name another device/machine which uses crossed electric and magnetic fields. What does this machine do and what are the functions of magnetic and electric fields in this machine? Where do these field exist in this machine? Write about their natures. [CBSE South 2016]
Solution.
(i) If we adjust the value of E and B such that magnitude of the two forces are equal, then total force on the charge is zero and the charge will move in the fields undeflected. This happens when qE = Bqv or v = E/B.
Particles with v > E/B are deflected by the larger magnetic force; those with v < E/B by the larger electric force. Only particles of speed v = E/B pass undeflected through the exit slit S2, so the arrangement selects charged particles of a particular velocity.
(ii) Name of the device: Cyclotron. It accelerates charged particles or ions. Electric field accelerates the charged particles. Magnetic field makes particles to move in circle. Electric field exists between the dees. Magnetic field exists both inside and outside the dees. Magnetic field is uniform. Electric field is alternating in nature.
Teacher's Note: Equal and opposite forces qE and qvB cancel only at v = E/B; faster or slower particles bend away.
Exam Note: Selected speed v = E/B; device: cyclotron.
Question 9. Derive an expression for the force experienced by a current carrying straight conductor placed in a magnetic field. Under what condition is this force maximum?
Solution.
Force on a current carrying conductor on the basis of force on a moving charge: Consider a metallic conductor of length L, cross-sectional area A placed in a uniform magnetic field B and its length makes an angle θ with the direction of magnetic field B. The current in the conductor is I.
According to free electron model of metals, the current in a metal is due to the motion of free electrons. When a conductor is placed in a magnetic field, the magnetic field exerts a force on every free electron. The sum of forces acting on all electrons is the net force acting on the conductor. If vd is the drift velocity of free electrons, then
Current I = n e A vd … (i), where n is number of free electrons per unit volume.
Magnetic force on each electron = e vd B sin θ … (ii). Its direction is perpendicular to both vd and B.
Volume of conductor V = AL. Therefore, the total number of free electrons in the conductor = nAL.
Net magnetic force on the conductor F = (force on one electron) × (number of electrons) = (e vd B sin θ)(nAL) = (n e A vd) BL sin θ
Using equation (i): F = I B L sin θ … (iii) ∴ F = I L B sin θ
This is the general formula for the force acting on a current carrying conductor. In vector form F = I L × B … (iv).
Force will be maximum when sin θ = 1 or θ = 90°. That is when length of conductor is perpendicular to magnetic field.
Teacher's Note: Multiplying the force on one drifting electron by nAL electrons and using I = neAvd gives F.
Exam Note: F = BIL sin θ; maximum when conductor ⊥ B.
Question 10. Two long straight parallel conductors carry steady current I1 and I2 separated by a distance d. If the currents are flowing in the same direction, show how the magnetic field set up in one produces an attractive force on the other. Obtain the expression for this force. Hence define one ampere. [CBSE Delhi 2016] OR Derive an expression for the force per unit length between two long straight parallel current carrying conductors. Hence define SI unit of current (ampere). [CBSE (AI) 2009, 2010, 2012, Patna 2015]
Solution.
Suppose two long thin straight conductors (or wires) PQ and RS are placed parallel to each other in vacuum (or air) carrying currents I1 and I2 respectively. It has been observed experimentally that when the currents in the wire are in the same direction, they experience an attractive force (fig. a) and when they carry currents in opposite directions, they experience a repulsive force (fig. b).
Let the conductors PQ and RS carry currents I1 and I2 in same direction and placed at separation r.
Consider a current-element ‘ab’ of length ΔL of wire RS. The magnetic field produced by current-carrying conductor PQ at the location of other wire RS is B1 = μ0I1/2πr … (i)
According to Maxwell’s right hand rule, the direction of B1 will be perpendicular to the plane of paper and directed downward (into the paper). Due to this magnetic field, each element of other wire experiences a force. The direction of current element is perpendicular to the magnetic field; therefore the magnetic force on element ab of length ΔL is ΔF = B1 I2 ΔL sin 90° = (μ0I1/2πr) I2 ΔL
∴ The total force on conductor of length L will be F = (μ0I1I2/2πr) ΣΔL = μ0I1I2L/2πr
∴ Force acting per unit length of conductor f = F/L = μ0I1I2/2πr N/m … (ii)
According to Fleming’s left hand rule, the direction of magnetic force will be towards PQ i.e. the force will be attractive. On the other hand if the currents I1 and I2 in wires are in opposite directions, the force will be repulsive. The magnitude of force in each case remains the same.
