Xam Idea Solutions Class 12 Physics Chapter 14 Electronic Devices Short Answer Questions I

Step-by-Step Solutions for Class 12 Physics Chapter 14 Electronic Devices

Review structured textbook solutions for Class 12 Physics Chapter 14 Electronic Devices prepared by . Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.

Download Chapter 14 Electronic Devices Textbook Solutions PDF

Access the complete solution PDF for Class 12 Physics below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

Short Answer Questions I

Question 1. Distinguish between a metal and an insulator on the basis of energy band diagrams. [CBSE (F) 2014]

Solution.

Metal Insulators

(i) Conduction band and There is large energy gap between valence band overlap conduction band and valence band. each other.

(ii) Conduction band is Conduction band is empty. This is partially filled and valence because no electrons can be excited band is partially empty. to it from valence band.

Teacher's Note: Metals have overlapping or partly filled bands; insulators have a wide gap and empty conduction band.

Exam Note: Compare using labelled band diagrams.

Question 2. Write two characteristic features to distinguish between n-type and p-type semiconductors. [CBSE (F) 2012]

Solution.

n-type Semiconductor p-type Semiconductor

(i) It is formed by doping It is doped with trivalent pentavalent impurities. impurities.

(ii) The electrons are majority The holes are majority carriers carriers and holes are minority and electrons are minority carriers (ne >> nh). carriers (nh >> ne).

Teacher's Note: Pentavalent doping gives n-type with electron majority; trivalent gives p-type with hole majority.

Exam Note: Give dopant and majority carrier for each.

Question 3. How is forward biasing different from reverse biasing in a p-n junction diode? [CBSE Delhi 2011]

Solution.

(1) Forward Bias:

(i) Within the junction diode the direction of applied voltage is opposite to that of built-in potential.

(ii) The current is due to diffusion of majority charge carriers through the junction and is of the order of mill amperes.

(iii) The diode offers very small resistance in the forward bias.

(2) Reverse Bias:

(i) The direction of applied voltage and barrier potential is same.

(ii) The current is due to leakage of minority charge carriers through the junction and is very small of the order of

(iii) The diode offers very large resistance in reverse bias.

Teacher's Note: Forward bias narrows the depletion layer and conducts easily; reverse bias widens it.

Exam Note: Compare in a table: voltage direction, current, resistance.

Question 4. Draw energy band diagrams of an n-type and p-type semiconductor at temperature T > 0 K. Mark the donor and acceptor energy levels with their energies.

Solution.

n-type semiconductor: the donor level ED lies just below the conduction band. At T > 0 K electrons from the donor level move into the conduction band.

Conduction bandValence bandDonor level EDECEV

p-type semiconductor: the acceptor level EA lies just above the valence band. At T > 0 K electrons from the valence band move into the acceptor level, leaving holes.

Conduction bandValence bandAcceptor level EAECEV

Teacher's Note: Donor levels sit just below the conduction band; acceptor levels just above the valence band.

Exam Note: Draw both diagrams and label E_D and E_A.

Question 5. Write the truth table for the combination of the gates shown. Name the gates used.

Solution.

ABRY'SY
ABY′Y
0000
1011
0110
1111

Gate R — OR gate

Gate S — AND gate

Teacher's Note: An OR gate feeds an AND gate whose other input is A.

Exam Note: Fill Y′ = A + B first, then Y = Y′·A.

Question 6. Draw the output waveform at X, using the given inputs A, B for the logic circuit shown alongside. Also identify the gate.

Solution.

ABYX

Y = (A·B)‾ and X = Ȳ = A·B

This is AND operation. Therefore, the output is 1 when both inputs are 1. Accordingly the waveform output is shown in figure.

t1t2t3t4t5t6ABX

Teacher's Note: The second NAND acts as a NOT, so the circuit works as an AND gate.

Exam Note: Output is high only when A and B are both high.

Question 7. The output of a 2-input AND gate is fed to a NOT gate. Give the name of the combination and its logic symbol. Write down its truth table.

Solution.

Name of combination: NAND gate logic symbol.

ABY

Truth Table of NAND gate is

ABY
001
101
011
110

Teacher's Note: AND followed by NOT gives NAND.

