Xam Idea Solutions Class 12 Physics Chapter 6 Electromagnetic Induction Long Answer Questions

Download Class 12 Physics Textbook Solutions: Chapter 06 Electromagnetic Induction

Explore reliable textbook solutions for Chapter 06 Electromagnetic Induction tailored for Class 12 learners using methodologies. Utilizing these Physics answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.

Access Textbook Answers and Solutions

Navigate directly to the solved Physics textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.

Long Answer Questions

Question 1. Answer the following questions
(i) What is induced emf? Write Faraday’s law of electromagnetic induction. Express it mathematically.
(ii) A conducting rod of length ‘l’, with one end pivoted, is rotated with a uniform angular speed ‘ω’ in a vertical plane, normal to a uniform magnetic field ‘B’. Deduce an expression for the emf induced in this rod. If resistance of rod is R, what is the current induced in it? [CBSE Delhi 2013, 2012]

Solution.

(i) Induced emf: The emf developed in a coil due to change in magnetic flux linked with the coil is called the induced emf.

Faraday’s Law of Electromagnetic Induction: On the basis of experiments, Faraday gave two laws of electromagnetic induction:

1. When the magnetic flux linked with a coil or circuit changes, an emf is induced in the coil. If coil is closed, the current is also induced. The emf and current last so long as the change in magnetic flux lasts. The magnitude of induced emf is proportional to the rate of change of magnetic flux linked with the circuit. Thus if Δφ is the change in magnetic flux linked in time Δt then rate of change of flux is Δφ/Δt, so emf induced ε ∝ Δφ/Δt.

2. The emf induced in the coil (or circuit) opposes the cause producing it.

ε ∝ –Δφ/Δt

Here the negative sign shows that the induced emf ε opposes the change in magnetic flux.

ε = –K Δφ/Δt, where K is a constant of proportionality which depends on units chosen for φ, t and ε. In SI system the unit of flux φ is weber, unit of time t is second and unit of emf ε is volt and K = 1.

∴ ε = –Δφ/Δt   …(i)

If the coil contains N turns of insulated wire, then the flux linked with each turn will be the same and the emf induced in each turn will be in the same direction, hence the emfs of all turns will be added. Therefore the emf induced in the whole coil,

ε = –N Δφ/Δt = –Δ(Nφ)/Δt   …(ii)

Nφ is called the effective magnetic flux or the number of flux linkages in the coil and may be denoted by φ.

(ii) Expression for Induced emf in a Rotating Rod

Consider a metallic rod OA of length l which is rotating with angular velocity ω in a uniform magnetic field B, the plane of rotation being perpendicular to the magnetic field. A rod may be supposed to be formed of a large number of small elements. Consider a small element of length dx at a distance x from centre. If v is the linear velocity of this element, then area swept by the element per second = v dx.

××××××××××××××OAxdxωB (into page)

The emf induced across the ends of element

dε = B dA/dt = Bv dx

But v = xω

∴ dε = Bωx dx

The emf induced across the rod

ε = ∫0l Bωx dx = Bω ∫0l x dx = Bω [x2/2]0l = Bω (l2/2 – 0) = ½Bωl2

Current induced in rod I = ε/R = ½ Bωl2/R.

If circuit is closed, power dissipated = ε2/R = B2ω2l4/(4R).

Teacher's Note: Each element sweeps area v dx per second, v = xω; integrating over 0 to l gives Bωl²/2.

Exam Note: Integrate dε = Bωx dx from 0 to l.

Question 2. Answer the following questions
(1) Describe a simple experiment (or activity) to show that the polarity of emf induced in a coil is always such that it tends to produce an induced current which opposes the change of magnetic flux that produces it.
(2) The current flowing through an inductor of self-inductance L is continuously increasing. Plot a graph showing the variation of
(i) Magnetic flux versus the current
(ii) Induced emf versus dI/dt
(iii) Magnetic potential energy stored versus the current. [CBSE Delhi 2014]

Solution.

(1) When the North pole of a bar magnet moves towards the closed coil, the magnetic flux through the coil increases. This produces an induced emf which produces (or tend to produce if the coil is open) an induced current in the anti-clockwise sense. The anti-clockwise sense corresponds to the generation of North Pole which opposes the motion of the approaching N pole of the magnet. The face of the coil, facing the approaching magnet, then has the same polarity as that of the approaching pole of the magnet. The induced current, therefore, is seen to oppose the change of magnetic flux that produces it.

When a North Pole of a magnet is moved away from the coil, the current (I) flows in the clock-wise sense which corresponds to the generation of South Pole. The induced South Pole opposes the motion of the receding North Pole.

