Xam Idea Solutions Class 12 Chemistry Chapter 8 The D–and F– Block Elements Long Answer Questions

Official Textbook Solutions: Class 12 Chemistry Chapter 08 The D–and F– Block Elements

Review structured textbook solutions for Class 12 Chemistry Chapter 08 The D–and F– Block Elements prepared by . Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.

Chapter-wise Solutions for Chemistry: Chapter 08 The D–and F– Block Elements

Navigate directly to the solved Chemistry textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.

Long Answer Questions

Question 1. Answer the following questions:

Solution.

Q. (a) How is the variability in oxidation states of transition metals different from that of the p-block elements? (b) Out of Cu⁺ and Cu²⁺, which ion is unstable in aqueous solution and why? (c) Orange colour of Cr₂O₇²⁻ ion changes to yellow when treated with an alkali. Why?

Ans. (a) In transition elements, the oxidation states differ from each other by unity, e.g., Fe²⁺ and Fe³⁺, Cu⁺ and Cu²⁺ etc. while in p-block elements the oxidation state differ by units of two, e.g., Sn²⁺ and Sn⁴⁺, Pb²⁺ and Pb⁴⁺, etc. In transition elements the higher oxidation states are more stable for heavier elements in a group, e.g., Mo(VI) and W(VI) are more stable than Cr(VI) in group 6 whereas in p-block elements the lower oxidation states are more stable for heavier elements due to the inert pair effect, e.g., Pb(II) is more stable than Pb(IV) in group 14.

(b) Cu⁺ is unstable in aqueous solutions. This is because in aqueous solution Cu⁺ undergoes disproportionation to form a more stable Cu²⁺ ion.

2Cu⁺(aq) → Cu²⁺(aq) + Cu(s)

The higher stability of Cu²⁺ ion in aqueous solution may be attributed to its greater negative ΔHydH° than that of Cu⁺. It compensates the second ionisation enthalpy of Cu involved in the formation of Cu²⁺ ions.

(c) This is due to formation of chromate ion which is yellow in colour.

Cr₂O₇²⁻ + 2OH⁻ → 2CrO₄²⁻ + H₂O
Dichromate ion (orange) → Chromate ion (yellow)

Q. Chemistry of actinoids is complicated as compared to lanthanoids. Give two reasons. [CBSE Delhi 2017]

Ans. This is because of the following reasons:

a. Actinoids are radioactive.

b. Actinoids show wide range of oxidation states as energy difference between 5f, 6d and 7s subshells of the actinoids is small.

Teacher's Note: Cu⁺ disproportionates to Cu²⁺ and Cu because Cu²⁺ has more negative hydration enthalpy; alkali shifts dichromate to chromate.

Exam Note: Give the disproportionation and chromate equations.

Question 2. (i) Account for the following: a. Transition metals form large number of complex compounds. b. The lowest oxide of transition metal is basic whereas the highest oxide is amphoteric or acidic. c. E° value for the Mn³⁺/Mn²⁺ couple is highly positive (+ 1.57 V) as compared to Cr³⁺/Cr²⁺. (ii) Write one similarity and one difference between the chemistry of lanthanoid and actinoid elements. [CBSE Delhi 2017]

Solution.

i. (a) The tendency to form complex compounds is due to:

— Small size and high charge on metal ion.

— The availability of d orbitals for accommodating electrons donated by the ligand.

(b) In low oxidation state of the metal, some of the valence electrons of the metal atom are not involved in bonding. Hence, it can donate electrons and behave as a base. On the other hand, in higher oxidation state of the metal, valence electrons are involved in bonding and are not available. Instead effective nuclear charge is high and hence it can accept electrons and behave as an acid.

(c) Much large third ionisation energy of Mn (where the required change is stable half filled d⁵ to d⁴) is mainly responsible for this.

ii. Similarities

— Both show mainly an oxidation state of +3.

— Actinoids show actinoid contraction like lanthanoid contraction is shown by lanthanoids.

— Both are electropositive and very reactive.

(Any one)

Differences

— Except promethium (Pm) lanthanoids are non-radioactive whereas actinoids are radioactive.

— Lanthanoids do not form oxocation whereas actinoids form oxocation, e.g., UO₂²⁺, PuO₂²⁺, etc.

— Lanthanoids have less tendency towards complex formation whereas actinoids have greater tendency towards complex formation.

(Any one)

Teacher's Note: Small, highly charged ions with vacant d orbitals form complexes; Mn³⁺ to d⁵ Mn²⁺ makes E° high.

Exam Note: Give one similarity and one difference.

Question 3. (i) Account for the following: a. Transition metals show variable oxidation states. b. Zn, Cd and Hg are soft metals. c. E° value for the Mn³⁺/Mn²⁺ couple is highly positive (+ 1.57 V) as compared to Cr³⁺/Cr²⁺.

