Xam Idea Solutions Class 12 Chemistry Chapter 7 The P Block Elements Long Answer Questions

Official Textbook Solutions: Class 12 Chemistry Chapter 07 The P Block Elements

Access comprehensive textbook solutions for Chapter 07 The P Block Elements using the reference material for Class 12 Chemistry. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.

Chapter-wise Solutions for Chemistry: Chapter 07 The P Block Elements

Navigate directly to the solved Chemistry textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.

Long Answer Questions

Question 1. Answer the following question :

Complete the following chemical reaction equations: a. P4 + SOCl2 → b. XeF4 + H2O →

Solution.

(a) P4 + 8SOCl2 → 4PCl3 + 4SO2 + 2S2Cl2

(b) 6XeF4 + 12H2O → 4Xe + 2XeO3 + 24HF + 3O2

Q. Explain the following observations giving appropriate reasons:

a. The stability of +5 oxidation state decreases down the group in Group 15 of the periodic table.

b. Solid phosphorus pentachloride behaves as an ionic compound.

c. Halogens are strong oxidising agents.

[CBSE Delhi 2010]

Ans. (a) The stability of +5 oxidation state decreases down the group in Group 15 of the periodic table. The +3 oxidation state becomes more and more common on moving down the group from N to Bi. This is because of inert pair effect.

(b) Solid PCl5 behaves as an ionic compound because it is a salt containing the tetrahedral cation [PCl4]+and octahedral anion [PCl6]–.

(c) Halogens are strong oxidising agents because they have high electron affinities, so, they pick up electrons from other substances.

Teacher's Note: These phosphorus and xenon reactions give PCl3 and S2Cl2 from SOCl2 and Xe, XeO3 and HF from XeF4.

Exam Note: Balance each equation carefully.

Question 2. Answer the following question :

Which allotrope of phosphorus is more reactive and why?

Solution.

White or yellow phosphorus is more reactive than the other allotropes because it is less stable due to angular strain in the P4 molecule of white phosphorus where the angles are only 60°.

Q. How the supersonic jet aeroplanes are responsible for the depletion of ozone layers?

Ans. Nitrogen oxides (particularly nitric oxide) emitted from the exhaust system of supersonic jet aeroplanes are responsible for depletion of ozone layer.

NO(g) + O3(g) → NO2(g) + O2(g)

Q. F2 has lower bond dissociation enthalpy than Cl2. Why?

Ans. Bond dissociation enthalpy of F2 is lower than Cl2 due to small size of fluorine and relatively larger electron-electron repulsion among the lone pairs in F2 molecule where they are much closer to each other than in case of Cl2.

Q. Which noble gas is used in filling balloons for meteorological observations?

Ans. Helium, as it is non-inflammable and light gas.

Q. Complete the equation: XeF2 + PF5 →

[CBSE Delhi 2015]

Ans. XeF2 + PF5 → [XeF]+ [PF6]–

Teacher's Note: White phosphorus is more reactive because its P4 molecule has strained 60 degree bond angles.

Exam Note: Mention angular strain.

Question 3. Answer the following question :

Complete the following chemical reaction equations: a. AgCl(s) + NH3(aq) → b. P4(s) + NaOH(aq) + H2O(l) →

Solution.

(a) AgCl + 2NH3 → [Ag (NH3)2]+ Cl–

(b) P4 + 3NaOH + 3H2O → PH3 + 3NaH2PO2

Q. Explain the following observations:

a. H2S is less acidic than H2Te.

b. Fluorine is a stronger oxidising agent than chlorine.

c. Noble gases are the least reactive elements.

[CBSE (F) 2010]

Ans. (a) This is because bond dissociation enthalpy of H—Te bond is less than H—S as the size of Te is larger than S.

(b) Fluorine is a stronger oxidising agent than chlorine due to low dissociation enthalpy of F—F bond and high hydration enthalpy of F– ions.

(c) Noble gases are the least reactive elements due to fully filled outermost shells, high ionisation enthalpy and positive electron gain enthalpy.

Teacher's Note: These equations give a silver complex from AgCl and ammonia, and PH3 with a hypophosphite from P4.

Exam Note: Name the complex and the products.

Question 4. Answer the following question: [CBSE (F) 2017]

(a) Account for the following: (i) BiH3 is the strongest reducing agent in Group 15 elements hydrides. (ii) Cl2 acts as a bleaching agent. (iii) Noble gases have very low boiling points.

(b) Draw the structures of the following: (i) H4P2O7 (ii) XeOF4

Solution.

