Download Class 12 Chemistry Textbook Solutions: Chapter 08 The D–and F– Block Elements
Access comprehensive textbook solutions for Chapter 08 The D–and F– Block Elements using the reference material for Class 12 Chemistry. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.
Access Textbook Answers and Solutions
View or download the dedicated Chapter 08 The D–and F– Block Elements solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Chemistry.
Short Answer Questions II
Question 1. Assign suitable reasons for the following: (a) The Mn²⁺ compounds are more stable than Fe²⁺ towards oxidation to their +3 state. (b) Sc³⁺ is colourless in aqueous solution whereas Ti³⁺ is coloured. (c) The highest oxidation state is exhibited in oxo-anions of a metal. [CBSE (F) 2014]
Solution.
(a) The electronic configuration of Mn²⁺ is [Ar] 3d⁵ which is half filled and hence stable. So Mn²⁺ cannot lose third electron easily. On the other hand, Fe²⁺ has electronic configuration [Ar] 3d⁶. It tends to lose one electron to acquire stable [Ar] 3d⁵ electronic configuration. Hence Mn²⁺ is more stable than Fe²⁺ towards oxidation.(b) Ti³⁺ has one unpaired electron in d-orbitals (3d¹) which can absorb light in visible region for d–d transition. Hence, it is coloured in aqueous solution. Sc³⁺ has no d electron (3d⁰), therefore, no light is absorbed for d–d transition. Hence, it is colourless in aqueous solution.(c) Oxometal anions have the highest oxidation state, e.g., Cr in Cr₂O₇²⁻ has an oxidation state of +6 whereas Mn in MnO₄⁻ has an oxidation state of +7. This is again due to the combination of the metal with oxygen, which is highly electronegative and oxidising element.Teacher's Note: Mn²⁺ is stable d⁵; Ti³⁺ (d¹) absorbs visible light, Sc³⁺ (d⁰) cannot; oxygen stabilises top states.
Exam Note: Answer all three parts with configurations.
Question 2. The elements of 3d transition series are given as: Sc Ti V Cr Mn Fe Co Ni Cu Zn. Answer the following: (i) Copper has exceptionally positive E°(M²⁺/M) value. Why? (ii) Which element is a strong reducing agent in +2 oxidation state and why? (iii) Zn²⁺ salts are colourless. Why? [CBSE East 2016]
Solution.
(i) Because the sum of sublimation enthalpy and hydration enthalpy to convert Cu(s) to Cu²⁺(aq) is so high that it is not balanced by its hydration enthalpy.(ii) Cr is strongest reducing agent in +2 oxidation state. Cr²⁺ has configuration 3d⁴. After losing one electron it forms Cr³⁺ which has stable half filled t₂g level.(iii) Zn²⁺(3d¹⁰) has completely filled d-orbitals. As a result of this, d-d transition cannot occur and hence Zn²⁺ salts are colourless.Teacher's Note: Cu has high atomisation and ionisation cost; Cr²⁺ becomes stable t₂g³ Cr³⁺; Zn²⁺ is d¹⁰ with no d-d transition.
Exam Note: Link each answer to d-electron configuration.
Question 3. Why do transition elements show variable oxidation states? How is the variability in oxidation states of d-block different from that of the p-block elements? [CBSE Ajmer 2015]
Solution.
In transition elements, the energies of (n –1)d orbitals and ns orbitals are nearly same. Therefore, electrons from both can participate in bond formation and hence show variable oxidation states.
In transition elements, the oxidation states differ from each other by unity, e.g., Fe²⁺ and Fe³⁺, Cu⁺ and Cu²⁺, etc. while in p-block elements the oxidation state differ by units of two, e.g., Sn²⁺ and Sn⁴⁺, Pb²⁺ and Pb⁴⁺, etc. In transition elements the higher oxidation states are more stable for heavier elements in a group, e.g., Mo(VI) and W(VI) are more stable than Cr(VI) in group 6 whereas in p-block elements the lower oxidation states are more stable for heavier elements due to the inert pair effect, e.g., Pb(II) is more stable than Pb(IV) in group 14.
Teacher's Note: Close (n-1)d and ns energies give steps of one; p-block steps are two, favouring lower states downwards.
Exam Note: State unity steps versus steps of two.
