Download Class 12 Chemistry Textbook Solutions: Chapter 07 The P Block Elements
Explore reliable textbook solutions for Chapter 07 The P Block Elements tailored for Class 12 learners using methodologies. Utilizing these Chemistry answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.
Access Textbook Answers and Solutions
Access the complete solution PDF for Class 12 Chemistry below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.
Short Answer Questions II
Question 1. Give reasons for the following: [CBSE Guwahati 2015]
NH3 has a higher boiling point than PH3.
Solution.
Due to small size and high electronegativity of N, NH3 undergoes extensive intermolecular H-bonding and hence exist as an associated molecule. In contrast due to low electronegativity of P, PH3 does not undergo H-bonding and thus exist as a discrete molecule. That is why, boiling point of NH3 is higher than PH3.
Q. H2Te is more acidic than H2S.
Ans. Bond dissociation enthalpy of H—Te bond is less than H—S bond as size of Te is larger than that of S. So, it is more acidic than H2S.
Q. Chlorine water on standing loses its yellow colour.
Ans. Cl2 + H2O → HCl + HOCl
Due to formation of hydrochloric acid and hypochlorous acid chlorine water loses yellow colour on standing.
Teacher's Note: Ammonia forms hydrogen bonds and so boils higher than phosphine.
Exam Note: Mention extensive hydrogen bonding.
Question 2. How would you account for the following: [CBSE (AI) 2010]
The electron gain enthalpy with negative sign is less for oxygen than that for sulphur.
Solution.
This is due to smaller size of oxygen the electron cloud is distributed over a small region of space, making electron density high which repels the incoming electrons.
Q. Phosphorus shows greater tendency for catenation than nitrogen.
Ans. Because P—P bond is stronger than N—N bond.
Q. Fluorine never acts as the central atom in polyatomic interhalogen compounds.
Ans. Fluorine never acts as the central atom in polyatomic interhalogen compounds since it is the most electronegative element of the group.
Teacher's Note: Oxygen is less negative in electron gain enthalpy because its small size causes repulsion with the incoming electron.
Exam Note: Compare oxygen with sulphur.
Question 3. Give reasons for the following: [CBSE Chennai 2015]
Dinitrogen is a gas but phosphorus is a solid.
Solution.
Nitrogen due to small size and high electronegativity forms pπ – pπ multiple bonds and exist as a diatomic molecule. These molecules are held together by weak Van der Waal forces and hence N2 exist as a gas at room temperature. In contrast due to larger size and lower electronegativity P does not form pπ – pπ bond with itself rather it prefer to form single P–P bonds and exist as tetrahedral P4 molecules. Due to bigger size, the force of attraction holding P4 molecules are quite strong and cannot broken by the collision of molecules at room temperature and hence solid at room temperature.
Q. Bond angle decreases from H2O to H2Te.
Ans. As we move down the group from O to Te, the size of central atom goes on increasing and its electronegativity goes on decreasing. Consequently, the bond pairs of electrons tend to lie away from the central atom as we move from H2O to Te. As a result of this the force of repulsion between the bond pairs decreases as we move from O to Te and hence the bond angle decreases in the same order.
Q. Halogens have the maximum negative electron gain enthalpy.
Ans. Halogens have one electron less than the nearest noble gas configuration. Therefore, they have a strong tendency to accept an additional electron to acquire nearest noble gas configuration and hence they have maximum negative electron gain enthalpy.
Teacher's Note: Nitrogen exists as a diatomic gas with weak forces, while phosphorus forms larger solid molecules.
Exam Note: Contrast N2 and P4.
Question 4. Account for the following: [CBSE (F) 2014]
The molecules NH3 and NF3 have dipole moments which are of opposite directions.
Solution.
This is because in NH3 nitrogen is more electronegative than hydrogen while in NF3, nitrogen is less electronegative than fluorine.
Q. Bi is a strong oxidising agent in the +5 state.
Ans. Due to inert pair effect Bi in +3 state is much more stable than in +5 state. Therefore, Bi in +5 state accepts two electrons and get reduced to more stable +3 state. Hence Bi is strong oxidising agent in +5 state.
Q. PCl5 is known but NCl5 is not known.
Ans. Nitrogen with n = 2, has s and p orbitals only. It does not have d orbitals to expand its covalency beyond four. Hence, NCl5 is not known. PCl5 is known as P has vacant 3d orbital to which 3s electrons can be excited to make available five half filled orbitals needed for the formation of five P—Cl bonds.
Teacher's Note: The N-H dipole points one way and the N-F dipole the opposite way, because the electronegativity order differs.
