Xam Idea Solutions Class 12 Physics Chapter 14 Electronic Devices Short Answer Questions II

Official Textbook Solutions: Class 12 Physics Chapter 14 Electronic Devices

Explore reliable textbook solutions for Chapter 14 Electronic Devices tailored for Class 12 learners using methodologies. Utilizing these Physics answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.

Chapter-wise Solutions for Physics: Chapter 14 Electronic Devices

Navigate directly to the solved Physics textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.

Short Answer Questions II

Question 1. Distinguish between ‘intrinsic’ and ‘extrinsic’ semiconductors. [CBSE Delhi 2015, (F) 2017]

Solution.

Intrinsic semiconductor Extrinsic semiconductor

(i) It is a semiconductor in pure It is a semiconductor doped with form. trivalent or pentavalent impurity atoms.

(ii) Intrinsic charge carriers are The two concentrations are unequal electrons and holes with equal in it. There is excess of electrons in concentration. n-type and excess of holes in p- type semiconductors. (iii) Current due to charge carriers is Current due to charge carriers is feeble (of the order of µ A). significant (of the order of mA).

Teacher's Note: Intrinsic semiconductors are pure with equal carriers; extrinsic ones are doped with unequal carriers.

Exam Note: Write two contrasts: purity and carrier concentrations.

Question 2. Distinguish between an intrinsic semiconductor and a p-type semiconductor. Give reason why a p-type semiconductor crystal is electrically neutral, although nh >> ne. [CBSE (F) 2013]

Solution.

Intrinsic semiconductor Extrinsic semiconductor

(i) It is a semiconductor in pure It is a semiconductor doped with form. p-type (like Al, In) impurity.

(ii) Intrinsic charge carriers are Majority charge carriers are electrons and holes with equal holes and minority charge concentration. carriers are electrons.

(iii) Current due to charge carriers Current due to charge carriers is is feeble (of the order of µ A). significant (of the order of mA).

p-type semiconductor is electrically neutral because every atom, whether it is of pure semiconductor (Ge or Si) or of impurity (Al) is electrically neutral.

Teacher's Note: Intrinsic semiconductors are pure; p-type has acceptor doping, but acceptor atoms are neutral so the crystal stays neutral.

Exam Note: Give difference plus neutrality reason.

Question 3. How is a light emitting diode fabricated? Briefly state its working. Write any two important advantages of LEDs over the conventional incandescent low power lamps. [CBSE Bhubaneshwar 2015] OR (a) Explain briefly the process of emission of light by a Light Emitting Diode (LED). (b) Which semiconductors are preferred to make LEDs and why? (c) Give two advantages of using LEDs over conventional incandescent lamps. [CBSE South 2016]

Solution.

LED is fabricated by

(i) Heavy doping of both the p and n regions.

(ii) Providing a transparent cover so that light can come out.

Working: When the diode is forward biased, electrons are sent from n→ p and holes from p→ n. At the junction boundary, the excess minority carriers on either side of junction recombine with majority carriers. This releases energy in the form of photon hv = Eg.

GaAs (Gallium Arsenide): Band gap of semiconductors used to manufacture LED’s should be 1.8 eV to 3eV. These materials have band gap which is suitable to produce desired visible light wavelengths.

Advantages

(i) Low operational voltage and less power consumption.

(ii) Fast action and no warm-up time required.

(iii) Long life and ruggedness.

(iv) Fast on-off switching capability.

Teacher's Note: An LED is a heavily doped transparent p-n junction emitting photons of energy Eg on recombination.

Exam Note: Cover fabrication, working hv = Eg, two advantages.

Question 4. Give reasons for the following: (i) The Zener diode is fabricated by heavily doping both the p and n sides of the junction. (ii) A photodiode, when used as a detector of optical signals is operated under reverse bias. (iii) The band gap of the semiconductor used for fabrication of visible LED’s must at least be 1.8 eV. [HOTS]

Solution.

(i) Heavy doping makes the depletion region very thin. This makes the electric field of the junction very high, even for a small reverse bias voltage. This in turn helps the Zener diode to act as a ‘voltage regulator’.

(ii) When operated under reverse bias, the photodiode can detect changes in current with changes in light intensity more easily.

(iii) The photon energy, of visible light photons varies about 1.8 eV to 3 eV. Hence, for visible LED’s, the semiconductor must have a band gap of 1.8 eV.

