These NCERT Exemplar solutions for Class 12 Physics Chapter 8, Electromagnetic Waves, give step-by-step answers to all 32 questions: 8 MCQs, 5 multiple-correct MCQs, 7 very short, 7 short and 5 long answer questions. They cover displacement current, the Ampere-Maxwell law, the relation between E and B in a plane wave, energy density, intensity, the Poynting vector, radiation pressure and the parts of the electromagnetic spectrum. Each answer is followed by a short Teacher's Note to build understanding and an Examination Note on how to present the answer for better marks.
Multiple Choice Questions (MCQs)
(a) visible region
(b) infrared region
(c) ultraviolet region
(d) microwave region
Show Answer & Explanation
Answer: (c) ultraviolet region
Explanation:
1. The photon energy must be at least 11 eV: \( E = h\nu \).
2. \( \nu = \dfrac{E}{h} = \dfrac{11\times1.6\times10^{-19}}{6.62\times10^{-34}} \approx 2.66\times10^{15}\ \text{Hz} \).
3. This frequency is above the visible range (about \( 4\times10^{14} \) to \( 8\times10^{14} \) Hz), so it lies in the ultraviolet region.
Teacher's Note:
1. Convert electron-volts to joules first (1 eV = 1.6 × 10−19 J), then divide by h.
2. Frequencies of about 1015 Hz and above are ultraviolet; visible light is near 1014 Hz.
Examination Note: Show E = hν, the conversion of eV to joules and the final frequency with its unit; then name the region by comparing with the ranges of the spectrum.
(a) Er = E0 î cos(kz − ωt)
(b) Er = E0 î cos(kz + ωt)
(c) Er = −E0 î cos(kz + ωt)
(d) Er = E0 î sin(kz − ωt)
Show Answer & Explanation
Answer: (c) Er = −E0 î cos(kz + ωt)
Explanation:
1. After normal reflection the wave travels in the opposite direction, so \( kz - \omega t \) becomes \( kz + \omega t \). This rules out (a) and (d).
2. At a perfectly reflecting (conducting) wall the reflected electric field has a phase change of \( \pi \) (it is reversed in sign), because the total tangential electric field at the wall must be zero.
3. So the reflected wave has the same amplitude and direction \( \hat i \), the opposite travel direction and an extra phase \( \pi \): \( \vec E_r = E_0\hat i\cos(kz + \omega t + \pi) = -E_0\hat i\cos(kz + \omega t) \). Option (b) has the wrong sign, so the correct option is (c).
Teacher's Note:
1. Reflection from a denser medium or a conductor reverses the electric field vector (a phase change of π); the direction of travel also reverses.
2. The options leave out a constant phase that depends on the wall position z = a; the sign and the direction of travel are what separate the options.
Examination Note: Make two changes to the incident wave and say why: +ωt for the reversed direction and a minus sign for the phase change of π on reflection.
(a) 36 × 10−5 kg-m/s
(b) 36 × 10−4 kg-m/s
(c) 108 × 104 kg-m/s
(d) 1.08 × 107 kg-m/s
Show Answer & Explanation
Answer: (b) 36 × 10−4 kg-m/s
Explanation:
1. Energy falling in time t: \( U = \phi A t = 20\times30\times(30\times60) = 1.08\times10^{6}\ \text{J} \).
2. For complete absorption the momentum delivered is \( p = \dfrac{U}{c} = \dfrac{1.08\times10^{6}}{3\times10^{8}} = 3.6\times10^{-3} = 36\times10^{-4}\ \text{kg m/s} \).
Teacher's Note:
1. A wave carrying energy U also carries momentum U/c; absorbing it passes this momentum to the surface.
2. Change the time to seconds before multiplying (30 min = 1800 s).
Examination Note: Write the energy first, then p = U/c. Convert minutes to seconds and cm² as given, since flux is in W/cm²; the units cancel correctly this way.
(a) \( \dfrac{E}{2} \)
(b) 2E
(c) \( \dfrac{E}{\sqrt2} \)
(d) \( \sqrt{2}\,E \)
Show Answer & Explanation
Answer: (c) \( \dfrac{E}{\sqrt2} \)
Explanation:
1. At the same distance, the intensity is proportional to the power: \( I \propto P \).
2. The intensity is also proportional to the square of the electric field amplitude: \( I \propto E^{2} \). Hence \( E \propto \sqrt{P} \).
3. \( \dfrac{E'}{E} = \sqrt{\dfrac{50}{100}} = \dfrac{1}{\sqrt2} \), so \( E' = \dfrac{E}{\sqrt2} \).
Teacher's Note:
1. Intensity depends on the square of the field amplitude, so halving the power reduces the field only by a factor of √2.
2. Do not stop at E' / E = 1/2; that is the ratio of the powers, not of the fields.
Examination Note: State I ∝ E² and I ∝ P, then take the square root of the power ratio. Many students forget the square root.
(a) E
(b) B
(c) B × E
(d) E × B
Show Answer & Explanation
Answer: (d) E × B
Explanation:
1. In an electromagnetic wave the electric and magnetic fields are perpendicular to each other and also perpendicular to the direction of propagation.
2. The direction of travel is given by the direction of the Poynting vector \( \vec S = \dfrac{1}{\mu_0}\vec E\times\vec B \), so the wave travels along \( \vec E\times\vec B \).
Teacher's Note:
1. Use the right-hand rule: turn the fingers from E towards B; the thumb gives the direction of propagation.
2. The wave is transverse: neither E nor B points along the direction of travel.
Examination Note: Name the Poynting vector or say that the wave travels along E × B, in the order E then B.
(a) c : 1
(b) c2 : 1
(c) 1 : 1
(d) \( \sqrt{c} \) : 1
Show Answer & Explanation
Answer: (c) 1 : 1
Explanation:
1. Energy density due to the electric field: \( u_E = \dfrac12\varepsilon_0E_0^{2} \). Energy density due to the magnetic field: \( u_B = \dfrac{B_0^{2}}{2\mu_0} \).
