Download Class 12 Physics Textbook Solutions: Chapter 01 Electric Charges And Fields
Explore reliable textbook solutions for Chapter 01 Electric Charges And Fields tailored for Class 12 learners using methodologies. Utilizing these Physics answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.
Access Textbook Answers and Solutions
View or download the dedicated Chapter 01 Electric Charges And Fields solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Physics.
Short Answer Questions I
Question 1. Answer the Following Questions. (i) Define electric flux. Write its SI unit. (ii) A spherical rubber balloon carries a charge that is uniformly distributed over its surface. As the balloon is blown up and increases in size, how does the total electric flux coming out of the surface change? Give reason. [CBSE (F) 2016]
Solution.
(i) Total number of electric field lines crossing a surface normally is called electric flux. Its SI unit is Nm2C–1 or Vm.
(ii) Total electric flux through the surface = q/ε0 (Gauss’s law)
As charge remains unchanged when size of balloon increases, electric flux through the surface remains unchanged.
Teacher's Note: Flux counts field lines through a surface, and enclosed charge is constant, so flux stays unchanged.
Exam Note: Define flux, give unit, cite Gauss's law.
Question 2. Two point electric charges of unknown magnitude and sign are placed at some distance‘d’ apart. The electric field intensity is zero at a point, not between the charges but on the line joining them. Write two essential conditions for this to happen.
Solution.
(i) The two charges must be of opposite kind.
(ii) The magnitude of two charges must be unequal. The charge closer to the point of observation should be of smaller magnitude.
Teacher's Note: Fields from opposite, unequal charges can cancel on the line outside the pair.
Exam Note: Give both conditions: opposite signs, unequal magnitudes.
Question 3. A point charge is placed at the centre of a closed Gaussian spherical surface of radius r. Electric flux passing through the surface is φ How is the electric flux φ through the surface affected when the following changes are made in turn: (i) The spherical surface is replaced by a cylindrical surface of the same radius? (ii) The point charge is replaced by an electric dipole? Justify your answer in each case.
Solution.
(i) Since the charge inside the Gaussian surface remains the same, the electric flux through it remains unchanged.
(ii) Since the net charge inside the surface is zero, the electric flux passing through the surface also becomes zero.
Teacher's Note: By Gauss's law flux depends only on enclosed net charge, not surface shape.
Exam Note: Cite net enclosed charge for each part.
Question 4. Define electric dipole moment. Is it a scalar or a vector quantity? What are its SI unit? [CBSE (AI) 2011, 2013, (F) 2009, 2012, 2013]
Solution.
The electric dipole moment is defined as the product of either charge and the distance between the two charges. Its direction is from negative to positive charge.
i.e., |p| = q(2l)
Electric dipole moment is a vector quantity.
Its SI unit is coulomb-metre.
Teacher's Note: Dipole moment p = q × 2l, directed from the negative to the positive charge; its unit is C m.
Exam Note: State magnitude, direction, vector nature and unit.
Question 5. Depict the orientation of the dipole in (a) stable, (b) unstable equilibrium in a uniform electric field. [CBSE Delhi 2017]
Solution.
(a) Stable equilibrium, θ = 0°; p is parallel to E.
(b) Unstable equilibrium, θ = 180°; p is anti parallel to E.
Teacher's Note: Torque vanishes at both angles, but only θ = 0° returns the dipole when slightly displaced.
Exam Note: Give both angles and relative directions of p and E.
Question 6. Two equal balls having equal positive charge ‘q’ coulombs are suspended by two insulating strings of equal length. What would be the effect on the force when a plastic sheet is inserted between the two? [CBSE AI 2014]
Solution.
Force will decrease.
Reason: Force between two charges each ‘q’ in vacuum is F0 = (1/4πε0)·q²/r²
On inserting a plastic sheet (a dielectric K > 1), F = (1/4πε0K)·q²/r², i.e., Force F = F0/K
Teacher's Note: A dielectric of constant K > 1 between the charges reduces the Coulomb force by factor K.
Exam Note: Write F = F0/K; force decreases.
