Download Class 12 Physics Textbook Solutions: Chapter 01 Electric Charges And Fields
Explore reliable textbook solutions for Chapter 01 Electric Charges And Fields tailored for Class 12 learners using methodologies. Utilizing these Physics answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.
Access Textbook Answers and Solutions
View or download the dedicated Chapter 01 Electric Charges And Fields solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Physics.
Long Answer Questions
Question 1. Find an expression for the electric field strength at a distant point situated (i) on the axis and (ii) along the equatorial line of an electric dipole. OR Derive an expression for the electric field intensity at a point on the equatorial line of an electric dipole of dipole moment p and length 2a. What is the direction of this field? [CBSE (AI) 2013, (F) 2015, South 2016]
Solution.
Consider an electric dipole AB. The charges –q and +q of dipole are situated at A and B respectively. The separation between the charges is 2a. Electric dipole moment, p = q·2a. The direction of dipole moment is from –q to +q.
(i) At axial or end-on position: Consider a point P on the axis of dipole at a distance r from mid-point O of electric dipole. The distance of point P from charge +q at B is BP = r – a and distance of point P from charge –q at A is AP = r + a.
Let E1 and E2 be the electric field strengths at point P due to charges +q and –q respectively. The direction of electric field due to a point charge is away from positive charge and towards the negative charge. Therefore,
E1 = (1/4πε0)·q/(r – a)² (from B to P) and E2 = (1/4πε0)·q/(r + a)² (from P to A)
Clearly the directions of E1 and E2 are along the same line but opposite to each other and E1 > E2 because positive charge is nearer. ∴ The resultant electric field due to electric dipole has magnitude equal to the difference of E1 and E2, direction from B to P i.e.,
E = E1 – E2 = (q/4πε0)[1/(r – a)² – 1/(r + a)²] = (q/4πε0)·4ra/(r² – a²)² = (1/4πε0)·2pr/(r² – a²)² … (i)
If the dipole is infinitely small and point P is far away from the dipole, then r >> a, therefore equation (i) may be expressed as E = (1/4πε0)·2pr/r⁴ = (1/4πε0)·2p/r³ … (ii)
This is the expression for the electric field strength at axial position due to a short electric dipole.
(ii) At a point of equatorial line: Consider a point P on broad side on the position of dipole formed of charges +q and –q at separation 2a. The distance of point P from mid-point O of electric dipole is r. Let E1 and E2 be the electric field strengths due to charges +q and –q of electric dipole.
From figure, AP = BP = √(r² + a²)
∴ E1 = (1/4πε0)·q/(r² + a²) along B to P (away from +q), and E2 = (1/4πε0)·q/(r² + a²) along P to A (towards –q). Clearly E1 = E2.
To find the resultant of E1 and E2, we resolve them into rectangular components. The components perpendicular to AB, E1 sin θ and E2 sin θ, being equal and opposite, cancel each other, while the components parallel to AB, E1 cos θ and E2 cos θ, being in the same direction add up and give the resultant electric field whose direction is parallel to BA.
∴ Resultant electric field at P is E = E1 cos θ + E2 cos θ = 2E1 cos θ. From the figure, cos θ = OB/PB = a/√(r² + a²)
E = 2 × (1/4πε0)·q/(r² + a²) × a/(r² + a²)1/2 = (1/4πε0)·2qa/(r² + a²)3/2 = (1/4πε0)·p/(r² + a²)3/2 … (iii)
If dipole is infinitesimal and point P is far away, a << r, so a² may be neglected as compared to r²: E = (1/4πε0)·p/r³ in the direction parallel to BA … (iv). Its direction is parallel to the axis of dipole from positive to negative charge.
It may be noted clearly from equations (ii) and (iv) that electric field strength due to a short dipole at any point is inversely proportional to the cube of its distance from the dipole and the electric field strength at axial position is twice that at broad-side on position for the same distance.
Important: The electric field due to a dipole at large distances falls off as 1/r³ and not as 1/r² as in the case of a point charge.
Teacher's Note: Axial fields subtract (nearer +q wins); equatorial components along the axis add while perpendicular ones cancel.
Exam Note: Axial 2p/4πε0r³; equatorial p/4πε0r³ opposite p.
Question 2. A charge is distributed uniformly over a ring of radius ‘a’. Obtain an expression for the electric intensity E at a point on the axis of the ring. Hence show that for point’s at large distances from the ring, it behaves like a point charge. [CBSE Delhi 2016]
Solution.
