Xam Idea Solutions Class 12 Physics Chapter 3 Current Electricity Very Short Answer Questions

Solutions for Class 12 Physics: Chapter 03 Current Electricity

Explore reliable textbook solutions for Chapter 03 Current Electricity tailored for Class 12 learners using methodologies. Utilizing these Physics answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.

Practice Class 12 Physics Solutions: Chapter 03 Current Electricity

View or download the dedicated Chapter 03 Current Electricity solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Physics.

Very Short Answer Questions

Question 1. Define the term drift velocity of charge carriers in a conductor. Write its relationship with current flowing through it. [CBSE Delhi 2014]

Solution.

Drift velocity is defined as the average velocity acquired by the free electrons in a conductor under the influence of an electric field applied across the conductor. It is denoted by vd.

Current, I = NeA. Vd

Teacher's Note: Drift velocity is average electron velocity under a field, related to current through density, charge and area.

Exam Note: Quote I = neA vd.

Question 2. The emf of a cell is always greater than its terminal voltage. Why? Give reason. [CBSE Delhi 2013]

Solution.

(i) In an open circuit, the emf of a cell and terminal voltage are same.

(ii) In closed circuit, a current is drawn from the source, so, V = E – Ir, it is true/valid, because each cell has some finite internal resistance.

Teacher's Note: Internal resistance causes a drop when current flows, so terminal voltage is less than emf.

Exam Note: Write V = E - Ir.

Question 3. Give an example of a material each for which temperature coefficient of resistivity is (i) Positive, (ii) Negative. [CBSE Sample Paper 2016]

Solution.

(i) Copper (Cu) (Temperature coefficient of resistivity (α) is positive for metals and alloys.)

(ii) Silicon (Si) (For semiconductors, α is negative)

Teacher's Note: Metals have positive temperature coefficient of resistivity, semiconductors negative.

Exam Note: Name one material for each.

Question 4. The emf of a cell always greater than its terminal voltage. Why? Give reason. [CBSE Delhi 2013]

Solution.

(i) In an open circuit, the emf of a cell and terminal voltage are same.

(ii) In closed circuit, a current is drawn from the source, so, V = E – Ir, it is true/valid, because each cell has some finite resistance.

Teacher's Note: Terminal voltage falls below emf during discharge because of the internal resistance drop.

Exam Note: Give V = E - Ir; equal on open circuit.

Question 5. Distinguish between emf and terminal voltage of a cell. [CBSE Patna 2015]

Solution.

The emf of a cell is equal to the terminal voltage, when the circuit is open.

The emf of a cell is less than the terminal voltage, when the cell is being charged, i.e.,

V = E + ir

Teacher's Note: Emf equals terminal voltage on open circuit, and during charging terminal voltage exceeds emf.

Exam Note: Write both relations.

Question 6. Though we specify the direction of direct current by putting an arrow, why is it not considered a vector quantity?

Solution.

Current is a scalar quantity because it does not obey the laws of vector addition.

Teacher's Note: Current obeys algebraic addition rather than vector addition, so it is a scalar despite its arrow.

Exam Note: State scalar, with the addition reason.

Question 7. Is current density a scalar or a vector quantity?

Solution.

Current density is a vector quantity.

Teacher's Note: Current density is current per unit area with direction, hence a vector.

Exam Note: State J = I/A and vector.

Question 8. A steady current is flowing in a cylindrical conductor. Does electric field exist within the conductor?

Solution.

Yes, electric field exists within the conductor because it is the electric field which imparts acceleration to electrons for the flow of current.

Teacher's Note: A steady current needs a field inside the conductor to drive the electrons.

Exam Note: Answer yes, with the driving reason.

Question 9. When a straight wire of resistance R is bent into U-shape, does its resistance change?

Solution.

No, the resistance remains same, because length and cross-sectional area of the wire remain unchanged.