Question 7. Plot a graph showing the variation of coulomb force (F) versus (1/r²), where r is the distance between the two charges of each pair of charges: (1 µC, 2 µC) and (2 µC, – 3 µC). Interpret the graphs obtained. [CBSE (AI) 2011]
Solution.
F = (1/4πε0)(q1q2/r²)
The graph between F and 1/r² is a straight line of slope (1/4πε0)q1q2 passing through origin in both the cases.
Since, magnitude of the slope is more for attraction, therefore, attractive force is greater than repulsive force.
Teacher's Note: Slope is q1q2/4πε0: 1.8 × 10⁻² for the 1 µC, 2 µC pair and 5.4 × 10⁻² for the other.
Exam Note: Straight line through origin; steeper slope means stronger force.
Question 8. Answer the following questions: (a) Define electric flux. Write its SI unit. (b) “Gauss’s law in electrostatics is true for any closed surface, no matter what its shape or size is.” Justify this statement with the help of a suitable example. [CBSE Allahabad 2015]
Solution.
(a) Total number of electric field lines crossing a surface normally is called electric flux. Its SI unit is Nm²C⁻¹ or Vm.
(b) According to Gauss theorem, the electric flux through a closed surface depends only on the net charge enclosed by the surface and not upon the shape or size of the surface.
For any closed arbitrary shape of the surface enclosing a charge the outward flux is the same as that due to a spherical Gaussian surface enclosing the same charge.
Justification: This is due to the fact that (i) Electric field is radial and (ii) the electric field E ∝ 1/R². The area of a sphere is proportional to R², so E × area stays constant and the flux through a sphere is q/ε0 whatever its radius.
Teacher's Note: Radial inverse-square field makes flux through spheres of any radius equal, and any closed surface intercepts the same lines.
Exam Note: Flux depends only on enclosed charge, not shape or size.
Question 9. Two concentric metallic spherical shells of radii R and 2R are given charges Q1 and Q2 respectively. The surface charge densities on the outer surfaces of the shells are equal. Determine the ratio Q1 : Q2. [CBSE (F) 2013]
Solution.
Surface charge density σ is the same on the outer surfaces.
Charge on outer surface of inner shell = Q1 = 4πR²σ
The outer shell carries –Q1 on its inner surface, so its outer surface carries Q1 + Q2 = 4π(2R)²σ = 16πR²σ.
∴ Q1 + Q2 = 4Q1, so Q2 = 3Q1
Q1 : Q2 = 1 : 3
Teacher's Note: Inner shell induces –Q1 inside the outer shell, so its outer surface holds Q1 + Q2, not Q2 alone.
Exam Note: Include induced charge on outer shell; ratio 1 : 3.
Question 10. The sum of two point charges is 7µ C. They repel each other with a force of 1 N when kept 30cm apart in free space. Calculate the value of each charge. [CBSE (F) 2009]
Solution.
q1 + q2 = 7 × 10⁻⁶ C … (1)
(1/4πε0)·q1q2/(0.30)² = 1 ⇒ q1q2 = (4πε0)(0.30)²
or q1q2 = (1/9×10⁹) × 9 × 10⁻² = 10⁻¹¹ … (2)
(q1 – q2)² = (q1 + q2)² – 4q1q2 = (7×10⁻⁶)² – 4×10⁻¹¹ = 49 × 10⁻¹² – 40 × 10⁻¹² = 9 × 10⁻¹²
q1 – q2 = 3 × 10⁻⁶ C … (3)
Solving (1) and (3), we get q1 = 5×10⁻⁶ C, q2 = 2×10⁻⁶ C
⇒ q1 = 5 µC, q2 = 2 µC
Teacher's Note: Coulomb’s law gives the product q1q2; with the given sum, (q1 – q2)² identity yields both charges.
Exam Note: Use sum and product to find the difference.
Question 11. Figure shows two large metal plates P1 and P2, tightly held against each other and placed between two equal and unlike point charges perpendicular to the line joining them. (i) What will happen to the plates when they are released? (ii) Draw the pattern of the electric field lines for the system. [CBSE (F) 2009]
Solution.
