Step-by-Step Solutions for Class 12 Chemistry Chapter 08 The D–and F– Block Elements
Explore reliable textbook solutions for Chapter 08 The D–and F– Block Elements tailored for Class 12 learners using methodologies. Utilizing these Chemistry answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.
Download Chapter 08 The D–and F– Block Elements Textbook Solutions PDF
View or download the dedicated Chapter 08 The D–and F– Block Elements solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Chemistry.
Short Answer Questions I
Question 1. How would you account for the following: (a) Mn(III) undergoes disproportionation reaction easily. (b) Co(II) is easily oxidised in the presence of strong ligands. [CBSE (F) 2011]
Solution.
(a) Mn³⁺ is less stable and changes to Mn²⁺ which is more stable due to half filled d-orbital configuration. That is why, Mn³⁺ undergoes disproportionation reaction.(b) Co(II) has electronic configuration 3d⁷ 4s⁰, i.e., it has three unpaired electrons. In the presence of strong ligands, two unpaired electrons in 3d-subshell pair-up and third unpaired electron shifts to higher energy subshell from where it can be easily lost and hence oxidised to Co(III).Teacher's Note: Mn³⁺ turns into stable half-filled d⁵ Mn²⁺; strong ligands pair Co²⁺ electrons, freeing one to be lost.
Exam Note: Quote d⁵ stability and the 3d⁷ pairing.
Question 2. In the following ions: Mn³⁺, V³⁺, Cr³⁺, Ti⁴⁺ (Atomic no. : Mn = 25, V = 23, Cr = 24, Ti = 22) (i) Which ion is most stable in an aqueous solution? (ii) Which ion is the strongest oxidizing agent? (iii) Which ion is colourless? (iv) Which ion has the highest number of unpaired electrons? [CBSE (F) 2017]
Solution.
(i) Cr³⁺ because of half filled t₂g level.(ii) Mn³⁺, as the change from Mn³⁺ to Mn²⁺ results in stable half filled (d⁵) configuration.(iii) Ti⁴⁺, as Ti⁴⁺ has empty d-orbitals therefore d-d transition cannot occur in Ti⁴⁺.(iv) Mn³⁺ (3d⁴ 4s⁰). It has 4 unpaired electrons.Teacher's Note: Cr³⁺ is stable (half-filled t₂g), Mn³⁺ oxidises strongly, Ti⁴⁺ is d⁰ so colourless, and Mn³⁺ has four unpaired electrons.
Exam Note: Give one-line reason for each of four parts.
Question 3. Complete the following chemical equations: (a) 8MnO₄⁻ + 3S₂O₃²⁻ + H₂O → (b) Cr₂O₇²⁻ + 3Sn²⁺ + 14H⁺ →
Solution.
(a)MnO₄⁻ + 2H₂O + 3e⁻ → MnO₂ + 4OH⁻ ] × 8
S₂O₃²⁻ + 10OH⁻ → 2SO₄²⁻ + 5H₂O + 8e⁻ ] × 3
8MnO₄⁻ + 3S₂O₃²⁻ + H₂O → 8MnO₂ + 6SO₄²⁻ + 2OH⁻
(b)Cr₂O₇²⁻ + 14H⁺ + 6e⁻ → 2Cr³⁺ + 7H₂O
Sn²⁺ → Sn⁴⁺ + 2e⁻ ] × 3
Cr₂O₇²⁻ + 3Sn²⁺ + 14H⁺ → 2Cr³⁺ + 3Sn⁴⁺ + 7H₂O
Teacher's Note: In alkali, permanganate gains 3e⁻ to give MnO₂; dichromate takes 6e⁻ from three Sn²⁺ ions.
Exam Note: Show half-reactions, then balance electrons.
Question 4. Explain each of the following observations: (a) Actinoids exhibit a much larger number of oxidation states than the lanthanoids. (b) There is hardly any increase in atomic size with increasing atomic numbers in a series of transition metals. [CBSE (F) 2012]
Solution.
(a) This is due to small energy gap between 5f, 6d and 7s subshells in actinoids.(b) This is because with increase in atomic number in a series, the increased nuclear charge is partly cancelled by the increased shielding effect of electrons in the d-orbitals of penultimate shell.Teacher's Note: Close 5f, 6d and 7s energies give actinoids more states; d-electron shielding offsets rising nuclear charge across a series.