SNN(a) N-pole approaches: near face NSNS(b) N-pole recedes: near face S

(2) (i) Magnetic flux versus the current: φ = LI, a straight line through the origin.

Current (I)Magnetic flux (φ)

(ii) Induced emf versus dI/dt: ε = –L dI/dt, a straight line of slope –L through the origin (for constant dI/dt the emf is a constant, as in the second graph).

dI/dtεε = –L dI/dtdI/dtε(constant dI/dt)or

(iii) Magnetic energy stored versus the current: U = ½LI2, a parabola.

Current (I)Magnetic energy UU = ½LI²

Teacher's Note: Induced coil face opposes the magnet's motion; graphs follow from φ = LI, ε = –L dI/dt, U = ½LI².

Exam Note: Draw: straight line, straight line, parabola.

Question 3. Derive an expression for (i) induced emf and (ii) induced current when a conductor of length l is moved with a uniform velocity, normal to a uniform magnetic field B. Assume the resistance of conductor to be R.

Solution.

Expression for induced emf: We know that if a charge q moves with velocity v in a magnetic field of strength B, making an angle θ then magnetic Lorentz force

F = qvB sin θ

If v and B are mutually perpendicular, then θ = 90°

F = qvB sin 90° = qvB

The direction of this force is perpendicular to both v and B and is given by Fleming’s left hand rule.

Suppose a thin conducting rod PQ is placed on two parallel metallic rails CD and MN in a magnetic field of strength B. The direction of magnetic field B is perpendicular to the plane of paper, downward. In fig B is represented by cross (×) marks. Suppose the rod is moving with velocity v, perpendicular to its own length, towards the right.

××××××××××××××××××××××××PQvFm on electron+−CDMNB into the page

We know that metallic conductors contain free electrons, which can move within the metal. As charge on electron, q = –e therefore, each electron experiences a magnetic Lorentz force, Fm = evB, whose direction, according to Fleming’s left hand rule, will be from P to Q. Thus the electrons are displaced from end P towards end Q. Consequently the end P of rod becomes positively charged and end Q negatively charged. Thus a potential difference is produced between the ends of the conductor. This is the induced emf.

Due to induced emf, an electric field is produced in the conducting rod. The strength of this electric field

E = V/l   …(i)

And its direction is from (+) to (–) charge, i.e., from P to Q.

The force on a free electron due to this electric field, Fe = eE   …(ii)

The direction of this force is from Q to P which is opposite to that of electric field. Thus the emf produced opposes the motion of electrons caused due to Lorentz force. This is in accordance with Lenz’s law. As the number of electrons at end becomes more and more, the magnitude of electric force Fe goes on increasing, and a stage comes when electric force and magnetic force become equal and opposite. In this situation the potential difference produced across the ends of rod becomes constant. In this condition

Fe = Fm

eE = evB or E = Bv   …(iii)

∴ The potential difference produced,

V = El = Bvl volt

Also the induced current I = V/R = Bvl/R ampere

Teacher's Note: Electrons pile up until the electric force eE balances the magnetic force evB, so V = El = Bvl.

Exam Note: Equate eE with evB; then divide emf by R.

Question 4. Derive expression for self-inductance of a long air-cored solenoid of length l, cross-sectional area A and having number of turns N. [CBSE Delhi 2012, 2009]

lAN turns, air core

Solution.

Self-inductance of a long air-cored solenoid:

Consider a long air solenoid having ‘n’ number of turns per unit length. If current in solenoid is I, then magnetic field within the solenoid, B = μ0nI   …(i)

Where μ0 = 4π × 10–7 henry/metre is the permeability of free space.

If A is cross-sectional area of solenoid, then effective flux linked with solenoid of length l

Φ = NBA where N = nl is the number of turns in length ‘l’ of solenoid.

∴ Φ = (nl)BA

Substituting the value of B from (i)

Φ = (nl)(μ0nI)A = μ0n2AlI   …(ii)

∴ Self-inductance of air solenoid

L = Φ/I = μ0n2Al   …(iii)

If N is total number of turns in length l then n = N/l

∴ Self-inductance L = μ0(N/l)2Al = μ0N2A/l   …(iv)

Remark: If solenoid contains a core of ferromagnetic substance of relative permeability μr then self-inductance, L = μrμ0N2A/l.

Teacher's Note: Flux linkage NBA with B = μ0nI, divided by I, gives L = μ0N²A/l.

Exam Note: Write B first, then Φ = NBA.