Consider a point P on the axis of uniformly charged ring at a distance x from its centre O. Point P is at distance r = √(a² + x²) from each element dl of ring. If q is total charge on ring, then charge per metre length, λ = q/2πa.
The ring may be supposed to be formed of a large number of ring elements. Consider an element of length dl situated at A. The charge on element, dq = λ dl
∴ The electric field at P due to this element: dE1 = (1/4πε0)·dq/r² = (1/4πε0)·λ dl/r², along AP (directed away from A)
The electric field strength due to opposite symmetrical element of length dl at B is dE2 = (1/4πε0)·λ dl/r², along BP (directed away from B)
If we resolve dE1 and dE2 along the axis and perpendicular to axis, we note that the components perpendicular to axis are oppositely directed and so get cancelled, while those along the axis are added up. Hence, due to symmetry of the ring, the electric field strength is directed along the axis.
The electric field strength due to charge element of length dl, situated at A, along the axis will be dE = dE1 cos θ = (1/4πε0)·(λ dl/r²) cos θ. But cos θ = x/r ∴ dE = (1/4πε0)·λx dl/r³
The resultant electric field along the axis will be obtained by adding fields due to all elements of the ring, i.e., E = ∫ (1/4πε0)·λx dl/r³ = (1/4πε0)(λx/r³)∫dl
But ∫dl = whole length of ring = 2πa and r = (a² + x²)1/2
∴ E = (1/4πε0)·λx·2πa/(a² + x²)3/2. As λ = q/2πa, we have E = (1/4πε0)·qx/(a² + x²)3/2, along the axis.
At large distances i.e., x >> a, E = (1/4πε0)·q/x², i.e., the electric field due to a point charge at a distance x. For points on the axis at distances much larger than the radius of ring, the ring behaves like a point charge.
Teacher's Note: Perpendicular components of opposite ring elements cancel, leaving only axial parts, each carrying a factor x/r.
Exam Note: Result E = qx/4πε0(a²+x²)3/2.
Question 3. State and Prove Gauss theorem in electrostatics. [CBSE Ajmer 2015]
Solution.
Statement: The net-outward normal electric flux through any closed surface of any shape is equal to 1/ε0 times the total charge contained within that surface, i.e., ∮S E·dS = (1/ε0) Σq, where ∮S indicates the surface integral over the whole of the closed surface, and Σq is the algebraic sum of all the charges (i.e., net charge in coulombs) enclosed by surface S and remains unchanged with the size and shape of the surface.
Proof: Let a point charge +q be placed at centre O of a sphere S. Then S is a Gaussian surface. Electric field at any point on S is given by E = (1/4πε0)·q/r²
The electric field and area element point radially outwards, so θ = 0°.
Flux through area dS is dφ = E·dS = E dS cos 0° = E dS
Total flux through surface S is φ = ∮S dφ = ∮S E dS = E ∮S dS = E × Area of sphere = (1/4πε0)(q/r²)·4πr²
or, φ = q/ε0, which proves Gauss’s theorem.
Teacher's Note: On a sphere E is constant and radial, so flux is E × 4πr², and r² cancels.
Exam Note: State theorem; prove using sphere around point charge.
Question 4. (i) Using Gauss Theorem show mathematically that for any point outside the shell, the field due to a uniformly charged spherical shell is same as the entire charge on the shell, is concentrated at the centre. (ii) Why do you expect the electric field inside the shell to be zero according to this theorem? OR A thin conducting spherical shell of radius R has charge Q spread uniformly over its surface. Using Gauss’s theorem, derive an expression for the electric field at a point outside the shell. Draw a graph of electric field E(r) with distance r from the centre of the shell for 0 ≤ r ≤ ∞. [CBSE Allahabad 2015, Delhi 2009, North 2016, Delhi 2011, (AI) 2013]
Solution.
(i) Electric field intensity at a point outside a uniformly charged thin spherical shell: Consider a uniformly charged thin spherical shell of radius R carrying charge Q. To find the electric field outside the shell, we consider a spherical Gaussian surface of radius r (> R), concentric with given shell. If E0 is electric field outside the shell, then by symmetry electric field strength has same magnitude E0 on the Gaussian surface and is directed radially outward. Also the directions of normal at each point is radially outward, so angle between E0 and dS is zero at each point. Hence, electric flux through Gaussian surface
φ = ∮ E0·dS = ∮ E0 dS cos 0° = E0·4πr²
Now, Gaussian surface is outside the given charged shell, so charge enclosed by Gaussian surface is Q. Hence, by Gauss’s theorem E0·4πr² = (1/ε0) × Q ⇒ E0 = (1/4πε0)·Q/r²
Thus, electric field outside a charged thin spherical shell is the same as if the whole charge Q is concentrated at the centre.