Solution.

i. (a) Transition elements show variable oxidation states because electrons in ns and (n – 1) d-orbitals are available for bond formation as they have nearly same energy.

(b) Zn, Cd and Hg have fully filled d-orbitals. Absence of unpaired electrons cause weak metallic bonding. Hence, they are soft.

(c) Much large third ionisation energy of Mn (where the required change is stable half filled d⁵ to d⁴) is mainly responsible for this.

Teacher's Note: Zn, Cd and Hg have no unpaired d electrons, so their metallic bonds are weak and the metals soft.

Exam Note: State all three reasons in one line each.

Question 4. (i) Complete and balance the following chemical equations: a. Cr₂O₇²⁻ + I⁻ + H⁺ → b. MnO₄⁻ + SO₃²⁻ + H⁺ → (ii) Explain the following observations: a. Transition elements and their compounds are known to act as catalysts. b. The higher oxidation states are usually exhibited by the members in the middle of a series of transition elements. c. The metal-metal bonding is more frequently found with the second and third series of transition elements. [CBSE (F) 2012]

Solution.

i. (a)

Cr₂O₇²⁻ + 14H⁺ + 6e⁻ → 2Cr³⁺ + 7H₂O

2I⁻ → I₂ + 2e⁻   ] × 3

Cr₂O₇²⁻ + 6I⁻ + 14H⁺ → 2Cr³⁺ + 3I₂ + 7H₂O

(b)

MnO₄⁻ + 8H⁺ + 5e⁻ → Mn²⁺ + 4H₂O   ] × 2

SO₃²⁻ + H₂O → SO₄²⁻ + 2H⁺ + 2e⁻   ] × 5

2MnO₄⁻ + 5SO₃²⁻ + 6H⁺ → 2Mn²⁺ + 5SO₄²⁻ + 3H₂O

ii. (a) The catalytic activity of transition metals and their compounds is attributed to the following reasons:

  • Due to their tendency to show variable oxidation states transition metals form unstable intermediate compounds and provide a new path for the reaction with lower activation energy.
  • In some cases, the transition metals provide a suitable large surface area with free valencies on which reactants are adsorbed.

(b) It is due to greater number of unpaired electrons in (n–1)d and ns orbitals at the middle of the series.

(c) In the same group of d-block elements, the 4d and 5d transition elements are larger in size than those of corresponding 3d elements. Hence, the valence electrons are less tightly held and form metal–metal bond more frequently.

Teacher's Note: Dichromate oxidises iodide to iodine (6 electrons), permanganate oxidises sulphite to sulphate (5 electrons); balance electrons before adding water.

Exam Note: Show half-reactions and the final balanced equation.

Question 5. Answer the following questions:

Solution.

Q. Name the element of 3d transition series which shows maximum number of oxidation states. Why does it show so?

Ans. Manganese (3d⁵ 4s²) shows maximum number of oxidation states as its atoms have 5 unpaired electrons in 3d orbitals. It shows all the oxidation states from +2 to +7.

Q. Which transition metal of 3d series has positive E°(M²⁺/M) value and why?

Ans. Copper has positive E° (M²⁺/M) value, as high energy (ΔaH + ΔiH) to transform Cu(s) to Cu²⁺(aq) is not balanced by hydration enthalpy.

Q. Out of Cr³⁺ and Mn³⁺, which is a stronger oxidising agent and why?

Ans. Mn³⁺ is stronger oxidising agent as the change from Mn³⁺ to Mn²⁺ results in half filled, d⁵ configuration which has extra stability.

Teacher's Note: Manganese, with five unpaired 3d electrons, shows +2 to +7; copper hydration cannot repay atomisation and ionisation; Mn³⁺ gains d⁵.

Exam Note: Name Mn, Cu and Mn³⁺ with reasons.

Question 6. Answer the following questions:

Solution.

Q. Why do transition elements show variable oxidation states? a. Name the element showing maximum number of oxidation states among the first series of transition metals from Sc (Z = 21) to Zn (Z = 30). b. Name the element which shows only +3 oxidation state.

Ans. Transition elements show variable oxidation states because electrons in ns and (n – 1) d-orbitals are available for bond formation as they have nearly same energy.

a. Manganese

b. Scandium

Q. What is lanthanoid contraction? Name an important alloy which contains some of the lanthanoid metals. [CBSE (AI) 2013]

Ans. The steady decrease in the atomic and ionic radii (having the same charge) with increase in atomic number as we move across the series from lanthanum to lutetium is known as lanthanoid contraction.

Misch metal.

Teacher's Note: Close ns and (n-1)d energies give variable states; scandium shows only +3; misch metal is the lanthanoid alloy.

Exam Note: Define lanthanoid contraction; name misch metal.

Question 7. Answer the following questions:

Solution.