2. Using \( E_0 = cB_0 \) and \( c^{2} = \dfrac{1}{\mu_0\varepsilon_0} \): \( u_E = \dfrac12\varepsilon_0c^{2}B_0^{2} = \dfrac12\varepsilon_0\cdot\dfrac{1}{\mu_0\varepsilon_0}B_0^{2} = \dfrac{B_0^{2}}{2\mu_0} = u_B \).
3. The two contributions are equal, so the ratio is 1 : 1.
Teacher's Note:
1. The energy of an electromagnetic wave is shared equally between its electric and magnetic fields.
2. Intensity is energy density times the speed c; since the energy densities are equal, the contributions to intensity are equal as well.
Examination Note: Show uE = uB using E0 = cB0. Writing the equality of the two energy densities is the key step.
(a) \( \dfrac{1}{r^{3}} \)
(b) \( \dfrac{1}{r^{2}} \)
(c) \( \dfrac{1}{r} \)
(d) remains constant
Show Answer & Explanation
Answer: (c) \( \dfrac{1}{r} \)
Explanation:
1. The radiated power spreads over a sphere of area \( 4\pi r^{2} \), so the intensity falls as \( 1/r^{2} \).
2. Since intensity is proportional to \( E_0^{2} \), the field amplitude falls as \( E_0 \propto \dfrac{1}{r} \). This is the radiation field; the other terms, which fall as 1/r2 and 1/r3, do not carry significant energy to large distances.
Teacher's Note:
1. I ∝ 1/r² and I ∝ E0², so E0 ∝ 1/r.
2. Terms falling faster than 1/r are important only close to the antenna.
Examination Note: Use intensity ∝ 1/r² together with intensity ∝ E0² to get the 1/r law in two lines.
(a) The associated magnetic field is given as \( \vec B = \dfrac{1}{c}(E_1\hat j - E_2\hat i)\cos(kz-\omega t) \)
(b) The associated magnetic field is given as \( \vec B = \dfrac{1}{c}(E_1\hat i - E_2\hat j)\cos(kz-\omega t) \)
(c) The given electromagnetic field is circularly polarised
(d) The given electromagnetic wave is plane polarised
Show Answer & Explanation
Answer: (a) The associated magnetic field is given as \( \vec B = \dfrac{1}{c}(E_1\hat j - E_2\hat i)\cos(kz-\omega t) \), (d) The given electromagnetic wave is plane polarised
Explanation:
1. The magnetic field of a wave travelling along +z is \( \vec B = \dfrac{1}{c}\,\hat k\times\vec E \), since \( \vec E\times\vec B \) must point along +z.
2. \( \hat k\times(E_1\hat i + E_2\hat j) = E_1\hat j - E_2\hat i \), so \( \vec B = \dfrac{1}{c}(E_1\hat j - E_2\hat i)\cos(kz-\omega t) \). Option (a) is correct. Option (b) is not perpendicular to E: \( (E_1\hat i+E_2\hat j)\cdot(E_1\hat i - E_2\hat j) = E_1^{2}-E_2^{2} \neq 0 \) in general.
3. The two components of E have the same phase, so the tip of the E vector moves back and forth along a fixed straight line. The wave is plane (linearly) polarised, so (d) is correct and (c) is wrong.
Teacher's Note:
1. B is perpendicular to both E and the direction of propagation: check with the dot product E · B = 0.
2. Circular polarisation needs two perpendicular components that differ in phase by 90°. Here the phase is the same.
Examination Note: Obtain B from k̂ × E, check that E · B = 0 and give the reason for plane polarisation (the two components are in phase).
Multiple Choice Questions (More Than One Options)
(a) The associated magnetic field is given as \( \vec B = \dfrac{1}{c}\hat k\times\vec E = \dfrac{1}{\omega}(\vec k\times\vec E) \)
(b) The electromagnetic field can be written in terms of the associated magnetic field as \( \vec E = c\,(\vec B\times\hat k) \)
(c) \( \hat k\cdot\vec E = 0,\ \hat k\cdot\vec B = 0 \)
(d) \( \hat k\times\vec E = 0,\ \hat k\times\vec B = 0 \)
Show Answer & Explanation
Answer: (a) The associated magnetic field is given as \( \vec B = \dfrac{1}{c}\hat k\times\vec E = \dfrac{1}{\omega}(\vec k\times\vec E) \), (b) The electromagnetic field can be written in terms of the associated magnetic field as \( \vec E = c\,(\vec B\times\hat k) \), (c) \( \hat k\cdot\vec E = 0,\ \hat k\cdot\vec B = 0 \)
Explanation:
1. The wave travels along \( \hat k \), so E and B are perpendicular to \( \hat k \) and to each other, and \( B_0 = E_0/c \).
2. (a) \( \vec B = \dfrac{1}{c}\hat k\times\vec E \). Since \( \vec k = k\hat k \) and \( \omega = ck \), \( \dfrac{1}{\omega}(\vec k\times\vec E) = \dfrac{1}{c}\hat k\times\vec E \). Correct.
3. (b) \( \vec B\times\hat k = \dfrac1c(\hat k\times\vec E)\times\hat k = \dfrac1c\left[\vec E - \hat k(\hat k\cdot\vec E)\right] = \dfrac{\vec E}{c} \), so \( \vec E = c(\vec B\times\hat k) \). Correct.
4. (c) \( \hat k\cdot\vec E = 0 \) and \( \hat k\cdot\vec B = 0 \) because the angle between \( \hat k \) and each field is 90°. Correct.
5. (d) The cross products \( \hat k\times\vec E \) and \( \hat k\times\vec B \) are not zero, since E and B are perpendicular to \( \hat k \) (they would be zero only for parallel vectors). Wrong.
Teacher's Note:
1. Dot product zero means perpendicular; cross product zero means parallel. A transverse wave has E, B ⟂ k.
2. These relations are the vector way of saying B = E/c and the wave is transverse.
Examination Note: Work through the four options one by one with dot and cross products. Correct options need a line of proof, and wrong ones need the reason.