Question 4. How would you account for the following: (a) Many of the transition elements and their compounds can act as good catalysts. (b) The metallic radii of the third (5d) series of transition elements are virtually the same as those of the corresponding members of the second series. (c) There is a greater range of oxidation states among the actinoids than among the lanthanoids. [CBSE (AI) 2009]
Solution.
(a) The catalytic activity of transition metals is attributed to the following reasons:a. Because of their variable oxidation states transition metals form unstable intermediate compounds and provide a new path with lower activation energy for the reaction.
b. In some cases, the transition metal provides a suitable large surface area with free vacancies on which reactants are adsorbed.
(b) This is due to filling of 4f-orbitals which have poor shielding effect or due to lanthanoid contraction.(c) This is due to more comparable energies of 5f, 6d and 7s orbitals in actinoids.Teacher's Note: Variable states give unstable intermediates; poorly shielding 4f electrons make 4d and 5d radii equal; 5f-6d-7s energies are close.
Exam Note: Name adsorption and intermediates for catalysis.
Question 5. (a) How would you account for the following: (i) Highest fluoride of Mn is MnF₄ whereas the highest oxide is Mn₂O₇. (ii) Transition metals and their compounds show catalytic properties. (b) Complete the following equation: 3MnO₄²⁻ + 4H⁺ → [CBSE (F) 2015]
Solution.
(a)(i) As oxygen stabilises manganese more than fluorine by forming multiple bonds.(ii) The catalytic activity of transition metals and their compounds is attributed to the following reasons:- Due to their tendency to show variable oxidation states transition metals form unstable intermediate compounds and provide a new path for the reaction with lower activation energy.
- In some cases, the transition metals provide a suitable large surface area with free valencies on which reactants are adsorbed.
3MnO₄²⁻ + 4H⁺ → 2MnO₄⁻ + MnO₂ + 2H₂O
(manganate ion → permanganate ion + manganese dioxide)
Teacher's Note: Oxygen forms multiple bonds and reaches Mn(+7); in acid, green manganate disproportionates to permanganate and MnO₂.
Exam Note: Balance the manganate disproportionation equation.
Question 6. The E°(M²⁺/M) values of some 3d metals are: Cr –0.91 V, Mn –1.18 V, Fe –0.44 V, Co –0.28 V, Ni –0.25 V, Cu +0.34 V. From the given data E° values, answer the following questions: (i) Why is E°(Cu²⁺/Cu) value exceptionally positive? (ii) Why is E°(Mn²⁺/Mn) value highly negative as compared to other elements? (iii) Which is a stronger reducing agent Cr²⁺ or Fe²⁺? Give reason. [CBSE Patna 2015] [HOTS]
Solution.
| E°(M²⁺/M) | Cr | Mn | Fe | Co | Ni | Cu |
|---|---|---|---|---|---|---|
| Value (V) | – 0.91 | – 1.18 | – 0.44 | – 0.28 | – 0.25 | + 0.34 |
Teacher's Note: Cu hydration cannot repay its atomisation cost; Mn²⁺ is half-filled d⁵; Cr²⁺ gains stable d³ on oxidation.
Exam Note: Refer to the tabulated E° values.
Question 7. Account for the following: (a) Eu²⁺ is a strong reducing agent. (b) Orange colour of dichromate ion changes to yellow in alkaline medium. (c) E°(M²⁺/M) values for transition metals show irregular variation. [CBSE (F) 2017]
Solution.
(a) This is because Eu²⁺ tends to change to Eu³⁺ as +3 is the common oxidation state of lanthanoids.(b) In alkaline medium, the orange colour of the solution changes to yellow due to conversion of dichromate (Cr₂O₇²⁻) ion to chromate (CrO₄²⁻) ion.Cr₂O₇²⁻ + 2OH⁻ → 2CrO₄²⁻ + H₂O
(orange → yellow)
Teacher's Note: Eu²⁺ readily becomes common Eu³⁺; OH⁻ turns dichromate into chromate; E° irregularity comes from ionisation and sublimation enthalpies.
Exam Note: Give the dichromate-chromate equation.
Question 8. When pyrolusite ore MnO₂ is fused with KOH in presence of air, a green coloured compound (A) is obtained which undergoes disproportionation reaction in acidic medium to give a purple coloured compound (B). (i) Write the formulae of the compounds (A) and (B). (ii) What happens when compound (B) is heated? [CBSE South 2016] [HOTS]
Solution.
