Xam Idea Solutions Class 12 Physics Chapter 15 Communication Systems Very Short Answer Questions

Official Textbook Solutions: Class 12 Physics Chapter 15 Communication Systems

Access comprehensive textbook solutions for Chapter 15 Communication Systems using the reference material for Class 12 Physics. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.

Chapter-wise Solutions for Physics: Chapter 15 Communication Systems

Navigate directly to the solved Physics textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.

Very Short Answer Questions

Question 1. Name the essential components of a communication system. [CBSE Central 2016]

Solution.

Transmitter, Medium or Channel and Receiver.

Teacher's Note: A communication system has a source side, a path and a destination side.

Exam Note: List transmitter, channel, receiver.

Question 2. Distinguish between a transducer and a repeater. [CBSE Delhi 2017]

Solution.

Transducer: A device which converts one form of energy into some another form is called a transducer.

Repeater: It is a combination of a receiver and a transmitter. It picks up the signal from the transmitter, amplifies and retransmits it to the receiver.

Teacher's Note: A transducer changes energy form; a repeater amplifies and retransmits signals.

Exam Note: Give one-line definitions of both.

Question 3. What is sky wave propagation? [CBSE Delhi 2011, 2009]

Solution.

Sky wave propagation is a mode of propagation in which communication of radio waves in frequency range 2 MHz–20 MHz takes place due to reflection from the ionosphere.

Teacher's Note: Sky wave propagation relies on ionospheric reflection back to Earth.

Exam Note: Define with ionosphere and frequency band.

Question 4. What is ground wave propagation? [CBSE Delhi 2009]

Solution.

Ground wave propagation is a mode of propagation in which electromagnetic waves of low frequencies 500 KHz–1500 KHz travel directly from one point to another following the surface of earth.

Teacher's Note: Ground waves follow the Earth's surface at low frequencies.

Exam Note: Say wave glides along the surface.

Question 5. What is space wave propagation? [CBSE Delhi 2009]

Solution.

Space wave propagation or line of sight propagation is a propagation of electromagnetic waves from transmitting antenna to receiving antenna both installed on the ground.

Teacher's Note: Space wave travels straight between antennas, also called line of sight.

Exam Note: Define as straight-line propagation.

Question 6. Give two examples of communication system which use space wave mode. [CBSE Delhi 2010]

Solution.

(i) Television Transmission,

(ii) Satellite Communication

Teacher's Note: TV and satellite links use space waves.

Exam Note: Name two systems.

Question 7. What is meant by modulation? [CBSE Delhi 2009]

Solution.

The original low frequency information/message signal cannot be transmitted over long distances. Therefore, it is essential to superimpose the information signal on a high frequency radio wave called the carrier wave. The process of superposition of information signal on high frequency radio wave (carrier wave) is called modulation.

Teacher's Note: Modulation superimposes a low-frequency message on a high-frequency carrier.

Exam Note: Define modulation and give the reason.

Question 8. Define bandwidth and describe briefly its importance in communicating signals. [CBSE (F) 2015]

Solution.

It is defined as the frequency range over which a given equipment operates.

Importance: To design the equipments used in communication system for distinguishing different message signals.

Teacher's Note: Bandwidth is the frequency range a device or signal occupies.

Exam Note: Define, with one use.

Question 9. Why is the amplitude of modulating signal kept less than the amplitude of carrier wave? [CBSE Delhi 2011]

Solution.

The amplitude of modulating signal is kept less than the amplitude of carrier wave to avoid distortion.

Teacher's Note: Over-modulation distorts the output, so message amplitude stays below carrier.

Exam Note: State to avoid distortion.

Question 10. Why are broadcast frequencies (carrier waves) sufficiently spaced in amplitude modulated wave? [CBSE (F) 2013]

Solution.

To avoid mixing up of signals from different transmitters. This can be done by modulating the signals on high frequency carrier waves, e.g., frequency band for satellite communication is 5.925 – 6.425 GHz.

Teacher's Note: Spaced carriers prevent signals of different transmitters from overlapping.

Exam Note: Say to avoid mixing of signals.

Question 11. How are side bands produced? [CBSE Delhi 2015]

Solution.

Side bands are produced due to the superposition of carrier waves of frequency ωc over modulating or audio signal of frequency ωm. The frequency of lower side band is ωc – ωm and the upper side band is ωc + ωm.

Teacher's Note: Modulation creates frequencies wc plus wm and wc minus wm, called sidebands.

Exam Note: Write both sideband expressions.

Question 12. What is the function of a band pass filter used in a modulator for obtaining AM signal? [CBSE Ajmer 2015]

Solution.

Band pass filter rejects dc and sinusoid of frequency ωm, 2ωm and 2ωc and retain frequencies ωc ± ωm. Thus, it allows only the desired frequencies to pass through it.

Teacher's Note: The filter keeps the band around the carrier and removes unwanted components.

Exam Note: Say it passes wc plus or minus wm.

Question 13. Which basic mode of communication is used for telephonic communication? [CBSE Allahabad 2015]

Solution.