Exam Note: Compare dipoles in NH3 and NF3.
Question 5. Explain the following observations: [CBSE (AI) 2012]
H2S is more acidic than H2O.
Solution.
Due to smaller size of O as compared to S, the bond dissociation enthalpy of O–H bond is higher than that of S–H bond. As a result, in aqueous solution, S–H bond can break more easily to form H+ ion than O–H bond. Hence, H2S is more acidic than H2SO.
Q. Fluorine does not exhibit any positive oxidation state.
Ans. This is because fluorine is the most electronegative element and it does not have d orbitals.
Q. Helium forms no real chemical compound.
Ans. This is because the valence shell orbital of helium is completely filled (1s2) and it has high ionisation enthalpy and more positive electron gain enthalpy.
Teacher's Note: Sulphur's S-H bond is weaker, so H2S releases H+ more easily than H2O.
Exam Note: Compare bond dissociation enthalpies.
Question 6. Give reasons: [CBSE Delhi 2017]
Thermal stability decreases from H2O to H2Te.
Solution.
As the size of the element E increases down the group E–H bond dissociation enthalpy decreases therefore thermal stability decreases from H2O to H2Te.
Q. Fluoride ion has higher hydration enthalpy than chloride ion.
Ans. This is due to small size and high charge of fluoride ion, i.e., high charge density of fluoride ion.
Q. Nitrogen does not form pentahalide.
Ans. Nitrogen has only four (one s and three p) orbitals in its valence shell. It does not have d orbitals to expand its covalency beyond four. That is why it does not form pentahalides.
Teacher's Note: Larger central atoms form weaker E-H bonds, so hydride stability falls from H2O to H2Te.
Exam Note: Link atom size to bond strength.
Question 7. Give reasons for the following: [CBSE (AI) 2017]
Red phosphorus is less reactive than white phosphorus.
Solution.
Red phosphorus is less reactive than white phosphorus as the white phosphorus molecule possess angular strain in P4 molecule where the bond angles are only 60°.
Q. Electron gain enthalpies of halogens are largely negative.
Ans. Halogens have one electron less than the nearest noble gas. Therefore, they readily accept one electron to attain nearest noble gas configuration and hence they have large negative values of electron gain enthalpies.
Q. N2O5 is more acidic than N2O3.
Ans. In N2O5, N is in +5 oxidation state whereas in N2O3 it is in +3 oxidation state. Higher the +ve oxidation state of the atom, more will be its acidic character.
Teacher's Note: Red phosphorus is less reactive because white phosphorus has strained P4 molecules with 60 degree angles.
Exam Note: Mention polymeric red phosphorus.
Question 8. Give reasons for the following:
ICl is more reactive than I2.
Solution.
ICl is more reactive than I2 because I—Cl bond is weaker than I—I bond. Consequently, ICl breaks easily to form halogen atoms which readily bring about the reactions.
Q. Helium is used in diving apparatus.
Ans. Helium is used as a diluent for oxygen in modern diving apparatus because of its very low solubility in blood.
Q. H2O is a liquid and H2S is a gas.
Ans. Due to small size and high electronegativity of oxygen, molecules of water are associated through hydrogen bonding, resulting in its liquid state. On the other hand, H2S molecules are not associated through H-bonding. Hence, it is a gas.
Teacher's Note: ICl is more reactive than iodine because its I-Cl bond is weaker.
Exam Note: Compare bond strengths.
Question 9. Account for the following
Chlorine water has both oxidising and bleaching properties.
Solution.
Chlorine water produces nascent oxygen which is responsible for bleaching action and oxidation.
Cl2 + H2O → 2HCl + [O]
Q. H3PO2 and H3PO3 act as good reducing agents while H3PO4 does not.
Ans. Both H3PO2 and H3PO3 have P—H bonds, so they act as reducing agents. H3PO4, has no P—H bond but has O—H bonds, so it cannot act as a reducing agent.
Q. On addition of ozone gas to KI solution, violet vapours are obtained
Ans. Ozone gas acts as a strong oxidising agent, so it oxidises iodide ions to iodine.
2I–(aq) + H2O(l) + O3(g) → 2OH– (aq) + I2(g) + O2(g)
I2 vapours evolved have violet colour.
Teacher's Note: Chlorine water produces nascent oxygen, which oxidises and bleaches.
Exam Note: Write the equation with nascent oxygen.
Question 10. Account for the following:
Both NO and ClO2 are odd electron species but NO dimerises while ClO2 does not.
Solution.