Q. How do you prepare: a. K₂MnO₄ from MnO₂? b. Na₂Cr₂O₇ from Na₂CrO₄?

Ans. (a) Pyrolusite is fused with KOH in the presence of atmospheric oxygen to give K₂MnO₄.

2MnO₂ + 4KOH + O₂ → 2K₂MnO₄ + 2H₂O  (heat)
Pyrolusite → Potassium manganate

(b) Na₂CrO₄ is extracted with water and acidified with H₂SO₄ to give Na₂Cr₂O₇.

2Na₂CrO₄ + H₂SO₄ → Na₂Cr₂O₇ + Na₂SO₄ + H₂O
Sodium chromate → Sodium dichromate

Q. Account for the following: a. Mn²⁺ is more stable than Fe²⁺ towards oxidation to +3 state. b. The enthalpy of atomisation is lowest for Zn in 3d series of the transition elements. c. Actinoid elements show wide range of oxidation states. [CBSE Delhi 2014]

Ans. (a) The electronic configuration of Mn²⁺ is [Ar] 3d⁵ which is half-filled and hence stable. So Mn²⁺ cannot lose third electron easily. On the other hand, Fe²⁺ has electronic configuration [Ar] 3d⁶. It tends to lose one electron to acquire stable [Ar] 3d⁵ electronic configuration. Hence Mn²⁺ is more stable than Fe²⁺ towards oxidation.

(b) In the formation of metallic bonds, no electrons from 3d-orbitals are involved in case of zinc, while in all other metals of the 3d series, electrons from the d-orbitals are always involved in the formation of metallic bonds. That is why, the enthalpy of atomisation of zinc is the lowest in the series.

(c) This is due to comparable energies of 5f, 6d and 7s orbitals.

Teacher's Note: Pyrolusite fused with KOH and air gives green manganate; chromate with acid gives dichromate; Mn²⁺ is stable half-filled d⁵.

Exam Note: Write both preparation equations with conditions.

Question 8. Answer the following questions:

Solution.

Q. With reference to structural variability and chemical reactivity, write the differences between lanthanoids and actinoids.

S.No.LanthanoidsActinoids
(i)Atomic or ionic radii does not show much variation.Atomic or ionic radii shows much variation.
(ii)Besides +3 oxidation state, they show +2 and +4 oxidation states in few cases.Besides +3 oxidation states, they show higher oxidation states of +4, +5, +6, +7 also.

Q. Name a member of the lanthanoid series which is well known to exhibit +4 oxidation state.

Ans. Cerium, Ce ([Xe] 4f² 5d⁰ 6s²). Formation of Ce⁴⁺ is favoured by its noble gas configuration ([Xe] 4f⁰ 5d⁰ 6s⁰).

Q. Complete the following equation: MnO₄⁻ + 8H⁺ + 5e⁻ →

MnO₄⁻ + 8H⁺ + 5e⁻ → Mn²⁺ + 4H₂O

Q. Out of Mn³⁺ and Cr³⁺, which is more paramagnetic and why? (Atomic nos.: Mn = 25, Cr = 24) [CBSE (AI) 2014]

Ans. Mn³⁺(3d⁴ 4s⁰) has 4 unpaired electrons while Cr³⁺(3d³ 4s⁰) has 3 unpaired electrons, therefore, Mn³⁺ is more paramagnetic than Cr³⁺.

Teacher's Note: Actinoids vary more in size and states; Ce⁴⁺ is 4f⁰; Mn³⁺ has four unpaired electrons, Cr³⁺ three.

Exam Note: Tabulate two differences; count unpaired electrons.

Question 9. (i) Account for the following: a. Transition metals form coloured compounds. b. Cr²⁺ is a strong reducing agent. c. Actinoids show irregularities in their electronic configurations. (ii) Define lanthanoid contraction. Write the common oxidation state of lanthanoids. [CBSE Chennai 2015]

Solution.

i. (a) This is due to d-d transition. Under the influence of the ligand attached, the d-orbitals in a transition metal complex split in two sets of orbitals having slightly different energies. When white light falls on these complexes they absorb a particular colour from the white light for the promotion of electrons and remaining colours are emitted. The colour of the complex is due to this emitted radiations.

(b) Cr²⁺ is a strong reducing agent because after the loss of one electron Cr²⁺ becomes Cr³⁺ which has more stable t₂g³ (half-filled) configuration in a medium like water.

(c) The irregularities in the electronic configuration of the actinoids is due to stability of the f⁰, f⁷ and f¹⁴ occupancies of the 5f-orbitals.

ii. The overall decrease in atomic and ionic radii from lanthanum to lutetium, due to poor shielding effect of 4f electrons is called lanthanoid contraction. The common oxidation state of lanthanoids is +3.

Teacher's Note: Colour arises from d-d transitions; Cr²⁺ becomes stable t₂g³ Cr³⁺; actinoid irregularities come from f⁰, f⁷, f¹⁴ stability.