Teacher's Note: Resistance depends on length, area and material, none of which change on bending.

Exam Note: Cite R = rho L/A; unchanged.

Question 10. If the radius of a copper wire is doubled, will its specific resistance increase, decrease or remain same?

Solution.

The specific resistance of a wire depends only on the material (at a given temperature). Therefore by changing the radius, the specific resistance of copper remains unchanged.

Teacher's Note: Resistivity depends on material and temperature, not dimensions, so doubling the radius leaves it unchanged.

Exam Note: State resistivity is independent of size.

Question 11. A uniform wire of resistance 50 Ω is cut into 5 equal parts. These parts are now connected in parallel. What is the value of equivalent resistance of the combination?

Solution.

2 ohms

Teacher's Note: Equal pieces divide resistance by n each, and parallel joining divides again by n.

Exam Note: Use R/n then R/n squared; unit ohm.

Question 12. Define the term resistivity and write the SI unit.

Solution.

The resistivity of a material of a conductor is defined as the resistance offered by a conductor of length 1 m and area of cross-section 1 m2. Its SI unit is ohm × metre (Ω m).

Teacher's Note: Resistivity is the resistance of a unit-length, unit-area conductor, with SI unit ohm metre.

Exam Note: Give definition and unit ohm metre.

Question 13. A wire of resistivity ρ is stretched to double its length. What will be its new resistivity?

Solution.

New resistivity will be ρ (unchanged) because resistivity is independent of dimensions of conductor.

Teacher's Note: Resistivity is a material property, so stretching the wire changes resistance but not resistivity.

Exam Note: State unchanged; resistance changes.

Question 14. Specific resistance of copper, silver and constantan are 1.18 × 10–6, 1 × 10– 6, 45 × 10–6 ohm cm respectively. Which is the best electrical conductor and why?

Solution.

Smaller the resistivity of a substance, larger is its conductivity. The resistivity of silver is least so silver is the best conductor.

Teacher's Note: Conductivity is the reciprocal of resistivity, so the lowest resistivity conducts best.

Exam Note: Compare values and name the smallest.

Question 15. For household electrical wiring, one uses Cu wires or Al wires. What considerations are kept in mind? [NCERT Exemplar]

Solution.

Two considerations are required: (i) cost of metal, and (ii) good conductivity of metal. Cost factor inhibits silver. Cu and Al are the next best conductors.

Teacher's Note: Wiring metals must conduct well yet cost little, favouring copper and aluminium over silver.

Exam Note: Give conductivity and cost.

Question 16. Why are alloys used for making standard resistance coils? [NCERT Exemplar]

Solution.

Alloys have:

(i) Low value of temperature coefficient and the resistance of the alloy does not vary much with rise in temperature.

(ii) High resistivity, so even a smaller length of the material is sufficient to design high standard resistance.

Teacher's Note: Standard coils need stable resistance, so alloys with small temperature coefficient and high resistivity are used.

Exam Note: Give both properties.

Question 17. As the temperature of a conductor increases, both its resistivity as well as conductivity change. Will the ratio of its resistivity and conductivity increase, decrease or remain the same.

Solution.

Increases.

Teacher's Note: Resistivity rises with temperature while conductivity falls, so their ratio increases.

Exam Note: State increases, with reason.

Question 18. On increasing the current drawn from a cell, the net potential difference across its terminals is lowered, why?

Solution.

The terminal potential difference V = E – Ir. Clearly if I is increased, the terminal potential difference falls.

Teacher's Note: More current means a larger drop across internal resistance, lowering the terminal voltage.

Exam Note: Write V = E - Ir.

Question 19. Is it possible that the terminal potential difference across the cell be zero? If yes, state the condition.

Solution.

Yes, terminal potential difference V = IR. If external resistance R = 0, V = 0; i.e. terminal potential difference is zero, when cell is short circuited.

Teacher's Note: Terminal voltage is IR, which is zero when external resistance is zero, a short circuit.