Teacher's Note: Heavy doping thins the depletion region, reverse bias detects light changes, and visible photons need a band gap of 1.8 eV or more.

Exam Note: Answer (i) to (iii) each with its reason.

Question 5. Explain the following: (i) In the active state of the transistor, the emitter base junction acts as a low resistance while base collection region acts as high resistance. (ii) Output characteristics are controlled by the input characteristics in common emitter transistor amplifier. (iii) LEDs are made of compound semiconductor and not by elemental semiconductors. [HOTS][CBSE Sample Paper 2016]

Solution.

(i) Emitter base junction is forward biased whereas collector base junction is reverse biased.

(ii) Small change in the current IB in the base circuit controls the large current IC in the collector circuit IC = βIB

(iii) Elemental semiconductor’s band gap is such that the emitted wavelength lies in IR region. Hence cannot be used for making LED.

Teacher's Note: Emitter junction is forward biased (low resistance), collector junction reverse biased, and base current controls collector current.

Exam Note: Explain each part; use IC = beta IB.

Question 6. What are energy bands? Write any two distinguishing features between conductors, semiconductors and insulators on the basis of energy band diagrams. Draw the necessary energy band diagrams to distinguish between conductors, semiconductors and insulators. How does the change in temperature affect the behaviour of these materials? Explain briefly.

Solution.

Energy Bands: In a solid, the energy of electrons lie within certain range. The energy levels of allowed energy are in the form of bands, these bands are separated by regions of forbidden energy called band gaps. k Distinguishing features:

ConductorECEV, Eg ≃ 0ECEg < 3 eVEVSemiconductorECEg > 3 eVEVInsulator

(a) In conductors: Valence band and conduction band overlap each other.

In semiconductors: Valence band and conduction band are separated by a small energy gap.

In insulators: They are separated by a large energy gap.

(b) In conductors: Large number of free electrons are available in conduction band.

In semiconductors: A very small number of electrons are available for electrical conduction.

In insulators: Conduction band is almost empty i.e., no electron is available for conduction.

Effect of Temperature:

(i) In conductors: At high temperature, the collision of electrons become more frequent with the atoms/molecules at lattice site in the metals as a result the conductivity decreases (or resistivity increases).

(ii) In semiconductors: As the temperature of the semiconducting material increases, more electron hole pairs becomes available in the conduction band and valance band, and hence the conductivity increases or the resistivity decreases.

(iii) In insulators: The energy band between conduction band and valance band is very large, so it is unsurpassable for small temperature rise. So, there is no change in their behaviour. k

Teacher's Note: Bands are ranges of allowed energy; the gap decides the conductivity.

Exam Note: Draw all three band diagrams.

Question 7. Name the important process that occurs during the formation of a p-n junction. Explain briefly, with the help of a suitable diagram, how a p-n junction is formed. Define the term ‘barrier potential’. so

Solution.

VBpn–+–+–+Depletion region

Potential barrier: During the formation of a p-n junction the electrons diffuse from n-region to p-region and holes diffuse from p-region to n-region. This forms recombination of charge carriers. In this process immobile positive ions are collected at a junction toward n-region and negative ions at a junction toward p-region. This causes a potential difference across the unbiased junction. This is called potential barrier.

Depletion region: It is a layer formed near the junction which is devoid of free charge carriers. Its thickness is about 1 µm.

Teacher's Note: Diffusion and recombination leave a charge-free depletion layer with a built-in potential.

Exam Note: Name diffusion, draw the junction, define barrier potential.

Question 8. Explain, with the help of a circuit diagram, the working of a photo-diode. Write briefly how it is used to detect the optical signals. OR (a) How is photodiode fabricated? (b) Briefly explain its working. Draw its V–I characteristics for two different intensities of illumination. OR With what considerations in view, a photodiode is fabricated? State its working with the help of a suitable diagram. Even though the current in the forward bias is known to be more than in the reverse bias, yet the photodiode works in reverse bias. What is the reason?

Solution.