If σ is the surface charge density of the spherical shell, then Q = 4πR²σ coulomb, ∴ E0 = (1/4πε0)(4πR²σ/r²) = R²σ/(ε0r²)
(ii) Electric field inside the shell (hollow charged conducting sphere): The charge resides on the surface of a conductor. Thus a hollow charged conductor is equivalent to a charged spherical shell. To find the electric field inside the shell, we consider a spherical Gaussian surface of radius r (< R) concentric with the given shell. If Ei is the electric field inside the shell, then by symmetry electric field strength has the same magnitude Ei on the Gaussian surface and is directed radially outward. Hence, electric flux through Gaussian surface is φ = ∮ Ei·dS = Ei·4πr²
Now, Gaussian surface is inside the given charged shell, so charge enclosed by Gaussian surface is zero. Hence, by Gauss’s theorem Ei·4πr² = 0 ⇒ Ei = 0
Thus, electric field at each point inside a charged thin spherical shell is zero. The graph (right part of the figure) shows E = 0 for r < R, and E = Q/(4πε0r²) for r ≥ R, falling as 1/r² beyond the shell.
Teacher's Note: Spherical Gaussian surfaces: outside encloses Q giving Q/4πε0r²; inside encloses nothing, so the field is zero.
Exam Note: Outside: Q/4πε0r²; inside: 0; sketch the graph.
Question 5. State Gauss theorem in electrostatics. Apply this theorem to obtain the expression for the electric field at a point due to an infinitely long, thin, uniformly charged straight wire of linear charge density λ C m–1. [CBSE Delhi 2009]
Solution.
Gauss Theorem: The net electric flux through any closed surface is 1/ε0 times the net charge enclosed by it, ∮E·dS = q/ε0.
Electric field due to infinitely long, thin and uniformly charged straight wire: Consider an infinitely long line charge having linear charge density λ coulomb metre⁻¹ (linear charge density means charge per unit length). To find the electric field strength at a distance r, we consider a cylindrical Gaussian surface of radius r and length l coaxial with line charge. The cylindrical Gaussian surface may be divided into three parts: (i) Curved surface S1 (ii) Flat surface S2 and (iii) Flat surface S3.
By symmetry, the electric field has the same magnitude E at each point of curved surface S1 and is directed radially outward. The surface element vector dS1 is directed along the direction of electric field (i.e., angle between E and dS1 is zero); the elements dS2 and dS3 are directed perpendicular to field vector E (i.e., angle between E and dS2 is 90° and so also angle between E and dS3).
Electric flux through the cylindrical surface: φ = ∮E·dS = E·2πrl (curved surface) + 0 (S2) + 0 (S3)
Charge enclosed by the Gaussian surface = λl. By Gauss’s theorem, E·2πrl = λl/ε0 ∴ E = λ/(2πε0r)
Thus, the electric field strength due to a line charge is inversely proportional to r.
Teacher's Note: Radial symmetry makes E constant over the curved surface and parallel to the flat ends, which add no flux.
Exam Note: E·2πrl = λl/ε0 gives E = λ/2πε0r.
Question 6. Answer the following questions: (i) Define electric flux. Write its SI unit. (ii) Using Gauss’s law, prove that the electric field at a point due to a uniformly charged infinite plane sheet is independent of the distance from it. (iii) How is the field directed if (i) the sheet is positively charged, (ii) negatively charged? [CBSE Delhi 2012, Central 2016]
Solution.
(i) Electric flux: It is defined as the total number of electric field lines passing through an area normal to its surface. The SI unit is Nm²/C or volt-metre.
(ii) Let electric charge be uniformly distributed over the surface of a thin, non-conducting infinite sheet. Let the surface charge density (i.e., charge per unit surface area) be σ. We need to calculate the electric field strength at any point distant r from the sheet of charge.
To calculate the electric field strength near the sheet, we consider a cylindrical Gaussian surface bounded by two plane faces A and B lying on the opposite sides and parallel to the charged sheet and the cylindrical surface perpendicular to the sheet. By symmetry the electric field strength at every point on the flat surface is the same and its direction is normal outwards at the points on the two plane surfaces and parallel to the curved surface. Let a be the area of each flat face.