Exam Note: Answer yes; name short circuit.

Question 20. State the condition under which the terminal pd across a battery and its emf are equal.

Solution.

The terminal pd across a battery is equal to its emf when battery is in open circuit, i.e., when no current is being drawn from the cell.

Teacher's Note: With no current drawn there is no internal drop, so terminal voltage equals emf.

Exam Note: State open circuit, zero current.

Question 21. When is a Wheatstone’s bridge most sensitive?

Solution.

The Wheatstone’s bridge is most sensitive when all the four resistances of the bridge are equal.

Teacher's Note: A bridge is most sensitive when its four arms have comparable values.

Exam Note: State all four resistances nearly equal.

Question 22. Name the device used for measuring the internal resistance of a secondary cell.

Solution.

Potentiometer.

Teacher's Note: A potentiometer measures emf and terminal voltage without drawing current, so it finds internal resistance.

Exam Note: Name potentiometer.

Question 23. Why do we prefer a potentiometer to measure the emf of a cell rather than a voltmeter?

Solution.

A voltmeter has a finite resistance and draws current from a cell, therefore voltmeter measures terminal potential difference rather than emf, while a potentiometer at balance condition, does not draw any current from the cell; so the cell remains in open circuit. Hence potentiometer reads the actual value of emf.

Teacher's Note: A voltmeter draws current and reads terminal voltage, while a potentiometer at balance draws none and gives emf.

Exam Note: Mention null balance, no current drawn.

Question 24. What is the advantage of using thick metallic strips to join wires in a potentiometer? [NCERT Exemplar]

Solution.

The metal strips have low resistance and need not be counted in the potentiometer length l of the null point. One measures only their lengths along the straight segments (of length l metre each). This is easily done with the help of centimeter rulings or meter ruler and leads to accurate measurements.

Teacher's Note: Thick strips have negligible resistance, so only the wire's straight length counts.

Exam Note: Say low resistance, accurate length.

Question 25. Define the term ‘Mobility’ of charge carries in a conductor. Write its SI unit. What is its relation with relaxation time? [CBSE Delhi 2014, (North) 2016]

Solution.

Mobility is defined as the magnitude of the drift velocity acquired by it in a unit electric field.

μ = |vd|/E = eEτ/(mE) = eτ/m ⇒ μ ∝ τ

Where τ is the average collision time for electrons.

The SI unit of mobility is m2/Vs or m2 V–1s–1.

Teacher's Note: Mobility is drift velocity per unit electric field and is proportional to relaxation time.

Exam Note: State definition, unit m²/Vs and μ = eτ/m.

Question 26. Define electrical conductivity of a conductor and give its SI unit. On what factors does it depend? [CBSE Delhi 2014, (East) 2016]

Solution.

The reciprocal of resistivity (ρ) of a material is called its electrical conductivity (σ), i.e., σ = 1/ρ

SI unit of conductivity is mho m–1 (or siemen m–1).

It depends upon number density, nature of material, relaxation time and temperature.

Teacher's Note: Conductivity is the inverse of resistivity and depends on material, carrier density, relaxation time and temperature.

Exam Note: Give σ = 1/ρ, unit S m⁻¹.

Question 27. Plot a graph showing variation of current versus voltage for the material GaAs. [CBSE Delhi 2014]

Solution.

The variation of electric current with applied voltage for GaAs is as shown.

Voltage V (V)Current I (mA)Non-linearNegative resistance

Teacher's Note: GaAs current rises non-linearly, peaks, then falls (negative resistance) before rising again.

Exam Note: Draw the rise, peak and falling part.

Question 28. Plot a graph showing the variation of resistance of a conducting wire as a function of its radius, keeping the length of the wire and its temperature as constant. [CBSE (F) 2013]

Solution.

