Official Pradeep's KL Gogia Textbook Solutions: Class 12 Chemistry Chapter 15 Polymers
Review structured textbook solutions for Class 12 Chemistry Chapter 15 Polymers prepared by Pradeep's KL Gogia. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.
Chapter-wise Solutions for Chemistry: Chapter 15 Polymers
Access the complete solution PDF for Class 12 Chemistry below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.
Pradeep's KL Gogia Solutions Class 12 Chemistry Chapter 15 Polymers - Question Bank Solutions
Very Short Answer Type Questions (1 Mark)
Question 1. Define the term 'homopolymerisation' giving an example.
Solution. The polymer formed by the polymerization of single/same monomeric species is known as homopolymerisation. E.g., Polythene/PVC/Polypropene.
Teacher's Note: Homopolymer means one kind of monomer repeated; contrast with copolymers made from two or more monomers.
Exam Note: Give definition plus one example.
Question 2. Give an example of elastomer.
Solution. Natural rubber or Buna-S or Buna-N or Neoprene.
Teacher's Note: Elastomers have the weakest intermolecular forces, so they stretch and recover.
Exam Note: One named example earns the mark.
Question 3. Why is bakelite a thermosetting polymer ?
Solution. Because bakelite have three dimensional network of covalent bonds with cross-linking between chains.
Teacher's Note: Cross-linking makes it infusible once set; it cannot be remelted like thermoplastics.
Exam Note: State cross-linked 3-D network.
Question 4. Write the monomers of Buna-N.
Solution. H2C = CH – CH = CH2 (1,3-Butadiene) + H2C = CH(CN) (Acrylonitrile)
Teacher's Note: Buna-N is a copolymer of butadiene and acrylonitrile (CH2=CH-CN).
Exam Note: Name both monomers with formulae.
Question 5. Is [H2C–CH(C6H5)]n a homopolymer or copolymer ? Why ?
Solution. Homopolymer, because it is formed by polymerization of one kind of monomer species.
Teacher's Note: This is polystyrene, made only from styrene; one monomer means homopolymer.
Exam Note: Give type and reason.
Question 6. Write the structure and one use of urea formaldehyde resin.
Solution. [–HN–CO–NH–CH2–]n
It is used in unbreakable crockery.
Teacher's Note: Urea-formaldehyde resin is a cross-linked thermosetting condensation polymer.
Exam Note: Write repeating unit and one use.
Question 7. Is [H2C–CH(Cl)]n a homopolymer or a copolymer ?
Solution. Homopolymer.
Teacher's Note: This is PVC, from the single monomer vinyl chloride.
Exam Note: One word suffices.
Question 8. Which of the following is natural polymer ? Buna-S, Proteins, PVC
Solution. Proteins.
Teacher's Note: Buna-S and PVC are synthetic; proteins occur in living organisms.
Exam Note: Pick the natural one.
Question 9. Based on molecular forces what type of polymer is neoprene ?
Solution. Elastomer.
Teacher's Note: Neoprene has weak forces between chains, like natural rubber.
Exam Note: Classify by intermolecular forces.
Question 10. Which of the following is a fibre ? Nylon, Neoprene, PVC
Solution. Nylon.
Teacher's Note: Fibres have strong hydrogen bonding and high tensile strength; neoprene is an elastomer, PVC a thermoplastic.
Exam Note: Recall classification by forces.
Question 11. Name a natural elastomer.
Solution. Natural rubber.
Teacher's Note: Natural rubber is cis-polyisoprene.
Exam Note: One word answer.
Question 12. Write name of a synthetic polymer which is an ester.
Solution. Terylene.
Teacher's Note: Terylene (Dacron) is a polyester of ethylene glycol and terephthalic acid.
Exam Note: Name a polyester.
Question 13. Name of monomer of Nylon 6.
Solution. Aminocaproic acid
Teacher's Note: Nylon-6 forms from caprolactam, which hydrolyses to aminocaproic acid.
