Xam Idea Solutions Class 12 Physics Chapter 2 Electrostatic Potential And Capacitance Short Answer Questions II

Solutions for Class 12 Physics: Chapter 02 Electrostatic Potential And Capacitance

Access comprehensive textbook solutions for Chapter 02 Electrostatic Potential And Capacitance using the reference material for Class 12 Physics. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.

Practice Class 12 Physics Solutions: Chapter 02 Electrostatic Potential And Capacitance

Access the complete solution PDF for Class 12 Physics below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

Short Answer Questions II

Question 1. Define an equipotential surface. Draw equipotential surfaces: (i) In the case of a single point charge and (ii) In a constant electric field in Z-direction. Why the equipotential surfaces about a single charge are not equidistant? (iii) Can electric field exist tangential to an equipotential surface? Give reason. [CBSE Central 2016]

Solution.

An equipotential surface is the surface with a constant value of potential at all points on the surface.

(i) In case of a single point charge: here point charge is positive; if it is negative then electric field will be radially inward but equipotential surfaces are same and are concentric spheres with centres at the charge.

+Point charge, field lines (radial), equipotential surfaces (spheres)

(ii) In case of electric field in Z-direction: the equipotential surfaces are planes parallel to the X–Y plane, perpendicular to the field.

Z(X–Y) planesE along Z

Potential of a point charge at a distance r = (1/4πε0)(q/r), so V ∝ 1/r. Hence equipotential surfaces about a single charge are not equidistant.

(iii) No. If the field lines were tangential, work would be done in moving a charge on the surface, which goes against the definition of equipotential surface.

Teacher's Note: Equipotential surfaces are always perpendicular to field lines; for a point charge they are spheres.

Exam Note: Draw spheres and parallel planes; give reasons.

Question 2. Show that the potential energy of a dipole making angle θ with the direction of the field is given by U(θ) = −p · E. Hence find out the amount of work done in rotating it from the position of unstable equilibrium to the stable equilibrium. [CBSE East 2016]

Solution.

The potential energy of an electric dipole in an electric field is defined as the work done in bringing the dipole from infinity to its present position in the electric field.

Suppose the dipole is brought from infinity and placed at orientation θ with the direction of electric field. The work done in this process may be supposed to be done in two parts. (i) The work done (W1) in bringing the dipole perpendicular to electric field from infinity. (ii) Work done (W2) in rotating the dipole such that it finally makes an angle θ from the direction of electric field.

Let the dipole be brought from infinity such that its dipole moment p always remains perpendicular to electric field E. The electric forces on charges +q and −q are qE along the field direction and opposite to field direction respectively. As charges +q and −q traverse equal distance under equal and opposite forces, net work done in bringing the dipole in the region of electric field perpendicular to field direction is zero, i.e., W1 = 0.

−q+qθp

Now the dipole is rotated and brought to orientation making an angle θ with the field direction (i.e., θ0 = 90° and θ1 = θ), therefore, work done W2 = pE(cosθ0 − cosθ1) = pE(cos 90° − cos θ) = −pE cos θ.

∴ Total work done in bringing the electric dipole from infinity, i.e., electric potential energy of electric dipole U = W1 + W2 = 0 − pE cos θ = −pE cos θ. In vector form U = −p · E.

For rotating the dipole from position of unstable equilibrium (θ = 180°) to the stable equilibrium (θ = 0°): Wreq = pE(cos 180° − cos 0°) = pE(−1 − 1) = −2pE (the field does work 2pE).

Teacher's Note: Potential energy of a dipole is the work done in rotating it from the perpendicular position.

Exam Note: Show W1 = 0, W2 = −pE cosθ, then −2pE.

Question 3. Three concentric metallic shells A, B and C of radii a, b and c (a < b < c) have surface charge densities +σ, −σ and +σ respectively as shown in the figure. If shells A and C are at the same potential, then obtain the relation between the radii a, b and c. [CBSE (F) 2014]

Solution.

ABC−σ+σ+σabc

Charge on shell A, qA = 4πa2σ. Charge on shell B, qB = −4πb2σ. Charge on shell C, qC = 4πc2σ.