(a) Ex, By
(b) Ey, Bz
(c) Bx, Ey
(d) Ez, By
Show Answer & Explanation
Answer: (b) Ey, Bz, (d) Ez, By
Explanation:
1. E and B are perpendicular to each other and to the direction of propagation, so for a wave along the x-direction both must lie in the y-z plane (components along y or z only).
2. Options (a) and (c) contain an x-component of E or B, so they are not allowed.
3. (b) \( \hat j\times\hat k = \hat i \): the wave travels along +x. (d) \( \hat k\times\hat j = -\hat i \): the wave travels along −x. Both are waves along the x-direction, so (b) and (d) are correct.
Teacher's Note:
1. A plane EM wave has no field component along its direction of travel.
2. E × B gives the sense of travel; a reversed pair gives the wave moving the other way along the same axis.
Examination Note: State that E and B must lie in the y-z plane and check the cross product of each pair for the sense of propagation.
(a) will have frequency of 109 Hz
(b) will have frequency of 2 × 109 Hz
(c) will have wavelength of 0.3 m
(d) fall in the region of radiowaves
Show Answer & Explanation
Answer: (a) will have frequency of 109 Hz, (c) will have wavelength of 0.3 m, (d) fall in the region of radiowaves
Explanation:
1. An oscillating charge radiates waves of the same frequency as its oscillation: \( \nu = 10^{9}\ \text{Hz} \). (a) is correct and (b) is wrong.
2. Wavelength: \( \lambda = \dfrac{c}{\nu} = \dfrac{3\times10^{8}}{10^{9}} = 0.3\ \text{m} \). (c) is correct.
3. A wavelength of 0.3 m (longer than 0.1 m) is in the radio-wave region of the spectrum. (d) is correct.
Teacher's Note:
1. The frequency of the radiated wave equals the frequency of the oscillating source.
2. Radio waves have wavelengths above about 0.1 m; microwaves lie between 1 mm and 0.1 m.
Examination Note: Give the frequency, then calculate λ = c/ν and place it on the spectrum. All three steps are needed.
(a) moving with a constant velocity
(b) moving in a circular orbit
(c) at rest
(d) falling in an electric field
Show Answer & Explanation
Answer: (b) moving in a circular orbit, (d) falling in an electric field
Explanation:
1. Electromagnetic waves are produced by accelerated (or oscillating) charges.
2. (b) A charge in circular motion changes the direction of its velocity continuously, so it is accelerated. Correct.
3. (d) A charge falling in an electric field accelerates. Correct.
4. (a) A charge moving with constant velocity has no acceleration, and (c) a charge at rest gives only a static electric field, so these do not radiate.
Teacher's Note:
1. Acceleration includes a change in direction, even at constant speed.
2. A steady current (charges at constant velocity) produces a static magnetic field, not an electromagnetic wave.
Examination Note: Quote the condition (an accelerated charge radiates) and apply it option by option.
(a) Radiation pressure is \( \dfrac{I}{c} \) if the wave is totally absorbed
(b) Radiation pressure is \( \dfrac{I}{c} \) if the wave is totally reflected
(c) Radiation pressure is \( \dfrac{2I}{c} \) if the wave is totally reflected
(d) Radiation pressure is in the range \( \dfrac{I}{c} < p < \dfrac{2I}{c} \) for real surfaces
Show Answer & Explanation
Answer: (a) Radiation pressure is \( \dfrac{I}{c} \) if the wave is totally absorbed, (c) Radiation pressure is \( \dfrac{2I}{c} \) if the wave is totally reflected, (d) Radiation pressure is in the range \( \dfrac{I}{c} < p < \dfrac{2I}{c} \) for real surfaces
Explanation:
1. The momentum of the wave arriving per unit time per unit area is \( I/c \). The radiation pressure is the change of momentum per unit time per unit area.
2. Total absorption: the final momentum is zero, so \( p = \dfrac{I}{c} - 0 = \dfrac{I}{c} \). (a) is correct.
3. Total reflection: the momentum reverses from \( +I/c \) to \( -I/c \), so \( p = \dfrac{I}{c} - \left(-\dfrac{I}{c}\right) = \dfrac{2I}{c} \). (c) is correct and (b) is wrong.
4. A real surface absorbs part of the wave and reflects part, so its pressure lies between I/c and 2I/c. (d) is correct.
Teacher's Note:
1. Radiation pressure is just change of momentum: for reflection the change is twice as big as for absorption.
2. This is the same idea as a ball that sticks to a wall versus a ball that bounces back elastically.
Examination Note: Compare the initial and final momentum for each case. The result p = I/c for absorption and 2I/c for reflection should be shown with the change of momentum.
Very Short Answer Type Questions
Question 14. Why is the orientation of the portable radio with respect to broadcasting station important?
Answer:
Radio waves are electromagnetic waves, and they are plane polarised: the electric field of the wave vibrates in one fixed direction.
A rod antenna responds best when it is parallel to the electric field of the wave. If the antenna is at right angles to the vibration, the wave induces very little signal.
Hence the radio must be oriented so that its antenna is parallel to the vibration of the electric field of the wave.
In simple words: The broadcast waves vibrate in one direction only, so the antenna must be lined up with that direction to pick up the strongest signal.
Teacher's Note:
1. A rod antenna is an electric-field detector: the field must have a component along the rod to move charges in it.
2. The same reasoning explains why you turn a television antenna to improve reception.
Examination Note: Use the term "plane polarised" and state the direction of the antenna relative to the electric field.
Question 15. Why does microwave oven heats up a food item containing water molecules most efficiently?
Answer:
Water molecules are polar and have a natural frequency of rotation of about the same value as the microwave frequency used in the oven (about 2.45 GHz).
When the microwaves have this frequency, the water molecules absorb energy from the oscillating electric field most strongly and rotate with larger amplitude.