Exam Note: Name the monomer.
Question 14. Write the monomer units of bakelite.
Solution. Phenol and formaldehyde.
Teacher's Note: Bakelite is a phenol-formaldehyde cross-linked condensation polymer.
Exam Note: Name both monomers.
Question 15. Define a copolymer.
Solution. The polymers made by addition polymerisation from two different monomers are termed as copolymers. E.g., Buna-S, Buna-N etc.
Teacher's Note: Copolymers contain two or more different repeating units in one chain.
Exam Note: Definition plus example.
Question 16. Write one use of PVC.
Solution. In manufacture of raincoats and vinyl flooring.
Teacher's Note: PVC is a tough, rigid thermoplastic used for pipes and coverings.
Exam Note: One use suffices.
Question 17. Define polymer.
Solution. Polymer is defined as very large molecules having molecular mass (103-107 u). These are also referred to as macromolecules.
Teacher's Note: Polymers are built from repeating structural units called monomers.
Exam Note: Mention large molecular mass and macromolecule.
Question 18. Give an example of thermoplastics.
Solution. Thermoplastics are polythene, polystyrene, polyvinyls etc.
Teacher's Note: Thermoplastics soften on heating and harden on cooling repeatedly.
Exam Note: One example is enough.
Question 19. To which class of polymers does Nylon-66 belong ?
Solution. Polyamides.
Teacher's Note: The repeating unit contains amide (-CONH-) linkages.
Exam Note: Name the class.
Question 20. Name the type of monomers in terylene.
Solution. Ethylene glycol and terephthalic acid.
Teacher's Note: Terylene is a condensation polymer of a diol and a dicarboxylic acid.
Exam Note: Name both monomers.
Question 21. How do you explain the functionality of a monomer ?
Solution. Functionality means the number of bonding sites in a molecule. E.g., CH2=CH2 (ethene) has two bonding sites (bifunctional).
Teacher's Note: Functionality decides chain type: bifunctional gives linear, trifunctional gives cross-linked polymers.
Exam Note: Define as number of bonding sites; give example.
Question 22. Give chemical name of teflon.
Solution. Polytetrafluoroethene.
Teacher's Note: Teflon is made by polymerising tetrafluoroethene, F2C=CF2.
Exam Note: Write full chemical name.
Question 23. The Ziegler-Natta catalyst is used for polymerisation of ........... .
Solution. Triethylaluminium + Titanium tetrachloride
Teacher's Note: Ziegler-Natta catalyst (Et3Al + TiCl4) gives stereoregular polyethene; book's answer names the catalyst components.
Exam Note: Recall catalyst components.
Short Answer-I Type Questions (2 Marks)
Question 1. Draw the structure of monomers of each of the polymers : (i) PVC (ii) Nylon-6
Solution. (i) H2C = CH(Cl), vinyl chloride.
(ii) Caprolactam: a seven-membered ring, (CH2)5 closed through the amide group -NH-C(=O)-.
Teacher's Note: Nylon-6 monomer is the cyclic amide caprolactam; ring opens during polymerisation.
Exam Note: Draw both structures, name them.
Question 2. What is the repeating unit in the condensation polymer obtained by combining HOOCCH2CH2COOH (succinic acid) and H2NCH2CH2NH2 (ethylene diamine) ?
Solution. nHOOC–CH2CH2COOH + nH2NCH2CH2NH2 → [–CO–CH2CH2–CO–NH–CH2CH2–NH–]n (+ 2nH2O)
Teacher's Note: Acid and amine lose water to form amide links; repeating unit includes both monomers.
Exam Note: Show both halves in the repeating unit.
Question 3. Draw the structure of monomers of the following polymers : (i) Teflon (ii) Polythene
Solution. (i) F2C = CF2 Tetrafluoroethene
(ii) H2C = CH2 Ethene
Teacher's Note: Both are addition polymers from alkene monomers.
Exam Note: Write formulae with names.