(a) (i) On moving down the group atomic size increases, therefore, E–H bond strength decreases. Thus, Bi–H bond is the weakest amongst the hydrides of group 15 and hence BiH3 is the strongest reducing agent. (ii) In the presence of moisture or in aqueous solution, Cl2 liberates nascent oxygen: Cl2 + H2O → 2HCl + [O]. The bleaching action of Cl2 is due to oxidation which is permanent. Coloured substance + [O] → Colourless substance. (iii) Noble gases being monoatomic have no interatomic forces except weak dispersion forces and therefore they have very low boiling points.

(b) (i) H4P2O7 (pyrophosphoric acid)

PPOOHOHOOOHOHH₄P₂O₇ (pyrophosphoric acid)

(ii) XeOF4 (square pyramidal)

XeOFFFFXeOF₄: square pyramidal (sp³d²)

Teacher's Note: Bi–H is the weakest E–H bond in group 15, so BiH3 donates hydrogen most readily.

Exam Note: Link bond strength to reducing power.

Question 5. Answer the following question: [CBSE (F) 2017]

(a) Although nitrogen and chlorine have nearly same electronegativity yet nitrogen forms hydrogen bonding while chlorine does not. Why?

(b) What happens when F2 reacts with water?

(c) Write the name of the gas evolved when Ca3P2 is dissolved in water.

(d) Write the formula of a noble gas species which is isostructural with IBr2−.

(e) Complete the equation: [Fe(H2O)6]2+ + NO →

Solution.

(a) Atomic size of nitrogen is smaller than chlorine. Due to this electron density per unit volume on nitrogen atom is higher than that of chlorine atom. Therefore, nitrogen forms hydrogen bonds while chlorine does not although nitrogen and chlorine have nearly same electronegativity.

(b) It oxidises H2O to O2. 2F2(g) + 2H2O(l) → 4H+(aq) + 4F−(aq) + O2(g)

(c) Phosphine (PH3). Ca3P2 + 6H2O → 3Ca(OH)2 + 2PH3

(d) XeF2. IBr2− has 2 bond pairs and 3 lone pairs, therefore, it should be linear. Like IBr2−, XeF2 has 2 bond pairs and 3 lone pairs, therefore, it is also linear.

(e) [Fe(H2O)6]2+ + NO → [Fe(H2O)5NO]2+ + H2O (brown ring)

Teacher's Note: Nitrogen's small atom gives high electron density, enabling hydrogen bonds despite electronegativity equal to chlorine's.

Exam Note: Mention size and electron density.

Question 6. Answer the following question:

(a) Give reasons for the following: (i) Bond enthalpy of F2 is lower than that of Cl2. (ii) PH3 has lower boiling point than NH3.

(b) Draw the structures of the following molecules: (i) BrF3 (ii) (HPO3)3 (iii) XeF4 [CBSE Delhi 2013]

Solution.

(a) (i) Bond dissociation enthalpy decreases as the bond distance increases from F2 to I2 because of the corresponding increase in the size of the atom as we move from F to I. The F—F bond dissociation enthalpy is, however, smaller than that of Cl—Cl and even smaller than that of Br—Br. This is because F atom is very small and hence the three lone pairs of electrons on each F atom repel the bond pair holding the F-atoms in the molecule, resulting in lower bond enthalpy than Cl2. (ii) Unlike NH3, PH3 molecules are not associated through hydrogen bonding in liquid state. That is why the boiling point of PH3 is lower than NH3.

(b) (i) BrF3 (slightly bent T-shape)

BrFFFBrF₃: slightly bent T-shape

(ii) (HPO3)3

POPOPOOOHOOHOOH(HPO₃)₃: cyclic trimetaphosphoric acid

(iii) XeF4 (square planar)

XeFFFFXeF₄: square planar

Teacher's Note: Lone-pair repulsion between tiny fluorine atoms weakens the F–F bond below Cl–Cl.

Exam Note: Name each shape under its drawing.

Question 7. Answer the following question:

(a) Account for the following: (i) Acidic character increases from HF to HI. (ii) There is large difference between the melting and boiling points of oxygen and sulphur. (iii) Nitrogen does not form pentahalide.

(b) Draw the structures of the following: (i) ClF3 (ii) XeF4 [CBSE Delhi 2015]

Solution.