Exam Note: Explain d-d transition for colour.

Question 10. Account for the following: a. Zr and Hf have almost similar atomic radii. b. MnO is basic whereas Mn₂O₇ is acidic in nature. Why? c. E° value for the Mn³⁺/Mn²⁺ couple is positive (+ 1.5 V) whereas that of Cr³⁺/Cr²⁺ is negative (–0.4 V). Why? d. Zn has lowest enthalpy of atomisation in 3d series. e. The chemistry of actinoids is more complicated as compared to lanthanoids. [CBSE Chennai 2015]

Solution.

a. This is due to filling of 4f orbitals which have poor shielding effect (Lanthanoid contraction).

b. The oxide in the lower oxidation state of a metal is basic and in the higher oxidation state of the metal it is acidic. That is why Mn²⁺O is basic whereas Mn₂⁷⁺O₇ is acidic.

c. The positive E° value for the couple Mn³⁺/Mn²⁺ is due to much higher third ionisation enthalpy of Mn, where the change is d⁵ (extra stable) to d⁴. As Cr³⁺ (t₂g³) is more stable than Cr²⁺, therefore, E° value for the couple Cr³⁺/Cr²⁺ is negative.

d. Because in the formation of metallic bonds no electron from 3d orbitals are involved in case of zinc as it has completely filled d-orbitals (3d¹⁰ 4s²), while in all other metals of 3d series electrons from the d-orbitals are always involved in the formation of metallic bonds.

e. Because actinoids are radioactive and exhibit wide range of oxidation states.

Teacher's Note: MnO (+2) is basic and Mn₂O₇ (+7) is acidic; Mn³⁺ to d⁵ raises E°; Cr³⁺ is stable t₂g³.

Exam Note: Link oxide acidity to oxidation state.

Question 11. Answer the following questions: The elements of 3d transition series are given as: Sc Ti V Cr Mn Fe Co Ni Cu Zn. Answer the following: a. Which element has the highest m.p. and why? b. Which element is a strong oxidising agent in +3 oxidation state and why? c. Which element is soft and why? Also write the equations involved in the preparation of potassium dichromate from sodium chromate (Na₂CrO₄). [CBSE (F) 2016]

Solution.

a. Cr, the highest melting point of Cr is attributed to the involvement of greater number of electrons (5) from 3d in addition to 4s electrons in interatomic metallic bonding.

b. Mn, because the change from Mn³⁺ (d⁴) to Mn²⁺ (d⁵) results in the half filled configuration which has extra stability.

c. Zn, in Zn (3d¹⁰ 4s²) all the electrons present in d-orbitals are paired and hence metallic bonds present in it are weak. That is why, it is soft.

Q. Write the equations involved in the preparation of potassium dichromate from sodium chromate (Na₂CrO₄).

Ans. Sodium chromate is acidified with sulphuric acid to give a solution from which orange sodium dichromate, Na₂Cr₂O₇·2H₂O can be crystallised.

2Na₂CrO₄ + 2H⁺ → Na₂Cr₂O₇ + 2Na⁺ + H₂O

Sodium dichromate is more soluble than potassium dichromate. The latter is therefore, prepared by treating the solution of sodium dichromate with potassium chloride.

Na₂Cr₂O₇ + 2KCl → K₂Cr₂O₇ + 2NaCl

Teacher's Note: Chromium melts highest using five 3d electrons in bonding; Mn³⁺ oxidises; zinc is soft; acidify chromate, then add KCl.

Exam Note: Give two equations for K₂Cr₂O₇ preparation.

Question 12. Give reasons for the following:

Solution.

Q. Transition metals have high enthalpies of atomisation.

Ans. Because of large number of unpaired electrons in their atoms, the transition metals have strong interatomic interactions and hence stronger bonding between atoms, resulting in higher enthalpies of atomisation.

Q. Among the lanthanoids, Ce(III) is easily oxidised to Ce(IV).

Ans. Because Ce(IV) has extra stability due to empty f⁰ orbital.

Ce³⁺ → Ce⁴⁺ + e⁻
[Xe] 4f¹ 5d⁰ 6s⁰     [Xe] 4f⁰ 5d⁰ 6s⁰

Q. Fe³⁺ | Fe²⁺ redox couple has less positive electrode potential than Mn³⁺ | Mn²⁺ couple.

Ans. In Mn²⁺, d⁵ configuration leads to extra stability of half-filled configuration, so Mn³⁺ (d⁴) tends to get converted to stable d⁵ configuration of Mn²⁺, by accepting an electron so Mn³⁺/Mn²⁺ redox couple has more positive potential than Fe³⁺(d⁵)/Fe²⁺(d⁶) couple.

Q. Copper(I) has d¹⁰ configuration, while copper(II) has d⁹ configuration, still copper(II) is more stable in aqueous solution than copper(I).