This energy is passed on to the neighbouring molecules as thermal energy, which heats the food. So a food item with water heats up most efficiently.
In simple words: The oven's microwaves match the natural frequency of water molecules, so the water absorbs the energy strongly and the food heats up quickly.
Teacher's Note:
1. Dry materials such as plates and glass have no such matching frequency, so they absorb little energy.
2. The energy absorbed by the rotating molecules becomes random thermal motion, which we feel as heat.
Examination Note: State that the microwave frequency matches the natural frequency of water molecules, and then say that energy absorption increases the thermal energy.
Question 16. The charge on a parallel plate capacitor varies as q = q0 cos 2πνt. The plates are very large and close together (area = A, separation = d). Neglecting the edge effects, find the displacement current through the capacitor.
Answer:
The displacement current in the gap equals the conduction current that charges the capacitor: \( I_d = I_c = \dfrac{dq}{dt} \).
\( I_d = \dfrac{d}{dt}(q_0\cos2\pi\nu t) = -2\pi\nu q_0\sin2\pi\nu t \).
Id = −2πν q0 sin 2πνt. The magnitude of the peak value is 2πν q0.
In simple words: The displacement current in the gap has the same value as the current in the wires, so it is simply the rate of change of the charge on the plates.
Teacher's Note:
1. Displacement current is ε0 dΦE/dt. For a capacitor ΦE = q/ε0, so Id = dq/dt.
2. The minus sign comes from differentiating a cosine.
Examination Note: Link Id to dq/dt in one line (continuity of current) and differentiate. The area and separation are not needed.
Question 17. A variable frequency AC source is connected to a capacitor. How will the displacement current change with decrease in frequency?
Answer:
The displacement current in the gap is equal to the conduction current in the circuit, \( I_d = I_c \).
The capacitive reactance is \( X_C = \dfrac{1}{2\pi fC} \), and the current is \( I = \dfrac{V}{X_C} = 2\pi fCV \), proportional to f.
When the frequency decreases, XC increases and the current decreases, so the displacement current decreases (in proportion to the frequency).
In simple words: A capacitor passes less current at low frequency, and the displacement current is the same as that current, so it falls with the frequency.
Teacher's Note:
1. As f → 0 (DC) a capacitor blocks current and the displacement current is zero.
2. Displacement current exists only while the electric field between the plates is changing; a slower change gives a smaller current.
Examination Note: Use Id = Ic = V/XC and give the proportionality to f in the final line.
Question 18. The magnetic field of a beam emerging from a filter facing a floodlight is given by B0 = 12 × 10−8 sin(1.20 × 107 z − 3.60 × 1015 t) T. What is the average intensity of the beam?
Answer:
Compare with the standard form \( B = B_0\sin(kz-\omega t) \): the amplitude is \( B_0 = 12\times10^{-8}\ \text{T} \).
Average intensity: \( I_{av} = \dfrac{1}{2}\dfrac{B_0^{2}}{\mu_0}\,c \).
\( I_{av} = \dfrac{1}{2}\times\dfrac{(12\times10^{-8})^{2}\times3\times10^{8}}{4\pi\times10^{-7}} = \dfrac{4.32\times10^{-6}}{2.513\times10^{-6}} \approx 1.72\ \text{W/m}^2 \)
Iav ≈ 1.72 W/m²
In simple words: Only the amplitude B0 is needed. The rest of the formula is for the average intensity of a plane wave.
Teacher's Note:
1. The ratio ω/k = 3.6 × 1015 / 1.2 × 107 = 3 × 108 m/s confirms that this is a wave travelling at the speed of light.
2. Intensity = (average energy density) × c. The average energy density is B0²/(2μ0), made up of equal electric and magnetic parts, so I = B0²c/(2μ0).
Examination Note: Write the formula I = B0²c/(2μ0), substitute and give the unit W/m².
Answer:
Let the wave travel along the x-axis with \( \vec E = E_0\sin(\omega t - kx)\,\hat j \) and \( \vec B = B_0\sin(\omega t - kx)\,\hat k \), so \( \vec E\times\vec B \) points along \( \hat i \).
\( \vec S = \dfrac{1}{\mu_0}\vec E\times\vec B = \dfrac{E_0B_0}{\mu_0}\sin^{2}(\omega t - kx)\,(\hat j\times\hat k) = \dfrac{E_0B_0}{\mu_0}\sin^{2}(\omega t - kx)\,\hat i \).
Because of the \( \sin^{2} \) factor, S is never negative: it varies between 0 and \( E_0B_0/\mu_0 \), always along the direction of propagation. It has twice the frequency of E and B (period T/2 where \( T = 2\pi/\omega \)) and an average value \( \dfrac{E_0B_0}{2\mu_0} \).
The graph of S against t is a series of positive humps (a sin² curve) with period T/2, drawn in the figure together with E and B.
In simple words: The energy flow in a wave is always forward, never backward, and it pulsates at twice the wave frequency.
Teacher's Note:
1. E and B reach zero and their maximum values together, so the product E × B is always positive.
2. The average of sin² over a cycle is 1/2, which gives the average intensity E0B0/2μ0.
Examination Note: Derive S as a sin² function, draw the graph with the x-axis marked in terms of T, and state the average value.
Question 20. Professor C.V. Raman surprised his students by suspending freely a tiny light ball in a transparent vacuum chamber by shining a laser beam on it. Which property of EM waves was he exhibiting? Give one more example of this property.
Answer:
An electromagnetic wave carries energy and also momentum, like other waves. Because it carries momentum, it exerts a pressure, called radiation pressure, on a surface on which it falls.
The upward radiation pressure of the laser beam balanced the weight of the tiny ball, so the ball stayed suspended in the chamber. The property exhibited is the radiation pressure (momentum) of electromagnetic waves.
Another example: the tails of comets point away from the Sun because of the radiation pressure of sunlight on the dust and gas particles.
