Solutions for Class 12 Physics: Chapter 14 Electronic Devices
Access comprehensive textbook solutions for Chapter 14 Electronic Devices using the reference material for Class 12 Physics. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.
Practice Class 12 Physics Solutions: Chapter 14 Electronic Devices
Access the complete solution PDF for Class 12 Physics below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.
Very Short Answer Questions
Question 1. What happens to the width of depletion layer of a p-n junction when it is (i) forward biased, (ii) reverse biased? [CBSE Delhi 2011]
Solution.
(i) When forward biased, the width of depletion layer decreases.
(ii) When reverse biased, the width of depletion layer increases.
Teacher's Note: Forward bias narrows the depletion layer; reverse bias widens it.
Exam Note: State decreases and increases.
Question 2. At what temperature would an intrinsic semiconductor behave like a perfect insulator? [CBSE Delhi 2009]
Solution.
An intrinsic semiconductor behaves as a perfect insulator at temperature 0 K.
Teacher's Note: At 0 K no carriers are thermally excited, so a pure semiconductor cannot conduct.
Exam Note: Write 0 K with reason.
Question 3. How does one understand the temperature dependence of resistivity of a semiconductor? [CBSE (F) 2010]
Solution.
When temperature increases, covalent bonds of neighbouring atoms break and charge carrier become free to cause conduction, so resistivity of semi-conductor decreases with rise of temperature.
Teacher's Note: Heating breaks bonds, creating more carriers, so resistivity falls with temperature.
Exam Note: State decreases, because more carriers form.
Question 4. In a transistor, doping level in base is increased slightly. How will it affect (i) collector current and (ii) base current? [CBSE Delhi 2011]
Solution.
When doping level in base is increased slightly, (i) collector current decreases slightly and (ii) base current increases slightly.
Teacher's Note: More base doping increases recombination, so collector current falls slightly and base current rises slightly.
Exam Note: Give both effects with recombination reason.
Question 5. What happens when a forward bias is applied to a p-n junction? [CBSE Panchkula 2015]
Solution.
The direction of the applied voltage (V) is opposite to the built-in potential V0. As a result, depletion layer width decreases and the barrier height is reduced to V0 – V.
Teacher's Note: Forward bias opposes the built-in potential, lowering the barrier to V0 - V and narrowing the depletion layer.
Exam Note: Mention reduced barrier and narrower depletion layer.
Question 6. Name two semiconductor materials.
Solution.
Germanium, silicon
Teacher's Note: Silicon and germanium are common elemental semiconductors.
Exam Note: Name two correct materials.
Question 7. Name charge carriers in p-type semiconductor.
Solution.
Holes
Teacher's Note: Holes are vacancies behaving as positive carriers in p-type material.
Exam Note: One word: holes.
Question 8. Name charge carriers in n-type semiconductor.
Solution.
Free electrons.
Teacher's Note: Donor atoms supply free electrons, the majority carriers in n-type.
Exam Note: Write free electrons.
Question 9. Name fundamental logic gates.
Solution.
OR, AND and NOT gates.
Teacher's Note: Basic digital circuits are built from three fundamental gates.
Exam Note: Name OR, AND, NOT.
Question 10. What is the approximate width of depletion layer in p-n junction diode?
Solution.
The depletion layer in junction diode is of the order of micrometer (≈ 10–6 m).
Teacher's Note: The depletion layer is extremely thin, about a micrometre.
Exam Note: Write order 10^-6 m with unit.
Question 11. What is the net charge on a given piece of (i) p-type semiconductor (ii) n- type semiconductor?
Solution.
(i) Zero
(ii) Zero.
Teacher's Note: Dopant atoms and carriers balance, so any doped piece stays electrically neutral.
Exam Note: Answer zero for both; mention neutral atoms.
Question 12. Name the type of charge carriers in p-n junction diode when forward biased.
Solution.
Majority charge carriers: electrons and holes.
Teacher's Note: Under forward bias, both electrons and holes cross the junction as majority carriers.
Exam Note: Name electrons and holes.
Question 13. Name the type of charge carriers in p-n junction when reverse biased.
Solution.
Minority charge carriers: electrons and holes.
Teacher's Note: Under reverse bias only thermally generated minority carriers cross, giving tiny leakage current.
Exam Note: Name electrons and holes as minority carriers.