Exam Note: Give the energy-gap and shielding reasons.
Question 5. Complete the following equations: (a) Cr₂O₇²⁻ + 2OH⁻ → (b) MnO₄⁻ + 4H⁺ + 3e⁻ →
Solution.
(a)Cr₂O₇²⁻ + 2OH⁻ → 2CrO₄²⁻ + H₂O
(b)MnO₄⁻ + 4H⁺ + 3e⁻ → MnO₂ + 2H₂O
Teacher's Note: Alkali converts orange dichromate to yellow chromate; permanganate in acid gains three electrons to form MnO₂.
Exam Note: Balance atoms and charges on both sides.
Question 6. Write one similarity and one difference between the chemistry of lanthanoids and that of actinoids. [CBSE Allahabad 2015]
Solution.
Similarities between lanthanoids and actinoidsi. Both lanthanoids and actinoids mainly show an oxidation state of +3.
ii. Actinoids show actinoid contraction like lanthanoid contraction is exhibited by lanthanoids.
iii. Both lanthanoids and actinoids are electropositive.
(any one)
Differences between lanthanoids and actinoidsi. The members of lanthanoid exhibit less number of oxidation states than the corresponding members of actinoid series.
ii. Lanthanoid contraction is smaller than the actinoid contraction.
iii. Lanthanoids except promethium are non-radioactive metals while actinoids are radioactive metals.
(any one)
Teacher's Note: Both mainly show +3, but actinoids show more oxidation states and are radioactive.
Exam Note: State exactly one similarity and one difference.
Question 7. Explain each of the following observations: (a) Mn²⁺ is much more resistant than Fe²⁺ towards oxidation. [CBSE Delhi 2012] (b) Among lanthanoids, Ln(III) compounds are predominant. However, occasionally in solutions or in solid compounds, +2 and +4 ions are also obtained. [CBSE (AI) 2012]
Solution.
(a) Mn³⁺(d⁴) is less stable than Mn²⁺ (d⁵, half filled) while Fe³⁺ (d⁵, half filled) is more stable than Fe²⁺ (d⁴). That is why Mn²⁺ is more resistant than Fe²⁺ towards oxidation.(b) Lanthanoid metals show +2 and +4 oxidation states to attain extra stable f⁰ and f⁷ configurations.Teacher's Note: Mn²⁺ is already d⁵; Fe²⁺ gains d⁵ only by oxidising. Ln²⁺ and Ln⁴⁺ reach f⁰, f⁷ or f¹⁴.
Exam Note: Contrast Mn²⁺ and Fe²⁺ using d⁵.
Question 8. On what basis can you say that scandium (Z = 21) is a transition element but zinc (Z = 30) is not?
Solution.
On the basis of incompletely filled 3d-orbitals in case of scandium atom in its ground state (3d¹), it is regarded as a transition element. On the other hand, zinc atom has completely filled d-orbitals (3d¹⁰) in its ground state as well as in its oxidised state, hence it is not regarded as a transition element.
Teacher's Note: Sc has partly filled 3d¹; Zn is 3d¹⁰ in atom and in Zn²⁺.
Exam Note: Mention 3d¹ for Sc and 3d¹⁰ for Zn.
Question 9. Account for the following: (a) Silver atom has completely filled d-orbitals (4d¹⁰) in its ground state yet silver is a transition element. (b) Highest oxidation state of a metal exhibited in its oxide or fluoride only.
Solution.
(a) Silver (Z = 47) can exhibit +2 oxidation state wherein it will have incompletely filled d-orbitals (4d), hence a transition element.(b) Due to small size and high electronegativity, oxygen or fluorine can oxidise a metal to its highest oxidation state.Teacher's Note: Ag²⁺ has 4d⁹, so silver counts as transition; O and F are small and electronegative, stabilising top oxidation states.
Exam Note: Cite the +2 state of silver.
Question 10. Give reasons for the following: (a) The halides of transition elements become more covalent with increasing oxidation state of the metal. (b) Ionisation enthalpies of Ce, Pr and Nd are higher than Th, Pa and U.