Ans. Due to more negative enthalpy of hydration of Cu²⁺(aq) than Cu⁺(aq) which compensates for second ionisation enthalpy of copper.

Q. The second and third transition series elements have almost similar atomic radii.

Ans. In the third transition series after lanthanum there is lanthanoid contraction, due to ineffective shielding by intervening 4f-orbital electrons and hence second and third transition series elements have similar atomic radii.

Teacher's Note: Unpaired d electrons give high atomisation enthalpy; Ce⁴⁺ is 4f⁰; Mn³⁺ gains d⁵ while Fe³⁺ is already d⁵.

Exam Note: Use d⁵ and d⁰ stability arguments.

Question 13. Answer the following questions:

Solution.

Q. Assign reasons for the following: a. In the series Sc (Z = 21) to Zn (Z = 30), the enthalpy of atomisation of Zn is the lowest. b. Zr and Hf have almost identical radii. c. Transition metals show variable oxidation states. d. The E°(M²⁺/M) value for copper is positive (+ 0.34 V).

a. In the formation of metallic bonds, no electrons from 3d-orbitals are involved in case of zinc, while in all other metals of the 3d series, electrons from the d-orbitals are always involved in the formation of metallic bonds. That is why, the enthalpy of atomisation of zinc is the lowest in the series.

b. This is due to filling of 4f orbitals which have poor shielding effect (lanthanoid contraction).

c. Transition elements show variable oxidation states because electrons in ns and (n – 1) d-orbitals are available for bond formation as they have nearly same energy.

d. This is because the sum of enthalpies of sublimation and ionisation is not balanced by hydration enthalpy.

Q. Although +3 oxidation state is the characteristic oxidation state of lanthanoids but cerium shows +4 oxidation state also. Why? [NCERT Exemplar]

Ans. It is because after losing one more electron Ce acquires stable 4f⁰ electronic configuration.

Teacher's Note: Zinc uses no 3d electrons in bonding; poor 4f shielding equalises Zr and Hf; copper hydration cannot offset atomisation.

Exam Note: Answer all four parts briefly, then cerium.

Question 14. Answer the following questions:

Solution.

Q. In the titration of FeSO₄ with KMnO₄ in the acidic medium, why is dil. H₂SO₄ used instead of dil. HCl?

Ans. Dil. H₂SO₄ does not oxidise or reduce KMnO₄; it only supplies the H⁺ ions needed for the reaction. Dil. HCl is a reducing agent and liberates chlorine on reacting with KMnO₄ solution. Hence, the part of the oxygen produced from KMnO₄ is used up by HCl.

Q. Give reasons: a. Among transition metals, the highest oxidation state is exhibited in oxoanions of a metal. b. Ce⁴⁺ is used as an oxidising agent in volumetric analysis. c. Zn²⁺ salts are white while Cu²⁺ salts are blue.

Ans. a. In these oxoanions the oxygen atoms are directly bonded to the transition metal. Since oxygen is highly electronegative, the oxoanions bring out the highest oxidation state of the metal.

b. Ce⁴⁺ has the tendency to attain +3 oxidation state which is more stable and so it is used as an oxidising agent in volumetric analysis.

c. Zn²⁺ ion has all its orbitals completely filled whereas in Cu²⁺ ion there is one half-filled 3d-orbital. Therefore, due to d-d transition Cu²⁺ has a tendency to form coloured salts whereas Zn²⁺ has no such tendency.

Teacher's Note: Dilute HCl would be oxidised to chlorine by permanganate, wasting oxidant; sulphuric acid is not attacked and supplies H⁺.

Exam Note: State HCl is oxidised, H₂SO₄ is not.

Question 15. How would you account for the following:

Solution.

Q. There is a gradual decrease in the atomic sizes of transition elements in a series with increasing atomic numbers.

Ans. There is a gradual decrease in the atomic sizes of transition elements in a series with increasing atomic numbers due to poor shielding effect of d-electrons, the net electrostatic attraction between the nucleus and the outermost electrons increases.

Q. The atomic radii of the metals of the third (5d) series of transition elements are virtually the same as those of the corresponding members of the second (4d) series.

Ans. This is due to filling of 4f-orbitals which have poor shielding effect (lanthanide contraction).

Q. The E° value for the Mn³⁺/Mn²⁺ couple is much more positive than that for Cr³⁺/Cr²⁺ couple or Fe³⁺/Fe²⁺ couple.

Ans. The E° value for the Mn³⁺/Mn²⁺ couple is much more positive than Cr³⁺/Cr²⁺ couple or Fe³⁺/Fe²⁺ couple because Mn³⁺ ion receiving an electron gets d-subshell half-filled which is highly stable, while in case of Fe³⁺, d-subshell is already half-filled, so it does not receive electron easily.