(i) Charges induced on outer surfaces of P1 and P2 are – Q and + Q respectively. When plates are released, they will tend to move away from one another; plate P1 moving towards + Q and P2 towards – Q due to attraction.
(ii) The field pattern is shown in fig.
Teacher's Note: Touching plates act as one conductor; induction puts –Q on the face near +Q, +Q near –Q.
Exam Note: Show induced charges on outer faces; lines normal to plates.
Question 12. Calculate the amount of work done in rotating a dipole, of dipole moment 3 × 10⁻⁸ Cm, from its position of stable equilibrium to the position of unstable equilibrium, in a uniform electric field of intensity 10⁴ N/C. [CBSE (F) 2011]
Solution.
p = 3 × 10⁻⁸ Cm; E = 10⁴ N/C
At stable equilibrium θ1 = 0°; at unstable equilibrium θ2 = 180°
Work done in rotating a dipole is given by:
W = pE(cos θ1 – cos θ2) = (3 × 10⁻⁸)(10⁴)[cos 0° – cos 180°] = 3 × 10⁻⁴ [1 – (–1)]
W = 6 × 10⁻⁴ J
Teacher's Note: Work equals pE(cos θ1 – cos θ2), which for a half-turn is 2pE.
Exam Note: Answer 2pE = 6 × 10⁻⁴ J.
Question 13. Given a uniform electric field E = 5 × 10³ î N/C, find the flux of this field through a square of 10 cm on a side whose plane is parallel to the Y-Z plane. What would be the flux through the same square if the plane makes a 30° angle with the X-axis? [CBSE Delhi 2014]
Solution.
Here, E = 5 × 10³ î N/C, i.e., field is along positive direction of X-axis.
Surface area, A = 10 cm × 10 cm = 0.10 m × 0.10 m = 10⁻² m²
(i) When plane is parallel to Y-Z plane, the normal to plane is along X-axis. Hence θ = 0°
φ = EA cos θ = 5 × 10³ × 10⁻² cos 0° = 50 N m² C⁻¹
(ii) When the plane makes a 30° angle with the X-axis, the normal to its plane makes 60° angle with X-axis. Hence θ = 60°
φ = EA cos θ = 5 × 10³ × 10⁻² cos 60° = 25 N m² C⁻¹
Teacher's Note: Flux uses the angle between E and the area normal; a plane tilted 30° has θ = 60°.
Exam Note: Angle is with the normal; flux 50 and 25 N m²/C.
Question 14. Answer the following questions. (i) An electrostatic field line is a continuous curve. That is, a field line cannot have sudden breaks. Why is it so? (ii) Explain why two field lines never cross each other at any point. [CBSE Delhi 2014]
Solution.
(i) An electrostatic field line is the path of movement of a positive test charge (q0 → 0). A moving charge experiences a continuous force in an electrostatic field, so an electrostatic field line is always a continuous curve.
(ii) Two electric lines of force can never cross each other because if they cross, there will be two directions of electric field at the point of intersection (say A); which is impossible.
Teacher's Note: Field direction at a point is unique (tangent to the line), so crossing would give two directions at A.
Exam Note: Mention unique tangent direction at each point.
Question 15. An electric dipole is held in a uniform electric field. (i) Show that the net force acting on it is zero. (ii) The dipole is aligned parallel to the field. Find the work done in rotating it through the angle of 180°. [CBSE (AI) 2012]
Solution.
(i) The dipole moment of dipole is |p| = q × (2a)
Force on –q at A = –qE
Force on +q at B = +qE
Net force on the dipole = qE – qE = 0
(ii) Work done in rotating the dipole from θ1 = 0° to θ2 = 180° is W = pE(cos θ1 – cos θ2) = pE(cos 0° – cos 180°) = pE[1 – (–1)] = 2pE
Teacher's Note: Equal and opposite forces qE on the two charges cancel; rotating by 180° from parallel costs 2pE.
Exam Note: Net force zero; work done 2pE.
