Xam Idea Solutions Class 12 Physics Chapter 2 Electrostatic Potential And Capacitance Very Short Answer Questions

Download Class 12 Physics Textbook Solutions: Chapter 02 Electrostatic Potential And Capacitance

Explore reliable textbook solutions for Chapter 02 Electrostatic Potential And Capacitance tailored for Class 12 learners using methodologies. Utilizing these Physics answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.

Access Textbook Answers and Solutions

Navigate directly to the solved Physics textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.

Very Short Answer Questions

Question 1. Name the physical quantity whose SI unit is JC–1. Is it a scalar or a vector quantity? [CBSE Delhi 2010]

Solution.

Electric potential. It is a scalar quantity.

Teacher's Note: Joule per coulomb is the volt, the unit of electric potential, which has magnitude only.

Exam Note: Write potential as work per unit charge; scalar.

Question 2. Why do the equipotential surfaces due to a uniform electric field not intersect each other? [CBSE (F) 2012]

Solution.

This is because, at the point of intersection there will be two values of electric potential, which is not possible.

Teacher's Note: Each point has one potential value, so two equipotential surfaces cannot cross.

Exam Note: Give the one-potential-per-point reason.

Question 3. “For any charge configuration, equipotential surface through a point is normal to the electric field.” Justify. [CBSE Delhi 2014]

Solution.

The work done in moving a charge from one point to another on an equipotential surface is zero. If electric field is not normal to the equipotential surface, it would have non-zero component along the surface. In that case work would be done in moving a charge on an equipotential surface.

Teacher's Note: No work is done along an equipotential surface, so the field has no tangential component and is normal.

Exam Note: Use the zero-work argument.

Question 4. A hollow metal sphere of radius 5 cm is charged such that the potential on its surface is 10 V. What is the potential at the centre of the sphere? [CBSE (AI) 2011]

Solution.

Potential at centre of sphere = 10 V. Potential at all points inside the hollow metal sphere (or any surface) is always equal to the potential at its surface.

Teacher's Note: The field inside a hollow charged conductor is zero, so potential inside equals the surface value.

Exam Note: Quote potential equals surface value, unit volt.

Question 5. What is the work done in moving a test charge q through a distance of 1 cm along the equatorial axis of an electric dipole? [CBSE (AI) 2009]

Solution.

At every point on equatorial axis, the potential is zero, so work done

W = q ∆V = 0 (zero).

Teacher's Note: The equatorial line of a dipole has zero potential, so no potential difference and no work.

Exam Note: Use W = q times change in V.

Question 6. Can electric potential at a point be zero, while the electric field is not zero?

Solution.

Yes, electric potential is zero at all points on equatorial line of electric dipole, while electric field strength is not zero.

Teacher's Note: Potential and field are related by gradient, so zero potential can coexist with non-zero field, as on a dipole's equator.

Exam Note: Answer yes with the dipole example.

Question 7. Can electric field at a point be zero, while electric potential is not zero?

Solution.

Yes, inside a hollow charged metallic conductor, the electric field is zero, but electric potential is finite.

Teacher's Note: Constant potential means zero field, as inside a charged hollow conductor.

Exam Note: Answer yes with the hollow conductor example.

Question 8. Do free electrons travel to region of higher potential or lower potential? [NCERT Exemplar]

Solution.

Free electrons would travel to regions of higher potentials as they are negatively charged.

Teacher's Note: Negative charges lower their energy by moving toward higher potential.

Exam Note: State higher potential, reason: negative charge.

Question 9. Can there be a potential difference between two adjacent conductors carrying the same charge? [NCERT Exemplar]

Solution.

Yes.

Teacher's Note: Potential also depends on size and surroundings, so equal charges need not give equal potentials.

Exam Note: Answer yes with a short reason.

Question 10. Two protons are brought nearer; what will be the effect on potential energy of system?

Solution.

A repulsive force acts between protons, if they are brought nearer, work must be done by external force; hence the potential energy of system increases.

Teacher's Note: Like charges repel, so bringing protons closer needs external work and raises potential energy.

Exam Note: State increase, with the repulsion reason.

Question 11. An electron and a proton are brought nearer; how does the potential energy of system change?

Solution.

There is attractive force between an electron and a proton, therefore when they come nearer, the work is done by the system itself and so the potential energy of system decreases.