In simple words: Light carries momentum, so a strong beam can push on an object hard enough to balance its weight.
Teacher's Note:
1. The pressure is very small, which is why a very intense beam like a laser is needed.
2. Radiation pressure for a perfectly absorbing surface is I/c.
Examination Note: Name the property (radiation pressure, from the momentum of the wave) and give one clear example such as the tail of a comet.
Short Answer Type Questions
Answer:
Take a circular loop of radius r (r less than the radius of the plates) between the plates, with its centre on the axis of the plates. By symmetry the field B has the same magnitude all along the loop and is tangential to it.
Apply Ampere-Maxwell law to the loop. There is no conduction current in the gap, so \( \oint\vec B\cdot d\vec l = \mu_0 I_d = \mu_0\varepsilon_0\dfrac{d\Phi_E}{dt} \).
The flux of the electric field through the flat surface bounded by the loop is \( \Phi_E = E\,(\pi r^{2}) \), since E is uniform and perpendicular to this surface.
\( B\,(2\pi r) = \mu_0\varepsilon_0\,\pi r^{2}\,\dfrac{dE}{dt} \)
B = (μ0ε0 r / 2) dE/dt
In simple words: A changing electric field between the plates acts like a current and produces a circular magnetic field around the axis, which grows in proportion to r.
Teacher's Note:
1. The loop B · dl is B × 2πr because B is the same at every point of a circle around the axis.
2. Only the flux through the disc inside the loop counts, which is E times πr².
Examination Note: Name the law (Ampere-Maxwell), state that conduction current is zero in the gap and show the flux through the loop's disc.
Question 22. Electromagnetic waves with wavelength (i) λ1 is used in satellite communication. (ii) λ2 is used to kill germs in water purifiers. (iii) λ3 is used to detect leakage of oil in underground pipelines. (iv) λ4 is used to improve visibility on runways during fog and mist conditions. (a) Identify and name the part of electromagnetic spectrum to which these radiations belong. (b) Arrange these wavelengths in ascending order of their magnitude. (c) Write one more application of each.
Answer:
(a) (i) λ1 is the wavelength of microwaves (satellite communication). (ii) λ2 belongs to ultraviolet rays (killing germs). (iii) λ3 belongs to X-rays (the very-short-wavelength radiation used in industrial radiography; gamma rays are also used for this). (iv) λ4 belongs to infrared rays, which pass through fog and mist better than visible light.
(b) Wavelength of X-rays < wavelength of ultraviolet rays < wavelength of infrared rays < wavelength of microwaves, so λ3 < λ2 < λ4 < λ1.
(c) Another application of each: (i) microwaves are used in radar; (ii) ultraviolet rays are used in LASIK eye surgery; (iii) X-rays are used to detect fractures in bones; (iv) infrared rays are used in optical (fibre) communication and in remote controls.
In simple words: Match each use with its region of the spectrum and then arrange them in order of wavelength: X-rays are the shortest and microwaves the longest of the four.
Teacher's Note:
1. The spectrum from short to long wavelength is: gamma rays, X-rays, ultraviolet, visible, infrared, microwaves, radio waves.
2. Longer wavelengths scatter less, which is why infrared helps in fog.
Examination Note: List the four names with a one-word reason for each, then give the order of wavelengths with the < signs, and then the extra uses.
Question 23. Show that average value of radiant flux density S over a single period T is given by \( S = \dfrac{1}{2c\mu_0}E_0^{2} \).
Answer:
Radiant flux density (Poynting vector) is \( S = \dfrac{1}{\mu_0}\,\vec E\times\vec B \). Take a wave along the x-axis with \( \vec E = E_0\cos(kx-\omega t)\,\hat j \) and \( \vec B = B_0\cos(kx-\omega t)\,\hat k \).
The magnitude is \( S = \dfrac{E_0B_0}{\mu_0}\cos^{2}(kx-\omega t) \).
Average over one period: \( \dfrac{1}{T}\int_0^{T}\cos^{2}(kx-\omega t)\,dt = \dfrac{1}{2} \), so \( S_{av} = \dfrac{E_0B_0}{2\mu_0} \).
Using \( B_0 = \dfrac{E_0}{c} \): \( S_{av} = \dfrac{E_0^{2}}{2c\mu_0} \).
Sav = E0² / (2μ0c). Hence proved.
In simple words: The flux density of a wave pulsates as cos²; its average is half the peak, and the peak is E0B0/μ0.
Teacher's Note:
1. The average of cos² or sin² over a full period is exactly 1/2.
2. Replace B0 by E0/c to express the result in terms of the electric field alone.
Examination Note: Show the average of cos² over a period and use B0 = E0/c at the end. This earns the full marks for the proof.
Question 24. You are given a 2 μF parallel plate capacitor. How would you establish an instantaneous displacement current of 1 mA in the space between its plates?
Answer:
The displacement current in the gap equals the conduction current in the circuit: \( I_d = \dfrac{dq}{dt} \). With \( q = CV \): \( I_d = C\dfrac{dV}{dt} \).
\( 1\times10^{-3} = 2\times10^{-6}\times\dfrac{dV}{dt} \)
\( \dfrac{dV}{dt} = \dfrac{1\times10^{-3}}{2\times10^{-6}} = 500\ \text{V/s} \)
The potential difference across the capacitor must be changed at the rate of 500 V/s (for example, by a source whose voltage increases uniformly by 500 volts every second).
In simple words: A displacement current of 1 mA flows when the voltage on the 2 μF capacitor changes steadily at 500 volts per second.
Teacher's Note:
1. The displacement current exists only while the voltage (and hence E) is changing.
2. This is the same current that would be measured in the wires connected to the capacitor.
Examination Note: Start from Id = C dV/dt, substitute the numbers with the units of μF and mA converted, and state the rate in V/s.
Question 25. Show that the radiation pressure exerted by an EM wave of intensity I on a surface kept in vacuum is I/c.
Answer:
Assume that the wave is completely absorbed by a surface of area A. In a time \( dt \) the energy absorbed is \( U = I\,A\,dt \).