Definition of SI unit of current (ampere): In SI system of fundamental unit of current ‘ampere’ is defined assuming the force between the two current carrying wires as standard. The force between two parallel current carrying conductors of separation r is f = F/L = μ0I1I2/2πr N/m
If I1 = I2 = 1 A, r = 1 m, then f = μ0/2π = 2 × 10–7 N/m
Thus 1 ampere is the current which when flowing in each of parallel conductors placed at separation 1 m in vacuum exert a force of 2 × 10–7 N on 1 m length of either wire.
Teacher's Note: Wire PQ’s field at RS is μ0I1/2πr; the force on RS points toward PQ for parallel currents.
Exam Note: f = μ0I1I2/2πr; 1 A gives 2 × 10–7 N/m.
Question 11. Derive an expression for torque acting on a rectangular current carrying loop kept in a uniform magnetic field B. Indicate the direction of torque acting on the loop. [CBSE Delhi 2013; (F) 2009] OR Deduce the expression for the torque τ acting on a planar loop of area A and carrying current I placed in a uniform magnetic field B. If the loop is free to rotate, what would be its orientation in stable equilibrium? [CBSE Ajmer 2015]
Solution.
Torque on a current carrying loop: Consider a rectangular loop PQRS of length l, breadth b suspended in a uniform magnetic field B. The length of loop = PQ = RS = l and breadth QR = SP = b. Let at any instant the normal to the plane of loop make an angle θ with the direction of magnetic field B and I be the current in the loop. We know that a force acts on a current carrying wire placed in a magnetic field. Therefore, each side of the loop will experience a force. The net force and torque acting on the loop will be determined by the forces acting on all sides of the loop. Suppose that the forces on sides PQ, QR, RS and SP are F1, F2, F3 and F4 respectively.
The sides QR and SP make angle (90° – θ) with the direction of magnetic field. Therefore each of the forces F2 and F4 acting on these sides has same magnitude F′ = B I b sin (90° – θ) = B I b cos θ. According to Fleming’s left hand rule the forces are equal and opposite and their line of action is same (along the axis of the loop). Therefore these forces cancel each other i.e. the resultant of F2 and F4 is zero.
The sides PQ and RS of current loop are perpendicular to the magnetic field, therefore the magnitude of each of forces F1 and F3 acting on sides PQ and RS is F = B I l. They are equal and opposite, but their lines of action are different; therefore the resultant force of F1 and F3 is zero, but they form a couple called the deflecting couple. When the normal to plane of loop makes an angle θ with the direction of magnetic field the perpendicular distance between F1 and F3 is b sin θ.
Side view of the loop (current out of the page in the upper side, into the page in the lower side):
∴ Moment of couple or Torque τ = (magnitude of one force F) × (perpendicular distance) = (BIl)(b sin θ) = I (lb) B sin θ. But lb = area of loop = A (say) ∴ Torque τ = I A B sin θ. If the loop contains N-turns, then τ = N I A B sin θ.
In vector form τ = N I A × B. The magnetic dipole moment of rectangular current loop = M = NIA ∴ τ = M × B.
Direction of torque is perpendicular to direction of area of loop as well as the direction of magnetic field i.e., along I A × B.
The current loop would be in stable equilibrium, if magnetic dipole moment is in the direction of the magnetic field (B), i.e. θ = 0°, when the torque is zero.
Teacher's Note: Forces on QR and SP cancel along one line; those on PQ and RS form a couple.
Exam Note: τ = NIAB sin θ; stable when M ∥ B.
Question 12. Answer the following questions. (i) What is the relationship between the current and the magnetic moment of a current carrying circular loop? (ii) Deduce an expression for magnetic dipole moment of an electron revolving around a nucleus in a circular orbit. Indicate the direction of magnetic dipole moment? Use the expression to derive the relation between the magnetic moment of an electron moving in a circle and its related angular momentum? [CBSE (AI) 2010; (F) 2009] (iii) A muon is a particle that has the same charge as an electron but is 200 times heavier than it. If we had an atom in which the muon revolves around a proton instead of an electron, what would be the magnetic moment of the muon in the ground state of such an atom?
Solution.
(i) Relation between current and magnetic moment: Magnetic moment, for a current carrying coil is M = IA. For circular coil of radius r, A = πr², ∴ M = I · πr².
(ii) Magnetic moment of an electron moving in a circle: Consider an electron revolving around a nucleus (N) in circular path of radius r with speed v. The revolving electron is equivalent to electric current I = e/T, where T is period of revolution = 2πr/v. ∴ I = e/(2πr/v) = ev/2πr … (i)
Area of current loop (electron orbit), A = πr². Magnetic moment due to orbital motion Ml = IA = (ev/2πr)(πr²) = evr/2 … (ii)
This equation gives the magnetic dipole moment of a revolving electron. The direction of magnetic moment is along the axis (opposite to the angular momentum L, because the electron is negatively charged).