A photo-diode is fabricated using photosensitive Semiconducting material with a transparent window to allow light to fall on the junction of the diode. k Working: In diode (any type of diode), an electric field ‘E’ exists across the junction from n-side to p-side, when light with energy hν greater than energy gap Eg (hv > Eg) illuminates the junction, then electron- hole pairs are generated due to absorption of photons, in or near the depletion region of the diode. Due to existing electric field, electrons and holes get separated. The free electrons are collected on n-side and holes are collected on p-side, giving rise to an emf.

hνp-siden-sideμAR

Due to the generated emf, an electric current of µA order flows through the external resistance.

Detection of Optical Signals:

It is easier to observe the change in the current with change in the light intensity if a reverse bias is applied. Thus, photodiode can be used as a photodetector to detect optical signals. k The characteristic curves of a photodiode for two different illuminations I1 and I2 (I2 > I1) are shown.

VoltmAμAReverse biasI1I2 (I2 > I1)

Teacher's Note: A photodiode in reverse bias carries a current that changes with light intensity.

Exam Note: Draw the circuit and state the reverse-bias reason.

Question 9. Explain how the width of depletion layer in a p-n junction diode changes when the junction is (i) forward biased (ii) reverse biased.

Solution.

(i) Under forward biasing the applied potential difference causes a field which acts opposite to the potential barrier. This results in reducing the potential barrier, and hence the width of depletion layer decreases.

pnEi →← E+–

Forward current

(ii) Under reverse biasing the applied potential difference causes a field which is in the same direction as the field due to internal potential barrier. This results in an increase in barrier voltage and hence the width of depletion layer increases.

pn← EiE →–+

Reverse current

Teacher's Note: Forward bias narrows the depletion layer; reverse bias widens it.

Exam Note: State both effects with the field direction.

Question 10. Describe briefly, with the help of a diagram, the role of the two important processes involved in the formation of a p-n junction. k so

Solution.

Two important processes occurring during the formation of a p-n junction are (i) diffusion and (ii) drift.

(i) Diffusion: In n-type semiconductor, the concentration of electrons is much greater as compared to concentration of holes; while in p-type semiconductor, the concentration of holes is much greater than the concentration of electrons. When a p-n junction is formed, then due to concentration gradient, the holes diffuse from p-side to n-side (p → n) and electrons diffuse from n-side to p-side (n → p). This motion of charge carriers gives rise to diffusion current across the junction.

Electron diffusionElectron driftpn

(ii) Drift: The drift of charge carriers occurs due to electric field. Due to built in potential barrier, an electric field directed from n-region to p-region is developed across the junction. This field causes motion of electrons on p-side of the junction to n-side and motion of holes on n-side of junction to p-side. Thus a drift current starts. This current is opposite to the direction of diffusion current.

Depletion region of width wPNPotential barrier V0

Teacher's Note: Diffusion carries majority carriers across; drift of minority carriers opposes it.

Exam Note: Describe diffusion, then drift, with a diagram.

Question 11. Describe briefly using the necessary circuit diagram, the three basic processes which take place to generate the emf in a solar cell when light falls on it. Draw the I – V characteristics of a solar cell. Write two important criteria required for the selection of a material for solar cell fabrication. (i) Describe the working principle of a solar cell. Mention three basic processes involved in the generation of emf. (ii) Why are Si and GaAs preferred materials for solar cells?

Solution.

Principle: It is based on photovoltaic effect (generation of voltage due to bombardment of light photons). When solar cell is illuminated with light photons of energy (hv) greater than the energy gap (Eg) of the semiconductor, then electron-hole pairs are generated due to absorption of photons.

The three basic processes involved are: generation, separation and collection

pnBADepletion region(a)IVVOC (open circuit voltage)ISC short circuit current(b)

a. generation of electron-hole pairs due to light (with hv > Eg) close to the junction

b. Separation of electrons and holes due to electric field of the depletion region.

Electrons are swept to n-side and holes to p-side

c. the electrons reaching the n-side are collected by the front contact and holes reaching p-side are collected by the back contact. Thus, p-side becomes positive and n-side becomes negative giving rise to photo voltage.

Important criteria for the selection of a material for solar cell fabrication are: i. band gap (~1.0 to 1.8 eV), ii. high optical absorption (–104 cm–1), iii. electrical conductivity, iv. availability of the raw material, and v. cost Solar radiation has maximum intensity of photons of energy = 1.5 eV Hence semiconducting materials Si and GaAs, with band gap ≈ 1.5 eV, are preferred materials for solar cells.

Teacher's Note: A solar cell works by generation, separation and collection of carriers.