Potential of shell A: any point on the shell A lies inside the shells B and C. VA = (1/4πε0)[qA/a + qB/b + qC/c] = (1/4πε0)[4πa2σ/a − 4πb2σ/b + 4πc2σ/c] = (σ/ε0)(a − b + c).

Potential of shell C: any point on shell C lies outside the shells A and B. VC = (1/4πε0)[qA/c + qB/c + qC/c] = (σ/ε0)[(a2 − b2)/c + c].

Now, VA = VC, so a − b + c = (a2 − b2)/c + c, so a − b = (a − b)(a + b)/c, hence a + b = c.

Teacher's Note: Potential of each shell is the sum of contributions kq/r from all shells.

Exam Note: Equate VA and VC to get a + b = c.

Question 4. A parallel plate capacitor each with plate area A and separation ‘d’ is charged to a potential difference V. The battery used to charge it is then disconnected. A dielectric slab of thickness d and dielectric constant K is now placed between the plates. What change if any, will take place in (i) Charge on the plates, (ii) Electric field intensity between the plates, (iii) Capacitance of the capacitor. Justify your answer in each case. [CBSE (F) 2010]

Solution.

Initial capacitance Co = ε0A/d, potential difference = V.

(i) Initial charge qo = CoV = (ε0A/d)V. When the battery is disconnected, the charge on the capacitor remains unchanged and equal to q = qo = (ε0A/d)V.

(ii) Initial electric field between the plates E0 = σ/ε0 = q/Aε0. After introduction of dielectric, the permittivity of medium becomes Kε0, so final electric field between the plates E = q/AKε0 = E0/K, i.e., electric field reduces to 1/K times.

(iii) After introduction of the dielectric, the capacitance becomes KC0 = Kε0A/d.

Teacher's Note: With the battery removed, charge stays fixed; the dielectric weakens the field and raises capacitance.

Exam Note: Charge unchanged, E becomes E/K, C becomes KC.

Question 5. A parallel plate capacitor is charged by a battery, which is then disconnected. A dielectric slab is then inserted in the space between the plates. Explain what changes if any, occur in the values of: (i) Capacitance (ii) Potential difference between the plates (iii) Electric field between the plates, and (iv) The energy stored in the capacitor. [CBSE Delhi 2010, (AI) 2009, 2012]

Solution.

(i) The capacitance of the capacitor increases to K times (since C = Kε0A/d ∝ K).

(ii) The potential difference between the plates becomes 1/K times. Reason: V = Q/C; Q same, C increases to K times, so V′ = V/K.

(iii) As E = V/d and V is decreased, the electric field decreases to 1/K times.

(iv) Energy stored will be decreased. The energy becomes U = Q02/2KC0 = U0/K. Thus, energy is reduced to 1/K times the initial energy.

Teacher's Note: With fixed charge, raising C lowers V, E and the stored energy by the factor K.

Exam Note: Charge constant; C up K times; V, E, U down.

Question 6. A parallel plate is charged by a battery. When the battery remains connected, a dielectric slab is inserted in the space between the plates. Explain what changes if any, occur in the values of: (i) Potential difference between the plates (ii) Capacitance (iii) Charge on the plates (iv) Energy stored in the capacitor? (v) Electric field strength between the plates. [CBSE Delhi 2010]

Solution.

(i) When battery remains connected, the potential difference remains the same.

(ii) The capacitance of capacitor increases as K > 1.

(iii) The charge Q = CV; V = same, C increases; therefore, charge on plates increases.

(iv) Energy stored by capacitor U = ½CV2 also increases.

(v) As electric field E = V/d, V = constant and d = constant; therefore, electric field strength remains the same.

Teacher's Note: With the battery connected, voltage stays fixed while capacitance, charge and energy rise.

Exam Note: V and E constant; C, Q, U increase.

Question 7. Answer the following questions: (i) Find equivalent capacitance between A and B in the combination given below. Each capacitor is of 2 µF capacitance. (ii) If a dc source of 7 V is connected across AB, how much charge is drawn from the source and what is the energy stored in the network? [CBSE Delhi 2017]

Solution.