In NO, the odd electron on N is attracted by only one O-atom but in ClO2, the odd electron on Cl is attracted by two O-atoms. Thus, the odd electron on N in NO is localised while the odd electron on Cl in ClO2 is delocalised. Consequently, NO has a tendency to dimerise but ClO2 does not.
Q. Bleaching of flowers by chlorine is permanent while that by sulphur dioxide is temporary.
Ans. Cl2 bleaches coloured material by oxidation.
Cl2 + H2O → 2HCl + O
Coloured material + [O] → Colourless
Hence, bleaching is permanent.
In contrast, SO2 bleaches coloured material by reduction and hence bleaching is temporary since when the bleached colourless material is exposed to air, it gets oxidised and the colour is restored.
SO2 + 2H2O → H2SO4 + 2H aerial Colourless material Coloured material + H → Colourless material → oxidation
Q. Sulphur exhibits greater tendency for catenation than selenium.
Ans. As we move from S to Se, the atomic size increases and hence the strength of E—E bond decreases. Thus, S—S bond is much stronger than Se—Se bond. Consequently, S shows greater tendency for catenation than selenium.
Teacher's Note: NO has a localised odd electron and so dimerises, whereas ClO2's electron is delocalised.
Exam Note: Contrast localised and delocalised electrons.
Question 11. Give reasons for the following:
Noble gases are mostly inert.
Solution.
Noble gases are mostly inert because of the following reasons:
a. They have completely filled ns2np6 electronic configurations in their valence shells.
b. Electron gain enthalpies of noble gases are positive.
c. They have high ionisation enthalpies.
Q. Noble gases form compounds with fluorine and oxygen only.
Ans. Fluorine and oxygen are the most electronegative elements and hence are very reactive. So, they form compounds with noble gases, particularly xenon.
Q. Neon is generally used for warning signals.
Ans. Neon lights are visible from long distances even in fog and mist and hence neon is generally used for warning signals.
Teacher's Note: Noble gases are inert owing to filled valence shells and very high ionisation enthalpies.
Exam Note: Mention ns2 np6 configurations.
Question 12. On reaction with Cl2, phosphorus forms two types of halides ‘A’ and ‘B’. Halide A is yellowish-white powder but halide ‘B’ is colourless oily liquid. Identify A and B and write the formulas of their hydrolysis products. [NCERT Exemplar]
Solution.
A = PCl5 (Yellowish white powder)
P4 + 10Cl2 → 4PCl5 B = PCl3 (Colourless oily liquid)
P4 + 6Cl2 → 4PCl3
Hydrolysis products are formed as follows:
PCl3 + 3H2O → H3PO3 + 3HCl
PCl5 + 4H2O → H3PO4 + 5HCl
Teacher's Note: Chlorine gives PCl5 and PCl3, whose hydrolysis forms phosphoric and phosphorous acids.
Exam Note: Write equations for both halides.
Question 13. Complete the following chemical equations: [CBSE (F) 2011]
(a) P4 + SO2Cl2 →
(b) Fe3+ + SO2 + H2O →
(c) XeF6 + H2O (excess) →
Solution.
(a) P4 + 10SO2Cl2 → 4PCl5 + 10SO2
(b) 2Fe3+ + SO2 + 2H2O → 2Fe2+ + 4H+ + SO42−
(c) XeF6 + 3H2O (excess) → XeO3 + 6HF
Teacher's Note: Sulphuryl chloride chlorinates phosphorus fully to PCl5; excess water removes all fluorine from XeF6.
Exam Note: Balance charge in the Fe equation.
Question 14. Complete the following equations: [CBSE (F) 2013]
(a) PCl3 + H2O →
(b) XeF2 + PF5 →
(c) NaN3 →(heat)
Solution.
(a) PCl3 + 3H2O → H3PO3 + 3HCl
(b) XeF2 + PF5 → [XeF]+ [PF6]−
(c) 2NaN3 →(heat) 2Na + 3N2
Teacher's Note: PF5 takes fluoride from XeF2 to form an ionic salt; sodium azide decomposes to give nitrogen gas.
Exam Note: Write PF6− as the anion.
Question 15. Answer the following question: [CBSE Delhi 2014]
(a) Draw the structures of the following molecules: (i) XeOF4 (ii) H2SO4
(b) Write the structural difference between white phosphorus and red phosphorus.
Solution.
(a) (i) XeOF4
(ii) H2SO4
(b) White phosphorus consists of discrete tetrahedral P4 molecule with six P—P covalent bonds. Red phosphorus has polymeric structure in which P4 tetrahedra are linked together through P—P covalent bond to form chain.
Teacher's Note: H2SO4 is tetrahedral about sulphur; white phosphorus is discrete P4 while red phosphorus is a polymeric chain.