Exam Note: Name the three processes and the material criteria.

Question 12. Draw the output waveform at X, using the given inputs A and B for the logic circuit shown below. Also, identify the logic operation performed by this circuit.

Solution.

ABYX
t1t2t3t4t5t6t7ABX

X = Ȳ = A + B

The given circuit performs OR operation

Teacher's Note: A NOT gate after a NOR gate gives an OR gate.

Exam Note: X is high whenever A or B is high.

Question 13. Output characteristics of an n-p-n transistor in CE configuration is shown in the figure. Determine: (i) Dynamic output resistance (ii) Dc current gain and (iii) ac current gain at an operating point VCE = 10 V, when IB = 30 μA.

Solution.

IB = 010 μA20 μA30 μA40 μA50 μA810123.5IC (mA)VCE (V)

(i) Dynamic output resistance is given by ro = (ΔVCE/ΔIC) at constant IB. For IB = 30 μA, ΔVCE = (12 – 8) = 4 V and ΔIC = (3.6 – 3.4) = 0.2 mA. ∴ ro = 4 V/0.2 mA = 4/(0.2 × 10⁻³) = 2 × 10⁴ ohm

(ii) βdc = IC/IB. At VCE = 10 V and IB = 30 μA, the value of IC = 3.5 mA. βdc = 3.5 mA/30 μA = (3.5 × 10⁻³)/(30 × 10⁻⁶) ≈ 117

(iii) ac current gain βac = (ΔIC/ΔIB) at constant VCE. At VCE = 10 V, ΔIC = (3.5 – 2.5) mA = 1 mA and ΔIB = (30 μA – 20 μA) = 10 μA ∴ βac = 1 mA/10 μA = 100

Teacher's Note: Read changes in I_C and V_CE at fixed I_B from the curves.

Exam Note: Use the three formulas with the graph readings.

Question 14. Draw V–I characteristics of a p–n junction diode. Answer the following questions, giving reasons: (i) Why is the current under reverse bias almost independent of the applied potential upto a critical voltage? (ii) Why does the reverse current show a sudden increase at the critical voltage? Name any semiconductor device which operates under the reverse bias in the breakdown region.

Solution.

I (mA)I (μA)Forward biasReverse biasBreakdown

(i) In the reverse biasing, the current of order of µA is due to movement/drifting of minority charge carriers from one region to another through the junction.

A small applied voltage is sufficient to sweep the minority charge carriers through the junction. So, reverse current is almost independent of critical voltage.

(ii) At critical voltage (or breakdown voltage), a large number of covalent bonds break, resulting in the increase of large number of charge carriers. Hence, current increases at critical voltage.

Semiconductor device that is used in reverse biasing is zener diode. k

Teacher's Note: Reverse current is carried by minority carriers; at breakdown many bonds break.

Exam Note: Draw the curve and give both reasons.

Question 15. Answer the following question: (i) Write the functions of the three segments of a transistor. (ii) The figure shows the input waveforms A and B for 'AND' gate. Draw the output waveform and write the truth table for this logic gate.

Solution.

(i) Emitter supplies the majority charge carriers (electrons in an n-p-n transistor). Base is thin and lightly doped; it passes most of the carriers from the emitter on to the collector. Collector collects the majority carriers that cross the base.

(ii) The output of an AND gate is high only when both inputs are high. Here this happens only between t3 and t4.

t1t2t3t4t5t6t7t8ABOutput
ABY = A·B
000
010
100
111

Teacher's Note: Emitter supplies, base transmits, collector collects; AND output is high only when both inputs are high.

Exam Note: Give functions of segments and the AND truth table.

Question 16. In the circuit shown in the figure, identify the equivalent gate of the circuit and make its truth table.

Solution.

ABY

Y = Ā + B̄ = A·B (De Morgan's theorem). The equivalent gate is an AND gate.

ABĀB̄Ā + B̄Y
001110
011010
100110
110001

Teacher's Note: Apply De Morgan's theorem to the NOT-OR-NOT combination.

Exam Note: State the AND gate and show the extended table.

Question 17. The inputs A and B are inverted by using two NOT gates and their outputs are fed to the NOR gate as shown below. Analyse the action of the gates (1) and (2) and identify the logic gate of the complete circuit so obtained. Give its symbol and truth table.

Solution.