Resistance of a conductor of length l, and radius r is given by R = ρl/(πr2); thus R ∝ 1/r2

rR

Teacher's Note: Resistance falls as 1/r², so the graph is a curve falling steeply and flattening.

Exam Note: Draw a falling curve; state R ∝ 1/r².

Question 29. Show variation of resistivity of Si with temperature in a graph. [CBSE Delhi 2014]

Solution.

Resistivity of Si decreases rapidly with increasing temperatures.

Tρ

Teacher's Note: For a semiconductor like silicon, resistivity drops as temperature rises.

Exam Note: Draw a falling curve.

Question 30. Two materials Si and Cu, are cooled from 300 K to 60 K. What will be the effect on their resistivity? [CBSE (F) 2013]

Solution.

In silicon, the resistivity increases.

In copper, the resistivity decreases.

T (K)For siliconρT (K)For copperρ

Teacher's Note: Silicon is a semiconductor, so cooling raises its resistivity; copper’s falls on cooling.

Exam Note: Si increases, Cu decreases.

Question 31. (i) Graph showing the variation of current versus voltage for a material GaAs is shown in the figure. Identify the region of negative resistance (ii) Where Ohm’s law is obeyed. [CBSE Delhi 2015]

Voltage VCurrent IABCDE

Solution.

(i) In region DE, material GaAs (Gallium Arsenide) offers negative resistance, because slope ΔV/ΔI < 0.

(ii) The region AB approximately passes through the origin and is nearly linear (current increases in proportion to voltage). Hence, it follows Ohm’s law and in this region ΔV/ΔI > 0.

Teacher's Note: Negative resistance is where current falls as voltage rises; the near-straight part from the origin is ohmic.

Exam Note: DE negative; AB ohmic.

Question 32. Define the current sensitivity of a galvanometer. Write its SI unit. [CBSE (AI) 2013]

Solution.

Ratio of deflection produced in the galvanometer and the current flowing through it is called current sensitivity.

Si = θ/I

SI unit of current sensitivity Si is division/ampere or radian/ampere.

Teacher's Note: Current sensitivity is deflection produced per unit current.

Exam Note: Give formula θ/I and unit.

Question 33. A cell of emf ‘E’ and internal resistance ‘r’ draws a current ‘I’. Write the relation between terminal voltage ‘V’ in terms of E, I and r. [CBSE Delhi 2013]

VI(ε, r)

Solution.

The terminal voltage V < E, so V = E – Ir

Teacher's Note: While supplying current, the terminal voltage falls below emf by the drop Ir.

Exam Note: Write V = E − Ir.

Question 34. Two identical cells, each of emf E, having negligible internal resistance, are connected in parallel with each other across an external resistance R. What is the current through this resistance? [CBSE (AI) 2013]

εε≅εeq = ε

Solution.

Current, I = E/R

Concept: (i) emf of combination of two (or more cells) in parallel remain same.

(ii) Internal resistance is negligible i.e., zero.

So, I = εeq/(R + req) = ε/R (req = 0)

Teacher's Note: Identical cells in parallel give the same emf E, and zero internal resistance leaves I = E/R.

Exam Note: Give I = E/R with reason.

Question 35. A resistance R is connected across a cell of emf ε and internal resistance r. A potentiometer now measures the potential difference between the terminals of the cell as V. Write the expression for ‘r’ in terms of ε, V and R. [CBSE Delhi 2011]

Solution.

r = (ε/V − 1)R

Teacher's Note: Terminal voltage V = IR, and ε = V + Ir, which gives r = (ε/V − 1)R.

Exam Note: Write r = (ε/V − 1)R.

Question 36. Two wires, one of copper and the other of manganin, have same resistance and equal thickness. Which wire is longer? Justify your answer. [CBSE Guwahati 2015]

Solution.

Copper

Reason: Let l1 and l2 be lengths of copper and manganin wires having same resistance R and thickness i.e. area of cross-section (A).