Teacher's Note: Opposite charges attract, so bringing them closer lowers the system's potential energy.

Exam Note: State decrease, with attraction reason.

Question 12. Name the dielectric whose molecules have (i) Non-zero and (ii) Zero dipole moment.

Solution.

(i) The dielectric having non-zero dipole moment is water or HCl.

(ii) The dipole having zero dipole moment is CH4 or H2.

Teacher's Note: Polar molecules have permanent dipole moment, while symmetric non-polar molecules have none.

Exam Note: Give one example for each.

Question 13. What is the function of a dielectric in a capacitor?

Solution.

Dielectric reduces the effective potential on plates and hence increases the capacitance.

Teacher's Note: A dielectric reduces the field and potential difference for given charge, raising capacitance.

Exam Note: Mention reduced field and increased capacitance.

Question 14. How does the electric field inside a dielectric decrease when it is placed in an external electric field?

Solution.

When a dielectric is placed in an external electric field, the charges are induced on the faces of dielectric which produce opposite electric field in the dielectric. Thus net electric field inside the dielectric is reduced.

Teacher's Note: Induced surface charges produce an opposing field, which weakens the net field inside the dielectric.

Exam Note: Mention polarisation and the opposing field.

Question 15. Figure shows the field lines on a positive charge. Is the work done by the field in moving a small positive charge from Q to P positive or negative? Give reason. [CBSE (F) 2014]

Solution.

+PQ

The work done by the field is negative. This is because the charge is moved against the force exerted by the field.

Teacher's Note: P is closer to the positive charge, so moving there opposes the repulsive force.

Exam Note: Say negative; moved against the field force.

Question 16. The field lines of a negative point charge are as shown in the figure. Does the kinetic energy of a small negative charge increase or decrease in going from B to A? [CBSE Patna 2015]

Solution.

−qAB

The kinetic energy of a negative charge decreases while going from point B to point A, against the movement of force of repulsion.

Teacher's Note: A is closer to the negative charge, so the small negative charge is moving against repulsion.

Exam Note: Say kinetic energy decreases; moves against repulsion.

Question 17. A point charge +Q is placed at point O as shown in the figure. Is the potential difference VA − VB positive, negative or zero? [CBSE Delhi 2016]

Solution.

+QOAB

The potential due to a point charge decreases with increase of distance. So, VA − VB is positive.

Explanation: Let the distance of point A and B from charge Q be rA and rB respectively. VA = +Q/(4πε0rA) and VB = +Q/(4πε0rB). VA − VB = (+Q/4πε0)(1/rA − 1/rB).

Also rA < rB, so 1/rA > 1/rB and (1/rA − 1/rB) has positive value. Also Q is positive. Hence VA − VB is positive.

Teacher's Note: Potential of a positive charge falls with distance, and A is closer than B.

Exam Note: Compare rA and rB using V = kQ/r.

Question 18. A point charge Q is placed at point ‘O’ as shown in figure. Is the potential at point A, i.e., VA, greater, smaller or equal to potential, VB, at point B, when Q is (i) positive, and (ii) negative charge? [CBSE (F) 2017]

Solution.

OABr1r2

(i) If Q is positive, VA = KQ/r1 and VB = KQ/r2. Clearly, VA > VB.

(ii) If Q is negative, VA = −KQ/r1 and VB = −KQ/r2 (magnitudes of charge taken). Clearly, VA < VB.

Teacher's Note: Potential is kQ/r, so it is larger at the nearer point for a positive charge and smaller for a negative charge.

Exam Note: Answer both cases using r1 < r2.

Question 19. A 500 µC charge is at the centre of a square of side 10 cm. Find the work done in moving a charge of 10 µC between two diagonally opposite points on the square. [CBSE Delhi 2008]

Solution.

Oq = 500 µCAB

The points A and B are equidistant from the centre of square where charge q = 500 µC is located; therefore, points A and B are at the same potential i.e., VA = VB.

∴ Work done in moving charge q0 = 10 µC from A to B is W = q0(VB − VA) = 0

Teacher's Note: Diagonal ends are equally far from the central charge, so they have equal potential.

Exam Note: Equal potential means zero work.