AB(1)(2)Y

Gates (1) and (2) act as NOT gates, giving Ā and B̄. The NOR gate gives Y = Ā + B̄ = A·B. The complete circuit acts as an AND gate.

ABY
ABĀB̄Y
00110
01100
10010
11001

Teacher's Note: NOT-NOT-NOR combination equals AND by De Morgan's theorem.

Exam Note: Show inverted inputs then NOR output.

Question 18. The V–I characteristic of a silicon diode is as shown in the figure. Calculate the resistance of the diode at (i) I = 15 mA and (ii) V = –10 V.

Solution.

I (mA)V (V)-10 VI = -1 μA (constant)

(i) From the straight part of the forward curve between 10 mA and 20 mA: I1 = 10 mA at V1 = 0.7 V, and I2 = 20 mA at V2 = 0.8 V. The resistance at I = 15 mA is the dynamic resistance.

rd = ΔV/ΔI = (0.8 – 0.7) V/(20 – 10) mA = 0.1 V/(10 × 10⁻³ A) = 10 Ω

(ii) At V = –10 V the characteristic is a straight line parallel to the voltage axis, with I = –1 μA. So the resistance is

R = V/I = 10 V/(1 × 10⁻⁶ A) = 10⁷ Ω

Teacher's Note: Forward: dynamic resistance from the slope; reverse: static resistance V/I.

Exam Note: Use ΔV/ΔI forward and V/I reverse.

Question 19. The current in the forward bias is known to be more (~mA) than the current in the reverse bias (~µA). What is the reason, then, to operate the photodiode in reverse bias?

Solution.

Consider the case of n-type semiconductor. The majority carrier (electron) density is larger than the minority hole density, i.e., n >> p.

On illumination, the no. of both types of carriers would equally increase in number as n' = n + ∆n, p' = p + ∆p But ∆n = ∆p and n >> p Hence, the fractional change in majority carrier, i.e, (fractional change in minority carrier) Fractional change due to photo-effects on minority carrier dominated reverse bias current is more easily measurable than the fractional change in majority carrier dominated forward bias current. Hence photodiodes are used in reverse bias condition for measuring light intensity.

Teacher's Note: Fractional change in minority carriers is far larger than in majority carriers.

Exam Note: Compare fractional changes in current under both biases.

Question 20. Answer the following question: (i) What is an 'integrated circuit (I.C.)'? Distinguish between (i) linear I.C. and (ii) Digital I.C. (ii) Identify the equivalent gate for the following circuit and write its truth table. The output of NOR gate is connected to both the inputs of NAND gate.

Solution.

(i) An integrated circuit is a single small chip of a semiconductor on which a large number of circuit components such as transistors, diodes, resistors and capacitors are fabricated and interconnected.

Linear I.C.Digital I.C.
Output varies continuously (linearly) with the input signalInput and output have only two discrete levels, 0 and 1
Used as amplifiers, e.g. an operational amplifierUsed as logic gates, memories and counters

(ii) The NAND gate with both inputs joined acts as a NOT gate, so it inverts X.

Here X = A + B, so Y = X = A + B. The equivalent gate is an OR gate.

ABXY
ABXY
0010
0101
1001
1101

Teacher's Note: NOR followed by a NOT (NAND with joined inputs) gives OR.

Exam Note: State NAND-as-NOT, then the OR table.

Question 21. (i) Write the truth table of the given gate. The inputs A and B go to an AND gate; input A and the output of the AND gate go to an OR gate, with output Y.

Solution.

ABY

Y = A + AB = A(1 + B) = A.

ABY = A + AB
000
101
010
111

Teacher's Note: Absorption law: A + AB = A.

Exam Note: Write Y = A + AB and tabulate.

Question 22. The graph of potential barrier versus width of depletion region for an unbiased diode is shown in A. In comparison to A, graphs B and C are obtained after biasing the diode in different ways. Identify the type of biasing in B & C and justify your answer.

Solution.

AV(x)xBV(x)xCV(x)x

B : Reverse biased Justification: When an external voltage V is applied across the semiconductor diode such that n-side is positive and p-side is negative, the direction of applied voltage is same as the direction of barrier potential. As a result, the barrier height increases and the depletion region widens due to the change in the electric field. The effective barrier height under reverse bias is (V0 + V).