(a) (i) As the size of halogen atom increases from F to I, the bond dissociation enthalpy of H—X bond decreases from H—F to H—I. Due to this acidic character increases from HF to HI. (ii) Because of small size and high electronegativity oxygen forms pπ-pπ multiple bonds and exists as a diatomic O2 molecule. These molecules are held together by weak van der Waals forces. Sulphur on the other hand due to its higher tendency for catenation and lower tendency for pπ-pπ multiple bond formation, forms octa-atomic S8 molecule. Because of bigger size of S8 molecule than O2 molecule the force of attraction holding the S8 molecules together are much stronger than O2 molecules. Hence, there is large difference between the melting and boiling points of oxygen and sulphur. (iii) Nitrogen with n = 2, has s and p-orbitals only. It does not have d-orbitals to expand its covalency beyond four. Due to this it does not form pentahalide.

(b) (i) ClF3 (slightly bent T-shape)

ClFFFClF₃: slightly bent T-shape

(ii) XeF4 (square planar)

XeFFFFXeF₄: square planar

Teacher's Note: H–I breaks most easily, so HI is the strongest acid; oxygen's small size gives gaseous O2.

Exam Note: Order H–F to H–I bond enthalpies.

Question 8. Answer the following question:

(a) Draw the structures of the following: (i) H2S2O7 (ii) HClO3

(b) Give an explanation for each of the following observations: (i) In the structure of HNO3, the N—O bond (121 pm) is shorter than the N—OH bond (140 pm). (ii) All the P—Cl bonds in PCl5 are not equivalent. (iii) ICl is more reactive than I2.

Solution.

(a) (i) H2S2O7 (pyrosulphuric acid, oleum)

SSOOOOHOOHOH₂S₂O₇ (pyrosulphuric acid)

(ii) HClO3 (chloric acid)

ClOHOOHClO₃ (chloric acid)

(b) (i) Due to resonance, N—O bond length is the average of single and double bond whereas N—OH bond is purely single bond. (ii) PCl5 has trigonal bipyramidal structure in which the three equatorial P—Cl bonds are equivalent, while the two axial bonds are longer than equatorial bonds. This is due to the fact that axial bond pairs suffer more repulsion as compared to equatorial bond pairs. (iii) This is because I—Cl bond has lower bond dissociation enthalpy than I—I bond.

Teacher's Note: Resonance shortens the N=O bond in HNO3; axial P–Cl bonds in PCl5 are longer due to repulsion.

Exam Note: Distinguish axial and equatorial bonds.

Question 9. Answer the following question: [CBSE (F) 2009]

(a) Complete the following reaction equations: (i) XeF2 + PF5 → (ii) Cl2(g) + NaOH(aq, hot and conc.) →

(b) Explain the following observations: (i) +3 oxidation state becomes more and more stable from As to Bi in the group. (ii) Sulphur in vapour state exhibits paramagnetism. (iii) Fluorine does not exhibit any positive oxidation state.

Solution.

(a) (i) XeF2 + PF5 → [XeF]+ [PF6]−; (ii) 3Cl2(g) + 6NaOH(aq, hot and conc.) → 5NaCl + NaClO3 + 3H2O

(b) (i) This is due to inert pair effect. (ii) In vapour state sulphur partly exists as S2 molecule having two unpaired electrons in the antibonding π* orbitals like O2 and, hence exhibits paramagnetism. (iii) This is because fluorine is the most electronegative element and does not have d-orbitals in its valence shell.

Teacher's Note: Hot concentrated alkali converts chlorine to chloride and chlorate; sulphur vapour contains paramagnetic S2 like O2.

Exam Note: Balance NaOH with coefficient six.

Question 10. Answer the following question: [CBSE (F) 2009]

(a) Complete the following reaction equations: (i) PCl5 + H2O (excess) → (ii) F2 + H2O →

(b) Explain the following observations: (i) No distinct chemical compound of helium is known. (ii) Phosphorus has a greater tendency for catenation than nitrogen. (iii) In solutions of H2SO4 in water, the second dissociation constant Ka2 is less than the first dissociation constant Ka1.

Solution.

(a) (i) PCl5 + 4H2O (excess) → H3PO4 + 5HCl; (ii) 2F2(g) + 2H2O(l) → 4H+(aq) + 4F−(aq) + O2(g)

(b) (i) This is due to small size, high ionisation enthalpy and stable electronic configuration of helium. (ii) This is because P–P single bond is stronger than N–N single bond. (iii) Ka2 << Ka1 because HSO4− ion has much less tendency to donate a proton to H2O as compared to neutral H2SO4.

Teacher's Note: Excess water hydrolyses PCl5 completely to H3PO4; fluorine oxidises water to oxygen.