Question 14. What are charge carriers in p-n-p transistor?
Solution.
Holes are charge carriers in p-n-p transistor.
Teacher's Note: In a p-n-p transistor holes are the main carriers.
Exam Note: Answer holes.
Question 15. What are charge carriers in n-p-n transistor?
Solution.
Electrons are charge carriers in n-p-n transistor.
Teacher's Note: In an n-p-n transistor electrons are the main carriers.
Exam Note: Answer electrons.
Question 16. Which device is used as a voltage regulator?
Solution.
Zener diode is used as a voltage regulator.
Teacher's Note: A Zener diode in reverse breakdown holds voltage nearly constant.
Exam Note: Name Zener diode.
Question 17. In a transistor, both emitter and collector regions are of the same nature of doping. Can these regions be interchanged?
Solution.
No, the emitter and collector regions cannot be interchanged. Since these are differently doped.
Teacher's Note: Emitter and collector differ in doping level and size, so they cannot be swapped.
Exam Note: Answer no; different doping.
Question 18. Can we measure the potential difference across an unbiased p–n junction by connecting a sensitive voltmeter across it?
Solution.
No, the reason is there are no free charge carriers in the depletion region. Hence, in the absence of any external battery, there is no current flowing through the junction.
Teacher's Note: A built-in potential exists, but a voltmeter cannot measure it as no current flows.
Exam Note: Answer no with reason.
Question 19. What signal voltage is represented for positive logic state 1?
Solution.
Positive logic state 1, represents signal voltage of +5V.
Teacher's Note: In positive logic the high level represents binary 1.
Exam Note: State about +5 V.
Question 20. Name the logic gate whose repetitive use can make digital circuits.
Solution.
The repeated use of NAND or NOR gates alone can give all basic gates.
Teacher's Note: NAND and NOR are universal gates; any gate can be built from either.
Exam Note: Name NAND or NOR.
Question 21. What is the frequency of output signal of (i) Half wave rectifier (ii) Full wave rectifier, if the frequency of input signal is 50 Hz?
Solution.
For half wave rectifier, the output frequency = 50 Hz.
For full wave rectifier, the output frequency is 100 Hz.
Teacher's Note: Half wave rectifier gives one pulse per cycle; full wave gives two.
Exam Note: Give both frequencies in Hz.
Question 22. What is the order of energy gap in a semiconductor?
Solution.
The energy gap in a semiconductor is of the order of 1 eV.
Teacher's Note: Semiconductor gap is moderate, about an electron volt.
Exam Note: Write about 1 eV.
Question 23. How does the energy gap in a semiconductor vary, when doped with a pentavalent impurity?
Solution.
The energy gap decreases.
Teacher's Note: Donor levels lie near the conduction band, easing electron excitation.
Exam Note: Answer loosely; donor levels near conduction band.
Question 24. How does the conductivity of a semiconductor change with rise in temperature?
Solution.
The conductivity of a semiconductor increases with increase of temperature.
Teacher's Note: Heating creates more electron-hole pairs, so conductivity rises.
Exam Note: State increases, more carriers.
Question 25. What type of extrinsic semiconductor is formed when (i) Germanium is doped with indium? (ii) Silicon is doped with bismuth?
Solution.
(i) Indium is trivalent, so germanium doped with indium is an p-type semiconductor.
(ii) Bismuth is pentavalent, so silicon doped with bismuth is a n-type semiconductor.
Teacher's Note: Trivalent dopant gives p-type; pentavalent dopant gives n-type.
Exam Note: Identify valence first, then type.
Question 26. How is a sample of an n-type semiconductor electrically neutral though it has an excess of negative charge carriers?
Solution.
The sample contains atoms of either original material or the impurity which are all neutral.
Teacher's Note: All atoms are neutral, so excess carriers do not make the crystal charged.
Exam Note: Say all atoms are neutral.
Question 27. Give the ratio of number of holes and number of conduction electrons in an intrinsic semiconductor.
Solution.
Ratio = 1: 1.
Teacher's Note: Each broken bond gives one electron and one hole, so numbers are equal.
Exam Note: Write 1 : 1.
Question 28. In a semiconductor the concentration of electrons is 8 × 1013 cm–3 and that of holes is 5 × 1012 cm–3. Is it a p-type or n-type semiconductor?