The momentum carried by an energy U is \( p = \dfrac{U}{c} \). The surface gains this momentum, so the force on it is \( F = \dfrac{dp}{dt} = \dfrac{1}{c}\dfrac{U}{dt} = \dfrac{IA}{c} \).
Radiation pressure \( = \dfrac{F}{A} = \dfrac{I}{c} \).
Radiation pressure = I/c (for a totally reflecting surface it is 2I/c).
In simple words: Light carrying energy U also carries momentum U/c, and the force on the surface is the rate at which this momentum is delivered.
Teacher's Note:
1. Force is the rate of change of momentum, and pressure is force per unit area.
2. If the surface reflects the wave, the momentum change is doubled, so the pressure is 2I/c.
Examination Note: Use three equations: U = IA dt, p = U/c and F = dp/dt, and finish with pressure = F/A. State the assumption of complete absorption.
Question 26. What happens to the intensity of light from a bulb if the distance from the bulb is doubled? As a laser beam travels across the length of a room, its intensity essentially remains constant. What geometrical characteristic of LASER beam is responsible for the constant intensity which is missing in the case of light from the bulb?
Answer:
Light from a bulb spreads out in all directions, so the power is spread over a sphere of area \( 4\pi r^{2} \). The intensity is \( I = \dfrac{P}{4\pi r^{2}} \propto \dfrac{1}{r^{2}} \).
If the distance is doubled, the area becomes four times, so the intensity becomes one-fourth of its initial value.
A laser beam does not spread: all the waves travel along the same direction in a very narrow beam. This geometrical characteristic is the high directionality (collimation) of the laser beam. Because the beam does not spread, the area over which the power is distributed stays almost the same, so the intensity is constant. (Its monochromatic and coherent nature is the reason the beam stays narrow.)
In simple words: Intensity falls as the square of the distance for a spreading source, but a laser beam stays as a thin parallel beam, so it does not fall off over a room's length.
Teacher's Note:
1. Intensity is power per unit area, so it stays constant when the area stays constant.
2. Spherical wavefronts from a bulb; almost plane wavefronts for a laser.
Examination Note: Give the inverse-square result for the bulb and name the property "highly collimated, unidirectional beam" for the laser.
Question 27. Even though an electric field E exerts a force qE on a charged particle yet electric field of an EM wave does not contribute to the radiation pressure (but transfers energy). Explain.
Answer:
The electric field of an EM wave oscillates sinusoidally, and so does the electric force \( qE \) on a charge. Its direction reverses every half cycle, so its average over an integral number of cycles is zero. The electric field therefore gives no net push on the charge, only energy (the charge oscillates and gains kinetic energy).
The radiation pressure comes from the magnetic field. The electric field makes the charge move with velocity v, and then the magnetic force \( q\,\vec v\times\vec B \) acts on it. For the charged particle, this force is along the direction of propagation of the wave, and its average over a cycle is not zero.
Hence the net force on the charge (radiation pressure) comes from the magnetic force, while the electric field transfers energy.
In simple words: The electric force alternates in direction and averages to zero, but the magnetic force on the moving charge is always in the forward direction of the wave.
Teacher's Note:
1. Energy transfer needs a force along the velocity (work = F · v), which the electric force provides.
2. The magnetic force does no work, but it carries the momentum in the direction of the wave.
Examination Note: Mention that the average of the electric force over a cycle is zero and name the magnetic force as the source of the radiation pressure.
Long Answer Type Questions
Answer:
At a perpendicular distance a from the wire, the electric field of the line charge is radial: \( \vec E = \dfrac{\lambda}{2\pi\varepsilon_0 a}\,\hat s \), where \( \hat s \) is the radial unit vector.
The moving charge is a current \( I = \lambda v \) along +z. Its magnetic field is circular: \( \vec B = \dfrac{\mu_0 I}{2\pi a}\,\hat\phi = \dfrac{\mu_0\lambda v}{2\pi a}\,\hat\phi \).
Check at the point on the y-axis, (0, a, 0): \( \hat s = \hat j \) and \( \hat\phi = -\hat i \), so \( \vec E = \dfrac{\lambda}{2\pi\varepsilon_0 a}\hat j \) and \( \vec B = -\dfrac{\mu_0\lambda v}{2\pi a}\hat i \).
\( \vec S = \dfrac{1}{\mu_0}\left(\vec E\times\vec B\right) = \dfrac{1}{\mu_0}\cdot\dfrac{\lambda}{2\pi\varepsilon_0 a}\cdot\dfrac{\mu_0\lambda v}{2\pi a}\,(\hat j\times(-\hat i)) = \dfrac{\lambda^{2}v}{4\pi^{2}\varepsilon_0 a^{2}}\,\hat k \)
S = λ²v / (4π²ε0a²) along +z: the energy flows parallel to the velocity of the wire, and the magnitude falls as 1/a².
In simple words: The wire creates a radial electric field and a circular magnetic field. Their cross product gives an energy flow along the direction in which the wire moves.
Teacher's Note:
1. The direction of B for a current along +z is given by the right-hand rule: counterclockwise as seen from the +z side.
2. S = E × B / μ0 is an energy flux. The result is positive along z, so the energy is carried along the wire.
Examination Note: Write E and B at the same point with their directions, take the cross product with the correct sign and give the direction of S.
Question 29. Sea water at frequency ν = 4 × 108 Hz has permittivity ε ≈ 80 ε0, permeability μ ≈ μ0 and resistivity ρ = 0.25 Ω m. Imagine a parallel plate capacitor immersed in sea water and driven by an alternating voltage source V(t) = V0 sin(2πνt). What fraction of the conduction current density is the displacement current density?
Answer:
Let d be the separation of the plates. The electric field between the plates is \( E = \dfrac{V_0}{d}\sin(2\pi\nu t) \).