Question 16. Draw the electric field lines due to a uniformly charged thin spherical shell when charge on the shell is (i) positive and (ii) negative.
Solution.
The electric field lines are shown in the figure. For a positively charged shell, the field lines are directed in radially outward direction and for negatively charged shell, these are directed in radially inward direction.
Teacher's Note: Lines are radial and normal to the surface; direction follows the sign of charge, and the inside has no field.
Exam Note: Outward for positive shell, inward for negative shell.
Question 17. Represent graphically the variation of electric field with distance, for a uniformly charged plane sheet. [CBSE Sample Paper 2017]
Solution.
Electric field due to a uniformly charged plane sheet is E = σ/2ε0, which is independent of distance.
So, it represents a straight line parallel to distance axis.
Teacher's Note: Infinite sheet gives uniform field σ/2ε0 on each side, so the E–r graph is a horizontal line.
Exam Note: Horizontal line at E = σ/2ε0.
Question 18. The force between two point charges kept at a distance r apart in air is F. If the same charges are kept in water at the same distance, how does the force between them change?
Solution.
The force in air Fa = (1/4πε0)(q1q2/r²)
The force in water Fw = (1/4πε0K)(q1q2/r²)
∴ Fw/Fa = 1/K
Dielectric constant of water is 81, so the force in water reduces to 1/81 times.
Teacher's Note: Medium divides the Coulomb force by its dielectric constant K; water has K = 81.
Exam Note: Force becomes F/81.
Question 19. A metallic spherical shell has an inner radius R1 and outer radius R2. A charge Q is placed at the centre of the spherical cavity. What will be surface charge density on (i) the inner surface, and (ii) the outer surface? [NCERT Exemplar]
Solution.
When a charge + Q is placed at the centre of spherical cavity, the charge induced on the inner surface = – Q and the charge induced on the outer surface = + Q.
∴ Surface charge density on the inner surface = –Q/(4πR1²)
Surface charge density on the outer surface = +Q/(4πR2²)
Teacher's Note: Induced –Q sits on the inner surface and +Q on the outer; each is divided by that sphere’s area.
Exam Note: Charge divided by 4πR² of the respective surface.
Question 20. A charge q is placed at the centre of the line joining two equal charges Q. Show that the system of three charges will be in equilibrium if q = – Q/4.
Solution.
Charge q is in equilibrium since charges A and B exert equal and opposite forces on it.
For equilibrium of charge Q at B: FBC + FAB = 0
⇒ (1/4πε0)·qQ/(l/2)² + (1/4πε0)·Q·Q/l² = 0
⇒ (1/4πε0)·(Q/l²)(4q + Q) = 0 ⇒ q = –Q/4
Teacher's Note: Centre charge feels equal opposite pulls; for end charge Q, attraction 4qQ/l² must cancel repulsion Q²/l².
Exam Note: Balance forces on an end charge; q = –Q/4.
Question 21. In the figure shown, calculate the total flux of the electrostatic field through the spheres S1 and S2. The wire AB shown here has a linear charge density λ given by λ = kx where x is distance measured along the wire, from the end A. [HOTS]
Solution.
Total charge on wire AB: QAB = ∫0l λ dx = ∫0l kx dx = k[x²/2]0l = ½kl²
By Gauss theorem, total flux through S1 = Q/ε0
Total flux through S2 = (Q + QAB)/ε0 = (Q + ½kl²)/ε0
Teacher's Note: S1 encloses only Q; S2 also encloses the whole wire, whose charge is found by integrating kx.
Exam Note: Integrate λ dx for wire charge; add Q for S2.
Question 22. Consider two hollow concentric spheres, S1 and S2, enclosing charges 2Q and 4Q respectively as shown in the figure. (i) Find out the ratio of the electric flux through them. (ii) How will the electric flux through the sphere S1 change if a medium of dielectric constant ‘εr’ is introduced in the space inside S1 in place of air? Deduce the necessary expression. [HOTS]
Solution.