Exam Note: Draw the symbol and the four-row table.

Question 8. Draw the logic symbol of the gate whose truth table is given below: A B Y: 0 0 1; 0 1 0; 1 0 0; 1 1 0. If this logic gate is connected to NOT gate, what will be output when (i) A = 0, B = 0 and (ii) A = 1, B = 1? Draw the logic symbol of the combination.

Solution.

The given truth table is of NOR gate. The logic symbol is shown in fig.

ABY

When it is connected to a NOT gate, the gate becomes OR gate.

(i) A = 0, B = 0 gives output 0.

(ii) A = 1, B = 1 gives output 1.

The combination is shown in fig.

ABY

Teacher's Note: A NOR gate followed by NOT acts as an OR gate.

Exam Note: Give the symbol and both outputs.

Question 9. The figure shows input waveforms A and B to a logic gate. Draw the output waveform for an OR gate. Write the truth table for this logic gate and draw its logic symbol.

Solution.

t1t2t3t4t5t6t7t8AB

Output waveform for the OR gate:

t1t2t3t4t5t6t7t8Output
ABC
000
011
101
111

OR Gate

ABY

Teacher's Note: An OR gate output is high when any input is high.

Exam Note: Combine A and B interval by interval.

Question 10. Write the truth table for the logic circuit shown below and identify the logic operation performed by this circuit.

Solution.

ABY

The logic circuit performs OR-operation.

Truth table

ABY
000
101
011
111

Teacher's Note: Two NAND gates act as NOT gates, then a NAND gate gives OR.

Exam Note: Y = A + B; give all four rows.

Question 11. Using truth tables of AND gate and NOT gate, show that NAND gate is an AND gate followed by a NOT gate. Hence write the truth table of NAND gate. Why are NAND gates called ‘Universal Gates’?

Solution.

ABOutput of AND gate and input of NOT gateOutput of NOT gate
0001
1001
0101
1110

Truth Table of NAND Gate

ABOutput of NAND gate
001
101
011
110

All primary gates like AND, NOT and OR gates can be realised by using NAND gate only. Hence, it is a universal gate.

Teacher's Note: The NOT of the AND output matches the NAND truth table exactly.

Exam Note: NAND alone can build AND, OR and NOT.

Question 12. The circuit shown in the figure has two oppositely connected ideal diodes connected in parallel. Find the current flowing through each diode in the circuit.

Solution.

D₂2 ΩD₁3 Ω4 Ω+12 V

(i) Diode D₁ is reverse biased, so it offers an infinite resistance. So no current flows in the branch of diode D₁.

(ii) Diode D₂ is forward biased, and offers no resistance in the circuit. So current in the branch of D₂ is I = V/R_eq = 12 V/(2 Ω + 4 Ω) = 2 A

Teacher's Note: Only the forward-biased diode D₂ carries current, which is 2 A.

Exam Note: Use only the branch with the forward-biased diode.

Question 13. In the given circuit diagram, a voltmeter ‘V’ is connected across a lamp ‘L’. How would (i) the brightness of the lamp and (ii) voltmeter reading ‘V’ be affected, if the value of resistance ‘R’ is decreased? Justify your answer.

Solution.

VLR+9 V

(i) If the value of the resistance R is reduced, the current in the forward biased input circuit increases. The emitter current IE and the collector current IC (= IE – IB) both increase. Hence, the brightness of the lamp increases.

(ii) Due to increase in IC, the potential drop across lamp L increases and hence the voltmeter reading V increases.

Teacher's Note: Lower R raises the base current, collector current and lamp voltage.

Exam Note: Link R to I_B, I_C and lamp brightness.

Question 14. An ac input signal of frequency 60 Hz is rectified by a (i) half wave (ii) full wave rectifier. Draw the output waveform and write the output frequency in each case.

Solution.

Input frequency = 60 HzInput waveformOutput frequency = 60 HzOutput waveform of half wave rectifierOutput frequency = 120 HzOutput waveform of full wave rectifier

Teacher's Note: Half-wave output keeps 60 Hz; full-wave output doubles it to 120 Hz.

Exam Note: Draw both outputs and write both frequencies.