C1C2C3C4C5ABPRST

(i) Capacitors C2, C3 and C4 are in parallel (the extra connecting wires join P with S and R with T): C234 = C2 + C3 + C4 = 2 µF + 2 µF + 2 µF = 6 µF.

Capacitors C1, C234 and C5 are in series: 1/Ceq = 1/C1 + 1/C234 + 1/C5 = 1/2 + 1/6 + 1/2 = 7/6 µF−1, so Ceq = 6/7 µF.

(ii) Charge drawn from the source Q = CeqV = (6/7) × 7 µC = 6 µC.

Energy stored in the network, U = Q2/2C = (6 × 10−6)2 × 7/(2 × 6 × 10−6) J = 21 × 10−6 J = 21 µJ.

Teacher's Note: Identify the parallel group first, then the series chain of three.

Exam Note: Find 6/7 µF, charge 6 µC, energy 21 µJ.

Question 8. Two parallel plate capacitors X and Y have the same area of plates and same separation between them. X has air between the plates while Y contains a dielectric medium εr = 4. [CBSE Delhi 2016] The capacitors are connected in series to a 15 V battery. (i) Calculate the capacitance of each capacitor if equivalent capacitance of the combination is 4 µF. (ii) Calculate the potential difference between the plates of X and Y. (iii) Estimate the ratio of electrostatic energy stored in X and Y.

Solution.

XY15 V

(i) Capacitance of X, Cx = ε0A/d. Capacitance of Y, CY = εrε0A/d = 4ε0A/d. ∴ CY/CX = 4, so CY = 4CX ... (i)

As X and Y are in series, Ceq = CXCY/(CX + CY) = 4CX2/5CX = 4 µF, so CX = 5 µF and CY = 4CX = 20 µF.

(ii) In series, charge on each capacitor is same, so V = Q/C ⇒ V ∝ 1/C. ∴ VX/VY = CY/CX = 4, so VX = 4VY ... (ii). Also VX + VY = 15 ... (iii). From (ii) and (iii), 4VY + VY = 15, so VY = 3 V and VX = 12 V.

(iii) Energy stored in X/energy stored in Y = (Q′2/2CX)/(Q′2/2CY) = CY/CX = 4/1, so UX/UY = 4/1.

Teacher's Note: Series capacitors carry the same charge, so voltage divides inversely to capacitance.

Exam Note: Find Cx, Cy, then voltages 12 V and 3 V.

Question 9. In a parallel plate capacitor with air between the plates, each plate has an area of 5 × 10−3 m2 and the separation between the plates is 2.5 mm. [CBSE (F) 2014] (i) Calculate the capacitance of the capacitor. (ii) If this capacitor is connected to 100 V supply, what would be the charge on each plate? (iii) How would charge on the plates be affected, if a 2.5 mm thick mica sheet of K = 8 is inserted between the plates while the voltage supply remains connected?

Solution.

(i) Capacitance C = ε0A/d = (8.85 × 10−12 × 5 × 10−3)/(2.5 × 10−3) = 17.7 × 10−12 F = 17.7 pF.

(ii) Charge Q = CV = 17.7 × 10−12 × 100 = 1.77 × 10−9 C.

(iii) With the mica sheet filling the gap and voltage remaining connected, new charge Q′ = KQ = 8 × 1.77 × 10−9 = 1.416 × 10−8 C, so the charge becomes 8 times.

Teacher's Note: Capacitance is ε0A/d; a full dielectric multiplies it, and charge, by K.

Exam Note: Compute C, Q = CV, then multiply by K.

Question 10. A capacitor of unknown capacitance is connected across a battery of V volts. The charge stored in it is 360 µC. When potential across the capacitor is reduced by 120 V, the charge stored in it becomes 120 µC. Calculate: (i) The potential V and the unknown capacitance C. (ii) What will be the charge stored in the capacitor, if the voltage applied had increased by 120 V? [CBSE Delhi 2013]

Solution.