Q. The transition elements have great tendency for complex formation.

Ans. The transition elements have great tendency for complex formation due to presence of vacant d-orbitals of suitable energy, small size of cations and higher nuclear charge.

Q. Although Zr belongs to 4d and Hf belongs to 5d transition series but it is quite difficult to separate them.

Ans. Due to lanthanoid contraction, they have almost same size (Zr = 160 pm) and (Hf = 159 pm).

Teacher's Note: Poor d shielding shrinks atoms across a series; lanthanoid contraction makes Zr (160 pm) and Hf (159 pm) alike.

Exam Note: Quote poor d shielding and the Zr-Hf radii.

Question 16. On the basis of lanthanoid contraction, explain the following:

Solution.

Q. Nature of bonding in La₂O₃ and Lu₂O₃.

Ans. As the size decreases covalent character increases. Therefore, La₂O₃ is more ionic and Lu₂O₃ is more covalent.

Q. Trends in the stability of oxo salts of lanthanoids from La to Lu.

Ans. As the size decreases from La to Lu, stability of oxosalts also decreases.

Q. Stability of the complexes of lanthanoids.

Ans. Stability of the complexes increases as the size of lanthanoids decreases.

Q. Radii of 4d and 5d block elements.

Ans. Radii of 4d and 5d block elements will be almost same.

Q. Trends in acidic character of lanthanoid oxides. [NCERT Exemplar]

Ans. Acidic character of oxides increases from La to Lu.

Teacher's Note: Shrinking size from La to Lu raises covalency and complex stability, lowers oxosalt stability, and makes oxides more acidic.

Exam Note: Give the direction of each trend.

Question 17. Assign reasons for the following:

Solution.

Q. The enthalpies of atomisation of transition elements are high.

Ans. This is because transition metals have strong metallic bonds as they have a large number of unpaired electrons.

Q. The transition metals and many of their compounds act as good catalysts.

Ans. The catalytic activity of transition metals is attributed to the following reasons:

a. Because of their variable oxidation states, transition metals form unstable intermediate compounds and provide a new path with lower activation energy for the reaction.

b. In some cases, the transition metal provides a suitable large surface area with free valencies on which reactants are adsorbed.

Q. From element to element, the actinoid contraction is greater than the lanthanoid contraction.

Ans. This is due to poorer shielding by 5f-electrons in actinoids than that by 4f-electrons in the lanthanoids.

Q. The E° value for the Mn³⁺/Mn²⁺ couple is much more positive than that of Cr³⁺/Cr²⁺.

Ans. This is due to much larger third ionisation energy of Mn as Mn²⁺ is very stable on account of stable d⁵ configuration.

Q. Scandium (Z = 21) does not exhibit variable oxidation states and yet it is regarded as a transition element.

Ans. This is because scandium has partially filled d-orbitals in the ground state (3d¹ 4s²).

Teacher's Note: Catalysis uses variable states and adsorption surfaces; 5f electrons shield worse than 4f; scandium has a 3d¹ ground state.

Exam Note: Give two catalysis reasons: intermediates and adsorption.

Question 18. Answer the following questions:

Solution.

Q. Compare non transition and transition elements on the basis of their a. Variability of oxidation states b. Stability of oxidation states.

Ans. a. Oxidation states of transition elements differ from each other by unity. In non-transition elements oxidation states normally differ by a unit of two.

b. In transition elements higher oxidation states are favoured by heavier elements whereas in non-transition elements lower oxidation state is favoured by heavier elements.

Q. Give chemical reactions for the following observations: a. Potassium permanganate is a good oxidising agent in basic medium. b. Inter convertibility of chromate ion and dichromate ion in aqueous solution depends upon pH of the solution. c. Potassium permanganate is thermally unstable at 513 K. [CBSE Sample Paper 2013]

Ans. a.

MnO₄⁻ + 2H₂O + 3e⁻ → MnO₂ + 4OH⁻   ] × 2

I⁻ + 6OH⁻ → IO₃⁻ + 3H₂O + 6e⁻

2MnO₄⁻ + I⁻ + H₂O → 2MnO₂ + IO₃⁻ + 2OH⁻

b.

2CrO₄²⁻ + 2H⁺ ⇌ Cr₂O₇²⁻ + H₂O
(acidic, pH less than 7: forward; alkaline, pH more than 7: backward)

c.

2KMnO₄ → K₂MnO₄ + MnO₂ + O₂  (513 K)

Teacher's Note: Permanganate in basic medium gives MnO₂ and oxidises iodide to iodate; pH shifts chromate and dichromate; heating gives K₂MnO₄.

Exam Note: Write all three equations, balanced and with conditions.

Question 19. Answer the following questions:

Solution.

Q. Write balanced equations to represent what happens when a. Cu²⁺ is treated with KI. b. Acidified potassium dichromate solution is reacted with iron (II) solution. (ionic equation)

Ans. a.