Exam Note: Write both complete equations.

Question 11. Answer the following question:

(a) What happens when (i) chlorine gas is passed through a hot concentrated solution of NaOH? (ii) sulphur dioxide gas is passed through an aqueous solution of a Fe(III) salt?

(b) Answer the following: (i) What is the basicity of H3PO3 and why? (ii) Why does fluorine not play the role of a central atom in interhalogen compounds? (iii) Why do noble gases have very low boiling points? [CBSE (AI) 2011]

Solution.

(a) (i) 3Cl2 + 6NaOH (hot and conc.) → 5NaCl + NaClO3 + 3H2O; (ii) 2Fe3+ + SO2 + 2H2O → 2Fe2+ + SO42− + 4H+

(b) (i) Two, as the structure of H3PO3 has two P—OH bonds.

POHOHHOH₃PO₃ (two P–OH groups, one P–H)

(ii) This is due to smaller size and absence of d orbitals in the valence shell of fluorine.

(iii) Noble gases being monoatomic gases have no interatomic forces except weak dispersion forces, therefore they have low boiling points.

Teacher's Note: H3PO3 has two P–OH groups and one P–H, so it is dibasic, not tribasic.

Exam Note: State basicity as two, with reason.

Question 12. Answer the following question:

(a) Account for the following: (i) Ozone is thermodynamically unstable. (ii) Solid PCl5 is ionic in nature. (iii) Fluorine forms only one oxoacid HOF.

(b) Draw the structures of (i) BrF5 (ii) XeF4 [CBSE Delhi 2016]

Solution.

(a) (i) Ozone is thermodynamically unstable with respect to oxygen as its decomposition into oxygen results in the liberation of heat (ΔH is −ve) and an increase in entropy (ΔS is +ve). These two effects reinforce each other, resulting in large negative Gibbs energy change (ΔG) for its conversion into oxygen. (ii) In solid state, PCl5 exists as [PCl4]+ [PCl6]− and conducts electricity on melting. (iii) Due to small size and high electronegativity, fluorine forms only one oxoacid HOF.

(b) (i) BrF5 (square pyramidal)

BrFFFFFBrF₅: square pyramidal

(ii) XeF4 (square planar)

XeFFFFXeF₄: square planar

Teacher's Note: Ozone's decomposition releases heat and raises entropy, so ΔG is strongly negative.

Exam Note: State the signs of ΔH and ΔS.

Question 13. Answer the following question:

(a) Complete the following chemical reaction equations: (i) P4 + SO2Cl2 → (ii) XeF6 + H2O →

(b) Predict the shape and the asked angle (90° or more or less) in each of the following cases: (i) SO32− and the angle O–S–O (ii) ClF3 and the angle F–Cl–F (iii) XeF2 and the angle F–Xe–F [CBSE Delhi 2012]

Solution.

(a) (i) P4 + 10SO2Cl2 → 4PCl5 + 10SO2; (ii) XeF6 + 3H2O → XeO3 + 6HF

(b) (i) There are three bond pairs and one lone pair of electrons around S atom in SO32−. Therefore, according to VSEPR theory, SO32− should be pyramidal. The angle O–S–O is greater than 90°.

SOO⁻O⁻SO₃²⁻: pyramidal

(ii) There are three bond pairs and two lone pairs of electrons around Cl atom in ClF3. Therefore, according to VSEPR theory, ClF3 should be bent T-shaped. The angle F–Cl–F is less than 90°.

ClFFFClF₃: slightly bent T-shape

(iii) There are two bond pairs and three lone pairs of electrons around Xe atom in XeF2. Therefore, according to VSEPR theory, XeF2 should be linear. The angle F–Xe–F is greater than 90°.

XeFFXeF₂: linear (2 bond pairs, 3 lone pairs)

Teacher's Note: Count pairs: SO32− is 3+1 pyramidal, ClF3 is 3+2 T-shaped, XeF2 is 2+3 linear.

Exam Note: State each angle relative to 90°.

Question 14. Answer the following question:

(a) Complete the following chemical equations: (i) XeF4 + SbF5 → (ii) Cl2 + F2 (excess) →

(b) Explain each of the following: (i) Nitrogen is much less reactive than phosphorus. (ii) The stability of +5 oxidation state decreases down group 15. (iii) The bond angles (O–N–O) are not of the same value in NO2− and NO2+. [CBSE Delhi 2012]

Solution.