Question 20. Draw an equipotential surface in a uniform electric field. [CBSE (AI) 2008]

Solution.

E

In a uniform electric field the equipotential surfaces are parallel planes, drawn perpendicular to the field lines.

Teacher's Note: Equipotential planes are perpendicular to uniform field lines.

Exam Note: Draw parallel planes crossing field lines at right angles.

Question 21. A point charge Q is placed at point O as shown in the figure. The potential difference VA − VB is positive. Is the charge Q negative or positive? [CBSE (F) 2016]

Solution.

QOAB

We know that V = (1/4πε0)(Q/r), so V ∝ 1/r. The potential due to a point charge decreases with increase of distance.

VA − VB > 0 ⇒ VA > VB. Hence, the charge Q is positive.

Teacher's Note: A is closer than B and has higher potential, which happens only for a positive charge.

Exam Note: Use V proportional to 1/r.

Question 22. Depict the equipotential surfaces for a system of two identical positive point charges placed a distance ‘d’ apart. [CBSE Delhi 2010]

Solution.

Equipotential surfaces due to two identical charges is shown in figure.

++

Teacher's Note: Near each charge the surfaces are circles; farther out they merge around both charges.

Exam Note: Draw circles around each charge merging outside.

Question 23. Draw an equipotential surface for a system consisting of two charges Q, −Q separated by a distance r in air. Locate the points where the potential due to the dipole is zero. [CBSE Delhi 2017, (AI) 2008, 2013]

Solution.

The equipotential surface for the system is as shown. Electric potential is zero at all points in the plane passing through the dipole equator AB.

+−ABQ−Q

Teacher's Note: The perpendicular bisecting plane of a dipole is at zero potential.

Exam Note: Mark the plane AB as zero potential.

Question 24. Why is the potential inside a hollow spherical charged conductor constant and has the same value as on its surface? [CBSE (F) 2012]

Solution.

Electric field intensity is zero inside the hollow spherical charged conductor. So, no work is done in moving a test charge inside the conductor and on its surface. Therefore, there is no potential difference between any two points inside or on the surface of the conductor.

VA − VB = −∫ E · dl = 0 ⇒ VA = VB = constant

Teacher's Note: Field is zero inside, so no work is needed to move a charge there.

Exam Note: Zero field implies zero potential difference.

Question 25. A charge ‘q’ is moved from a point A above a dipole of dipole moment ‘p’ to a point B below the dipole in equatorial plane without acceleration. Find the work done in the process. [CBSE Central 2016]

Solution.

Work done in the process is zero. Because, equatorial plane of a dipole is equipotential surface and work done in moving charge on equipotential surface is zero.

W = qVAB = q × 0 = 0

Teacher's Note: The equatorial plane of a dipole is at zero potential.

Exam Note: Say zero; equatorial plane is equipotential.

Question 26. Why is there no work done in moving a charge from one point to another on an equipotential surface? [CBSE (F) 2012]

Solution.

The potential difference between any two points of equipotential surface is zero. We have V1 − V2 = W/q = 0 ⇒ W = 0.

Therefore, the work done in moving a charge on an equipotential surface is zero.

Teacher's Note: Work equals charge times potential difference, which is zero on such a surface.

Exam Note: Use W = q(V1 − V2) with equal potentials.

Question 27. Figure shows the field lines due to a negative point charge. Give the sign of the potential energy difference of a small negative charge between the points A and B. [CBSE (F) 2014]

Solution.

−AB

The potential energy of the two charges is U = (1/4πε0)(q1q2/r), which is positive for two negative charges.

Since rA < rB, kq1q2/rA > kq1q2/rB, so UA > UB. Therefore, UA − UB is positive.

Teacher's Note: Like charges repel, so potential energy is higher where they are closer.

Exam Note: Compare rA and rB in U = kq1q2/r.

Question 28. What is the amount of work done in moving a point charge Q around a circular arc of radius ‘r’ at the centre of which another point charge ‘q’ is located? [CBSE North 2016]

Solution.

qAB

The potential of points A and B are same, being equal to VA = VB = (1/4πε0)(q/r), where r is the radius of the circle.

Work done W = Q(VB − VA) = Q(VA − VA) = 0.

Teacher's Note: All points on the circle are equally far from the central charge, so potential is equal.

Exam Note: Say zero; same potential on the arc.