Total electric flux = E·a (face A) + E·a (face B) + 0 (curved surface) ∴ Total electric flux = 2Ea
As σ is charge per unit area of sheet and a is the intersecting area, the charge enclosed by Gaussian surface = σa. According to Gauss’s theorem, total electric flux = (1/ε0) (total charge enclosed by the surface), i.e., 2Ea = σa/ε0 ⇒ E = σ/2ε0
Thus electric field strength due to an infinite flat sheet of charge is independent of the distance of the point.
(iii) (i) If σ is positive, E points normally outwards/away from the sheet. (ii) If σ is negative, E points normally inwards/towards the sheet.
Teacher's Note: A cylindrical pillbox gives flux 2Ea; distance r never appears, so E = σ/2ε0 everywhere.
Exam Note: Pillbox: 2Ea = σa/ε0; away if σ positive.
Question 7. Apply Gauss’s Theorem to find the electric field near a charged conductor. OR Show that the electric field at the surface of a charged conductor is E = (σ/ε0) n̂, where σ is surface charge density and n̂ is a unit vector normal to the surface in the outward direction.
Solution.
Let a charge Q be given to a conductor; this charge under electrostatic equilibrium will redistribute and the electric field inside the conductor is zero (i.e., Ein = 0).
Let us consider a point P at which electric field strength is to be calculated, just outside the surface of the conductor. Let the surface charge density on the surface of the conductor in the neighbourhood of P be σ coulomb/metre². Now consider a small cylindrical box CD having one base C passing through P; the other base D lying inside the conductor and the curved surface being perpendicular to the surface of the conductor.
Let the area of each flat base be a. As the surface of the conductor is equipotential surface, the electric field strength E at P, just outside the surface of the conductor is perpendicular to the surface of the conductor in the neighbourhood of P.
The flux of electric field through the curved surface of the box is zero, since there is no component of electric field E normal to curved surface. Also the flux of electric field through the base D is zero, as electric field strength inside the conductor is zero. Therefore the resultant flux of electric field through the entire surface of the box is same as the flux through the face C. If S1 and S2 are flat surfaces at C and D and S3 is curved surface, then
Total electric flux = ∮E·dS1 + ∮E·dS2 + ∮E·dS3 = ∮E dS1 cos 0° + 0 + ∮E dS3 cos 90° = E a
As the charge enclosed by the cylinder is (σa) coulomb, we have, using Gauss’s theorem, Ea = (1/ε0)(σa) or E = σ/ε0 … (i)
Thus the electric field strength at any point close to the surface of a charged conductor of any shape is equal to 1/ε0 times the surface charge density σ. This is known as Coulomb’s law. The electric field strength is directed radially away from the conductor if σ is positive and towards the conductor if σ is negative.
If n̂ is unit vector normal to surface in outward direction, then E = (σ/ε0) n̂
Obviously electric field strength near a plane conductor is twice of the electric field strength near a non-conducting thin sheet of charge.
Teacher's Note: Only the outer base of the pillbox has flux, because the field inside the conductor is zero.
Exam Note: Ea = σa/ε0, so E = σ/ε0 along n̂.
Question 8. Consider a system of n charges q1, q2, ... qn with position vectors r1, r2, r3, ..., rn relative to some origin ‘O’. Deduce the expression for the net electric field E at a point P with position vector rp, due to this system of charges.
Solution.
Consider a system of N point charges q1, q2, ..., qN, having position vectors r1, r2, ..., rN with respect to origin O. We wish to determine the electric field at point P whose position vector is r.
According to Coulomb’s law, the force on a test charge q0 at P due to charge q1 is F1 = (1/4πε0)·(q1q0/r1P²) r̂1P, where r̂1P is a unit vector in the direction from q1 to P and r1P is the distance between q1 and P.
Hence the electric field at point P due to charge q1 is E1 = F1/q0 = (1/4πε0)·(q1/r1P²) r̂1P
Similarly, electric field at P due to charge q2 is E2 = (1/4πε0)·(q2/r2P²) r̂2P
According to the principle of superposition of electric fields, the electric field at any point due to a group of point charges is equal to the vector sum of the electric fields produced by each charge individually at that point, when all other charges are assumed to be absent.