Using Gauss’s Theorem, ∮E·dS = q(T)/ε0
Electric flux through sphere S1, φ1 = 2Q/ε0
Electric flux through sphere S2, φ2 = (2Q + 4Q)/ε0 = 6Q/ε0
Ratio φ1/φ2 = (2Q/ε0)/(6Q/ε0) = 1/3
If a medium of dielectric constant K (= εr) is filled in the sphere S1, electric flux through sphere, φ′1 = 2Q/(εrε0) = 2Q/(Kε0)
Teacher's Note: S2 encloses both charges (6Q) while S1 encloses 2Q; a dielectric reduces S1’s flux by K.
Exam Note: Ratio 1 : 3; flux reduces by factor εr.
Question 23. The given figure shows the electric field lines around three point charges A, B and C. (i) Which charges are positive? (ii) Which charge has the largest magnitude? Why? (iii) In which region or regions of the picture could the electric field be zero? Justify your answer. (a) near A (b) near B (c) near C (d) nowhere. [NCERT Exemplar] [HOTS]
Solution.
(i) Charges A and C are positive since lines of force emanate from them.
(ii) Charge C has the largest magnitude since maximum number of field lines are associated with it.
(iii) (a) near A.
Justification: There is no neutral point between a positive and a negative charge. A neutral point may exist between two like charges. From the figure we see that a neutral point exists between charges A and C. Also between two like charges the neutral point is closer to the charge with smaller magnitude. Thus, electric field is zero near charge A.
Teacher's Note: Lines leave positive charges and end on negative ones; a neutral point lies between like charges, nearer the weaker.
Exam Note: Positive: A, C; strongest: C; zero field near A.
Question 24. Given a uniformly charged plane/sheet of surface charge density, σ = 2 × 1017 C/m². (i) Find the electric field intensity at a point A, 5 mm away from the sheet on the left side. (ii) Given a straight line with three points X, Y and Z placed 50 cm away from the charged sheet on the right side. At which of these points, the field due to the sheet remain the same as that of point A and why? [CBSE Sample Paper 2016]
Solution.
(i) At A, E = σ/2ε0 = (2×1017 C m⁻²)/(2×8.854×10⁻¹² C²N⁻¹m⁻²)
E = 1.1×10²⁸ N/C
Directed away from the sheet.
(ii) Point Y
Because at 50 cm, the charge sheet acts as a finite sheet and thus the magnitude remains same towards the middle region of the planar sheet.
Teacher's Note: Field of a large sheet is σ/2ε0, independent of distance, but only near its middle region, hence Y.
Exam Note: E = σ/2ε0, away from sheet; point Y.
Question 25. Two isolated metal spheres A and B have radii R and 2R respectively, and same charge q. Find which of the two spheres have greater energy density just outside the surface of the spheres. [CBSE Sample Paper 2016]
Solution.
Energy density, u = ½ε0E²
But, E = σ/ε0 = q/(Aε0), where A is the surface area of the sphere.
∴ u = ½ε0·q²/(A²ε0²) ⇒ u = q²/(2ε0A²)
⇒ u ∝ 1/A² ⇒ uA > uB
(A = 4πR² for sphere A and 16πR² for sphere B, so uA = 16uB.) Sphere A has the greater energy density.
Teacher's Note: Surface field is q/(Aε0) and energy density ∝ E², so the smaller sphere has higher density.
Exam Note: Equal charge, smaller area gives larger u.
Free study material for Physics
Xam Idea Solutions for Class 12 Mathematics: Xam Idea Solutions Class 12 Physics Chapter 1 Electric Charges And Fields Short Answer Questions I
Complete Math Solutions for Xam Idea Solutions Class 12 Physics Chapter 1 Electric Charges And Fields Short Answer Questions I
Explore reliable mathematical solutions for Xam Idea Solutions Class 12 Physics Chapter 1 Electric Charges And Fields Short Answer Questions I tailored for Class 12 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.
Mastering Core Concepts with Xam Idea Solutions
Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.
Complete Your Class 12 Exam Preparation
Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.
FAQs
They are chapter-wise solved questions from the book for Class 12 Physics. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.