Solution.
(a) As the oxidation state increases, size of the ion of transition element decreases. As per Fajan’s rule, as the size of metal ion decreases, covalent character of the bond formed increases.(b) It is because in the beginning, when 5f-orbitals begin to be occupied, they will penetrate less into the inner core of electrons. The 5f-electrons will therefore, be more effectively shielded from the nuclear charge than 4f-electrons of the corresponding lanthanoids. Therefore, outer electrons are less firmly held and they are available for bonding in the actinoids.Teacher's Note: Higher charge shrinks the metal ion and polarises halide more; 5f electrons are shielded better, lowering actinoid ionisation enthalpies.
Exam Note: Quote Fajans' rule for part (a).
Question 11. Transition metals can act as catalysts because these can change their oxidation state. How does Fe(III) catalyse the reaction between iodide and persulphate ions? [NCERT Exemplar]
Solution.
Reaction between iodide and persulphate ions is:
2I⁻ + S₂O₈²⁻ (Fe(III) catalyst) → I₂ + 2SO₄²⁻
Role of Fe(III) ions:
2Fe³⁺ + 2I⁻ → 2Fe²⁺ + I₂
2Fe²⁺ + S₂O₈²⁻ → 2Fe³⁺ + 2SO₄²⁻
Teacher's Note: Fe³⁺ oxidises I⁻ to I₂ and is itself reduced to Fe²⁺, which persulphate reoxidises, regenerating the catalyst.
Exam Note: Write both Fe³⁺/Fe²⁺ steps.
Question 12. (a) Calculate the magnetic moment of a divalent ion in aqueous solution if its atomic number is 25. (b) While filling up of electrons in the atomic orbitals, the 4s orbital is filled before the 3d orbital but reverse happens during the ionisation of the atom. Explain why. [NCERT Exemplar]
Solution.
(a) The divalent ion in aqueous solution will have d⁵ configuration (five unpaired electrons) with atomic number 25 (Mn²⁺). The magnetic moment, μ = √[n(n + 2)] BM = √[5(5 + 2)] BM = √35 BM = 5.92 BM.(b) n + l rule: For 3d, n + l = 3 + 2 = 5; for 4s, n + l = 4 + 0 = 4. So, electron will enter in 4s orbital. Ionisation enthalpy is responsible for the ionisation of atom, 4s electrons are loosely held by the nucleus. So, electrons are removed from 4s orbital prior to 3d.Teacher's Note: Mn²⁺ has five unpaired electrons, so μ = √35 = 5.92 BM; 4s fills first by lower n + l.
Exam Note: Show μ = √[n(n + 2)] substitution.
Question 13. How do the oxides of transition elements in lower oxidation states differ from those in higher oxidation state in the nature of metal-oxygen bonding and why?
Solution.
In the lower oxidation state the transition metal oxides are basic and they are acidic if the metal is in higher oxidation state. The oxides are amphoteric when the metal is in intermediate oxidation state. For example,
| +3 Mn₂O₃ Basic | +4 MnO₂ Amphoteric | +7 Mn₂O₇ Acidic |
Teacher's Note: Low oxidation state oxides are basic, intermediate ones amphoteric and high ones acidic, as shown by Mn₂O₃, MnO₂, Mn₂O₇.
Exam Note: Use the three manganese oxides as example.
Question 14. Give reasons for the following: (a) E° values of Mn, Ni and Zn are more negative than expected. (b) [Ti(H₂O)₆]³⁺ is coloured while [Sc(H₂O)₆]³⁺ is colourless. [HOTS]
Solution.
(a) Negative E° values for Mn²⁺ and Zn²⁺ are related to stabilities of half-filled and fully filled configurations, respectively. But for Ni²⁺, E° value is related to the highest negative enthalpy of hydration.(b) This is due to d-d transition of electron in [Ti(H₂O)₆]³⁺ complex. Ti³⁺ has one electron in d-orbital (3d¹) which absorbs energy corresponding to blue-green region and jumps from t₂g to eg set of d-orbitals (t₂g¹ eg⁰ → t₂g⁰ eg¹). But Sc³⁺ has no electron in the d-orbital.Teacher's Note: Mn²⁺ (d⁵) and Zn²⁺ (d¹⁰) are extra stable, Ni²⁺ hydrates strongly; Ti³⁺ shows d-d transition, Sc³⁺ has none.