2Cu²⁺ + 4I⁻ → Cu₂I₂ + I₂

b.

Cr₂O₇²⁻ + 14H⁺ + 6e⁻ → 2Cr³⁺ + 7H₂O

Fe²⁺ → Fe³⁺ + e⁻   ] × 6

Cr₂O₇²⁻ + 6Fe²⁺ + 14H⁺ → 2Cr³⁺ + 6Fe³⁺ + 7H₂O

Q. (a) The figure given alongside illustrates the first ionization enthalpies of first, second and third series of transition elements. Which series amongst the first, second and third series of transition elements have the highest first ionization enthalpy and why? (b) Separation of lanthanoid elements is difficult. Explain. (c) Sm²⁺, Eu²⁺ and Yb²⁺ ions in solutions are good reducing agents but an aqueous solution of Ce⁴⁺ is a good oxidising agent. Why? [CBSE Sample Paper 2015]

900800700TiVCrMnFeCoNiCuZrNbMoTcRuRhPdAgHfTaWReOsIrPtAu3rd series1st series2nd seriesTransition elements →I.E.1 (kJ mol−1)

Ans. a. Third series has the highest first ionization energy due to poorest shielding effect of the fully filled 4f subshell.

b. This is due to lanthanoid contraction.

c. Sm²⁺, Eu²⁺ and Yb²⁺ ions are good reducing agents as they tend to acquire common oxidation state of +3 shown by lanthanoids by the loss of one electron while Ce⁴⁺ gains one electron to attain +3. Hence, Ce⁴⁺ is an oxidising agent.

Teacher's Note: Cu²⁺ oxidises iodide, forming Cu₂I₂; dichromate takes six electrons from Fe²⁺; 5d series tops due to poor 4f shielding.

Exam Note: Balance by electrons; read the highest curve.

Question 20. Answer the following questions:

Solution.

Q. Describe the preparation of potassium permanganate from pyrolusite ore. Write balanced chemical equation for one reaction to show the oxidizing nature of potassium permanganate.

Ans. Conversion of pyrolusite (MnO₂) into potassium manganate (K₂MnO₄).

2MnO₂ + 4KOH + O₂ → 2K₂MnO₄ + 2H₂O

Electrolytic oxidation:

K₂MnO₄ ⇌ 2K⁺ + MnO₄²⁻

At anode:   MnO₄²⁻ → MnO₄⁻ + e⁻

At cathode:   H⁺ + e⁻ → H,    2H → H₂

It oxidises oxalate (C₂O₄²⁻) to carbon dioxide (CO₂) in acidic medium.

MnO₄⁻ + 8H⁺ + 5e⁻ → Mn²⁺ + 4H₂O   ] × 2

C₂O₄²⁻ → 2CO₂ + 2e⁻   ] × 5

2MnO₄⁻ + 5C₂O₄²⁻ + 16H⁺ → 2Mn²⁺ + 10CO₂ + 8H₂O

Q. Draw the structures of chromate and dichromate ions. [CBSE Sample Paper 2017]

OOCrO−O−OOCrOOCrO−OO−Chromate ion (CrO42−)Dichromate ion (Cr2O72−)

Teacher's Note: Fuse MnO₂ with KOH and air, then oxidise manganate electrolytically; permanganate oxidises oxalate in acid, giving Mn²⁺ and CO₂.

Exam Note: Show fusion, electrolysis, and one oxidation equation.

Question 21. Answer the following questions:

Solution.

Q. Is the variability in oxidation number of transition elements different from that of non-transition elements? Illustrate with examples.

Ans. In transition elements, the oxidation states differ from each other by unity, e.g., Fe³⁺ and Fe²⁺ etc., while in non-transition elements (p-block elements), the oxidation states differ by two, e.g., Pb⁴⁺ and Pb²⁺, etc.

In transition elements the higher oxidation states are more stable for the heavier elements in a group, e.g., Mo(VI) is more stable than Cr(VI) whereas in non-transition elements (p-block elements), the lower oxidation states are more stable for heavier elements due to inert pair effect, e.g., Pb(II) is more stable than Pb(IV).

Q. Give reasons: a. d-block elements exhibit more oxidation states than f-block elements. b. Orange solution of potassium dichromate turns yellow on adding sodium hydroxide to it. c. Zirconium (Z = 40) and Hafnium (Z = 72) have almost similar atomic radii. [CBSE Sample Paper 2017]

Ans. (a) d-block elements exhibit more oxidation states because of less energy gap between d and s subshell whereas f-block elements have large energy gap between f and d subshell.

(b) On adding NaOH, pH of solution increases and the orange colour of the solution changes to yellow due to conversion of dichromate ion to chromate ion.