Solution.
As concentration of electrons is more than the concentration of holes, the given extrinsic semiconductor is n-type.
Teacher's Note: More electrons than holes means donor doping, so n-type.
Exam Note: Compare concentrations; conclude n-type.
Question 29. What is the value of electrical conductivity of a semiconductor at absolute zero?
Solution.
At absolute zero, a semiconductor has no free charge carrier; hence the electrical conductivity of a semiconductor at absolute zero is zero.
Teacher's Note: At 0 K there are no free carriers, so conductivity is zero.
Exam Note: State zero, no free carriers.
Question 30. State with reason why a photodiode is usually operated at a reverse bias.
Solution.
The fractional change due to incident light on minority charge carriers in reverse bias is much more than that over the majority charge carriers in forward bias. This charge in reverse bias current is more easily measurable. So, photodiodes are used to measure the intensity in reverse bias condition.
Teacher's Note: Light changes tiny minority-carrier reverse current by a large fraction, easily measured.
Exam Note: Mention larger fractional change in reverse bias.
Question 31. State the factor, which controls (i) wavelength of light and (ii) intensity of light, emitted by a LED.
Solution.
(i) Wavelength of light emitted depends on its band energy gap.
(ii) Intensity of light emitted depends on the forward current conducted by the p–n junction.
Teacher's Note: Band gap sets LED colour; forward current sets brightness.
Exam Note: Give both factors separately.
Question 32. The energy gaps in the energy band diagrams of a conductor, semiconductor and insulator are E1, E2 and E3. Arrange them in increasing order.
Solution.
The energy gap in a conductor is zero, in a semiconductor is ≈ 1 eV and in an insulator is ≥ 3 eV.
∴ E1=0, E2 =1eV, E3 ≥ 3eV
∴ E1< E2 < E3
Teacher's Note: Gap grows from conductor to semiconductor to insulator.
Exam Note: Write order with approximate values.
Question 33. State the reason, why GaAs is most commonly used in making a solar cell.
Solution.
For solar cell, incident photon energy must be greater than band gap energy, i.e, (hv > Eg) For GaAs, Eg=1.43 eV = 1.43 eV and high optical absorption ≈ 104 cm–1, which are main criteria for fabrication of solar cells.
Teacher's Note: A solar cell needs hv above Eg and strong absorption, which suits GaAs.
Exam Note: State hv greater than Eg, suitable gap.
Question 34. Why are elemental dopants for Silicon or Germanium usually chosen from group 13 or group 15? [HOTS][NCERT Exemplar]
Solution.
The size of dopant atoms should be such as not to distort the pure semiconductor lattice structure and yet easily contribute a charge carrier on forming co-valent bonds with Si or Ge.
Teacher's Note: Group 13 and 15 atoms fit the lattice and supply a hole or electron.
Exam Note: Mention suitable size and carrier supply.
Question 35. Sn, C, Si and Ge are all group 14 elements. Yet, Sn is a conductor, C is an insulator while Si and Ge are semiconductors. Why? [HOTS] [NCERT Exemplar]
Solution.
If the valance and conduction bands overlap (no energy gap), the substance is referred as a conductor. For insulator the energy gap is large and for semiconductor the energy gap is moderate. The energy gap for Sn is 0 eV, for C is 5.4 eV, for Si is 1.1 eV and for Ge is 0.7 eV. Accordingly, their electrical conductivity varies.
Teacher's Note: Conductivity depends on the energy gap, which varies across group 14 elements.
Exam Note: Link conductivity to band gap values.
Question 36. Can the potential barrier across a p-n junction be measured by simply connecting a voltmeter across the junction? [HOTS] [NCERT Exemplar]
Solution.
No, because the voltmeter must have a resistance very high compared to the junction resistance, the latter being nearly infinite.
Teacher's Note: A voltmeter must have resistance far above the junction's, which is not feasible.
Exam Note: Answer no; resistance reason.
Question 37. In a CE transistor amplifier there is a current and voltage gain associated with the circuit. In other words there is a power gain. Considering power a measure of energy, does the circuit violate conservation of energy? [HOTS] [NCERT Exemplar]
Solution.
No, the extra power required for amplified output is obtained from the DC source.
Teacher's Note: The extra output power comes from the dc supply, so energy is conserved.