Point to point communication mode.

Teacher's Note: A telephone call links one sender with one receiver.

Exam Note: Answer point to point.

Question 14. State briefly why do the electromagnetic waves with frequency range from a few MHz upto 30 MHz can reflect back to the earth. What happens when the frequency range exceeds this limit? [CBSE Ajmer 2015]

Solution.

Ionosphere acts as reflector for the range of frequencies from few MHz to 30 MHz, hence it bends the radio waves back to the Earth. Waves of frequencies greater than 30 MHz penetrate the ionosphere and escape.

Teacher's Note: The ionosphere reflects radio waves up to a limit; higher frequencies escape.

Exam Note: Answer reflection up to 30 MHz; penetration beyond.

Question 15. Name the types of modulation in analog communication.

Solution.

There are three types of modulations in analog communication:

(i) Amplitude modulation,

(ii) Frequency modulation and

(iii) Phase modulation.

Teacher's Note: Analog modulation varies the carrier's amplitude, frequency or phase.

Exam Note: List all three types.

Question 16. What characteristic of modulated carrier wave vary in amplitude modulation?

Solution.

In amplitude modulation, the amplitude of modulated wave varies in accordance with the amplitude of information signal wave.

Teacher's Note: In AM the carrier amplitude varies with the message.

Exam Note: State amplitude varies, not frequency.

Question 17. What characteristic of modulated carrier wave vary in frequency modulation?

Solution.

In frequency modulation, the frequency of modulated wave varies in accordance with the frequency of information signal wave.

Teacher's Note: In FM the carrier frequency varies with the message while amplitude stays constant.

Exam Note: State frequency varies.

Question 18. What type of modulation is required for radio broadcast?

Solution.

Amplitude modulation as well as frequency modulation is required for radio broadcast.

Teacher's Note: Radio uses AM and FM.

Exam Note: Mention both AM and FM.

Question 19. What type of modulation is required for television broadcast?

Solution.

Frequency modulation is required for television broadcast.

Teacher's Note: TV transmission uses more than one modulation type, so the given answer is incomplete.

Exam Note: Given answer incomplete; recall video and sound modulation.

Question 20. Why is the frequency modulation preferred over amplitude modulation?

Solution.

In frequency modulation (FM) the noise is minimised, hence FM is preferred.

Teacher's Note: FM is less affected by noise, which mostly alters amplitude.

Exam Note: Say FM reduces noise.

Question 21. Why is shortwave band used for long distance radio broadcast?

Solution.

Shortwaves are reflected back by the ionosphere, hence they are used for long distance radio broadcast.

Teacher's Note: Ionospheric reflection returns short waves to Earth, so they cover long distances.

Exam Note: Say reflected by the ionosphere.

Question 22. Name the type of radio wave propagation involved when TV signals, broadcast by a tall antenna, are intercepted directly by the receiver antenna.

Solution.

Space wave propagation.

Teacher's Note: A tall antenna sends signals straight to the receiver as space waves.

Exam Note: Name space wave, line of sight.

Question 23. What is meant by modulated wave?

Solution.

The resulting wave formed by superposition of information signal over carrier wave is called the modulated wave.

Teacher's Note: A modulated wave is the carrier carrying the information signal.

Exam Note: Define as superposition of signal on carrier.

Question 24. Why high frequency carrier waves are employed for transmission?

Solution.

Since low frequency waves are easily absorbed by atmosphere, so high frequency carrier waves are employed for transmission.

Teacher's Note: High-frequency carriers allow reasonable antenna length and efficient long-distance radiation.

Exam Note: Mention antenna size and efficiency.

Question 25. Name two uses of optical transmission.

Solution.

(i) High bandwidth and

(ii) Security of signal.

Teacher's Note: Optical fibres offer huge capacity and secure transmission.

Exam Note: Name two points: bandwidth, security.

Question 26. Why is the transmission of signals through a co-axial cable not possible for frequencies greater than 20 MHz?

Solution.

At high frequency (greater than 20 MHz), the transmission lines start radiating, so transmission becomes very lossy.

Teacher's Note: Above 20 MHz coaxial cables radiate energy and become lossy.

Exam Note: Mention radiation causing loss.

Question 27. What is the purpose of modulating a signal in transmission?

Solution.

A signal is modulated to

(i) Reduce size of antenna.

(ii) Reduce larger bandwidth.

(iii) Avoid mixing up of signals.

Teacher's Note: Modulation allows practical antennas and prevents signal mixing.

Exam Note: List antenna size, avoiding mixing, bandwidth.

Question 28. What is the type of communication in which signal is discrete and binary coded version of the message (or information)?

Solution.

Digital communication.

Teacher's Note: Binary coded discrete pulses form a digital signal.

Exam Note: Answer digital communication.

Question 29. Name the type of communication systems according to the mode of the transmission.

Solution.

(i) Analog communication

(ii) Digital communication.

Teacher's Note: Communication is classed by signal nature, continuous or discrete.

Exam Note: Name analog and digital.

Question 30. Why are repeaters used in communication system?

Solution.