Question 4. Name the two groups into which polymers are classified on the basis of magnitude of intermolecular forces.
Solution. (i) Elastomers (ii) Fibres (iii) Thermoplastic polymers (iv) Thermosetting polymers
Teacher's Note: Book lists four classes; elastomers weakest forces, fibres strongest.
Exam Note: List all four given in the answer.
Question 5. Mention two important uses of each of the following : (i) Bakelite (ii) Nylon-6
Solution. (i) Bakelite : For making combs, electrical switches, handles of utensils, computer disc etc.
(ii) Nylon-6 : For making tyre cords, fabrics, ropes etc.
Teacher's Note: Bakelite is a heat-resistant insulator; nylon-6 is strong and fibrous.
Exam Note: Give two uses per polymer.
Question 6. Distinguish between homopolymers and copolymers with an example of each.
Solution. Homopolymers : Polymers whose repeating structural units are derived from only one type of monomer units are called homopolymers. For example, Polythene.
Copolymers : Polymers whose repeating structural units are derived from two or more types of monomer units are called copolymers. For example, Nylon-6, 6.
Teacher's Note: Homo: one monomer; co: two or more monomers in the same chain.
Exam Note: Define both with one example each.
Question 7. What is step growth polymerisation ? Explain with an example.
Solution. Step growth polymerisation involves condensation between monomers having multifunctional groups. It is also known as condensation polymerisation. E.g.,
nHOOC–(CH2)4–COOH + nH2N–(CH2)6NH2 → [–CO–(CH2)4–CO–NH–(CH2)6–NH–]n (Nylon 6, 6) + (2n–1)H2O
Teacher's Note: Chain grows stepwise with loss of small molecules like water; nylon-6,6 is the standard example.
Exam Note: Definition, equation and name of polymer.
Question 8. What is the difference between elastomers and fibres ? Give one example of each.
Solution. Elastomers : Polymers in which the intermolecular forces of attraction between the polymer chains are weakest are called elastomers. E.g., Natural rubber.
Fibres : Polymers in which intermolecular forces of attraction are the strongest are called fibres. E.g., Nylon-6, 6.
Teacher's Note: Fibres have hydrogen bonding and high tensile strength; elastomers stretch and recoil.
Exam Note: Compare forces; give one example each.
Question 9. Mention the important uses of each : (i) Nylon-6, 6 (ii) PVC
Solution. (i) Uses of Nylon-6, 6 : (a) It is used in making carpets, textile fibres etc. (b) It is used for making elastic hosiery.
(ii) Uses of PVC : (a) It is used for making raincoats, hand bags etc. (b) It is used in making water pipes.
Teacher's Note: Uses follow properties: nylon is strong and fibrous, PVC is tough and waterproof.
Exam Note: Two uses per polymer.
Question 10. Arrange the following polymers in the order of increasing intermolecular forces : (i) Nylon-6, Buna-S, Polythene (ii) Nylon-6, Neoprene, Polyvinyl chloride
Solution. (i) Buna-S < Polythene < Nylon-6
(ii) Neoprene < Polyvinyl chloride < Nylon-6
Teacher's Note: Order is elastomer, then thermoplastic, then fibre; nylon-6 has hydrogen bonds.
Exam Note: Classify each polymer first, then order.
Question 11. Define thermoplastic and thermosetting polymers. Give one example of each.
Solution. Thermoplastics : Polymers in which the intermolecular forces of attraction are in between those of elastomers and fibres are called thermoplastics. E.g., Nylon-6, PVC, etc.
Thermosetting polymers : These are semi-fluid substances with low molecular masses which when heated in a mould undergo a permanent change in chemical composition to give hard, infusible and insoluble mass. E.g., Bakelite.
Teacher's Note: Thermoplastics remelt repeatedly; thermosets cross-link permanently. PVC and bakelite are safest examples.
Exam Note: Definition and example for both.
Question 12. What is biodegradable polymer ? Give an example of a biodegradable polymer.