Relation between magnetic moment and angular momentum: Orbital angular momentum of electron L = me v r … (iii), where me is mass of electron. Dividing (ii) by (iii), we get Ml/L = (e v r/2)/(me v r) = e/2me, i.e. magnitude Ml = (e/2me) L … (iv)
This is expression of magnetic moment of revolving electron in terms of angular momentum of electron. In vector form Ml = –(e/2me) L … (v).
(iii) For the muon (charge e, mass mμ = 200 me) in the ground state, the angular momentum is the same as for the electron in the ground state, L = h/2π (Bohr’s quantisation, n = 1). So
Mμ = (e/2mμ) L = eh/(4π mμ) = (1/200) × eh/(4π me) = (1/200) × 9.27 × 10–24 J/T ≈ 4.6 × 10–26 J/T.
Teacher's Note: Current e/T times orbit area πr² gives evr/2; dividing by L = mvr links moment to angular momentum.
Exam Note: M = evr/2; M/L = e/2m; muon ≈ 4.6 × 10–26 J/T.
Question 13. Draw the labelled diagram of a moving coil galvanometer. Prove that in a radial magnetic field, the deflection of the coil is directly proportional to the current flowing in the coil. [CBSE (F) 2012] (a) Draw a labelled diagram of a moving coil galvanometer. Describe briefly its principle and working. (b) Answer the following: (i) Why is it necessary to introduce a cylindrical soft iron core inside the coil of a galvanometer? (ii) Increasing the current sensitivity of a galvanometer may not necessarily increase its voltage sensitivity. Explain, giving reason. [CBSE (AI) 2014] OR Explain, using a labelled diagram, the principle and working of a moving coil galvanometer. What is the function of (i) uniform radial magnetic field, (ii) soft iron core? Define the terms (i) current sensitivity and (ii) voltage sensitivity of a galvanometer. Why does increasing the current sensitivity not necessarily increase voltage sensitivity? [CBSE Allahabad 2015]
Solution.
Moving coil galvanometer: A galvanometer is used to detect current in a circuit.
Construction: It consists of a rectangular coil wound on a non-conducting metallic frame and is suspended by phosphor bronze strip between the pole-pieces (N and S) of a strong permanent magnet. A soft iron core in cylindrical form is placed inside the coil. One end of coil is attached to suspension wire which also serves as one terminal (T1) of galvanometer. The other end of coil is connected to a loosely coiled strip, which serves as the other terminal (T2). The other end of the suspension is attached to a torsion head which can be rotated to set the coil in zero position. A mirror (M) is fixed on the phosphor bronze strip by means of which the deflection of the coil is measured by the lamp and scale arrangement. The levelling screws are also provided at the base of the instrument.
The pole pieces of the permanent magnet are cylindrical so that the magnetic field is radial at any position of the coil.
Principle and working: When current (I) is passed in the coil, torque τ acts on the coil, given by τ = NIAB sin θ, where θ is the angle between the normal to plane of coil and the magnetic field of strength B, N is the number of turns in a coil. A current carrying coil, in the presence of a magnetic field, experiences a torque, which produces proportionate deflection, i.e., deflection φ ∝ τ (torque).
When the magnetic field is radial, as in the case of cylindrical pole pieces and soft iron core, then in every position of coil the plane of the coil is parallel to the magnetic field lines, so that θ = 90° and sin 90° = 1. The coil experiences a uniform couple. Deflecting torque τ = NIAB.
If C is the torsional rigidity of the wire and φ is the twist of suspension strip, then restoring torque = Cφ. For equilibrium, deflecting torque = restoring torque, i.e. NIAB = Cφ ∴ φ = (NAB/C) I … (i), i.e. φ ∝ I.
Deflection of coil is directly proportional to current flowing in the coil and hence we can construct a linear scale.
Importance (or function) of uniform radial magnetic field: Torque for current carrying coil in a magnetic field is τ = NIAB sin θ. In radial magnetic field sin θ = 1, so torque is τ = NIAB. This makes the deflection (φ) proportional to current. In other words, the radial magnetic field makes the scale linear.
Function of soft iron core: The cylindrical soft iron core makes the field radial and increases the strength of the magnetic field, i.e., the magnitude of the torque.
Sensitivity of galvanometer: Current sensitivity is defined as the deflection of coil per unit current flowing in it: SI = φ/I = NAB/C … (i). Voltage sensitivity is defined as the deflection of coil per unit potential difference across its ends: SV = φ/V = NAB/(RgC) … (ii), where Rg is resistance of galvanometer.