Question 5. Obtain the expression for the mutual inductance of two long co-axial solenoids S1 and S2 wound one over the other, each of length L and radii r1 and r2 and n1 and n2 be number of turns per unit length, when a current I is set up in the outer solenoid S2. [CBSE Delhi 2017]
OR
(a) Define mutual inductance and write its SI units.
(b) Derive an expression for the mutual inductance of two long co-axial solenoids of same length wound one over the other.
(c) In an experiment, two coils C1 and C2 are placed close to each other. Find out the expression for the emf induced in the coil C1 due to a change in the current through the coil C2. [CBSE Delhi 2015]

Solution.

(a) When current flowing in one of two nearby coils is changed, the magnetic flux linked with the other coil changes; due to which an emf is induced in it (other coil). This phenomenon of electromagnetic induction is called the mutual induction. The coil, in which current is changed is called the primary coil and the coil in which emf is induced is called the secondary coil.

The SI unit of mutual inductance is henry.

(b) Mutual inductance is numerically equal to the magnetic flux linked with one coil (secondary coil) when unit current flows through the other coil (primary coil).

LS2 (outer): radius r2, n2 turns/lengthS1 (inner): radius r1, n1 turns/length

Consider two long co-axial solenoids, each of length L. Let n1 be the number of turns per unit length of the inner solenoid S1 of radius r1, n2 be the number of turns per unit length of the outer solenoid S2 of radius r2.

Imagine a time varying current I2 through S2 which sets up a time varying magnetic flux φ1 through S1.

∴ φ1 = M12I2   …(i)

Where M12 = coefficient of mutual inductance of solenoid S1 with respect to solenoid S2.

Magnetic field due to the current I2 in S2 is B2 = μ0n2I2, so magnetic flux through S1 is

φ1 = B2A1N1 where N1 = n1L and A1 = πr12

φ1 = (μ0n2I2)(πr12)(n1L) = μ0n1n2πr12LI2   …(ii)

From equations (i) and (ii), we get

M12 = μ0n1n2πr12L   …(iii)

Let us consider the reverse case. A time varying current I1 through S1 develops a flux φ2 through S2.

∴ φ2 = M21I1   …(iv)

where M21 = coefficient of mutual inductance of solenoid S2 with respect to solenoid S1. Magnetic flux due to S1 is confined solely in S1 as the solenoids are assumed to be very long. There is no magnetic field outside S1 due to current I1 in S1.

The magnetic flux linked with S2 is

φ2 = B1A1N2 = (μ0n1I1)(πr12)(n2L) = μ0n1n2πr12LI1   …(v)

From equations (iv) and (v), we get

M21 = μ0n1n2πr12L   …(vi)

From equations (iii) and (vi), we get

M12 = M21 = M = μ0n1n2πr12L

We can write the above equation as

M = μ0(N1/L)(N2/L)πr12 × L = μ0N1N2πr12/L

(c) When the current in coil C2 changes, the flux linked with C1 changes. This change in flux linked with C1 induces emf in C1.

C1C2rIA = area of coil

Taking the flux linked with C1 to be the flux of C2 (B at the centre of C2 = μ0I/2r, A = area of coil):

φ12 = B·A = (μ0I/2r)·A

emf in C1, ε1 = –dφ12/dt = –(μ0A/2r)(dI/dt) = –M(dI/dt), where M = μ0A/2r.

Teacher's Note: Flux passes only through the inner solenoid, so M = μ0n1n2πr1²L whichever coil is primary.

Exam Note: Flux area is inner πr1², not outer.

Question 6. A coil of number of turns N, area A is rotated at a constant angular speed ω, in a uniform magnetic field B and connected to a resistor R. Deduce expression for
(i) Maximum emf induced in the coil.
(ii) Power dissipation in the coil.

Solution.

(i) Suppose initially the plane of coil is perpendicular to the magnetic field B. When coil rotates with angular speed ω, then after time t, the angle between magnetic field B and normal to plane of coil is

θ = ωt

n̂Bθ = ωt

∴ At this instant magnetic flux linked with the coil φ = BA cos ωt

If coil contains N-turns, then emf induced in the coil

ε = –N dφ/dt = –N d/dt (BA cos ωt) = + NBAω sin ωt   …(i)

∴ For maximum value of emf ε, sin ωt = 1

∴ Maximum emf induced, εmax = NBAω

(ii) Taking the resistance of the circuit as R, the current is I = ε/R = (NBAω/R) sin ωt, so the instantaneous power dissipated is

P = ε2/R = (N2B2A2ω2/R) sin2 ωt

Its maximum value is N2B2A2ω2/R and its average over a cycle (⟨sin2 ωt⟩ = ½) is

Pav = N2B2A2ω2/(2R)

Teacher's Note: Flux NBA cos ωt gives emf NBAω sin ωt, peaking at NBAω; power is emf squared over R.

