Xam Idea Solutions Class 12 Physics Chapter 7 Alternating Current Very Short Answer Questions

Step-by-Step Solutions for Class 12 Physics Chapter 07 Alternating Current

Explore reliable textbook solutions for Chapter 07 Alternating Current tailored for Class 12 learners using methodologies. Utilizing these Physics answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.

Download Chapter 07 Alternating Current Textbook Solutions PDF

Access the complete solution PDF for Class 12 Physics below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

Very Short Answer Questions

Question 1. Explain why current flows through an ideal capacitor when it is connected to an ac source but not when it is connected to a dc source in a steady state. [CBSE (East) 2016]

Solution.

For ac source, circuit is complete due to the presence of displacement current in the capacitor. For steady dc, there is no displacement current, therefore, circuit is not complete.

Mathematically, capacitive reactance XC = 1/ωC = 1/2πνC

So, capacitor allows easy path for ac source.

For dc, ν = 0, so Xc = infinity,

So capacitor blocks dc.

Teacher's Note: A capacitor charges and discharges repeatedly under ac, but blocks steady dc.

Exam Note: Use Xc = 1/(omega C).

Question 2. What is wattless current? [CBSE Delhi 2011, Chennai 2015]

Solution.

When pure inductor and/or pure capacitor is connected to ac source, the current flows in the circuit, but with no power loss; the phase difference between voltage and current is π/2. Such a current is called the wattless current.

Teacher's Note: Wattless current flows when voltage and current are ninety degrees apart, with zero average power.

Exam Note: State 90 degrees phase difference.

Question 3. Mention the two characteristic properties of the material suitable for making core of a transformer. [CBSE (AI) 2012]

Solution.

Two characteristic properties:

(i) Low hysteresis loss

(ii) Low coercivity

Teacher's Note: A transformer core needs low hysteresis loss and low coercivity.

Exam Note: Name both properties.

Question 4. Why is the use of AC voltage preferred over DC voltage? Give two reasons. [CBSE (AI) 2014]

Solution.

(i) The generation of AC is more economical than DC.

(ii) Alternating voltage can be stepped up or stepped down as per requirement during transmission from power generating station to the consumer.

(iii) Alternating current in a circuit can be controlled by using wattless devices like the choke coil.

(iv) Alternating voltages can be transmitted from one place to another, with much lower energy loss in the transmission line.

Teacher's Note: ac is cheap to generate and easily transformed for transmission.

Exam Note: Give two reasons.

Question 5. What is the phase difference between voltage and current in a LCR series circuit at resonance?

Solution.

At resonance voltage and current are in the same phase, i.e., phase difference between voltage and current at resonance is zero.

Teacher's Note: At resonance reactances cancel, so the circuit is resistive and voltage and current are in phase.

Exam Note: State phase difference zero.

Question 6. Define capacitor reactance. Write its S.I. units? [CBSE Delhi 2015]

Solution.

The imaginary/virtual resistance offered by a capacitor to the flow of an alternating current is called capacitor reactance, XC = 1/ωC. Its SI unit is ohm.

Teacher's Note: Capacitive reactance falls as frequency or capacitance rises.

Exam Note: Write X_C = 1/(omega C); unit ohm.

Question 7. Define ‘quality factor’ of resonance in series LCR circuit. What is its SI unit? [CBSE Delhi 2016]

Solution.

The quality factor (Q) of series LCR circuit is defined as the ratio of the resonant frequency to frequency band width of the resonant curve.

Q = ωr/(ω2 − ω1) = ωrL/R

Clearly, smaller the value of R, larger is the quality factor and sharper the resonance. Thus quality factor determines the nature of sharpness of resonance.

It has no units.

Teacher's Note: Q measures sharpness of resonance; it is a pure ratio.

Exam Note: State: no units.

Question 8. In a series LCR circuit, VL = VC ≠ VR. What is the value of power factor for this circuit? [CBSE Panchkula 2015]

Solution.

Power factor, cos φ = VR/√(VR2 + (VL − VC)2)

Since VL = VC, cos φ = VR/VR = 1

The value of power factor is 1.