(i) If unknown capacitor of capacitance ‘C’ is connected to a battery of ‘V’ volts, Q = CV, so CV = 360 µC ... (i)

On reducing the potential by 120 V: Q′ = C(V − 120), so C(V − 120) = 120 µC ... (ii)

Subtracting (ii) from (i): 120C = 240 µC, so C = 2 µF. Then V = 360/2 = 180 V.

(ii) If the voltage applied had increased by 120 V, V″ = 180 + 120 = 300 V, so charge Q″ = CV″ = 2 µF × 300 V = 600 µC.

Teacher's Note: Two charge–voltage equations let you solve for both C and V.

Exam Note: Subtract equations to get C = 2 µF.

Question 11. A parallel plate capacitor of capacitance C is charged to a potential V. It is then connected to another uncharged capacitor having the same capacitance. Find out the ratio of the energy stored in the combined system to that stored initially in the single capacitor. [CBSE (AI) 2014]

Solution.

Energy stored in the capacitor initially, Ui = ½CV2 = q2/2C.

Net capacitance of the parallel combination (when the capacitors are connected together) = C + C = 2C.

Since the total charge q remains the same, final energy Uf = q2/2(2C) = q2/4C.

∴ Uf/Ui = 1 : 2.

Teacher's Note: Charge is conserved on sharing; capacitance doubles so energy halves.

Exam Note: Use U = q²/2C with C doubled; ratio 1:2.

Question 12. Calculate the equivalent capacitance between points A and B in the circuit below. If a battery of 10 V is connected across A and B, calculate the charge drawn from the battery by the circuit. [CBSE East 2016]

Solution.

C1 = 10 µFC2 = 20 µFC3 = 5 µFC4 = 10 µF50 µFABPR

Here C1/C2 = 10/20 = 1/2 and C3/C4 = 5/10 = 1/2, so C1/C2 = C3/C4.

This is the condition of balance (balanced bridge), so there will be no current across PR (50 µF capacitor).

Now C1 and C2 are in series: C12 = C1C2/(C1 + C2) = (10 × 20)/(10 + 20) = 200/30 = 20/3 µF. C3 and C4 are in series: C34 = (5 × 10)/(5 + 10) = 50/15 = 10/3 µF.

The two branches are in parallel: equivalent capacitance between A and B, CAB = C12 + C34 = 20/3 + 10/3 = 10 µF.

Hence, charge drawn from battery Q = CV = 10 × 10 µC = 100 µC = 10−4 C.

Teacher's Note: A balanced capacitor bridge carries no charge in its middle capacitor, so it can be ignored.

Exam Note: Check balance, ignore 50 µF, then series then parallel.

Question 13. Two capacitors of unknown capacitances C1 and C2 are connected first in series and then in parallel across a battery of 100 V. If the energy stored in the two combinations is 0.045 J and 0.25 J respectively, determine the value of C1 and C2. Also calculate the charge on each capacitor in parallel combination. [CBSE Delhi 2015]

Solution.

Energy stored in a capacitor, E = ½CV2.

In parallel, 0.25 = ½(C1 + C2)(100)2 ... (i)

In series, 0.045 = ½[C1C2/(C1 + C2)](100)2 ... (ii)

From (i), C1 + C2 = 0.25 × 2 × 10−4 = 5 × 10−5 F ... (iii)

From (ii), C1C2/(C1 + C2) = 0.045 × 2 × 10−4 = 9 × 10−6.

From (iii), C1C2 = 9 × 10−6 × 5 × 10−5 = 4.5 × 10−10.

C1 − C2 = √[(C1 + C2)2 − 4C1C2] = 2.64 × 10−5 F ... (iv)

Solving (iii) and (iv): C1 = 38.2 µF and C2 = 11.8 µF.

In parallel: Q1 = C1V = 38.2 × 10−6 × 100 = 38.2 × 10−4 C. Q2 = C2V = 11.8 × 10−6 × 100 = 11.8 × 10−4 C.

Teacher's Note: Get sum and product of the capacitances, then solve the resulting quadratic.

Exam Note: Use sum 50 µF, product 450 µF².