Question 29. A metal plate is introduced between the plates of a charged parallel plate capacitor. What is its effect on the capacitance of the capacitor? [CBSE (F) 2009]

Solution.

By introducing the metal plate between the plates of charged capacitor, the capacitance of capacitor increases.

Reason: If t is thickness of metal plate, then C = ε0A/[d − t(1 − 1/K)]. For metal plate K = ∞, so C = ε0A/(d − t), which is greater than ε0A/d.

Teacher's Note: A metal slab reduces the effective separation, so capacitance rises.

Exam Note: Give C = ε0A/(d − t).

Question 30. The figure shows the field lines of a positive point charge. What will be the sign of the potential energy difference of a small negative charge between the points Q and P? Justify your answer. [CBSE Guwahati 2015]

Solution.

+PQ

The potential energy of the small negative charge is lower near the positive charge, so UP < UQ. Hence the potential energy difference UQ − UP is positive.

This is because the attractive force does positive work when the negative charge moves from Q to P, so the potential energy decreases.

Teacher's Note: A negative charge has lower potential energy closer to a positive charge.

Exam Note: Say positive; give attraction reason.

Question 31. Show diagrammatically the arrangement of four point electric charges of equal magnitude placed at four corners of a square such that the electric field as well as the electric potential at the centre of the square is non-zero.

Solution.

For the following arrangement of four point electric charges of equal magnitude (three positive and one negative), the electric field as well as electric potential at the centre of the square will be non-zero.

+++−O

The fields of the two positive charges on one diagonal cancel, while the fields of the positive and negative charges on the other diagonal add. The potentials add to 2kq/r, which is non-zero.

Teacher's Note: Charges on one diagonal should cancel fields; the other diagonal should have unlike charges.

Exam Note: Use three equal positive charges and one negative.

Question 32. Show that the equipotential surfaces are closed together in the regions of strong field and far apart in the regions of weak field. Draw equipotential surfaces for an electric dipole. [CBSE Sample Paper 2016]

Solution.

Equipotential surfaces are closer together in the regions of strong field and farther apart in the regions of weak field.

E = −dV/dr, that is E = negative potential gradient. For the same change in dV, dr = −dV/E, where ‘dr’ represents the distance between equipotential surfaces. So dr is small where E is large and dr is large where E is small.

+−AB

Teacher's Note: Spacing between surfaces for a fixed potential step is inversely proportional to field strength.

Exam Note: Use E = −dV/dr; draw dipole surfaces.

Question 33. Concentric equipotential surfaces due to a charged body placed at the centre are shown. Identify the polarity of the charge and draw the electric field lines due to it. [HOTS][CBSE Sample Paper 2016]

Solution.

−40 V30 V20 V10 V

For a single charge the potential is given by V = (1/4πε0)(q/r). This shows that V is constant if r is constant. For a positive charge, greater the radius smaller will be the potential. In the given figure, potential is increasing with radius. This shows that the polarity of charge is negative (−q). The direction of electric field will be radially inward. The field lines are directed from higher to lower potential.

Teacher's Note: Potential rising with distance means the central charge is negative; field lines point inward.

Exam Note: Say negative; draw radially inward lines.

Question 34. A uniform electric field exists between two charged plates as shown in the fig. What should be the work done in moving a charge q along the closed rectangular path ABCDA? [HOTS]

Solution.

+−+−+−+−+−+−ABCDE →

Work done in an electric field is independent of the path and depends only on the initial and final positions.

Here initial and final points are coincident. Work = q × (Vfinal − Vinitial) = q(VA − VA) = 0

So, net work done is zero.

Teacher's Note: The electrostatic force is conservative, so work around a closed path is zero.

Exam Note: Say zero; start and end coincide.

Question 35. The capacitance of a charged capacitor is C and the energy stored in it is U. What is the value of charge on the capacitor?

Solution.

Energy stored U = Q2/2C, where Q is charge on capacitor.

⇒ Q2 = 2CU ⇒ Charge, Q = √(2CU)

Teacher's Note: Rearrange U = Q²/2C for Q.

Exam Note: Give Q = √(2CU).

Question 36. Sketch graph to show how charge Q given to a capacitor of capacitance C varies with the potential difference.

Solution.

