Xam Idea Solutions Class 12 Chemistry Chapter 15 Polymers Short Answer Questions I

Official Textbook Solutions: Class 12 Chemistry Chapter 15 Polymers

Review structured textbook solutions for Class 12 Chemistry Chapter 15 Polymers prepared by . Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.

Chapter-wise Solutions for Chemistry: Chapter 15 Polymers

Navigate directly to the solved Chemistry textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.

Short Answer Questions I

Question 1. Write the name of monomers used for getting the following polymers: [CBSE (AI) 2014]

Teflon

Solution.

Tetrafluoroethene

Q. Buna-N

Ans. 1, 3–butadiene and acrylonitrile

Teacher's Note: Teflon is made from tetrafluoroethene, and Buna-N from butadiene and acrylonitrile.

Exam Note: Monomers for Teflon and Buna-N.

Question 2. Write the name of monomers used for getting the following polymers: [CBSE (AI) 2014]

Bakelite

Solution.

Phenol and formaldehyde

Q. Neoprene

Ans. Chloroprene

Teacher's Note: Bakelite is made from phenol and formaldehyde, and neoprene from chloroprene.

Exam Note: Match each polymer to its monomers.

Question 3. Name the sub-groups into which polymers are classified on the basis of magnitude of intermolecular forces. [CBSE Delhi 2011]

Solution.

On the basis of magnitude of intermolecular forces polymers are classified into following four sub-groups:

i. Elastomers ii. Fibres iii. Thermoplastic polymers iv. Thermosetting polymers

Teacher's Note: On the basis of intermolecular forces, polymers are grouped as elastomers, fibres, thermoplastics and thermosetting polymers.

Exam Note: Four sub-groups by intermolecular force.

Question 4. Arrange the following polymers in increasing order of their intermolecular forces: [CBSE (F) 2013] i. Nylon-6,6, Buna-S, Polythene ii. PVC, Nylon-6, Neoprene

Solution.

i. Buna-S < Polythene < Nylon 6,6. ii. Neoprene < PVC < Nylon-6.

Teacher's Note: Intermolecular forces increase from elastomers to thermoplastics to fibres, which gives the order.

Exam Note: Fibres have the strongest forces.

Question 5. Write the structures of the monomers of the following polymers: (i) PVC (ii) Polypropene

Solution.

S.No.PolymersMonomerStructures of the Monomer
(i)PVCVinyl chlorideCH = CH—Cl 2
(ii)PolypropenePropeneCH —CH=CH 3 2

Teacher's Note: PVC comes from vinyl chloride, and polypropene comes from propene.

Exam Note: Monomers of PVC and polypropene.

Question 6. Differentiate the following pair of polymers based on the property mentioned against each.

Novolac and bakelite (structure)

Solution.

Novolac is a straight chain linear polymer but bakelite is cross linked.

Q. Buna-S and terylene (intermolecular forces of attraction)

Ans. Buna-S is an elastomer having weak van der Waals intermolecular forces whereas terylene is a fibre having strong intermolecular hydrogen bonding.

Teacher's Note: Novolac is a linear chain polymer whereas bakelite is cross-linked, and elastomers have weak forces unlike fibres.

Exam Note: State chain structure for each polymer.

Question 7. What are LDPE and HDPE? How are they prepared?

Solution.

LDPE (Low Density Polyethylene): LDPE is obtained by the polymerisation of ethene under high pressure of 1000–2000 atm at 350–570 K in the presence of an initiator.

HDPE (High Density Polyethylene): It is obtained when polymerisation is done in the presence of Ziegler–Natta catalyst at 333–343 K under 6–7 atm pressure.

Teacher's Note: Low-density polyethylene forms under high pressure with an initiator, while the high-density type forms at low pressure with catalysts.

Exam Note: Give conditions for both polyethylenes.

Question 8. How does the presence of benzoquinone inhibit the free radical polymerisation of a vinyl derivative?

Solution.

Benzoquinone traps the radical intermediate to form a non-reactive radical, which is highly stabilised by resonance. Due to the lack of reactivity of this intermediate, further progress of the chain reaction is interrupted and the reaction stops.

Teacher's Note: Benzoquinone captures the free radical to give a stable, unreactive species, so the chain reaction stops.

Exam Note: Say it acts as a radical trap.

Question 9. Answer the following questions:

Why are rubbers called elastomers? [NCERT Exemplar]

Solution.

Rubbers are stretched on application of force and regain original state after the force is removed. Therefore, these are called elastomers.

Q. Why should the monomers used in addition polymerisation through free radical pathway be very pure?

[NCERT Exemplar]

Ans. Pure monomers are required because even the traces of impurities may act like inhibitors which leads to the formation of polymers with shorter chain length.

Teacher's Note: Rubbers stretch under force and return to shape afterwards, so they are called elastomers.

Exam Note: Link stretch and recovery with the name.

Question 10. Answer the following question :

How does vulcanisation change the properties of natural rubber?

Solution.

Rubber gets cross-linked through —S—S— bonds and becomes hard on vulcanisation.

Q. Why are the numbers 6,6 and 6 put in the names of nylon 6, 6 and nylon 6? Ans. In nylon-6,6, two sixes stand for hexamethylene diamine (a monomer with 6C–atoms) and adipic acid (another monomer with 6C–atoms).

In nylon-6, six stands for the only monomer caprolactam (6 C–atoms).

Teacher's Note: Vulcanisation forms sulphur cross-links in rubber, making it harder, stronger and less sticky.

Exam Note: Mention sulphur cross-links.

Question 11. Write equations for the synthesis of the given polymers: (a) Glyptal (b) Teflon

Solution.

(a) Glyptal: n HOCH2–CH2OH (ethylene glycol) + n HOOC–C6H4–COOH (phthalic acid, ortho) → –[O–CH2–CH2–O–C(=O)–C6H4–C(=O)]n– (glyptal) + 2n H2O

(b) Teflon: n CF2=CF2 (tetrafluoroethene) → (catalyst, high pressure) –[CF2–CF2]n– (Teflon)

Teacher's Note: Glyptal is a condensation polymer; Teflon is an addition polymer.

Exam Note: Balance with n and name the products.

Download Xam Idea Solutions for Class 12 Math PDF

Access Class 12 Mathematics Solutions

Review detailed solutions for Class 12 Mathematics. The Xam Idea Solutions Class 12 Chemistry Chapter 15 Polymers Short Answer Questions I PDF provides comprehensive answers mapped to standard Xam Idea Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.

Concept-Driven Math Answers

Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.

Additional Study Materials for 2026

In addition to these Xam Idea Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.

FAQs

What are these [current-page:node:field_author] Solutions for Class 12 Chemistry?

They are chapter-wise solved questions from the book for Class 12 Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 12 Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 12 Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 12 Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 12 Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.