(i) A = K₂MnO₄, B = KMnO₄(ii)2KMnO₄ (513 K) → K₂MnO₄ + MnO₂ + O₂
(potassium permanganate → potassium manganate)
Teacher's Note: Fusion gives green K₂MnO₄, which disproportionates to purple KMnO₄; heating KMnO₄ at 513 K releases O₂.
Exam Note: Name A and B, then give heating equation.
Question 9. Describe the trends in the following properties of the first series of the transition elements: (i) Oxidation states (ii) Atomic sizes (iii) Magnetic behaviour of dipositive gaseous ions (M²⁺).
Solution.
(i) As there is very little energy difference between 4s and 3d orbitals, electrons from both energy levels can be used for chemical bond formation. Therefore, all elements except Sc and Zn of the first transition series show a number of oxidation states.(ii) Atomic radii of the first transition series decrease from Sc to Cr, then remains almost constant till Ni and then increases from Cu to Zn. The reason of this variation in atomic radii has been attributed to the increase in nuclear charge in the beginning of the series. But as the electrons continue to be filled in d-orbitals, they screen the outer 4s electrons from the influence of nuclear charge. When the increased nuclear charge and the increased screening effect balance each other in the middle of transition series, the atomic radii become almost constant (Mn to Fe). Towards the end of the series, the repulsive interaction between electrons in orbitals become very dominant. As a result there is an expansion of the electron cloud; consequently, the atomic size increases.(iii) Except Zn²⁺, all other divalent gaseous ions of the first series of the transition elements contain unpaired electrons in their 3d-subshell and are therefore paramagnetic in nature.Teacher's Note: Radii fall to Cr, stay near constant to Ni, then rise; all M²⁺ except Zn²⁺ are paramagnetic.
Exam Note: Describe each trend with its reason.
Question 10. A solution of KMnO₄ on reduction yields either a colourless solution or a brown precipitate or a green solution depending on pH of the solution. What different stages of the reduction do these represent and how are they carried out? [NCERT Exemplar]
Solution.
Oxidising behaviour of KMnO₄ depends on pH of the solution.
In acidic medium (pH < 7),
MnO₄⁻ + 8H⁺ + 5e⁻ → Mn²⁺ + 4H₂O
(colourless)
In alkaline medium (pH > 7),
MnO₄⁻ + e⁻ → MnO₄²⁻
(green)
In neutral medium (pH = 7),
MnO₄⁻ + 2H₂O + 3e⁻ → MnO₂ + 4OH⁻
(brown precipitate)
Teacher's Note: Acid gives colourless Mn²⁺ (5e⁻), alkali gives green MnO₄²⁻ (1e⁻), neutral medium gives brown MnO₂ (3e⁻).
Exam Note: Match each medium to colour and equation.
Question 11. Lanthanum, gadolinium and lutetium are extraordinarily stable in +3 oxidation state. Explain. (Atomic number: La = 57, Gd = 64, Lu = 71)
Solution.
La (Z = 57): [Xe] 5d¹ 6s² → La³⁺: [Xe] 5d⁰ 6s⁰
Gd (Z = 64): [Xe] 4f⁷ 5d¹ 6s² → Gd³⁺: [Xe] 4f⁷ 5d⁰ 6s⁰
Lu (Z = 71): [Xe] 4f¹⁴ 5d¹ 6s² → Lu³⁺: [Xe] 4f¹⁴ 5d⁰ 6s⁰
From their electronic configurations, we find that La³⁺, Gd³⁺ and Lu³⁺ have empty, exactly half-filled and fully filled valency shells, respectively, which make them extra stable.
Teacher's Note: La³⁺ is 4f⁰, Gd³⁺ is half-filled 4f⁷ and Lu³⁺ is full 4f¹⁴, so +3 is exceptionally stable.
Exam Note: Write the three ionic configurations.
Question 12. Assign reasons for the following: (a) The second and third rows of transition elements resemble each other much more than they resemble the first row. (b) K₂[PtCl₆] is a well-known compound whereas the corresponding Ni compound is not known.
Solution.
(a) Due to lanthanoid contraction, the atomic radii of the second and third row transition elements is almost same. So they resemble each other much more as compared to first row elements.(b) The oxidation state of Pt in K₂[PtCl₆] is +4, which is a stable oxidation state for Pt. The +4 oxidation state for Ni is very difficult to achieve because the sum of the first four ionisation enthalpies is very high. Hence, the corresponding Ni (II) compound is not formed.Teacher's Note: Lanthanoid contraction equalises 4d and 5d sizes; Ni⁴⁺ is unreachable because four ionisations cost too much energy.