(a) (i) XeF4 + SbF5 → [XeF3]+ [SbF6]−; (ii) Cl2 + 3F2 (excess) →(573 K) 2ClF3

(b) (i) As N≡N triple bond (941.4 kJ mol–1) is much stronger than P–P single bond (213 kJ mol–1), therefore nitrogen is much less reactive than phosphorus. (ii) Due to inert pair effect stability of +5 oxidation decreases down the group 15. (iii) In NO2−, nitrogen has a lone pair of electrons. As lone pair–bond pair repulsion is greater than bond pair–bond pair repulsion, thus O–N–O bond angle in NO2− is less than NO2+.

Teacher's Note: NO2− has a lone pair on nitrogen, so its O–N–O angle is smaller than the linear NO2+.

Exam Note: Quote about 115° and 180°.

Question 15. Answer the following question:

(a) Draw the structures of the following molecules: (i) H3PO2 (ii) ClF3

(b) Explain the following observations: (i) Oxygen is a gas but sulphur a solid. (ii) Despite having greater polarity, hydrogen fluoride boils at a lower temperature than water. (iii) The halogens are coloured. [CBSE (AI) 2012]

Solution.

(a) (i) H3PO2

POHOHHH₃PO₂ (hypophosphorous acid)

(ii) Number of electron pairs around central atom Cl = 5; number of bond pairs = 3; number of lone pairs = 2. The shape is slightly bent T.

ClFFFClF₃: slightly bent T-shape

(b) (i) Because of its small size, oxygen is capable of forming pπ–pπ bond and exists as diatomic O2 molecule. The intermolecular forces in oxygen are weak van der Waals forces, due to which it is a gas at room temperature. On the other hand, sulphur, due to its larger size prefers to form S–S single bond and exists as octaatomic S8 molecule having puckered ring structure. Because of larger size the force of attraction holding the S8 molecules together are much stronger. Hence sulphur is a solid at room temperature. (ii) This is because in H2O hydrogen bond formed is three dimensional whereas in H–F it is linear. (iii) All halogens are coloured. This is due to absorption of radiation in visible region which results in the excitation of outer electrons to higher energy level while the remaining light is transmitted. The colour of the halogen is the colour of transmitted light.

Teacher's Note: Oxygen forms pπ–pπ bonded O2 held by weak forces; sulphur forms puckered S8 rings held strongly.

Exam Note: Contrast O2 and S8 molecular size.

Question 16. Answer the following question:

When conc. H2SO4 was added into an unknown salt present in a test tube, a brown gas (A) was evolved. This gas intensified when copper turnings were also added into this test tube. On cooling, the gas (A) changed into a colourless gas (B).

(a) Identify the gases A and B.

(b) Write the equations for the reactions involved.

Also arrange the following in order of property indicated for each set: (i) F2, Cl2, Br2, I2 — increasing bond dissociation enthalpy. (ii) HF, HCl, HBr, HI — increasing acid strength. (iii) NH3, PH3, AsH3, SbH3, BiH3 — increasing base strength. [HOTS]

Solution.

(a) A = NO2(g), B = N2O4(g)

(b) MNO3 + H2SO4 →(heat) MHSO4 + HNO3; 4HNO3 →(heat) 4NO2 + 2H2O + O2; Cu + 4HNO3 →(heat) Cu(NO3)2 + 2H2O + 2NO2; 2NO2 ⇌ N2O4 (brown gas on cooling gives colourless)

Arrangement. (i) I2 < F2 < Br2 < Cl2. Bond dissociation enthalpy decreases with increase in the size of the atom as we move from Cl to I. The low F—F bond dissociation enthalpy is due to the fact that F atom is very small in size and hence the three lone pairs of electrons on each F atom repel the bond pair of F—F bond very strongly.

(ii) As the size of atom increases from F to I, the bond dissociation enthalpy of H—X bond decreases from H—F to H—I. Therefore, the acid strength increases in the opposite order: HF < HCl < HBr < HI.

(iii) As we move from NH3 to BiH3, the size of the central atom increases. Consequently, the electron density on the central atom decreases and hence the basic strength decreases as we move from NH3 to BiH3. Therefore, the basic strength increases in the order: BiH3 < SbH3 < AsH3 < PH3 < NH3.

Teacher's Note: Concentrated sulphuric acid frees HNO3, which decomposes to brown NO2; cooling dimerises it to colourless N2O4.

Exam Note: Name A and B before equations.

Question 17. Account for the following:

(a) When NaBr is heated with conc. H2SO4, Br2 is produced but when NaCl is heated with conc. H2SO4, HCl is produced.