Question 14. Two capacitors of capacitance 10 µF and 20 µF are connected in series with a 6 V battery. After the capacitors are fully charged, a slab of dielectric constant (K) is inserted between the plates of the two capacitors. How will the following be affected after the slab is introduced: (a) The electric field energy stored in the capacitors? (b) The charges on the two capacitors? (c) The potential difference between the plates of the capacitors? Justify your answer. [CBSE Bhubaneshwar 2015]

Solution.

Let Q be the charge on each capacitor. So Q = [C1C2/(C1 + C2)]V.

Initial electric field energy in each capacitor: U1 = ½Q2/C1 and U2 = ½Q2/C2.

On inserting the dielectric slab, the capacitance of each capacitor becomes C1′ = KC1 and C2′ = KC2, and the equivalent capacitance becomes C′eq = (KC1 × KC2)/(KC1 + KC2) = K[C1C2/(C1 + C2)].

New charge on each capacitor (battery remains connected): Q′ = C′eqV = K × [C1C2/(C1 + C2)] × V = KQ.

(a) New electric field energy: U′1 = Q′2/2KC1 = KQ2/2C1 and U′2 = KQ2/2C2, i.e., the electric field energy increases (K times) in each capacitor.

(b) Q′ = KQ, i.e., the charge on each capacitor increases K times.

(c) V′1 = Q′/C′1 = KQ/KC1 = Q/C1 and V′2 = KQ/KC2 = Q/C2, i.e., the potential difference across each capacitor remains the same.

Teacher's Note: Both capacitances scale by K, so series charge scales by K and each voltage is unchanged.

Exam Note: Energy and charge up K times; voltages unchanged.

Question 15. A 12 pF capacitor is connected to a 50 V battery. How much electrostatic energy is stored in the capacitor? If another capacitor of 6 pF is connected in series with it with the same battery connected across the combination, find the charge stored and potential difference across each capacitor. [CBSE Delhi 2017]

Solution.

Electrostatic energy stored, U = ½CV2 = ½ × 12 × 10−12 × 50 × 50 J = 1.5 × 10−8 J.

Let C be the equivalent capacitance of 12 pF and 6 pF in series: 1/C = 1/12 + 1/6 = (1 + 2)/12 = 1/4, so C = 4 pF.

Charge stored across each capacitor Q = CV = 4 × 10−12 × 50 = 2 × 10−10 C. In series combination, charge on each capacitor is the same, so the charge on the 12 pF as well as the 6 pF capacitor is 2 × 10−10 C.

∴ Potential difference across the 12 pF capacitor, V1 = Q/C1 = 2 × 10−10/(12 × 10−12) = 50/3 V.

Potential difference across the 6 pF capacitor, V2 = 2 × 10−10/(6 × 10−12) = 100/3 V.

Teacher's Note: In series the charge is common; voltage divides inversely with capacitance.

Exam Note: Find series C, common charge, then V = Q/C each.

Question 16. Two identical capacitors of 12 pF each are connected in series across a battery of 50 V. How much electrostatic energy is stored in the combination? If these were connected in parallel across the same battery, how much energy will be stored in the combination now? Also find the charge drawn from the battery in each case. [CBSE Delhi 2017]

Solution.

In series combination: 1/Cs = 1/12 + 1/12 = 1/6, so Cs = 6 × 10−12 F.

Us = ½CsV2 = ½ × 6 × 10−12 × 2500 J = 75 × 10−10 J = 7.5 × 10−9 J.

Qs = CsV = 6 × 10−12 × 50 = 300 × 10−12 C = 3 × 10−10 C.

In parallel combination: Cp = (12 + 12) pF = 24 × 10−12 F.

Up = ½ × 24 × 10−12 × 2500 J = 3 × 10−8 J.

Qp = CpV = 24 × 10−12 × 50 C = 1.2 × 10−9 C.

Teacher's Note: Series halves capacitance, parallel doubles it; compare energies with ½CV².

Exam Note: Series 6 pF, parallel 24 pF; compute U and Q.

Question 17. In the given circuit in the steady state, obtain the expression for (a) the potential drop (b) the charge and (c) the energy stored in the capacitor, C. [CBSE (F) 2015]

Solution.

VRVC2V2RABCFED

(a) In steady state BE will behave as an open circuit (no current through the capacitor branch).