Clearly for greater sensitivity number of turns N, area A and magnetic field strength B should be large and torsional rigidity C of suspension should be small.
Dividing (ii) by (i): SV/SI = 1/Rg ⇒ SV = SI/Rg.
Clearly the voltage sensitivity depends on current sensitivity and the resistance of galvanometer. If we increase current sensitivity (for example by increasing N) the resistance of the coil also increases, so it is not certain that voltage sensitivity will be increased. Thus, the increase of current sensitivity does not imply the increase of voltage sensitivity.
Teacher's Note: Radial field keeps the coil plane parallel to B, so torque stays NIAB and deflection stays proportional to current.
Exam Note: NIAB = Cφ gives φ ∝ I; SV = SI/Rg.
Question 14. With the help of a circuit, show how a moving coil galvanometer can be converted into an ammeter of a given range. Write the necessary mathematical formula.
Solution.
Conversion of galvanometer into ammeter: An ammeter is a low resistance galvanometer and is connected in series in a circuit to read current directly. The resistance of an ammeter is to be made as low as possible so that it may read current without any appreciable error. Therefore to convert a galvanometer into ammeter a shunt resistance (i.e. small resistance in parallel) is connected across the coil of galvanometer.
Let G be the resistance of galvanometer and Ig the current required for full scale deflection. Suppose this galvanometer is to be converted into ammeter of range I ampere and the value of shunt required is S. If IS is current in shunt, then from the figure
I = Ig + IS ⇒ IS = (I – Ig) … (i)
Also potential difference across A and B, (VAB) = IS · S = Ig · G. Substituting value of IS from (i), we get
(I – Ig) S = Ig G or I S – Ig S = Ig G or I S = Ig (S + G), i.e. Ig = [S/(S + G)] I … (ii)
i.e. required shunt, S = G Ig/(I – Ig) … (iii)
This is the working equation of conversion of galvanometer into ammeter. The resistance (RA) of ammeter so formed is given by 1/RA = 1/S + 1/G or 1/RA = (S + G)/SG ⇒ RA = SG/(S + G).
If k is figure of merit of the galvanometer and n is the number of scale divisions, then Ig = nk. Out of the total main current I amperes, only a small permissible value Ig flows through the galvanometer and the rest IS = (I – Ig) passes through the shunt.
Remark: An ideal ammeter has zero resistance.
Teacher's Note: Shunt and galvanometer share the same potential difference, so IgG = (I – Ig)S fixes the shunt.
Exam Note: S = GIg/(I – Ig); RA = SG/(S + G).
Question 15. A galvanometer of resistance G is converted into a voltmeter to measure upto V volts by connecting a resistance R1 in series with the coil. If a resistance R2 is connected in series with it, then it can measure upto V/2 volts. Find the resistance, in terms of R1 and R2, required to be connected to convert it into a voltmeter that can read upto 2V. Also find the resistance G of the galvanometer in terms of R1 and R2. [CBSE Delhi 2015]
Solution.
Let Ig be the current through galvanometer at full deflection.
To measure V volts, V = Ig (G + R1) … (i)
To measure V/2 volts, V/2 = Ig (G + R2) … (ii)
To measure 2V volts, with series resistance R3, 2V = Ig (G + R3) … (iii)
Dividing (i) by (ii): 2 = (G + R1)/(G + R2) ⇒ 2G + 2R2 = G + R1 ⇒ G = R1 – 2R2
Putting the value of G in (i): Ig = V/(R1 – 2R2 + R1) ⇒ Ig = V/(2R1 – 2R2)
Substituting the value of G and Ig in equation (iii): 2V = [V/(2R1 – 2R2)] (R1 – 2R2 + R3)
4R1 – 4R2 = R1 – 2R2 + R3 ⇒ R3 = 3R1 – 2R2
Hence the resistance to be connected in series for a 2V range is 3R1 – 2R2, and the resistance of the galvanometer is G = R1 – 2R2.
Teacher's Note: The full-scale current Ig is fixed, so each voltage range gives V = Ig(G + series resistance).
Exam Note: G = R1 – 2R2; R3 = 3R1 – 2R2.
Free study material for Physics
Download Xam Idea Solutions for Class 12 Math PDF
Complete Math Solutions for Xam Idea Solutions Class 12 Physics Chapter 4 Moving Charges And Magnetism Long Answer Questions
Access the complete chapter-wise PDF for Xam Idea Solutions Class 12 Physics Chapter 4 Moving Charges And Magnetism Long Answer Questions. These structured Xam Idea Solutions solutions for Class 12 Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.
Step-by-Step Mathematical Explanations
Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.
Next Steps in Your Mathematics Revision
Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.
FAQs
They are chapter-wise solved questions from the book for Class 12 Physics. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.