Conduction current density (Ohm's law): \( J_c = \dfrac{E}{\rho} = \dfrac{V_0}{\rho d}\sin(2\pi\nu t) \), with amplitude \( J_{c0} = \dfrac{V_0}{\rho d} \).
Displacement current density: \( J_d = \varepsilon\dfrac{dE}{dt} = \dfrac{2\pi\nu\varepsilon V_0}{d}\cos(2\pi\nu t) \), with amplitude \( J_{d0} = \dfrac{2\pi\nu\varepsilon V_0}{d} \).
\( \dfrac{J_{d0}}{J_{c0}} = 2\pi\nu\varepsilon\rho = 2\pi\times(4\times10^{8})\times(80\times8.85\times10^{-12})\times0.25 \approx 0.44 \)
The displacement current density is about 0.44 (about 4/9) of the conduction current density (as amplitudes; the two are 90° out of phase).
In simple words: In sea water at this frequency the displacement current is about 44 per cent of the conduction current, so both matter, and the conduction current is the larger.
Teacher's Note:
1. Conduction current follows E (in phase), and displacement current follows dE/dt, so they are a quarter cycle apart.
2. In a good conductor the ratio 2πνερ is very small, so displacement current is negligible there; in a good insulator it is very large.
Examination Note: Write both current densities, take the ratio of the amplitudes and substitute the numbers. Give the answer as a fraction or decimal.
Question 30. A long straight cable of length l is placed symmetrically along z-axis and has radius a (<< l). The cable consists of a thin wire and a co-axial conducting tube. An alternating current I(t) = I0 sin(2πνt) flows down the central thin wire and returns along the co-axial conducting tube. The induced electric field at a distance s from the wire inside the cable is \( \vec E(s,t) = \mu_0I_0\nu\cos(2\pi\nu t)\ln\left(\dfrac{s}{a}\right)\hat k \). (i) Calculate the displacement current density inside the cable. (ii) Integrate the displacement current density across the cross-section of the cable to find the total displacement current Id. (iii) Compare the conduction current I0 with the displacement current I0d.
Answer:
(i) \( \vec J_d = \varepsilon_0\dfrac{\partial\vec E}{\partial t} = \varepsilon_0\mu_0I_0\nu\ln\left(\dfrac{s}{a}\right)\dfrac{d}{dt}\left[\cos2\pi\nu t\right]\hat k = -2\pi\varepsilon_0\mu_0I_0\nu^{2}\sin(2\pi\nu t)\ln\left(\dfrac{s}{a}\right)\hat k \).
With \( \varepsilon_0\mu_0 = \dfrac{1}{c^{2}} \) and \( \lambda = \dfrac{c}{\nu} \) (so \( \dfrac{\nu^{2}}{c^{2}} = \dfrac{1}{\lambda^{2}} \)), and \( -\ln\dfrac{s}{a} = \ln\dfrac{a}{s} \):
\( \vec J_d = \dfrac{2\pi I_0}{\lambda^{2}}\ln\left(\dfrac{a}{s}\right)\sin(2\pi\nu t)\,\hat k \)
(ii) Total displacement current through the circular cross-section: \( I_d = \int_0^{a}J_d\,(2\pi s)\,ds = \dfrac{4\pi^{2}I_0}{\lambda^{2}}\sin(2\pi\nu t)\int_0^{a}s\ln\left(\dfrac{a}{s}\right)ds \).
With \( \int_0^{a}s\ln\left(\dfrac{a}{s}\right)ds = \dfrac{a^{2}}{4} \) (put \( s = au \) and use \( \int_0^1 -u\ln u\,du = \tfrac14 \)):
\( I_d = \dfrac{4\pi^{2}I_0}{\lambda^{2}}\cdot\dfrac{a^{2}}{4}\sin(2\pi\nu t) = \left(\dfrac{\pi a}{\lambda}\right)^{2}I_0\sin(2\pi\nu t) \)
(iii) The amplitude of the displacement current is \( I_0^{d} = \left(\dfrac{\pi a}{\lambda}\right)^{2}I_0 \), so \( \dfrac{I_0^{d}}{I_0} = \left(\dfrac{\pi a}{\lambda}\right)^{2} \). Since \( a \ll l \) and the dimensions of the cable are small compared with the wavelength, \( \pi a/\lambda \ll 1 \), the displacement current is very small compared with the conduction current.
In simple words: The displacement current inside the cable is only a tiny fraction (πa/λ)² of the conduction current when the cable is thin compared with the wavelength.
Teacher's Note:
1. The displacement current density is ε0 ∂E/∂t; differentiate only the time factor.
2. The cross-section is a circle, so the area element is 2πs ds and the limits run from 0 to a.
Examination Note: Present (i), (ii) and (iii) with the working shown, give the integral of s ln(a/s) and compare the two amplitudes at the end.
(i) Evaluate \( \oint\vec E\cdot d\vec l \) over the rectangular loop 1234 shown in figure. (ii) Evaluate \( \int\vec B\cdot d\vec s \) over the surface bounded by loop 1234. (iii) Use equation \( \oint\vec E\cdot d\vec l = -\dfrac{d\phi_B}{dt} \) to prove \( \dfrac{E_0}{B_0} = c \). (iv) By using similar process and the equation \( \oint\vec B\cdot d\vec l = \mu_0I + \varepsilon_0\mu_0\dfrac{d\phi_E}{dt} \), prove that \( c = \dfrac{1}{\sqrt{\mu_0\varepsilon_0}} \).
Answer:
The loop 1234 lies in the x-z plane, with corners 1 and 2 at \( z_1 \) and \( z_2 \) on the z-axis and 3, 4 at a height h along x. Go round the loop in the order 1 → 2 → 3 → 4 → 1.
(i) E is along x. Along the sides 1→2 and 3→4 (parallel to z), \( \vec E\cdot d\vec l = 0 \). Along 2→3 (upwards, along +x), \( \int E\,dl = E_0h\sin(kz_2-\omega t) \). Along 4→1 (downwards), \( \int E\,dl = -E_0h\sin(kz_1-\omega t) \). So \( \oint\vec E\cdot d\vec l = E_0h\left[\sin(kz_2-\omega t) - \sin(kz_1-\omega t)\right] \).