In steady state, current in the circuit ACDFA: I = (2V − V)/(2R + R) = V/3R.

Taking the potential of the left wire (A, B, C) as zero, potential at point E = 2V − 2IR = 2V − 2R × (V/3R) = 4V/3.

Potential difference across EB (the capacitor) = 4V/3 − V = V/3. Hence, potential drop across the capacitor is V/3.

(b) Charge on the capacitor q = C(V/3) = CV/3.

(c) Energy stored in the capacitor U = ½C(V/3)2 = CV2/18.

Teacher's Note: In steady state no current flows in the capacitor branch, so find the loop current first.

Exam Note: Loop current V/3R; capacitor voltage V/3.

Question 18. Calculate the potential difference and the energy stored in the capacitor C2 in the circuit shown in the figure. Given potential at A is 90 V, C1 = 20 µF, C2 = 30 µF, C3 = 15 µF. [CBSE Allahabad 2015]

Solution.

C1C2C3AV

Capacitors C1, C2 and C3 are in series. So, its net capacitance is 1/Cs = 1/C1 + 1/C2 + 1/C3 = 1/20 + 1/30 + 1/15 = 9/60, so Cs = 20/3 µF.

Net charge on the capacitors C1, C2 and C3 remains same: q = Cs(VA − VE) = (20/3) µF × (90 − 0) = 600 µC.

The p.d. across C2 due to charge 600 µC is V2 = q/C2 = 600/30 = 20 V.

Energy stored in the capacitor C2, U2 = ½q2/C2 (or ½C2V22) = ½ × 30 µF × (20)2 = 6000 µJ = 6 × 10−3 J.

Teacher's Note: Series capacitors share one charge; find it from the equivalent capacitance first.

Exam Note: Charge 600 µC, V2 = 20 V, U2 = 6 mJ.

Question 19. In the following arrangement of capacitors, the energy stored in the 6 µF capacitor is E. Find the value of the following: (i) Energy stored in 12 µF capacitor. (ii) Energy stored in 3 µF capacitor. (iii) Total energy drawn from the battery. [CBSE (F) 2016]

Solution.

+6 µF12 µF3 µF

Given that energy stored in 6 µF is E. Let V be the voltage across the 6 µF capacitor: E = ½CV2 = ½ × 6 × V2, so V = √(E/3).

(i) The 6 µF and 12 µF capacitors are in parallel, so the voltage across the 12 µF = voltage across the 6 µF capacitor. Energy stored in 12 µF = ½ × 12 × (√(E/3))2 = 2E.

(ii) Since charge remains constant in series, the sum of charge on the 6 µF and 12 µF capacitors is equal to the charge on the 3 µF capacitor. Using Q = CV, charge on the 3 µF capacitor = (6 + 12) × V = 18V. Energy stored in 3 µF = Q2/2C = (18V)2/(2 × 3) = (18 × 18/6)(E/3) = 18E.

(iii) Total energy drawn from the battery = E + 2E + 18E = 21E.

Teacher's Note: Parallel capacitors share voltage; the series element carries the total charge.

Exam Note: Energies 2E and 18E; total 21E.

Question 20. Two identical parallel plate (air) capacitors C1 and C2 have capacitances C each. The space between their plates is now filled with dielectrics as shown. If the two capacitors still have equal capacitance, obtain the relation between dielectric constants K, K1 and K2. [Hots] [CBSE (F) 2011]

Solution.

KK1K2C1C2ddl/2l/2

Let A be the area of each plate. Initially C1 = C = ε0A/d = C2 ... (i)

After inserting the respective dielectric slabs: C1′ = KC and C2′ = K1ε0(A/2)/d + K2ε0(A/2)/d = (ε0A/2d)(K1 + K2) = (C/2)(K1 + K2) ... (ii)

From (i) and (ii), C1′ = C2′, so KC = (C/2)(K1 + K2), hence K = ½(K1 + K2).

Teacher's Note: The two half-area slabs lie side by side, so their capacitances add in parallel.

Exam Note: K1 and K2 are in parallel; K = (K1 + K2)/2.