Exam Note: Differentiate NBA cos ωt; maximum when sin ωt = 1.

Question 7. State Faraday’s law of electromagnetic induction.
Figure shows a rectangular conductor PQRS in which the conductor PQ is free to move in a uniform magnetic field B perpendicular to the plane of the paper. The field extends from x = 0 to x = b and is zero for x > b. Assume that only the arm PQ possesses resistance r. When the arm PQ is pulled outward from x = 0 to x = 2b and is then moved backward to x = 0 with constant speed v, obtain the expressions for the flux and the induced emf. Sketch the variations of these quantities with distance 0 ≤ x ≤ 2b.

vSRPQx = 0x = bx = 2b
[CBSE (AI) 2010, (North) 2016]

Solution.

Faraday’s law: The magnitude of the induced emf in a circuit is directly proportional to the rate of change of magnetic flux linked with the circuit, ε = –dφ/dt.

Let length of conductor PQ = l.

At x = 0, magnetic flux φ = 0.

When PQ moves a small distance from x to x + dx then magnetic flux linked = B dA = Bl dx

The magnetic field is from x = 0 to x = b, so final magnetic flux = ΣBl dx = Bl Σdx = Blb (increasing)

That is, φ = Blx for 0 ≤ x ≤ b, and φ = Blb (constant) from x = b to x = 2b.

Induced emf, ε = –dφ/dt = –d(Blx)/dt = –Bl dx/dt = –Blv

where v = dx/dt is the velocity of arm PQ from x = 0 to x = b. From x = b to x = 2b the flux is constant, so ε = 0. The current is I = ε/r.

During return from x = 2b to x = b the induced emf is zero; but from x = b to x = 0 the area is decreasing, so magnetic flux is decreasing, and induced emf will be in opposite direction:

ε = +Blv

The force on PQ, F = BIl = B2l2v/r, always opposes the motion.

Flux φBlbemf εBlv–BlvForce FB²l²v/r–B²l²v/r0b2bb0OUTWARD (x: 0 to 2b)INWARD (x: 2b to 0)

Teacher's Note: Flux changes only for x below b: emf –Blv going out, zero beyond b, +Blv returning.

Exam Note: Plot flux and emf against x with steps.

Question 8. What are eddy currents? How are they produced? In what sense eddy currents are considered undesirable in a transformer? How can they be minimised? Give two applications of eddy currents. [CBSE (AI) 2011, (F) 2015]

Solution.

Eddy currents: When a thick metallic piece is placed in a time varying magnetic field, the magnetic flux linked with the plate changes, the induced currents are set up in the conductor; these currents are called eddy currents. These currents are sometimes so strong, that the metallic plate becomes red hot.

Due to heavy eddy currents produced in the core of a transformer, large amount of energy is wasted in the form of undesirable heat.

Minimisation of Eddy Currents: Eddy currents may be minimised by using laminated core of soft iron. The resistance of the laminated core increases and the eddy currents are reduced and wastage of energy is also reduced.

Application of Eddy Currents:

(i) Induction Furnace: In induction furnace, the metal to be heated is placed in a rapidly varying magnetic field produced by high frequency alternating current. Strong eddy currents are set up in the metal produce so much heat that the metal melts. This process is used in extracting a metal from its ore. The arrangement of heating the metal by means of strong induced currents is called the induction furnace.

(ii) Induction Motor: The eddy currents may be used to rotate the rotor. Its principle is: When a metallic cylinder (or rotor) is placed in a rotating magnetic field, eddy currents are produced in it. According to Lenz’s law, these currents tend to reduce the relative motion between the cylinder and the field. The cylinder, therefore, begins to rotate in the direction of the field. This is the principle of induction motor.

Teacher's Note: Changing flux in bulk metal drives circulating currents that waste heat in cores; insulated laminations raise resistance.

Exam Note: Cover production, transformer loss, laminations, two uses.

Xam Idea Solutions for Class 12 Mathematics: Xam Idea Solutions Class 12 Physics Chapter 6 Electromagnetic Induction Long Answer Questions

Access Class 12 Mathematics Solutions

Access the complete chapter-wise PDF for Xam Idea Solutions Class 12 Physics Chapter 6 Electromagnetic Induction Long Answer Questions. These structured Xam Idea Solutions solutions for Class 12 Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.

Step-by-Step Mathematical Explanations

Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.

Complete Your Class 12 Exam Preparation

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these [current-page:node:field_author] Solutions for Class 12 Physics?

They are chapter-wise solved questions from the book for Class 12 Physics. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 12 Physics Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 12 Physics?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 12 Physics questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 12 Physics Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.