Exam Note: Mention six P–P bonds in P4.
Question 16. Account for the following: [CBSE (F) 2015]
(a) Bond angle in NH4+ is higher than NH3.
(b) H2S has a lower boiling point than H2O.
(c) Reducing character decreases from SO2 to TeO2.
Solution.
(a) N atom both in NH3 and NH4+ is sp3 hybridised. In NH4+ all the four orbitals are bonded whereas in NH3 there is a lone pair on N, which is responsible for lone pair–bond pair repulsion in NH3 reducing the bond angle from 109°28′ to 107°.
(b) Due to high electronegativity and small size of oxygen, H2O undergoes extensive intermolecular H-bonding and exists as an associated molecule. On the other hand, due to low electronegativity of S, H2S is unable to form effective H-bonds and exists as a discrete molecule held by weak van der Waals forces. To overcome these forces only a small amount of energy is required. Therefore H2S has lower boiling point than H2O.
(c) Because the stability of +4 oxidation state increases from S to Te on moving down the group in group 16 due to inert pair effect.
Teacher's Note: Lone pair–bond pair repulsion squeezes NH3 to 107°, while NH4+ keeps the ideal tetrahedral angle.
Exam Note: Quote 109°28′ and 107°.
Question 17. Illustrate how copper and zinc give different products on reaction with HNO3. [HOTS]
Solution.
With conc. HNO3:
Cu + 4HNO3 → Cu(NO3)2 + 2H2O + 2NO2
Zn + 4HNO3 → Zn(NO3)2 + 2H2O + 2NO2
With dil. HNO3:
3Cu + 8HNO3 → 3Cu(NO3)2 + 4H2O + 2NO
Zn + 2HNO3 → Zn(NO3)2 + 2H (×4); HNO3 + 8H → 3H2O + NH3; NH3 + HNO3 → NH4NO3; NH4NO3 → N2O + 2H2O
Net: 4Zn + 10HNO3 → 4Zn(NO3)2 + 5H2O + N2O
Teacher's Note: Copper gives NO2 with concentrated acid and NO with dilute; zinc gives NO2 and N2O respectively.
Exam Note: Give net balanced equations for all four.
Question 18. Draw the structures of the following:
(a) H2S2O8
(b) XeO3
(c) HOClO2
Solution.
(a) H2S2O8 (peroxodisulphuric acid)
(b) XeO3 (pyramidal)
(c) HOClO2 (chloric acid)
Teacher's Note: The peroxo O–O bond links the two sulphur atoms; XeO3 is pyramidal; chloric acid has Cl(=O)2OH.
Exam Note: Show the lone pair on xenon.
Question 19. Answer the following question: [CBSE Sample Paper 2016]
(a) Write balanced chemical equations for the following: (i) Complete hydrolysis of XeF6. (ii) Disproportionation reaction of orthophosphorus acid.
(b) Draw the structure of a noble gas species which is isostructural with BrO3−.
Solution.
(a) (i) XeF6 + 3H2O → XeO3 + 6HF; (ii) 4H3PO3 →(heat) 3H3PO4 + PH3
(b) XeO3 is isostructural with BrO3−.
Teacher's Note: BrO3− and XeO3 both have 26 valence electrons and a pyramidal shape with one lone pair.
Exam Note: Name the shape and lone pair.
Question 20. Answer the following question:
(a) Complete the following chemical equations. (i) NH4Cl(aq) + NaNO2(aq) → (ii) P4 + 3NaOH + 3H2O →
(b) Why is Ka2 << Ka1 for H2SO4 in water?
Solution.
(a) (i) NH4Cl(aq) + NaNO2(aq) → N2(g) + 2H2O(l) + NaCl(aq); (ii) P4 + 3NaOH + 3H2O → PH3 (phosphine) + 3NaH2PO2
(b) Ka2 << Ka1 because HSO4− ion has much less tendency to donate a proton to H2O as compared to H2SO4.
Teacher's Note: Ammonium nitrite formed in situ decomposes to nitrogen; the negatively charged HSO4− holds its proton more tightly.
Exam Note: State HSO4− as the weaker donor.
Question 21. Explain the following observations giving appropriate reasons:
(a) Ozone is thermodynamically unstable with respect to oxygen.
(b) The HEH bond angle of the hydrides of group 15 elements decreases as we move down the group.
(c) Bleaching effect of chlorine is permanent.
Solution.
(a) 2O3(g) → 3O2(g). Ozone is thermodynamically unstable with respect to oxygen as its decomposition into oxygen results in the liberation of heat (ΔH = −ve) and increase in entropy (ΔS = +ve). These two factors reinforce each other, resulting in large −ve ΔG (= ΔH − TΔS) for its conversion into oxygen.