Question 21. You are given an air filled parallel plate capacitor C1. The space between its plates is now filled with slabs of dielectric constants K1 and K2 as shown in C2. Find the capacitances of the capacitor C2, if area of the plates is A and distance between the plates is d. [Hots] [CBSE (F) 2011]

Solution.

C1C2K1K2ddd/2d/2

C1 = ε0A/d.

The slabs, each of thickness d/2 and area A, are in series: 1/C2 = 1/[K1ε0A/(d/2)] + 1/[K2ε0A/(d/2)] = d/(2K1ε0A) + d/(2K2ε0A) = (d/2ε0A)[1/K1 + 1/K2].

∴ C2 = 2C1[K1K2/(K1 + K2)] = C1[2K1K2/(K1 + K2)] = 2ε0AK1K2/[d(K1 + K2)].

Teacher's Note: Slabs stacked along the field act as two capacitors in series.

Exam Note: Series of K1 and K2 slabs of thickness d/2.

Question 22. A slab of material of dielectric constant K has the same area as that of the plates of a parallel plate capacitor but has the thickness d/2, where d is the separation between the plates. Find out the expression for its capacitance when the slab is inserted between the plates of the capacitor. [Hots] [CBSE (AI) 2013]

Solution.

Dielectric (K)VacuumArea = Add/2 (slab)

Capacitance with dielectric slab of thickness t: C = ε0A/[d − t + t/K].

Put t = d/2: C = ε0A/[d − d/2 + d/2K] = ε0A/[d/2 + d/2K] = ε0A/[(d/2)(1 + 1/K)] = 2ε0AK/[d(K + 1)].

Teacher's Note: A partial slab effectively reduces the gap from d to d − t + t/K.

Exam Note: Substitute t = d/2 in the partial-slab formula.

Question 23. Two identical parallel plate capacitors A and B are connected to a battery of V volts with the switch S closed. The switch is now opened and the free space between the plates of the capacitors is filled with a dielectric of dielectric constant K. Find the ratio of the total electrostatic energy stored in both capacitors before and after the introduction of the dielectric. [CBSE (AI) 2017]

Solution.

EABS

Two capacitors are connected in parallel. Hence, the potential on each of them remains the same. So, the charge on each capacitor is QA = QB = CV.

Formula for energy stored = ½CV2 = ½Q2/C. Net capacitance with switch S closed = C + C = 2C, so energy stored = ½ × 2C × V2 = CV2.

After the switch S is opened, the capacitance of each capacitor = KC. In this case, voltage only across A remains the same (A is still connected to the battery).

Energy stored in capacitor A = ½KCV2.

For capacitor B (isolated), charge Q = CV remains the same, so its voltage changes to V′ = Q/C′ = Q/KC = V/K, and energy stored in capacitor B = ½Q2/KC = ½CV2/K.

∴ Total energy stored = ½KCV2 + ½CV2/K = ½CV2(K + 1/K) = ½CV2[(K2 + 1)/K].

Required ratio = CV2/{½CV2(K2 + 1)/K} = 2K/(K2 + 1).

Teacher's Note: Only the isolated capacitor keeps its charge; the connected one keeps its voltage.

Exam Note: A keeps V, B keeps Q; ratio 2K : (K²+1).

Class 12 Mathematics: Xam Idea Solutions for Xam Idea Solutions Class 12 Physics Chapter 2 Electrostatic Potential And Capacitance Short Answer Questions II

Complete Math Solutions for Xam Idea Solutions Class 12 Physics Chapter 2 Electrostatic Potential And Capacitance Short Answer Questions II

Review detailed solutions for Class 12 Mathematics. The Xam Idea Solutions Class 12 Physics Chapter 2 Electrostatic Potential And Capacitance Short Answer Questions II PDF provides comprehensive answers mapped to standard Xam Idea Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.

Concept-Driven Math Answers

Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.

Complete Your Class 12 Exam Preparation

Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.

FAQs

What are these [current-page:node:field_author] Solutions for Class 12 Physics?

They are chapter-wise solved questions from the book for Class 12 Physics. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 12 Physics Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 12 Physics?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 12 Physics questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 12 Physics Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.