Xam Idea Solutions Class 12 Micro Economics Chapter 3 Producer Behaviour And Supply R & U - Reason-Based Questions

Official Xam Idea Textbook Solutions: Class 12 Economics Chapter 03 Producer Behaviour And Supply

Review structured textbook solutions for Class 12 Economics Chapter 03 Producer Behaviour And Supply prepared by Xam Idea. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.

Chapter-wise Solutions for Economics: Chapter 03 Producer Behaviour And Supply

Navigate directly to the solved Economics textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.

R & U - Reason-Based Questions

Question 1. When AP = MP, AP is at its minimum.

Solution.

False. When AP = MP, AP is at its maximum In this case, MP curve cuts AP curve from its top.

Teacher's Note: MP pulls AP up then down, so AP peaks where they meet.

Exam Note: Mark false; AP is maximum.

Question 2. MP starts diminishing from the point of inflexion.

Solution.

True. Point of inflexion is a point from where slope of TP changes. As we know, slope of TP = MP. From this point onwards, TP increases at the diminishing rate. Therefore, MP stops increasing at this point. Or, we can say that this is a point from where MP starts diminishing.

Teacher's Note: MP is highest at the inflexion point and declines afterwards.

Exam Note: Mark true; MP is slope of TP.

Question 3. In the short run production function, factor ratio changes at different levels of output.

Solution.

True. In the short run production function, factor ratio changes at different levels of output because only one factor is variable through out the production process.

Teacher's Note: Only one factor varies, so the factor ratio changes with output.

Exam Note: Mark true; mention variable proportions.

Question 4. When marginal product decreases, total product always decreases.

Solution.

False. This is because falling marginal product implies that total product should be increasing, though at a diminishing rate. It simply implies diminishing slope of TP (total product) curve, not diminishing TP. Total product decreases only when marginal product becomes negative.

Teacher's Note: Falling MP only slows TP's growth; TP falls only when MP is negative.

Exam Note: Mark false with reason.

Question 5. When there are diminishing returns to a factor, total product increases at decreasing rate.

Solution.

. True. This is because in a situation of diminishing returns to a factor, marginal product tends to fall. Falling marginal product implies that total product should be increasing, though at a diminishing rate. It simply implies diminishing slope of TP (total product) curve.

Teacher's Note: With diminishing returns MP falls but stays positive, so TP rises more slowly.

Exam Note: Mark true.

Question 6. In the second stage of production, when MP is diminishing TP increases at increasing rate.

Solution.

False. Because, second stage of production is the stage of diminishing returns. Diminishing returns occur when MP is diminishing. Diminishing MP implies a situation when TP is increasing at a diminishing rate. Hence, in the second stage of production, when MP is diminishing TP increases at decreasing rate.

Teacher's Note: In the second stage TP still rises but at a decreasing rate.

Exam Note: Mark false; correct the statement.

Question 7. When 10% increase in all factor inputs causes 12% increase in output, it is situation of increasing returns to scale.

Solution.

True. Because, increasing returns to scale occurs when a given percentage increase in all factor inputs causes proportionately greater increase in output. Here, 10% increase in all factor inputs causes 12% increase in output, therefore, it is a situation of increasing returns to scale.

Teacher's Note: Output rising proportionately more than all inputs means increasing returns to scale.

Exam Note: Mark true; compare the percentages.

Question 8. MR = MC is a sufficient condition for producer’s equilibrium.

Solution.

False. Profits are maximised when:

(i) MR = MC, and

(ii) MC should be rising. Thus, MR = MC is a necessary condition of producer’s equilibrium, NOT a sufficient condition.

Teacher's Note: MR = MC is necessary, but MC must also be rising.

Exam Note: Mark false; give both conditions.

Question 9. A producer attains his equilibrium in the first stage of production.

Solution.

False. Because in the first stage, employment of every additional unit of the variable factor (other things remaining constant) is giving more and more marginal output (rising MP). When MP is rising, MC should be falling. So that, no producer will stop production in this stage of production.

Teacher's Note: In stage one MP rises and MC falls, so expansion still pays.

Exam Note: Mark false; MC must be rising.

Question 10. A firm sells 5 units of the output at the price of ₹ 40 per unit. The cost of producing that quantity of output is ₹ 180. The firm is earning normal profits in this situation.

Solution.

False. Normal profits occur when TR = TC.

TR (total revenue) = Price × Quantity

= ₹ 40 × 5 units

= ₹ 200

TC (total cost) = ₹ 180

Here, 200 > 180. In other words, we can say that, TR > TC. Therefore, the firm is earning abnormal profits in this situation.

Teacher's Note: Normal profit needs revenue equal to cost; compute revenue as price times quantity and compare.

Exam Note: Mark false; compare TR with TC.

Question 11. Equilibrium always refers to a situation when profits are maximised.

Solution.

False. During the short period, a firm may be incurring losses, even when:

(i) MR = MC, and

(ii) MC is rising.

Thus, equilibrium refers to a situation when profits are maximised or losses are minimised.

Teacher's Note: Equilibrium can mean maximum profit or minimum loss in the short period.

Exam Note: Mark false; mention loss minimisation.

Download Xam Idea Solutions for Class 12 Math PDF

Complete Math Solutions for Xam Idea Solutions Class 12 Micro Economics Chapter 3 Producer Behaviour And Supply R & U - Reason-Based Questions

Explore reliable mathematical solutions for Xam Idea Solutions Class 12 Micro Economics Chapter 3 Producer Behaviour And Supply R & U - Reason-Based Questions tailored for Class 12 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.

Concept-Driven Math Answers

Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.

Next Steps in Your Mathematics Revision

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these Xam Idea Solutions for Class 12 Economics?

They are chapter-wise solved questions from the Xam Idea book for Class 12 Economics. Each answer is explained step by step so you can check your work and revise.

Are the Xam Idea Class 12 Economics Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these Xam Idea solutions for Class 12 Economics?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising Xam Idea Class 12 Economics questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 12 Economics Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.