Resistance of copper wire, R = ρ1l1/A. Resistance of manganin wire, R = ρ2l2/A

⇒ ρ1l1 = ρ2l2 (As ρl = constant)

Since ρ1 << ρ2, so l1 >> l2, i.e., copper wire would be longer.

Teacher's Note: Copper has far lower resistivity, so it needs more length to give the same resistance.

Exam Note: Use R = ρl/A; copper longer.

Question 37. Two wires one of manganin and the other of copper have equal length and equal resistance. Which one of these wires will be thicker? [CBSE (AI) 2012, (South) 2016] [HOTS]

Solution.

Resistance R = ρl/A = ρl/πr2

Resistivity ρ of manganin is much greater than that of copper, therefore to keep same resistance for same length of wire, the manganin wire must be thicker.

Teacher's Note: With equal length and resistance, the wire of higher resistivity needs larger cross-section.

Exam Note: Manganin thicker; use R = ρl/A.

Question 38. Nichrome and copper wires of same length and same radius are connected in series. Current I is passed through them. Which wire gets heated up more? Justify your answer. [CBSE (AI) 2017]

Solution.

Nichrome wire gets heated up more.

Heat dissipated in a wire is given by H = I2Rt

H = I2(ρl/A)t (∵ R = ρl/A)

Here, radius is same, hence area (A) is same. Also, current (I) and length (l) are same.

∴ H ∝ ρ

But ρnichrome > ρcopper

∴ Hnichrome > Hcopper

Teacher's Note: In series the same current flows, so heat is proportional to resistance, which is larger for nichrome.

Exam Note: Use H = I²Rt with higher resistivity.

Question 39. I – V graph for a metallic wire at two different temperatures, T1 and T2 is as shown in the figure. Which of the two temperatures is lower and why? [CBSE Allahabad 2015]

VIT1T2

Solution.

If a constant current I flows through the conductor, resistance at temperature T1 and T2 is R1 = V1/I and R2 = V2/I

Since V2 > V1 ⇒ R2 > R1

The resistance of the wire increases with rise of temperature. Hence, T1 is lower than T2.

Teacher's Note: T1 gives more current for the same voltage, so lower resistance, so lower temperature.

Exam Note: Compare slopes; metals’ R rises with T.

Question 40. Two metallic resistors are connected first in series and then in parallel across a d c supply. Plot of I –V graph is shown for the two cases. Which one represents a parallel combination of the resistors and why? [CBSE Bhubaneshwar 2015]

VIAB

Solution.

Line A represents the parallel combination.

Reason: At a given potential difference V, current in the combination A is more than in the combination B. i.e., IA > IB

Since RA = V/IA and RB = V/IB ⇒ RA < RB

Teacher's Note: Parallel combination has the lower resistance, so it draws more current at the same voltage.

Exam Note: Steeper line is parallel.

Question 41. The variation of potential difference V with length l in the case of two potentiometer P and Q is as shown. Which of these two will you prefer for comparing the emfs of two primary cells and why? [CBSE (East) 2016] [HOTS]

lVPQ

Solution.

For greater accuracy of potentiometer, the potential gradient (slope) V/l must be as small as possible. In the graph given the slope V/l is smaller for a potentiometer Q; hence we shall prefer potentiometer Q for comparing the emfs of two cells.

Teacher's Note: A smaller potential gradient lets balance lengths be longer, so measurements are more accurate.

Exam Note: Choose Q: smaller slope.

Question 42. I – V graph for two identical conductors of different materials A and B is shown in the figure. Which one of the two has higher resistivity? [CBSE (Chennai) 2015] [HOTS]

VIAB

Solution.

The resistivity of material B is higher.

Reason: If the same amount of the current flows through them, then VB > VA, and from Ohm’s law RB > RA. Hence the resistivity of the material B is higher.

Teacher's Note: Identical dimensions mean the conductor with the smaller slope has greater resistance, hence higher resistivity.