(ii) B is along y, perpendicular to the plane of the loop. Divide the surface into strips of area \( h\,dz \): \( \int\vec B\cdot d\vec s = \int_{z_1}^{z_2}B_0\sin(kz-\omega t)\,h\,dz = -\dfrac{B_0h}{k}\left[\cos(kz_2-\omega t) - \cos(kz_1-\omega t)\right] \).
(iii) Faraday's law: \( \oint\vec E\cdot d\vec l = -\dfrac{d\phi_B}{dt} \). Differentiate the result of (ii): \( -\dfrac{d\phi_B}{dt} = \dfrac{B_0h\omega}{k}\left[\sin(kz_2-\omega t) - \sin(kz_1-\omega t)\right] \). Equating with (i): \( E_0 = \dfrac{B_0\omega}{k} = B_0c \), so \( \dfrac{E_0}{B_0} = c \), since \( \omega/k = c \).
(iv) Now take a similar loop 1234 in the y-z plane (corners at \( z_1 \), \( z_2 \), with sides of length h along y). B is along y and E is along x, perpendicular to this loop. Going round 1 → 2 → 3 → 4, only the sides parallel to y contribute: \( \oint\vec B\cdot d\vec l = B_0h\left[\sin(kz_2-\omega t) - \sin(kz_1-\omega t)\right] \).
The flux of E through the loop (the direction of the area is along −x for this sense of traversal) is \( \phi_E = \dfrac{E_0h}{k}\left[\cos(kz_2-\omega t) - \cos(kz_1-\omega t)\right] \), so \( \dfrac{d\phi_E}{dt} = \dfrac{E_0h\omega}{k}\left[\sin(kz_2-\omega t) - \sin(kz_1-\omega t)\right] \).
There is no conduction current in vacuum (I = 0), so \( \oint\vec B\cdot d\vec l = \mu_0\varepsilon_0\dfrac{d\phi_E}{dt} \). Hence \( B_0 = \mu_0\varepsilon_0E_0\dfrac{\omega}{k} = \mu_0\varepsilon_0E_0c \), that is, \( \dfrac{E_0}{B_0} = \dfrac{1}{\mu_0\varepsilon_0 c} \).
Using \( \dfrac{E_0}{B_0} = c \) from (iii): \( c = \dfrac{1}{\mu_0\varepsilon_0c} \Rightarrow c^{2} = \dfrac{1}{\mu_0\varepsilon_0} \), so \( c = \dfrac{1}{\sqrt{\mu_0\varepsilon_0}} \).
In simple words: Faraday's law applied to a loop in the x-z plane gives E0 = cB0, and the Ampere-Maxwell law applied to a loop in the y-z plane gives c = 1/√(μ0ε0).
Teacher's Note:
1. A loop is chosen so that the field being integrated lies along its sides, and the other field passes through its area.
2. The two laws together show that the speed of the wave is fixed by μ0 and ε0, which is how Maxwell predicted that light is an EM wave.
Examination Note: Follow the same steps for both loops: the line integral, the flux, the differentiation and the law. Say which loop you use and the direction of travel round it, since the signs depend on it.
Question 32. A plane EM wave travelling along z-direction is described by E = E0 sin(kz − ωt) î and B = B0 sin(kz − ωt) ĵ. Show that (i) the average energy density of the wave is given by \( u_{av} = \dfrac14\varepsilon_0E_0^{2} + \dfrac14\dfrac{B_0^{2}}{\mu_0} \) (ii) the time averaged intensity of the wave is given by \( I_{av} = \dfrac12c\varepsilon_0E_0^{2} \).
Answer:
(i) The energy density in the electric field is \( u_E = \dfrac12\varepsilon_0E^{2} \) and in the magnetic field \( u_B = \dfrac{B^{2}}{2\mu_0} \), so the total energy density is \( u = \dfrac12\varepsilon_0E^{2} + \dfrac{B^{2}}{2\mu_0} \).
With \( E = E_0\sin(kz-\omega t) \), the time average of \( E^{2} \) over a cycle is \( \dfrac{E_0^{2}}{2} \) and that of \( B^{2} \) is \( \dfrac{B_0^{2}}{2} \) (the average of sin² is 1/2).
\( u_{av} = \dfrac12\varepsilon_0\cdot\dfrac{E_0^{2}}{2} + \dfrac{1}{2\mu_0}\cdot\dfrac{B_0^{2}}{2} = \dfrac14\varepsilon_0E_0^{2} + \dfrac14\dfrac{B_0^{2}}{\mu_0} \)
(ii) Using \( E_0 = cB_0 \) and \( c^{2} = \dfrac{1}{\mu_0\varepsilon_0} \): \( \dfrac{B_0^{2}}{4\mu_0} = \dfrac{E_0^{2}}{4c^{2}\mu_0} = \dfrac14\varepsilon_0E_0^{2} \). So the magnetic part equals the electric part.
\( u_{av} = \dfrac14\varepsilon_0E_0^{2} + \dfrac14\varepsilon_0E_0^{2} = \dfrac12\varepsilon_0E_0^{2} \)
The intensity is the energy density multiplied by the speed of the wave: \( I_{av} = u_{av}\,c = \dfrac12\,c\,\varepsilon_0E_0^{2} \)
Iav = ½ c ε0 E0². Hence proved.
In simple words: The energy of the wave is equally divided between the electric and magnetic fields, and the intensity is that energy density times the speed of light.
Teacher's Note:
1. The factor 1/2 in the average comes from the average of sin² over a period, and the factor appears once for each field.
2. Intensity is the energy crossing unit area per second, which is the energy density times the speed of the wave.
Examination Note: Show both averages, prove that the two parts are equal and then multiply by c. State the steps (i) and (ii) with separate labels.