Teacher's Note: Equal V_L and V_C cancel, so the circuit behaves as purely resistive.

Exam Note: Answer: power factor is 1.

Question 9. The power factor of an AC circuit is 0.5. What is the phase difference between voltage and current in this circuit? [CBSE (F) 2015, (South) 2016]

Solution.

Power factor is given by cos φ, where φ is phase difference.

cos φ = 0.5 = 1/2 ⇒ φ = cos−1(1/2) = π/3

Teacher's Note: Invert the cosine of the power factor to get the phase angle.

Exam Note: Answer: pi/3, i.e. 60 degrees.

Question 10. A light bulb and a solenoid are connected in series across an ac source of voltage. Explain, how the glow of the light bulb will be affected when an iron rod is inserted in the solenoid. [CBSE (F) 2017]

Solution.

When iron rod is inserted in the coil, the inductance of coil increases; so impedance of circuit increases and hence, current in circuit, I = V/√(R2 + (ωL)2), decreases.

Consequently, the glow of bulb decreases.

Teacher's Note: Iron core raises L, so reactance and impedance rise and current falls.

Exam Note: Link inductance, impedance and current in order.

Question 11. Sketch a graph showing variation of reactance of a capacitor with frequency in an AC circuit.

Solution.

Capacitive reactance, XC = 1/(2πνC).

The graph of capacitive reactance XC and frequency ν is shown in figure.

XCνO

Teacher's Note: X_C is inversely proportional to frequency, giving a hyperbola.

Exam Note: Draw a falling curve approaching the axis.

Question 12. What will be the effect on inductive reactance XL and capacitive reactance XC if frequency of ac source is increased?

Solution.

The inductive reactance XL = ωL = 2πνL will increase with the increase of frequency ν, while capacitive reactance XC = 1/ωC = 1/2πνC will decrease with the increase of frequency ν.

Teacher's Note: X_L is proportional to frequency; X_C is inversely proportional to it.

Exam Note: State both effects separately.

Question 13. State which of the two, the capacitor or an inductor, tends to become a SHORT when the frequency of the applied alternating voltage has a very high value.

Solution.

The capacitor: XC = 1/ωC = 1/2πνC

When ν → ∞ (very high), XC = 0, so the capacitor acts as a short.

Teacher's Note: Zero reactance means the capacitor offers no opposition at high frequency.

Exam Note: Answer: capacitor, since X_C tends to zero.

Question 14. What is the average value of ac voltage V = V0 sin ωt over the time interval t = 0 to t = π/ω? [HOTS]

Solution.

Vav = ∫V dt / ∫dt = ∫V0 sin ωt dt / [t] = V0{−cos ωt/ω} / (π/ω), limits 0 to π/ω

= −(V0/π)[cos π − cos 0] = 2V0/π

Teacher's Note: Average over half a cycle is nonzero, equal to 2V0/pi.

Exam Note: Integrate sine from 0 to pi/omega.

Question 15. What is the rms value of alternating current shown in figure? [HOTS]

Solution.

2A−2AT/2T3T/20tI

(I2)mean = ∫I2dt / ∫dt = [∫0T/2(2)2dt + ∫T/2T(−2)2dt]/T = ∫0T4 dt/T = 4

Irms = √4 = 2 A

Teacher's Note: Squaring removes the sign, so the mean square is 4.

Exam Note: Answer: 2 A.

Download Xam Idea Solutions for Class 12 Math PDF

Download Xam Idea Solutions for Class 12

Explore reliable mathematical solutions for Xam Idea Solutions Class 12 Physics Chapter 7 Alternating Current Very Short Answer Questions tailored for Class 12 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.

Step-by-Step Mathematical Explanations

Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.

Next Steps in Your Mathematics Revision

Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.

FAQs

What are these [current-page:node:field_author] Solutions for Class 12 Physics?

They are chapter-wise solved questions from the book for Class 12 Physics. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 12 Physics Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 12 Physics?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 12 Physics questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 12 Physics Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.