Cr₂O₇²⁻ + 2OH⁻ ⇌ 2CrO₄²⁻ + H₂O
Dichromate ion (orange) ⇌ Chromate ion (yellow)

(c) This is due to filling of 4f-orbitals which have poor shielding effect (Lanthanoid contraction).

Teacher's Note: Transition states differ by one, p-block by two; NaOH turns orange dichromate yellow; Zr and Hf share size.

Exam Note: Contrast Fe²⁺/Fe³⁺ with Pb²⁺/Pb⁴⁺.

Question 22. A violet compound of manganese (A) decomposes on heating to liberate oxygen and compounds (B) and (C) of manganese are formed. Compound (C) reacts with KOH in the presence of potassium nitrate to give compound (B). On heating compound (C) with conc. H₂SO₄ and NaCl, chlorine gas is liberated and a compound (D) of manganese along with other products is formed. Identify compounds A to D and also explain the reactions involved. [NCERT Exemplar] [HOTS]

Solution.

A = KMnO₄,   B = K₂MnO₄,   C = MnO₂,   D = MnCl₂

2KMnO₄ →(heat) K₂MnO₄ + MnO₂ + O₂
(A)              (B)       (C)

2MnO₂ + 4KOH + O₂ → 2K₂MnO₄ + 2H₂O
(C)                               (B)

MnO₂ + 4NaCl + 4H₂SO₄ → MnCl₂ + 4NaHSO₄ + 2H₂O + Cl₂
(C)                        (D)

Teacher's Note: Violet KMnO₄ heats to K₂MnO₄ and MnO₂; MnO₂ fused with alkali regenerates manganate; with NaCl and H₂SO₄ it gives MnCl₂.

Exam Note: Identify A to D, then write three equations.

Question 23. When an oxide of manganese (A) is fused with KOH in the presence of an oxidising agent and dissolved in water, it gives a dark solution of compound (B). Compound (B) disproportionates in neutral or acidic solution to give purple compound (C). An alkaline solution of compound (C) oxidises potassium iodide solution to a compound (D) and compound (A) is also formed. Identify compounds A to D and also explain the reactions involved. [NCERT Exemplar] [HOTS]

Solution.

A = MnO₂,   B = K₂MnO₄,   C = KMnO₄,   D = KIO₃

2MnO₂ + 4KOH + O₂ → 2K₂MnO₄ + 2H₂O
(A)                               (B)

3MnO₄²⁻ + 4H⁺ → 2MnO₄⁻ + MnO₂ + 2H₂O
(B)                       (C)

2MnO₄⁻ + H₂O + KI → 2MnO₂ + 2OH⁻ + KIO₃
(C)                                 (A)        (D)

Teacher's Note: MnO₂ fused with alkali and oxidant gives green K₂MnO₄, which disproportionates to KMnO₄; alkaline KMnO₄ oxidises iodide to iodate.

Exam Note: Identify A to D; write the disproportionation equation.

Question 24. (i) A blackish brown coloured solid A when fused with alkali metal hydroxides in presence of air, produces a dark green coloured compound B, which on electrolytic oxidation in alkaline medium gives a dark purple coloured compound C. Identify A, B and C and write the reactions involved. (ii) What happens when an acidic solution of the green compound (B) is allowed to stand for some time? Give the equation involved. What is this type of reaction called? [HOTS]

Solution.

i. A = MnO₂ (pyrolusite ore),   B = K₂MnO₄ (potassium manganate),   C = KMnO₄ (potassium permanganate)

Reactions involved:

2MnO₂ + 4KOH + O₂ → 2K₂MnO₄ + 2H₂O

MnO₄²⁻ → MnO₄⁻ + e⁻   (electrolytic oxidation in alkaline solution)
Manganate ion (green) → Permanganate ion (purple)

ii. In acidic medium, K₂MnO₄ changes to give purple coloured compound along with black precipitate.

3MnO₄²⁻ + 4H⁺ → 2MnO₄⁻ + MnO₂ + 2H₂O
Green compound → Purple compound + Black

This type of reaction is called disproportionation reaction.

Teacher's Note: Black MnO₂ fused with alkali and air gives green manganate, oxidised electrolytically to purple permanganate; acid makes manganate disproportionate.

Exam Note: Name A, B, C and the disproportionation reaction.

Step-by-Step Xam Idea Solutions for Class 12 Math

Access Class 12 Mathematics Solutions

Review detailed solutions for Class 12 Mathematics. The Xam Idea Solutions Class 12 Chemistry Chapter 8 The D–and F– Block Elements Long Answer Questions PDF provides comprehensive answers mapped to standard Xam Idea Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.

Mastering Core Concepts with Xam Idea Solutions

Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.

Explore More Study Resources for Class 12 Math

In addition to these Xam Idea Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.

FAQs

What are these [current-page:node:field_author] Solutions for Class 12 Chemistry?

They are chapter-wise solved questions from the book for Class 12 Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 12 Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 12 Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 12 Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 12 Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.