(b) As we move from NH3 to BiH3, the size of the central atom goes on increasing and its electronegativity goes on decreasing. Due to this, the bond pair of electrons tend to lie away from the central atom. As a result, the repulsion between the pairs decreases as we move from NH3 to BiH3. Consequently the bond angle decreases as we go down the group from NH3 to BiH3.
(c) Cl2 + H2O → [HCl + HOCl] → 2HCl + [O]. Coloured substance + [O] → Colourless substance. As the bleaching action of chlorine is due to oxidation, therefore, it is permanent.
Teacher's Note: Both ΔH and ΔS favour ozone decomposition, making ΔG large and negative; chlorine bleaches by permanent oxidation.
Exam Note: Write ΔG = ΔH − TΔS.
Question 22. Give reasons for the following:
(a) Nitric oxide becomes brown when released in air.
(b) Solid phosphorus pentachloride exhibits some ionic character.
(c) Ammonia acts as a ligand.
Solution.
(a) Nitric oxide readily combines with O2 of air to form nitrogen dioxide which is brown in colour. 2NO + O2 → 2NO2
(b) Solid PCl5 exists as [PCl4]+ [PCl6]− and hence exhibits some ionic character.
(c) Due to the presence of lone pair of electrons on N, NH3 acts as a ligand.
Teacher's Note: Colourless NO is oxidised by air to brown NO2; solid PCl5 is really [PCl4]+[PCl6]−.
Exam Note: Give the NO oxidation equation.
Question 23. Assign appropriate reasons for each of the following statements:
(a) Metal fluorides are more ionic in nature than metal chlorides.
(b) Addition of Cl2 to KI solution gives it a brown colour but excess of Cl2 turns it colourless.
(c) Perchloric acid is a stronger acid than sulphuric acid.
Solution.
(a) According to Fajans' rule, a bigger anion is more easily polarised than a smaller anion. As a result, the same metal cation can polarise a bigger Cl− ion more easily than the smaller F− ion. In other words, for the same metal, the metal fluoride is more ionic than metal chloride. So, in general, metal fluorides are more ionic than metal chlorides.
(b) Cl2 being a stronger oxidising agent than I2 first oxidises KI to give I2 which imparts brown colour to the solution: 2KI + Cl2 → 2KCl + I2. If Cl2 is passed in excess, the I2 thus formed gets further oxidised to iodic acid (HIO3) which is colourless: I2 + 5Cl2 + 6H2O → 2HIO3 + 10HCl.
(c) The oxidation state of Cl in perchloric acid is +7 while that of S in sulphuric acid is +6. Greater the oxidation state of central atom, more readily the O–H bond breaks and hence stronger is the acid.
Teacher's Note: Fajans' rule: the larger chloride ion is polarised more easily; excess Cl2 oxidises I2 further to colourless HIO3.
Exam Note: Cite Fajans' rule for part (a).
Question 24. A colourless inorganic salt A decomposes at about 250°C to give only two products B and C leaving no residue. The oxide C is a liquid at room temperature and is neutral to litmus paper while B is neutral oxide. White phosphorus burns in excess of B to produce strong dehydrating agent. Give balanced equations for above processes. [HOTS]
Solution.
A = NH4NO3 (ammonium nitrate), B = N2O (nitrous oxide), C = H2O.
Reactions involved:
NH4NO3 →(250°C) N2O + 2H2O
10N2O + P4 → 10N2 + P4O10 (phosphorus pentoxide, a dehydrating agent)
Teacher's Note: Ammonium nitrate gives N2O and water; N2O oxidises P4 to P4O10, a strong dehydrating agent.
Exam Note: Identify A, B, C before writing equations.
Free study material for Chemistry
Xam Idea Solutions for Class 12 Mathematics: Xam Idea Solutions Class 12 Chemistry Chapter 7 The P Block Elements Short Answer Questions II
Complete Math Solutions for Xam Idea Solutions Class 12 Chemistry Chapter 7 The P Block Elements Short Answer Questions II
Review detailed solutions for Class 12 Mathematics. The Xam Idea Solutions Class 12 Chemistry Chapter 7 The P Block Elements Short Answer Questions II PDF provides comprehensive answers mapped to standard Xam Idea Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.
Detailed Calculation Guides for Class 12
Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.
Explore More Study Resources for Class 12 Math
In addition to these Xam Idea Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.
FAQs
They are chapter-wise solved questions from the book for Class 12 Chemistry. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.