Solution. Biodegradable polymers are those which are decomposed by micro organisms. E.g., PHBV (Poly-β-hydroxybutyrate-co-β-hydroxyvalerate).
Teacher's Note: PHBV is a copolymer of 3-hydroxybutanoic and 3-hydroxypentanoic acids.
Exam Note: Define and name PHBV.
Question 13. How does vulcanization change the character of natural rubber ?
Solution. It introduces sulphur bridge or cross-link between polymer chains.
Teacher's Note: Sulphur cross-links make rubber harder, stronger and less sticky, with better elasticity.
Exam Note: Mention sulphur cross-links.
Question 14. Name a polymer each for the following applications : (i) Insulation of electrical switches (ii) Making laminated sheets
Solution. (i) Bakelite (ii) Urea formaldehyde resin
Teacher's Note: Both are thermosetting resins; bakelite is a good electrical insulator.
Exam Note: Name one polymer for each use.
Question 15. How does the presence of double bonds in rubber influence their structure and reactivity ?
Solution. Natural rubber is a cis-polyisoprene. These cis- double bonds do not allow the polymer units to come close for effective interaction. Hence rubber shows elasticity.
Teacher's Note: Cis geometry gives coiled chains with weak forces; double bonds also allow vulcanization.
Exam Note: Mention cis-configuration and weak forces.
Short Answer-II Type Questions (3 Marks)
Question 1. Write the names and structure of the monomers of the following polymers : (i) Buna-S (ii) Neoprene (iii) Nylon-6
Solution. (i) Buna-S : H2C = CH – CH = CH2 (1,3-Butadiene) and C6H5–CH = CH2 (Styrene; benzene ring bearing a vinyl group).
(ii) Neoprene : H2C = C(Cl) – CH = CH2 (Chloroprene).
(iii) Nylon-6 : Caprolactam, a seven-membered cyclic amide: ring of -NH-C(=O)- plus five CH2 groups.
Teacher's Note: Buna-S: butadiene plus styrene; neoprene: chloroprene; nylon-6: caprolactam.
Exam Note: Name monomers and show structures.
Question 2. Differentiate between thermoplastics and thermosetting polymers. Give one example of each.
Solution. Same as Q. 11 (Two marks questions): Thermoplastics : Polymers in which the intermolecular forces of attraction are in between those of elastomers and fibres. E.g., Nylon-6, PVC, etc.
Thermosetting polymers : These are semi-fluid substances with low molecular masses which when heated in a mould undergo a permanent change in chemical composition to give hard, infusible and insoluble mass. E.g., Bakelite.
Teacher's Note: Thermoplastics are linear and remoldable; thermosets are cross-linked and cannot be remelted.
Exam Note: Give two or more differences with examples.
Question 3. Write names and structure of monomers of following polymers : (i) Bakelite (ii) Nylon-6 (iii) Polythene
Solution. (i) Phenol and formaldehyde: C6H5OH + HCHO
(ii) Caprolactam, the seven-membered cyclic amide (ring of -NH-C(=O)- and five CH2 groups)
(iii) Ethene: H2C = CH2
Teacher's Note: Bakelite is condensation of phenol with HCHO; polythene is addition polymer of ethene.
Exam Note: Name and write formulae for all three.
Question 4. Write names and structure of monomers of following polymers : (i) Polystyrene (ii) Dacron (iii) Teflon
Solution. (i) Styrene: C6H5–CH = CH2 (benzene ring bearing a vinyl group)
(ii) Ethylene glycol + Terephthalic acid: HOH2C–CH2OH + HOOC–C6H4–COOH (para-substituted benzene ring)
(iii) Tetrafluoroethene: F2C = CF2
Teacher's Note: Dacron is the same polyester as terylene; teflon from tetrafluoroethene.
Exam Note: Name monomers and write formulae.