Question 15. The following table gives the output of a two input logic gate. A B Y: 0 0 1; 1 0 1; 0 1 1; 1 1 0. (i) Identify the logic gate and draw its logic symbol. (ii) If the output of this gate is fed as input to a NOT gate, name the new logic gate so formed.

Solution.

(i) The truth table given represents a NAND gate.

ABY

(ii) Clearly resulting gate will be an AND gate.

ABYȲ = Z
0010
0110
1010
1101

Teacher's Note: NAND followed by NOT gives AND.

Exam Note: Name both gates and give the new table.

Question 16. The output of an OR gate is connected to both the inputs of a NAND gate. Draw the logic circuit of this combination of gates and write its truth table.

Solution.

The logic circuit is shown in fig.

ABY′ = A + BY

The logic circuit represents NOR gate. Its truth table is

ABY′Y
0001
1010
0110
1110

Teacher's Note: A NAND gate with joined inputs acts as NOT, so the circuit is NOR.

Exam Note: Y′ = A + B and Y = (A + B)‾.

Question 17. In a common emitter mode of a transistor, the d.c. current gain is 20, the emitter current is 7 mA. Calculate (i) base current and (ii) collector current.

Solution.

Given β = 20, iE = 7 mA

(i) β = iC/iB = (iE – iB)/iB ⇒ iB = iE/(β + 1) = 7 mA/(20 + 1) = 7/21 mA = 1/3 mA

(ii) iC = iE – iB = 7 – 1/3 = 20/3 mA

Teacher's Note: Use i_E = i_B + i_C and β = i_C/i_B.

Exam Note: i_B = 1/3 mA and i_C = 20/3 mA.

Question 18. A semiconductor has equal electron and hole concentration of 6 × 10⁸ / m³. On doping with certain impurity, electron concentration increases to 9 × 10¹² / m³. (i) Identify the new semiconductor obtained after doping. (ii) Calculate the new hole concentration.

Solution.

(i) The doped semiconductor is n-type.

(ii) ne nh = ni² ⇒ nh = ni²/ne = (6 × 10⁸)²/(9 × 10¹²) = 4 × 10⁴ per m³

Teacher's Note: Electrons now outnumber holes, so it is n-type; holes follow nₑnₕ = nᵢ².

Exam Note: Show nᵢ² divided by nₑ.

Question 19. Germanium and silicon junction diodes are connected in parallel. A resistance R, a 12 V battery, a milliammeter (mA) and key (K) are connected in series with them (figure). When key (K) is closed, a current begins to flow in the milliammeter. What will be the maximum reading of voltmeter connected across resistance R?

Solution.

GeSiRVmA12 VK

The potential barrier of germanium junction diode is 0.3 V and of silicon is 0.7 V. Both germanium and silicon are forward biased. Therefore, for conduction the minimum potential difference across the junction diode is 0.3 V.

Maximum reading of voltmeter connected across R = 12 – 0.3 = 11.7 V.

Teacher's Note: The germanium diode conducts first and drops 0.3 V across itself.

Exam Note: Subtract the 0.3 V barrier from 12 V.

Question 20. An X-OR gate has following truth table: A B Y: 0 0 0; 0 1 1; 1 0 1; 1 1 0. It is represented by following logic relation Y = Ā·B + A·B̄. Build this gate using AND, OR and NOT gates.

Solution.

AĀBĀ·BA·B̄YĀ·B + A·B̄

Teacher's Note: Two NOT gates and two AND gates feed an OR gate.

Exam Note: Draw Ā·B and A·B̄ ANDs joined by OR.

Question 21. A Zener of power rating 1 W is to be used as a voltage regulator. If zener has a breakdown of 5 V and it has to regulate voltage which fluctuated between 3 V and 7 V, what should be the value of Rs for safe operation (see figure)?

Solution.

RsUnregulatedvoltageRegulatedvoltage

Here, P = 1 W, Vz = 5 V, Vs = 3 V to 7 V

IZ max = P/VZ = 1/5 = 0.2 A = 200 mA

Rs = (Vs – Vz)/IZ max = (7 – 5)/0.2 = 2/0.2 = 10 Ω

Teacher's Note: The largest zener current occurs at the highest supply voltage.