Exam Note: Answer no; power from dc source.
Question 38. Explain why elemental semiconductor cannot be used to make visible LEDs. [HOTS] [NCERT Exemplar]
Solution.
Elemental semiconductor’s band-gap is such that electromagnetic emissions are in infrared region.
Teacher's Note: Small gaps of Si and Ge give infrared photons, not visible light.
Exam Note: Say gap too small, infrared emission.
Question 39. Name the logic gates marked P and Q in the given logic circuit.
Solution.
P is NOT gate and Q is OR gate.
Teacher's Note: A NOT gate feeds one input of an OR gate.
Exam Note: Identify each gate by its symbol.
Question 40. Name the junction diode whose I–V characteristics are drawn below:
Solution.
Solar cell
[Note: The I-V characteristics of solar cell is drawn in the fourth quadrant of the coordinate axis. This is because a solar cell does not draw current but supplies the same to the load.]
Teacher's Note: A solar cell supplies current, so its curve lies in the fourth quadrant.
Exam Note: Name the device and give the quadrant reason.
Question 41. Two signals A and B are used as inputs of a NOR gate. Draw the output wave form.
Solution.
Teacher's Note: NOR output is high only when both inputs are low.
Exam Note: Check each interval for A = B = 0.
Question 42. In the following diagram, which bulb out of B₁ and B₂ will glow and why?
Solution.
Bulb B₁ will glow as diode D₁ is forward biased.
Teacher's Note: Only the forward-biased diode conducts, so only its bulb lights.
Exam Note: Name the bulb and state the biasing of D₁.
Question 43. In the following diagram ‘S’ is a semiconductor. Would you increase or decrease the value of R to keep the reading of the ammeter A constant when S is heated? Give reason for your answer.
Solution.
The value of R would be increased. On heating, the resistance of semiconductor (S) decreases.
Teacher's Note: Heating lowers the resistance of S, so R must rise to keep the current constant.
Exam Note: State increase and give the reason.
Question 44. If ni is density of intrinsic charge carriers; nh and ne are densities of hole and electrons in extrinsic semiconductor, what is the relation among them?
Solution.
ne nh = ni²
Teacher's Note: The product of electron and hole densities equals the intrinsic density squared.
Exam Note: Write nₑ nₕ = nᵢ².
Question 45. Draw a p-n junction which is reverse biased.
Solution.
The p-n junction with reverse bias is shown in figure.
Teacher's Note: In reverse bias the p side is joined to the negative terminal.
Exam Note: Join p to – and n to +.
Question 46. In the given diagram, is the diode D forward or reverse biased?
Solution.
The given diode is reverse biased.
Teacher's Note: The diode's n side faces the positive plate, so it is reverse biased.
Exam Note: State reverse bias with the connection reason.
Question 47. Define trans conductance of a transistor.
Solution.
The trans conductance of a transistor is defined as the ratio of the change in collector current to the change in base voltage at constant collector voltage.
gm = (ΔIC/ΔVB) at constant VC
Teacher's Note: It measures how much collector current changes per unit change in base voltage.
Exam Note: Give the ratio and the constant condition.
Question 48. ‘Device X’ shown here, converts the input voltage waveform into the output voltage waveform as shown in fig. Name the device X.
Solution.
The box contains the circuit of full wave rectifier.
Teacher's Note: The output has only positive half-cycles at double frequency: a full-wave rectifier.
Exam Note: Name the device and cite the waveform.
Question 49. The given inputs A and B are fed to 2-inputs NAND gate. Draw the output waveform of the gate.
Solution.
The output waveform is as shown
Teacher's Note: NAND output is low only when both inputs are high.
Exam Note: Check each interval for A = B = 1.
Free study material for Physics
Xam Idea Solutions for Class 12 Mathematics: Xam Idea Solutions Class 12 Physics Chapter 14 Electronic Devices Very Short Answer Questions
Access Class 12 Mathematics Solutions
Explore reliable mathematical solutions for Xam Idea Solutions Class 12 Physics Chapter 14 Electronic Devices Very Short Answer Questions tailored for Class 12 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.
Detailed Calculation Guides for Class 12
Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.
Next Steps in Your Mathematics Revision
Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.
FAQs
They are chapter-wise solved questions from the book for Class 12 Physics. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.