Question 5. (i) What is the role of t-butyl peroxide in the polymerisation of ethane ? (ii) Identify the monomers in the following polymer : [–HN(CH2)6NHCO(CH2)4CO–]n (iii) Arrange the following polymers in the increasing order of their intermolecular forces : Polystyrene, Terylene, Buna-S
Solution. (i) Catalyst/initiator of free radical
(ii) Hexamethylenediamine and adipic acid
(iii) Buna-S < Polystyrene < Terylene
Teacher's Note: Peroxide splits into free radicals that start the chain; this polymer is nylon-6,6.
Exam Note: Initiator, two monomers, correct order.
Question 6. Write the mechanism of free radical polymerisation of ethane.
Solution. (i) Chain initiation step : Benzoyl peroxide, C6H5C(=O)–O–O–C(=O)C6H5 → 2C6H5C(=O)O• → 2C6H5• (phenyl radical) + 2CO2. Then C6H5• + H2C=CH2 → C6H5CH2CH2•
(ii) Chain propagating step : C6H5CH2CH2• + H2C=CH2 → C6H5CH2CH2CH2CH2• → … C6H5(CH2CH2)nCH2CH2•
(iii) Chain terminating step : two chain radicals combine: C6H5(CH2CH2)nCH2CH2• + •CH2CH2(CH2CH2)nC6H5 → C6H5(CH2CH2)nCH2CH2CH2CH2(CH2CH2)nC6H5
Teacher's Note: Three steps: initiation (radical formation), propagation (chain growth), termination (radical coupling). The monomer is ethene (book prints ethane).
Exam Note: Write all three steps in order.
Question 7. Write chemical equation for the synthesis of : (i) Nylon-6, 6 (ii) Neoprene (iii) Terylene
Solution. (i) Nylon-6, 6 : nHOOC–(CH2)4–COOH (adipic acid) + nH2N–(CH2)6–NH2 (hexamethylenediamine) → [–CO–(CH2)4–CO–NH–(CH2)6–NH–]n + (2n–1)H2O
(Corrected: the book labels the diamine 'ethylene diamine'; the compound used, H2N(CH2)6NH2, is hexamethylenediamine.)
(ii) Neoprene : nH2C=C(Cl)–CH=CH2 (chloroprene) → [–H2C–C(Cl)=CH–CH2–]n
(iii) Terylene : nHO–CH2CH2–OH (ethylene glycol) + nHOOC–C6H4–COOH (terephthalic acid, para) → [–O–CH2CH2–O–CO–C6H4–CO–]n + 2nH2O
Teacher's Note: Nylon-6,6 uses a six-carbon diamine, not ethylene diamine; neoprene is addition, others condensation.
Exam Note: Balance water: (2n-1) for nylon-6,6.
Question 8. Write the monomers which are used for the synthesis of following polymers : (i) Terylene (ii) Polythene (iii) Bakelite. Indicate the type of polymerisation for each which forms polymers.
Solution.
| Polymer | Monomers | Type of polymerisation |
|---|---|---|
| (i) Terylene | Ethylene glycol + Terephthalic acid | Condensation |
| (ii) Polythene | Ethene | Addition |
| (iii) Bakelite | Phenol + Formaldehyde | Condensation |
Teacher's Note: Condensation loses small molecules like water; addition joins monomers with no by-product.
Exam Note: Give monomers and type for each.
Question 9. How are polymers classified on the basis of mode of polymerisation ? Explain with examples.
Solution. Addition polymers : Are formed by repeated addition of a large number of same or different monomers possessing double or triple bonds. E.g., Polythene: nH2C=CH2 → [–H2C–CH2–]n (Ethene to Polythene).
Condensation polymers : Are formed by repeated condensation reaction between two bifunctional or trifunctional monomer units usually with the elimination of small molecules like water, alcohol, ammonia, etc. E.g., Nylon-6, 6.
nHOOC(CH2)4COOH + nH2N(CH2)6NH2 → [–CO–(CH2)4–CO–NH–(CH2)6–NH–]n + (2n–1)H2O
Teacher's Note: Two types: addition (unsaturated monomers, no by-product) and condensation (small molecule eliminated).