Exam Note: Name lanthanoid contraction and ionisation enthalpy.
Question 13. Explain the following observations: (a) The enthalpies of atomisation of transition metals are quite high. (b) There is a close similarity in physical and chemical properties of the 4d and 5d series of the transition elements, much more than expected on the basis of usual family relationship. (c) The members in the actinoid series exhibit larger number of oxidation states than the corresponding members in the lanthanoid series. [NCERT Exemplar]
Solution.
(a) This is because transition metals have strong metallic bonds as they have large number of unpaired electrons.(b) This is because 5d and 4d-series elements have virtually the same atomic and ionic radii due to lanthanide contraction. Due to equality in size of Zr and Hf, Nb and Ta, Mo and W, etc., the two elements of each pair have the same properties.(c) The members in the actinoid series exhibit larger number of oxidation states than the corresponding members in the lanthanide series due to the fact that the 5f, 6d and 7s levels are of comparable energies.Teacher's Note: Many unpaired electrons give strong metallic bonds; Zr-Hf pairs match in size; 5f, 6d, 7s energies are comparable.
Exam Note: Cite unpaired electrons, lanthanoid contraction, comparable energies.
Question 14. How would you account for the following: (a) Transition metals sometimes exhibit very low oxidation state such as +1 and 0. (b) Cr²⁺ is reducing in nature while with the same d-orbital configuration (d⁴) Mn³⁺ is an oxidising agent. (c) E° of Cu is +0.34 V while that of Zn is –0.76 V. [HOTS]
Solution.
(a) +1 oxidation state is shown by element like Cu because after loss of one electron, it acquires stable configuration of 3d¹⁰. Zero oxidation state is shown in forming metal carbonyl, because p-electrons donated by ligands are accepted into the empty d-orbitals.(b) Cr²⁺ is reducing as its configuration changes from d⁴ to d³, a more stable half-filled t₂g configuration while Mn³⁺ is oxidising as Mn³⁺ to Mn²⁺ change results in a more stable half-filled d⁵ configuration.(c) High ionisation enthalpy to transform Cu(s) to Cu²⁺(aq) is not balanced by its hydration enthalpy. However, in case of Zn after removal of electrons from 4s-orbital, stable 3d¹⁰ configuration is acquired.Teacher's Note: Cu⁺ is 3d¹⁰; carbonyls accept electrons into empty d orbitals; Cr²⁺ reaches d³, Mn³⁺ reaches d⁵.
Exam Note: Contrast Cr²⁺ and Mn³⁺ despite equal d⁴.
Question 15. For M²⁺/M and M³⁺/M²⁺ systems, E° values for some metals are as follows: Cr²⁺/Cr = – 0.9 V, Cr³⁺/Cr²⁺ = – 0.4 V; Mn²⁺/Mn = – 1.2 V, Mn³⁺/Mn²⁺ = +1.5 V; Fe²⁺/Fe = – 0.4 V, Fe³⁺/Fe²⁺ = +0.8 V. Use this data to comment upon (a) the stability of Fe³⁺ in acid solution as compared to that of Cr³⁺ and Mn³⁺. (b) the ease with which iron can be oxidised as compared to the similar process for either Cr or Mn metals. (c) What can be inferred from the magnetic moment of the complex K₄[Mn(CN)₆], magnetic moment: 2.2 BM? [CBSE Sample Paper 2016]
Solution.
(a) Higher the reduction potential of a species, greater is the ease with which it undergo reduction. Among these pairs, Mn³⁺/Mn²⁺ has largest positive reduction potential. Hence Mn³⁺ can be easily reduced to Mn²⁺ i.e., Mn³⁺ is least stable. Cr³⁺/Cr²⁺ has a negative E° value, therefore, Cr³⁺ is most stable. Fe³⁺/Fe²⁺ has a positive value but small. Hence, Fe³⁺ is more stable than Mn³⁺ but less stable than Cr³⁺.(b) Lower the reduction potential or higher the oxidation potential of a species, greater is the ease with which it undergo oxidation. Among these pairs, Mn²⁺/Mn has the most negative reduction potential or most positive oxidation potential. Therefore, it will be most easily oxidised. Thus, the decreasing order of their ease of oxidation is Mn > Cr > Fe.(c) In the complex K₄[Mn(CN)₆], Mn is in +2 oxidation state. Magnetic moment 2.2 BM indicates that it has only one unpaired electron and hence forms inner orbital or low spin octahedral complex. In presence of CN⁻, a strong ligand the hybridisation involved is d²sp³.Teacher's Note: Mn³⁺/Mn²⁺ has the highest E°, so Mn³⁺ is least stable; 2.2 BM means one unpaired electron, low-spin d²sp³.