Exam Note: B has higher resistivity.

Question 43. What is the effect of heating of a conductor on the drift velocity of free electrons?

Solution.

vd = (eE/m)τ

By heating a conductor, the collisions of electrons occur more frequently; so relaxation time decreases and hence drift velocity decreases.

Teacher's Note: Heating shortens relaxation time, so drift velocity falls.

Exam Note: Link heating to smaller τ.

Question 44. What happens to the power dissipation if the value of electric current passing through a conductor of constant resistance is doubled?

Solution.

Power P = I2Rt ∝ I2

Clearly if current is doubled, the power dissipated becomes 4 times.

Teacher's Note: Power is proportional to current squared, so doubling current gives four times power.

Exam Note: Say 4 times; P ∝ I².

Question 45. A carbon resistor is marked in colour bands of red, black, orange and silver. What is the resistance and tolerance value of the resistor?

Solution.

From colour-code table: Red → 2, Black → 0, Orange → 3 (multiplier 103), Silver → ±10%

R = 20 × 103 Ω ± 10% = 20 kΩ ± 10%

Teacher's Note: Red 2, black 0, orange ×10³ and silver ±10% give 20 kΩ ± 10%.

Exam Note: Answer 20 kΩ ± 10%.

Question 46. The metallic conductor is at temperature θ1. The temperature of metallic conductor is increased to θ2. How will the product of its resistivity and conductivity change?

Solution.

Product ρσ = ρ · (1/ρ) (since σ = 1/ρ) = 1

⇒ Product is independent of temperature.

Teacher's Note: Conductivity is the inverse of resistivity, so their product always equals 1.

Exam Note: Say it remains 1.

Question 47. The potential difference applied across a given resistance is altered so that heat produced per second increases by a factor of 16. By what factor does the applied pd change?

Solution.

Power P = V2/R ⇒ V ∝ √P for given resistance. Hence, for making power 16-times, voltage should be made 4-times.

Teacher's Note: For a fixed resistance, power varies as V², so 16 times power needs 4 times voltage.

Exam Note: Answer 4 times.

Question 48. Two electric bulbs whose resistances are in the ratio 1 : 2 are connected in parallel to a source of constant voltage. What will be the ratio of power dissipation in these wires?

Solution.

Power P = V2/R ∝ 1/R for same voltage, the bulbs being in parallel.

P1/P2 = R2/R1 = 2/1.

Thus, ratio of power dissipated is 2 : 1.

Teacher's Note: In parallel the voltage is the same, so power is inversely proportional to resistance.

Exam Note: Ratio 2 : 1.

Question 49. Two 120 V light bulbs, one of 25 W and the other of 200 W were connected in series across a 240 V line. One bulb burnt out almost instantaneously. Which one was burnt and why?

Solution.

Resistance of bulb R = V2/P ∝ 1/P; so 25 W bulb has higher resistance. In series current remains the same; so pd across 25 W bulb will be more than that across 200 W bulb; so 25 W bulb was burnt out immediately.

Teacher's Note: The 25 W bulb has more resistance, so in series it gets more than its rated 120 V.

Exam Note: 25 W bulb; higher resistance.

Question 50. Two heating coils, one of fine wire and other of thick wire, made of the same material and of the same length are connected one by one to a source of electricity. Which coil will produce heat at a greater rate?

Solution.

Heat produced per second Q ∝ 1/R and R = ρl/πr2

∴ Q ∝ πr2/ρl

Clearly, thick wire will produce heat at a greater rate.

Teacher's Note: At the same voltage, the thick wire has lower resistance and so dissipates more power.

Exam Note: Thick wire; lower resistance.

Question 51. The amount of electric charge passing through a cross-section of wire in time t is Q (t) = At2 + Bt + C. Where A, B and C are constants having values 5, 4 and 1 respectively. Calculate the value of electric current at t = 4s.