Exam Note: Use the 7 V supply and 0.2 A.

Question 22. If the resistance R₁ is increased (Fig.), how will the readings of the ammeter and voltmeter change?

Solution.

AR2VR1

IB = (VBB – VBE)/R1. If R1 is increased, IB will decrease. Since Ic = βIB, it will result in decrease in Ic, i.e., decrease in ammeter and voltmeter readings.

Teacher's Note: A larger R₁ lowers the base current, so the collector current falls.

Exam Note: Link I_B to I_C = βI_B.

Question 23. If each diode in figure has a forward bias resistance of 25 Ω and infinite resistance in reverse bias, what will be the values of current I₁, I₂, I₃ and I₄?

Solution.

125 ΩABI₄125 ΩCDI₃125 ΩEFI₂G5 V25 ΩHI₁

I₃ is zero as the diode in that branch is reverse biased. Resistance in the branch AB and EF are each (125 + 25) Ω = 150 Ω.

As AB and EF are identical parallel branches, their effective resistance is 150/2 = 75 Ω.

∴ Net resistance in the circuit = (75 + 25) Ω = 100 Ω

∴ Current I₁ = 5/100 = 0.05 A

As resistances of AB and EF are equal, and I₁ = I₂ + I₃ + I₄, I₃ = 0

∴ I₂ = I₄ = 0.05/2 = 0.025 A

Teacher's Note: Only the two forward-biased branches carry current, equally.

Exam Note: I₁ = 0.05 A, I₂ = I₄ = 0.025 A, I₃ = 0.

Question 24. Three photo diodes D₁, D₂ and D₃ are made of semiconductors having band gaps of 2.5 eV, 2 eV and 3 eV, respectively. Which ones will be able to detect light of wavelength 6000 Å?

Solution.

Energy of incident light photon, E = hν = hc/λ

= (6.6 × 10⁻³⁴ × 3 × 10⁸)/(6 × 10⁻⁷ × 1.6 × 10⁻¹⁹) = 2.06 eV

For the incident radiation to be detected by the photodiode, energy of incident radiation photon should be greater than the band gap. This is true only for D₂. Therefore, only D₂ will detect this radiation.

Teacher's Note: Only a photodiode whose band gap is below 2.06 eV can respond.

Exam Note: Convert the photon energy to eV first.

Question 25. A germanium p-n junction is connected to a battery with milliammeter in series. What should be the minimum voltage of battery so that current may flow in the circuit?

Solution.

Ge p-n junctionmABattery

The potential barrier of germanium is 0.3 V, therefore to overcome this barrier the potential of battery should be equal to or more than 0.3 V.

Therefore, the minimum voltage of battery = 0.3 V.

Teacher's Note: The battery must overcome the 0.3 V barrier of germanium.

Exam Note: Quote the 0.3 V barrier.

Question 26. Name the logic gate which can be realised by using a p-n junction diode in the given diagram. Give its logic symbol and write the truth table. Name the gate which will be obtained by combining it with a NOT gate.

Solution.

D₁D₂ABY

The logic gate shown in the circuit diagram is OR gate.

ABY

Symbol of OR gate:

ABY
000
101
011
111

The gate obtained by combining OR gate with NOT gate will be NOR gate.

Teacher's Note: Two diodes with a common load resistor form an OR gate.

Exam Note: OR followed by NOT gives NOR.

Class 12 Mathematics: Xam Idea Solutions for Xam Idea Solutions Class 12 Physics Chapter 14 Electronic Devices Short Answer Questions I

Complete Math Solutions for Xam Idea Solutions Class 12 Physics Chapter 14 Electronic Devices Short Answer Questions I

Review detailed solutions for Class 12 Mathematics. The Xam Idea Solutions Class 12 Physics Chapter 14 Electronic Devices Short Answer Questions I PDF provides comprehensive answers mapped to standard Xam Idea Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.

Mastering Core Concepts with Xam Idea Solutions

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Next Steps in Your Mathematics Revision

Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.

FAQs

What are these [current-page:node:field_author] Solutions for Class 12 Physics?

They are chapter-wise solved questions from the book for Class 12 Physics. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 12 Physics Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 12 Physics?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 12 Physics questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 12 Physics Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.