The graph of charge (Q) versus potential difference (V) is a straight line whose slope is equal to capacitance ‘C’.

VQSlope Q/V = Cθ

Teacher's Note: Since Q = CV, the graph is a straight line through the origin.

Exam Note: Draw straight line; slope equals C.

Question 37. Define dielectric constant of a medium. What is the value of dielectric constant for a metal?

Solution.

The dielectric constant of a medium is defined as the ratio of permittivity of medium to the permittivity of free space. The dielectric constant is also called the relative permittivity of medium: εr = K = ε/ε0.

The value of dielectric constant for a metal is infinity i.e., Kmetal = ∞.

Teacher's Note: Dielectric constant compares the medium’s permittivity with that of free space.

Exam Note: Define as ε/ε0; metal is infinite.

Question 38. Express dielectric constant of a medium in terms of capacitance. What is its SI unit?

Solution.

The dielectric constant of a medium is defined as the ratio of capacitance of capacitor when filled with a medium to capacitance of same capacitor when medium is removed, i.e., K = Cmedium/Cair (or Cvacuum).

It has no unit.

Teacher's Note: Dielectric constant is a ratio of two capacitances, so it is unitless.

Exam Note: Write K = C medium / C vacuum; no unit.

Question 39. The graph shows the variation of voltage ‘V’ across the plates of two capacitors A and B versus increase of charge ‘Q’ stored on them. Which of the two capacitors has higher capacitance? Give reason for your answer. [HOTS]

Solution.

QVAB

C = Q/V = 1/(Slope of line)

As the slope of the line for A is greater than that of B, the capacitance of A is smaller. Hence capacitor B has the higher capacitance.

Teacher's Note: Capacitance is the reciprocal of the slope of the V–Q line.

Exam Note: Compare slopes; steeper line means smaller C.

Question 40. The graph shown here shows the variation of total energy (E) stored in a capacitor against the value of the capacitance (C) itself. Which of the two: the charge on capacitor or the potential used to charge it, is kept constant for this graph? [HOTS]

Solution.

CE

The given graph represents E ∝ 1/C.

This is satisfied by the expression E = q2/2C ∝ 1/C for constant q.

That is, the charge (q) is kept constant.

Teacher's Note: Energy that falls as 1/C matches U = q²/2C at constant charge.

Exam Note: Match E ∝ 1/C with q²/2C.

Question 41. If a point charge is rotated in an arc of radius r around a charge q, what will be the work done? Explain. [HOTS]

Solution.

qrq0

All points of circle of radius r are at same potential, hence work done is zero.

Teacher's Note: Every point on the arc is at the same distance from q, so same potential.

Exam Note: Say zero; arc is equipotential.

Question 42. “Gauss’s law in electrostatics is true for any closed surface, no matter what its shape or size is.” Justify this statement with the help of a suitable example. [HOTS]

Solution.

According to Gauss theorem, the electric flux through a closed surface depends only on the net charge enclosed by the surface and not upon the shape or size of the surface.

For any closed arbitrary shape of the surface enclosing a charge the outward flux is the same as that due to a spherical Gaussian surface enclosing the same charge.

Justification: This is due to the fact that (i) electric field is radial and (ii) the electric field E ∝ 1/R2, while the area of the surface subtending a given solid angle at the charge increases as R2. So E × area stays the same, whatever the shape or size.

Teacher's Note: Flux depends only on enclosed charge because the field is radial and falls as 1/r².

Exam Note: Compare an arbitrary surface with a sphere.

Class 12 Mathematics: Xam Idea Solutions for Xam Idea Solutions Class 12 Physics Chapter 2 Electrostatic Potential And Capacitance Very Short Answer Questions

Access Class 12 Mathematics Solutions

Access the complete chapter-wise PDF for Xam Idea Solutions Class 12 Physics Chapter 2 Electrostatic Potential And Capacitance Very Short Answer Questions. These structured Xam Idea Solutions solutions for Class 12 Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.

Mastering Core Concepts with Xam Idea Solutions

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Additional Study Materials for 2026

Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.

FAQs

What are these [current-page:node:field_author] Solutions for Class 12 Physics?

They are chapter-wise solved questions from the book for Class 12 Physics. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 12 Physics Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 12 Physics?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 12 Physics questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 12 Physics Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.