Exam Note: Link colour to d-d transition and d¹ versus d⁰.
Question 15. Name the following: (a) A transition metal which does not exhibit variation in oxidation state in its compounds. (b) A compound where the transition metal is in the +7 oxidation state. (c) A member of the lanthanoid series which is well known to exhibit +4 oxidation state. (d) Ore used in the preparation of potassium dichromate. [CBSE Sample Paper 2016]
Solution.
(a) Scandium (Sc)(b) Potassium permanganate (KMnO₄) in which manganese shows +7 oxidation state.(c) Cerium (Ce)(d) Chromite ore (FeCr₂O₄)Teacher's Note: Scandium shows only +3, KMnO₄ has Mn(+7), cerium gives Ce⁴⁺ (f⁰), and chromite ore yields dichromate.
Exam Note: Give name and formula where asked.
Question 16. Explain the following observations: (a) Colour of KMnO₄ disappears when oxalic acid is added to its solution in acidic medium. (b) A green solution of potassium manganate turns purple when CO₂ gas is passed through the solution. [HOTS]
Solution.
(a) KMnO₄ acts as oxidising agent. It oxidises oxalic acid to CO₂ and itself changes to Mn²⁺ ion which is colourless.5C₂O₄²⁻ + 2MnO₄⁻ + 16H⁺ → 2Mn²⁺ + 8H₂O + 10CO₂
(MnO₄⁻: coloured; Mn²⁺: colourless)
CO₂ + H₂O ⇌ H₂CO₃ ⇌ H⁺ + HCO₃⁻
In the acidic medium, MnO₄²⁻ undergoes disproportionation to form ions which imparts purple colour to solution.
3MnO₄²⁻ + 4H⁺ → 2MnO₄⁻ + MnO₂ + 2H₂O
(+6 green → +7 purple + +4)
Teacher's Note: Acidified permanganate oxidises oxalate to CO₂ and becomes colourless Mn²⁺; CO₂ acidifies green manganate so it disproportionates to purple MnO₄⁻.
Exam Note: Write both ionic equations.
Question 17. Complete the following chemical reaction equations: (a) MnO₄⁻(aq) + C₂O₄²⁻(aq) + H⁺(aq) → (b) Cr₂O₇²⁻(aq) + Fe²⁺(aq) + H⁺(aq) →
Solution.
(a)MnO₄⁻ + 8H⁺ + 5e⁻ → Mn²⁺ + 4H₂O ] × 2
C₂O₄²⁻ → 2CO₂ + 2e⁻ ] × 5
2MnO₄⁻ + 5C₂O₄²⁻ + 16H⁺ → 2Mn²⁺ + 10CO₂ + 8H₂O
(b)Cr₂O₇²⁻ + 14H⁺ + 6e⁻ → 2Cr³⁺ + 7H₂O
Fe²⁺ → Fe³⁺ + e⁻ ] × 6
Cr₂O₇²⁻ + 6Fe²⁺ + 14H⁺ → 2Cr³⁺ + 6Fe³⁺ + 7H₂O
Teacher's Note: Five oxalates supply 10e⁻ to two permanganates; six Fe²⁺ supply the 6e⁻ taken by dichromate.
Exam Note: Multiply half-reactions to equalise electrons.
Free study material for Chemistry
Xam Idea Solutions for Class 12 Mathematics: Xam Idea Solutions Class 12 Chemistry Chapter 8 The D–and F– Block Elements Short Answer Questions I
Chapter-wise Xam Idea Solutions: Xam Idea Solutions Class 12 Chemistry Chapter 8 The D–and F– Block Elements Short Answer Questions I
Explore reliable mathematical solutions for Xam Idea Solutions Class 12 Chemistry Chapter 8 The D–and F– Block Elements Short Answer Questions I tailored for Class 12 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.
Mastering Core Concepts with Xam Idea Solutions
Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.
Next Steps in Your Mathematics Revision
In addition to these Xam Idea Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.
FAQs
They are chapter-wise solved questions from the book for Class 12 Chemistry. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.