Exam Note: Define both, with one equation each.
Question 10. A monomer of a polymer on ozonolysis gives two moles of CH2O and one mol of CH3–CO–CHO. Write the structure of monomer and polymer and each step of reaction.
Solution. Structure of monomer : CH2O + O=C(CH3)–CHO + OCH2 ← CH2=C(CH3)–CH=CH2 (isoprene, 2-methylbuta-1,3-diene), i.e. the monomer is CH2=C(CH3)–CH=CH2.
Structure of polymer : [–CH2–C(CH3)=CH–CH2–]n (cis-polyisoprene, natural rubber; CH3 and H on the double bond carbons on the same side).
Teacher's Note: Joining the carbonyl fragments back at the two C=C sites gives isoprene; its polymer is natural rubber.
Exam Note: Work backwards from ozonolysis fragments.
Question 11. Can a copolymer be formed in both addition and condensation polymerisation ? Explain with examples.
Solution. Yes. Buna-S, Buna-N : Addition polymer. Nylon-6, 6, terylene : Condensation.
Teacher's Note: Copolymers can form either way: Buna-S by addition, nylon-6,6 by condensation.
Exam Note: Say yes, then give examples of each.
Long Answer Type Questions (5 Marks)
Question 1. How are following polymers obtained ? Write the names and structures of monomers and structure of respective polymers : (i) Dacron (ii) Nylon-6 (iii) Buna-N (iv) Glyptal (v) PHBV
Solution. (i) Dacron : By condensation polymerisation.
nHOH2C–CH2OH (ethylene glycol) + nHOOC–C6H4–COOH (terephthalic acid, para) → [–O–CH2CH2–O–CO–C6H4–CO–]n (Dacron)
(ii) Nylon-6 : By condensation polymerisation. Caprolactam (cyclic amide, seven-membered ring of -NH-C(=O)- and five CH2) → (water, 533–543 K) [H3N+(CH2)5COO–] → [–NH–(CH2)5–CO–]n (Nylon-6)
(iii) Buna-N : By addition polymerisation. nH2C=CH–CH=CH2 (1,3-butadiene) + nH2C=CH(CN) (acrylonitrile) → [–CH2–CH=CH–CH2–CH2–CH(CN)–]n (Buna-N)
(iv) Glyptal : By condensation polymerisation. nHOH2C–CH2OH (ethylene glycol) + nHOOC–C6H4–COOH (phthalic acid, ortho) → [–O–CH2CH2–O–CO–C6H4–CO–]n (Glyptal)
(v) PHBV : By condensation polymerisation. nHO–CH(CH3)–CH2–COOH (3-hydroxybutanoic acid) + nHO–CH(CH2CH3)–CH2–COOH (3-hydroxypentanoic acid) → [–O–CH(CH3)–CH2–CO–O–CH(CH2CH3)–CH2–CO–]n (PHBV)
Teacher's Note: Dacron, nylon-6, glyptal and PHBV are condensation polymers; Buna-N is an addition copolymer. Learn each monomer pair.
Exam Note: Write monomers, equation and polymer unit for each.
Free study material for Chemistry
Step-by-Step Pradeep's KL Gogia Solutions for Class 12 Math
Chapter-wise Pradeep's KL Gogia Solutions: Pradeep's KL Gogia Solutions Class 12 Chemistry Chapter 15 Polymers
Access the complete chapter-wise PDF for Pradeep's KL Gogia Solutions Class 12 Chemistry Chapter 15 Polymers. These structured Pradeep's KL Gogia Solutions solutions for Class 12 Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.
Step-by-Step Mathematical Explanations
Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.
Next Steps in Your Mathematics Revision
In addition to these Pradeep's KL Gogia Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.
FAQs
They are chapter-wise solved questions from the Pradeep's KL Gogia book for Class 12 Chemistry. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.