C : Forward biased Justification: When an external voltage V is applied across a diode such that p-side is positive and n-side is negative, the direction of applied voltage (V) is opposite to the barrier potential (V0). As a result, the depletion layer width decreases and the barrier height is reduced. The effective barrier height under forward bias is (V0 – V).

Teacher's Note: Reverse bias raises the barrier (V0 + V); forward bias lowers it (V0 – V).

Exam Note: Link barrier height and width to bias polarity.

Question 23. A semiconductor has equal electron and hole concentration of 2 × 10⁸ / m³. On doping with a certain impurity, the hole concentration increases to 4 × 10¹⁰ / m³. (i) What type of semiconductor is obtained on doping? (ii) Calculate the new electron and hole concentration of the semiconductor. (iii) How does the energy gap vary with doping?

Solution.

(i) Given ne = nh = ni = 2 × 10⁸ /m³ before doping, and nh = 4 × 10¹⁰ /m³ after doping. The majority carriers are holes, so the semiconductor is p-type.

(ii) nenh = ni²

ne = ni²/nh = (2 × 10⁸)²/(4 × 10¹⁰) = 10⁶ /m³

New electron concentration = 10⁶ /m³ and hole concentration = 4 × 10¹⁰ /m³.

(iii) The energy gap decreases slightly on doping, because the donor or acceptor levels lie within the gap.

Teacher's Note: Mass-action law n_e·n_h = n_i² gives the minority concentration.

Exam Note: Use n_i² = n_e n_h.

Question 24. A p-n junction germanium diode when forward biased has a drop of 0.3 V which is assumed to be independent of current. The current in excess of 10 mA through the diode produces a large Joule-heating which damages (burns) the diode. If we want to use a 1.5 V battery to forward-bias the diode, what should be the value of resistor used in series with the diode, so that the maximum current does not exceed 6 mA?

Solution.

R1.5 VV0 = 0.3 V

The circuit equation is VB = IR + V0, so R = (VB – V0)/I.

Here VB = 1.5 V, V0 = 0.3 V and I = 6 mA = 6 × 10⁻³ A.

R = (1.5 – 0.3)/(6 × 10⁻³) = 1.2/(6 × 10⁻³) = 200 Ω

Teacher's Note: Subtract the diode drop, then apply Ohm's law for the limiting current.

Exam Note: Write V_B = IR + V_0 and substitute.

Question 25. A change of 0.2 mA in the base current causes a change of 5 mA in the collector current for a common emitter amplifier. (i) Find the ac current gain of the transistor. (ii) If the input resistance is 2 kΩ and its voltage gain is 75, calculate the load resistor used in the circuit.

Solution.

(i) ac current gain βac = ΔIC/ΔIB = 5 mA/0.2 mA = 25

(ii) Voltage gain Av = βacRL/Ri

RL = AvRi/βac = (75 × 2 × 10³)/25 = 6 × 10³ Ω = 6 kΩ

Teacher's Note: β = ΔI_C/ΔI_B and A_v = β R_L/R_i.

Exam Note: Find beta first, then R_L.

Question 26. In a silicon transistor, the base current is changed by 20 μA. This results in a change of 0.02 V in base to emitter voltage and a change of 2 mA in the collector current. (a) Find the input resistance, βac and trans conductance of the transistor. (b) This transistor is used as an amplifier in CE configuration with a load resistance 5 kΩ. What is the voltage gain of the amplifier?

Solution.

Given ΔIB = 20 μA = 0.020 mA, ΔVBE = 0.02 V and ΔIC = 2 mA.

(a) Input resistance Ri = ΔVBE/ΔIB = 0.02/(20 × 10⁻⁶) = 10³ Ω = 1 kΩ

Current gain βac = ΔIC/ΔIB = 2 mA/0.020 mA = 100

Trans-conductance gm = ΔIC/ΔVBE (at constant VCE) = (2 × 10⁻³)/0.02 = 0.1 Ω⁻¹ (siemens)

(b) RL = 5 kΩ = 5 × 10³ Ω. Voltage gain Av = βacRL/Ri = 100 × 5000/1000 = 500.

A CE amplifier causes a phase shift of 180° between input and output voltages, so Av = –500.

Teacher's Note: R_i = ΔV_BE/ΔI_B, β = ΔI_C/ΔI_B, g_m = β/R_i.

Exam Note: Evaluate each ratio, then A_v = –β R_L/R_i.