Repeaters are used to increase the range of a communication system.

Teacher's Note: Repeaters amplify and retransmit signals to extend range.

Exam Note: State extending range.

Question 31. Which device is used for transmitting TV signals over long distances?

Solution.

Communication satellite is used for transmitting TV signals over long distances.

Teacher's Note: TV signals pass through the ionosphere, so satellites relay them far.

Exam Note: Name communication satellite.

Question 32. How many minimum number of communication satellites are used for simultaneous world-wide communication?

Solution.

For simultaneous world-wide space communication, at least 3-communication satellites are required.

Teacher's Note: Geostationary satellites each cover part of the globe, so three suffice.

Exam Note: Write 3.

Question 33. Why do we need carrier waves of very high frequency in the modulation of signals? [HOTS]

Solution.

High frequency waves require antenna of reasonable length and can travel long distances without any appreciable power loss; so we need high frequency carrier waves.

Teacher's Note: High-frequency carriers radiate efficiently from reasonable antennas with little loss.

Exam Note: Link frequency to antenna length and range.

Question 34. Why are sky waves not used in transmission of TV signals? [HOTS]

Solution.

TV signals have high frequency range of 100 to 200 MHz. Ionospheric layers do not reflect back such high frequency signals. Hence, sky waves cannot be used for transmission of TV signals.

Teacher's Note: TV frequencies lie far above the ionosphere's reflection limit.

Exam Note: Say ionosphere does not reflect TV frequencies.

Question 35. An intelligence signal with a bandwidth of 100 kHz is to be communicated over a distance of 10 km. Suggest the form of a communication channel. [HOTS]

Solution.

The communication channel is twisted pair.

Teacher's Note: A 100 kHz signal over 10 km suits a twisted pair, which handles low frequencies over short distances.

Exam Note: Name the channel and link it to bandwidth.

Question 36. A message signal has a bandwidth of 5 MHz. Suggest a possible communication channel for its transmission. [HOTS]

Solution.

The suitable communication channel is co-axial cables.

Teacher's Note: A few MHz of bandwidth needs more capacity than twisted pair, which co-axial cable provides.

Exam Note: State co-axial cable with bandwidth reason.

Question 37. The figure given below shows the block diagram of a generalised communication system. Identify the element labelled ‘X’ and write its function. [CBSE Delhi 2014]

Solution.

InformationSourceTransmitterChannel (X)ReceiverUserMessage signal | Transmitted signal | Received signal | Message signal

X represents communication channel.

Function: It connects the transmitter to the receiver and carries the modulated wave.

Teacher's Note: The channel links transmitter and receiver and carries the signal.

Exam Note: Name channel; state it carries the signal.

Question 38. Identify the parts X and Y in the following block diagram of a generalised communication system.

Solution.

XTransmitterYReceiver

Part X is message signal or information source.

Part Y is a transmission channel.

Teacher's Note: The source gives the message; the channel carries the transmitted signal.

Exam Note: Name source and channel.

Question 39. The carrier wave is given by C(t) = 2 sin (8π t) volt. The modulating signal is a square wave as shown. Calculate modulation index.

Solution.

1−1t (second)m(t) in volt

Modulation index μ = (Amplitude of modulating signal)/(Amplitude of carrier waves) = Am/Ac = 1 V/2 V = 0.5

Teacher's Note: Modulation index is the ratio of message amplitude to carrier amplitude.

Exam Note: Read both amplitudes from the data.

Question 40. Which basic mode of communication is used in satellite communication? Which type of wave propagation is used in this mode? Write the expression for the maximum line of sight distance d between two antennas having heights h1 and h2.

Solution.

Line of sight mode is used in the satellite communication.

Space wave propagation is used.

d = √(2Rh1) + √(2Rh2), where R = radius of the earth.

Teacher's Note: Satellite links use space waves; maximum range adds the two radio horizons.

Exam Note: State mode, wave type, and formula.

Question 41. What should be the length of dipole antenna for a carrier wave of frequency 6 × 108 Hz?

Solution.

Wavelength λ = c/ν = (3 × 108)/(6 × 108) = 0.5 m

Length of dipole antenna, l = λ/4 = 0.5/4 = 0.125 m

So l = 0.125 m.

Teacher's Note: A dipole antenna is a quarter of the wavelength long.

Exam Note: Find wavelength first, then divide by four.

Class 12 Mathematics: Xam Idea Solutions for Xam Idea Solutions Class 12 Physics Chapter 15 Communication Systems Very Short Answer Questions

Download Xam Idea Solutions for Class 12

Access the complete chapter-wise PDF for Xam Idea Solutions Class 12 Physics Chapter 15 Communication Systems Very Short Answer Questions. These structured Xam Idea Solutions solutions for Class 12 Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.

Concept-Driven Math Answers

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Next Steps in Your Mathematics Revision

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these [current-page:node:field_author] Solutions for Class 12 Physics?

They are chapter-wise solved questions from the book for Class 12 Physics. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 12 Physics Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 12 Physics?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 12 Physics questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 12 Physics Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.