Solution.

We have, Q(t) = At2 + Bt + C

I = dQ/dt = 2At + B = 2 × 5 × 4 + 4 (at t = 4 s)

I = 44 A.

Teacher's Note: Current is the rate of change of charge, so differentiate Q with respect to t.

Exam Note: Differentiate; answer 44 A.

Question 52. What is the value of I in the given current distribution?

I (in)4 A (in)2 A (in)5 A (out)3 A (out)

Solution.

I + 4 + 2 = 5 + 3

I = 2 A

Teacher's Note: The charge entering a junction equals the charge leaving, so incoming currents equal outgoing currents.

Exam Note: Use Kirchhoff’s junction rule.

Question 53. I-V graph for a metallic wire at two different temperatures T1 and T2 is shown in the figure. Which of these two temperatures is higher and why? [HOTS]

VIT1T2

Solution.

The slope of given graph, gives I/V = 1/R. Smaller the slope, larger the resistance. As resistance of a metal increases with the increase of temperature, resistance at temperature T2 is higher.

Teacher's Note: T2 has the smaller slope, hence larger resistance, which for a metal means higher temperature.

Exam Note: T2 higher; smaller slope.

Question 54. The I-V characteristics of a resistor are observed to deviate from a straight line for higher values of current as shown in the adjoining figure why? [HOTS]

VI

Solution.

At higher value of current, sufficient heat is produced which raises the temperature of resistor and so causes increase in resistance.

Teacher's Note: More current heats the resistor, raising its resistance and bending the graph.

Exam Note: Heating raises resistance.

Question 55. V-I graphs for parallel and series combinations of two metallic resistors are shown in figure. Which graph represents parallel combination? Justify your answer. [HOTS]

IVBA

Solution.

Graph ‘A’ represents parallel combination.

Reason: In series combination the effective resistance, R = V/I is more than parallel combination.

The slope of a line of V-I graph represents resistance. The slope of B is more than A. Therefore B represents series combination and A represents parallel combination.

Teacher's Note: The slope of a V–I graph is resistance; the combination with smaller resistance is parallel.

Exam Note: Smaller slope is parallel.

Question 56. Draw a graph to show a variation of resistance of a metal wire as a function of its diameter keeping its length and material constant. [CBSE Sample Paper 2017]

Solution.

R = ρ(1/A) ⇒ ρl/πr2 = ρ·4l/πD2

i.e. R ∝ 1/D2 ⇒ R is inversely proportional to the square of the diameter.

Hence, graph of resistance (R) versus diameter (D) is of the following form.

DR

Teacher's Note: Resistance varies as 1/D², so the graph falls steeply and flattens.

Exam Note: Draw falling curve; state R ∝ 1/D².

Question 57. Current is allowed to flow in a metallic wire at a constant potential difference. When the wire becomes hot, cold water is poured on half of its portion. By doing so, its other half portion becomes still more hot. Explain its reason. [HOTS]

Solution.

When cold water is poured on half the wire, the resistance of this portion decreases, and hence the current I = V/R in whole wire increases and so the other half portion becomes still more hot.

Teacher's Note: Cooling lowers that half’s resistance, so total current rises and the other half heats more.

Exam Note: Cooling lowers R; current rises.

Download Xam Idea Solutions for Class 12 Math PDF

Download Xam Idea Solutions for Class 12

Review detailed solutions for Class 12 Mathematics. The Xam Idea Solutions Class 12 Physics Chapter 3 Current Electricity Very Short Answer Questions PDF provides comprehensive answers mapped to standard Xam Idea Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.

Mastering Core Concepts with Xam Idea Solutions

Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.

Next Steps in Your Mathematics Revision

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these [current-page:node:field_author] Solutions for Class 12 Physics?

They are chapter-wise solved questions from the book for Class 12 Physics. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 12 Physics Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 12 Physics?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 12 Physics questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 12 Physics Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.