Exam Note: Compare the three E° values before concluding.
Question 16. Account for the following: (a) Mn₂O₇ is acidic whereas MnO is basic. (b) Though copper has completely filled d-orbital (d¹⁰) yet it is considered as a transition metal. (c) Actinoids show wide range of oxidation states. [CBSE (F) 2016]
Solution.
(a) Mn has +7 oxidation state in Mn₂O₇ and +2 in MnO. In low oxidation state of the metal, some of the valence electrons of the metal atom are not involved in bonding. Hence, it can donate electrons and behave as a base. On the other hand, in higher oxidation state of the metal, valence electrons are involved in bonding and are not available. Instead effective nuclear charge is high and hence it can accept electrons and behave as an acid.(b) Copper exhibits +2 oxidation state wherein it will have incompletely filled d-orbitals (3d⁹), hence a transition metal.(c) This is due to comparable energies of 5f, 6d and 7s orbitals.Teacher's Note: Mn(+7) holds no free valence electrons and accepts them (acid); Cu²⁺ is 3d⁹; 5f, 6d, 7s are close in energy.
Exam Note: Compare Mn(+7) and Mn(+2) oxide behaviour.
Question 17. A mixed oxide of iron and chromium, FeO·Cr₂O₃ is fused with sodium carbonate in the presence of air to form a yellow coloured compound (A). On acidification the compound (A) forms an orange coloured compound (B), which is a strong oxidising agent. (i) Identify the compounds (A) and (B). (ii) Write balanced chemical equation for each step. [HOTS]
Solution.
(i) Compound A: Sodium chromate (Na₂CrO₄); Compound B: Sodium dichromate (Na₂Cr₂O₇)(ii)4FeCr₂O₄ + 8Na₂CO₃ + 7O₂ → 8Na₂CrO₄ + 2Fe₂O₃ + 8CO₂
(A: sodium chromate)
2Na₂CrO₄ + 2H⁺ → Na₂Cr₂O₇ + 2Na⁺ + H₂O
(B: sodium dichromate)
Teacher's Note: Chromite fused with soda ash in air gives yellow Na₂CrO₄; acid converts it to orange Na₂Cr₂O₇.
Exam Note: Write both steps with correct coefficients.
Question 18. When a brown compound of manganese (A) is treated with HCl it gives a gas (B). The gas taken in excess, reacts with NH₃ to give an explosive compound (C). Identify compounds A, B and C. [NCERT Exemplar] [HOTS]
Solution.
A = MnO₂, B = Cl₂, C = NCl₃
MnO₂ + 4HCl → MnCl₂ + Cl₂ + 2H₂O
(A: MnO₂; B: Cl₂)
NH₃ + 3Cl₂ (excess) → NCl₃ + 3HCl
(C: NCl₃)
Teacher's Note: Brown MnO₂ oxidises HCl to Cl₂; excess Cl₂ with ammonia forms explosive NCl₃.
Exam Note: Give both equations along with A, B, C.
Free study material for Chemistry
Xam Idea Solutions for Class 12 Mathematics: Xam Idea Solutions Class 12 Chemistry Chapter 8 The D–and F– Block Elements Short Answer Questions II
Chapter-wise Xam Idea Solutions: Xam Idea Solutions Class 12 Chemistry Chapter 8 The D–and F– Block Elements Short Answer Questions II
Access the complete chapter-wise PDF for Xam Idea Solutions Class 12 Chemistry Chapter 8 The D–and F– Block Elements Short Answer Questions II. These structured Xam Idea Solutions solutions for Class 12 Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.
Concept-Driven Math Answers
Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.
Complete Your Class 12 Exam Preparation
Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.
FAQs
They are chapter-wise solved questions from the book for Class 12 Chemistry. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.