Hence, the electric field at point P due to the system of N charges is
E = E1 + E2 + ... + EN = (1/4πε0)[q1r̂1P/r1P² + q2r̂2P/r2P² + ... + qNr̂NP/rNP²] = (1/4πε0) Σi=1N (qi/riP²) r̂iP
Teacher's Note: Each charge produces its own Coulomb field at P independently; superposition adds these vectors.
Exam Note: Vector sum of qir̂iP/4πε0riP².
Question 9. A uniform electric field E = Ex î N/C for x > 0 and E = –Ex î N/C for x < 0 are given. A right circular cylinder of length l cm and radius r cm has its centre at the origin and its axis along the X-axis. Find out the net outward flux. Using Gauss’s law, write the expression for the net charge within the cylinder. [HOTS]
Solution.
Electric flux through flat surface S1 (right face, normal along +x, field Ex î): φ1 = ∮E1·dS1 = ∮(Ex î)·(dS1 î) = ExS1
Electric flux through flat surface S2 (left face, normal along –x, field –Ex î): φ2 = ∮(–Ex î)·(–dS2 î) = ExS2
Electric flux through curved surface S3: φ3 = ∮E3·dS3 = E3dS3 cos 90° = 0
∴ Net electric flux, φ = φ1 + φ2 = Ex(S1 + S2). But S1 = S2 = π(r × 10⁻²)² m² = πr² × 10⁻⁴ m²
∴ φ = Ex · 2(πr² × 10⁻⁴) N m² C⁻¹
By Gauss’s law, φ = q/ε0 ⇒ q = ε0φ = ε0Ex(2πr² × 10⁻⁴) = 2πε0Exr² × 10⁻⁴ C
Numerically, q ≈ 5.56 × 10⁻¹⁵ Exr² coulomb (with Ex in N/C and r in cm).
Teacher's Note: Field leaves through both flat ends and skims the curved side; r in cm needs a 10⁻⁴ factor in area.
Exam Note: Flux 2Exπr²×10⁻⁴; q = ε0 × flux.
Question 10. Answer the following Questions. (a) Find expressions for the force and torque on an electric dipole kept in a uniform electric field. (b) Derive an expression for the work done in rotating a dipole from the angle θ0 to θ1 in a uniform electric field E. [CBSE (AI) 2014, East 2016]
Solution.
(a) Force: Consider an electric dipole of charges +q and –q at B and A, separated by 2a, placed in a uniform electric field E with p making an angle θ with E. Force on +q = +qE (along E); force on –q = –qE (opposite to E).
Net force F = qE – qE = 0. Hence the dipole does not undergo any translatory motion in a uniform field.
Torque: The two equal and opposite forces form a couple. Torque = force × perpendicular distance between the forces = qE × (2a sin θ) = (q·2a)E sin θ = pE sin θ
In vector form, τ = p × E. The torque is perpendicular to the plane containing p and E; its direction is given by the right-hand screw rule and it tends to rotate the dipole so as to align p along E.
(b) Work done in rotating a dipole: Let an electric dipole be rotated in electric field from angle θ0 to θ1 in the direction of electric field. In this process the angle of orientation θ is changing continuously; hence the torque also changes continuously. Let at any time, the angle between dipole moment p and electric field E be θ then
Torque on dipole τ = pE sin θ. The work done in rotating the dipole further by small angle dθ is dW = torque × angular displacement = pE sin θ dθ
Total work done in rotating the dipole from angle θ0 to θ1 is given by W = ∫θ0θ1 pE sin θ dθ = pE[–cos θ]θ0θ1 = –pE[cos θ1 – cos θ0] = pE(cos θ0 – cos θ1) … (i)
Special case: If electric dipole is initially in a stable equilibrium position (θ0 = 0°) and rotated through an angle θ (θ1 = θ) then work done W = pE[cos 0° – cos θ] = pE(1 – cos θ) … (ii)
Teacher's Note: Equal, opposite forces give zero net force but a couple pE sin θ; work integrates torque over angle.
Exam Note: Force 0; torque pE sin θ; W from cos difference.
Free study material for Physics
Step-by-Step Xam Idea Solutions for Class 12 Math
Access Class 12 Mathematics Solutions
Review detailed solutions for Class 12 Mathematics. The Xam Idea Solutions Class 12 Physics Chapter 1 Electric Charges And Fields Long Answer Questions PDF provides comprehensive answers mapped to standard Xam Idea Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.
Concept-Driven Math Answers
Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.
Additional Study Materials for 2026
In addition to these Xam Idea Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.
FAQs
They are chapter-wise solved questions from the book for Class 12 Physics. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.