Question 27. Answer the following question: (i) Name the type of a diode whose characteristics are shown in fig (a) and (b). (ii) What does the point P in fig. (a) represent? (iii) What does the points P and Q in fig (b) represent?

Solution.

PI (mA)V (volt)(a)QPIV(b)

(i) (a) is the characteristic of a Zener diode and (b) is that of a solar cell.

(ii) P in (a) represents the Zener breakdown voltage.

(iii) P represents the open circuit voltage (VOC) and Q represents the short circuit current (ISC).

Teacher's Note: Reverse-breakdown knee is Zener voltage; solar cell intercepts are V_OC and I_SC.

Exam Note: Identify the diodes and the marked points.

Question 28. Identify the logic gate represented by the following circuit by writing its truth table. The inputs A and B are fed to an OR gate (output C) and to a NAND gate (output D); C and D are the inputs of an AND gate whose output is Y.

Solution.

ABCDY

Output of OR gate, C = A + B. Output of NAND gate, D = AB. Output of the AND gate, Y = C·D = (A + B)·AB.

ABC = A + BDY
00010
01111
10111
11100

This is the truth table of an XOR gate, so the given circuit represents an XOR gate.

Teacher's Note: OR and NAND outputs ANDed together give exclusive OR.

Exam Note: Tabulate C, D then Y.

Question 29. In the circuit shown in figure, when the input voltage of the base resistance is 10 V, VBE is zero and VCE is also zero. Find the values of IB, IC and β.

Solution.

10 VRC = 3 kΩRB = 400 kΩViCE

As VBE = 0, the potential drop across RB is 10 V (Vi – VBE = RBIB).

IB = 10/(400 × 10³) = 25 μA

Since VCE = 0, the potential drop across RC is 10 V (VCC – VCE = ICRC).

IC = 10/(3 × 10³) = 3.33 × 10⁻³ A = 3.33 mA

β = IC/IB = (3.33 × 10⁻³)/(25 × 10⁻⁶) = 1.33 × 10² = 133

Teacher's Note: Zero V_BE and V_CE put the full 10 V across R_B and R_C respectively.

Exam Note: Apply Ohm's law to the base and collector loops.

Question 30. Consider the circuit arrangement for studying input and output characteristics of an n-p-n transistor in CE configuration. Select the values of RB and RC for a transistor whose VBE = 0.7 V, so that the transistor is operating at point Q as shown in the output characteristics (IB = 30 μA). Given that the input impedance of the transistor is very small and VCC = VBB = 16 V, also find the voltage gain and power gain of the circuit making appropriate assumptions.

Solution.

Q4 mA8 VVCE (volts)IC (mA)IB = 30 μA

From the output characteristics at point Q, VCE = 8 V and IC = 4 mA. Since VCC = ICRC + VCE,

RC = (VCC – VCE)/IC = (16 – 8)/(4 × 10⁻³) = 2 kΩ

Since VBB = IBRB + VBE,

RB = (VBB – VBE)/IB = (16 – 0.7)/(30 × 10⁻⁶) = 510 kΩ

β = IC/IB = (4 × 10⁻³)/(30 × 10⁻⁶) = 133

Assuming RB is the effective input resistance, the voltage gain Av = –β(RC/RB) = –133 × (2 × 10³)/(510 × 10³) = –0.52

Power gain Ap = β × |Av| = 133 × 0.52 ≈ 69

Teacher's Note: V_CC and V_BB equations give R_C and R_B from the Q-point.

Exam Note: Use the loop equations, then A_v = –β R_C/R_B.

Xam Idea Solutions for Class 12 Mathematics: Xam Idea Solutions Class 12 Physics Chapter 14 Electronic Devices Short Answer Questions II

Download Xam Idea Solutions for Class 12

Explore reliable mathematical solutions for Xam Idea Solutions Class 12 Physics Chapter 14 Electronic Devices Short Answer Questions II tailored for Class 12 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.

Mastering Core Concepts with Xam Idea Solutions

Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.

Additional Study Materials for 2026

In addition to these Xam Idea Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.

FAQs

What are these [current-page:node:field_author] Solutions for Class 12 Physics?

They are chapter-wise solved questions from the book for Class 12 Physics. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 12 Physics Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 12 Physics?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 12 Physics questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 12 Physics Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.