(b) H2S acts only as a reducing agent but SO2 acts both as a reducing agent as well as an oxidising agent.

(c) The acid strength decreases in the order: HCl > H2S > PH3.

Also give the formula and describe the structure of a noble gas species which is isostructural with IBr2−. [HOTS]

Solution.

(a) When NaBr is heated with conc. H2SO4, HBr is first produced which being a reducing agent reduces H2SO4 to SO2 while HBr itself gets oxidised to Br2. NaBr + H2SO4 → NaHSO4 + HBr; 2HBr + H2SO4 → 2H2O + SO2 + Br2. As a result, only Br2 is produced. Similarly, NaCl reacts with conc. H2SO4 to form HCl. Since HCl does not act as a reducing agent, it does not get oxidised to Cl2. NaCl + H2SO4 → NaHSO4 + HCl; HCl + H2SO4 → no action. As a result, only HCl is produced.

(b) The minimum oxidation number (O.N) of S is −2 while its maximum O.N is +6. In SO2, the O.N of sulphur is +4, hence, it can not only increase its O.N by losing electrons but also reduce its O.N by gaining electrons. Thus, it acts both as a reducing agent as well as an oxidising agent. In contrast, in H2S, S has an O.N of −2. Thus, it can only increase its O.N by losing electrons and hence acts only as a reducing agent.

(c) Greater the polarity of the H–A bond, more easily the bond breaks and hence greater is the acid strength. As the electronegativity of atom A decreases in the order Cl > S > P, therefore the polarity of the bond decreases in the order HCl > H–S > H–P and hence the acid strength decreases in the same order HCl > H2S > PH3.

Noble gas species. Total number of electron pairs around central atom I in IBr2− = 5 electron pairs (2 bond pairs, 3 lone pairs). Therefore, according to VSEPR theory, IBr2− should be linear.

IBrBrIBr₂⁻: linear (2 bond pairs, 3 lone pairs)

Now a noble gas compound having 10 electrons in the valence shell of central atom is XeF2 (8 + 2 × 1 = 10). As it has 2 bond pairs and 3 lone pairs around Xe, therefore, like IBr2−, XeF2 is also linear.

XeFFXeF₂: linear (2 bond pairs, 3 lone pairs)

Teacher's Note: HBr reduces H2SO4 and is oxidised to bromine, whereas HCl is too weak a reductant to give Cl2.

Exam Note: Write both HBr steps.

Question 18. Answer the following question:

(a) Arrange the following in the order of property indicated against each set: (i) HF, HCl, HBr, HI — increasing bond dissociation enthalpy (ii) H2O, H2S, H2Se, H2Te — increasing acidic character

(b) X2 is a greenish yellow gas with pungent smell and used in purification of water. On dissolving in water it gives a solution which turns blue litmus red. When it is passed through NaBr solution Br2 is obtained. (i) Identify the gas. (ii) What are products obtained when X2 reacts with ammonia? Give chemical equations. (iii) What happens when X2 reacts with cold and dilute NaOH solution? Write chemical equation and give the name of reaction.

Solution.

(a) (i) Shorter the bond length, higher is the bond dissociation enthalpy of hydrogen halide. As the atomic size increases down the group the E–H (E = F, Cl, Br, I) bond length increases and hence the bond dissociation enthalpy increases in the reverse order, i.e., HI < HBr < HCl < HF. (ii) H2O < H2S < H2Se < H2Te. The increase in acidic character from H2O to H2Te is due to decrease in bond enthalpy for dissociation of H—E (E = O, S, Se, Te) bond down the group.

(b) (i) X2 = Cl2. (ii) With excess NH3: 8NH3 + 3Cl2 → 6NH4Cl + N2. With excess Cl2: NH3 + 3Cl2 → NCl3 + 3HCl. (iii) 2NaOH (cold and dil.) + Cl2 → NaCl + NaOCl + H2O. This is a disproportionation reaction.

Teacher's Note: Shorter, stronger H–F gives the highest dissociation enthalpy; Cl2 disproportionates in cold dilute NaOH.

Exam Note: Name the reaction as disproportionation.

Question 19. Explain the following: [CBSE Sample Paper 2016]

(a) Hydrogen fluoride is a weaker acid than hydrogen chloride in aqueous solution.

(b) PCl5 is ionic in nature in the solid state.

(c) SF6 is inert towards hydrolysis.

(d) H3PO3 is diprotic.

(e) Out of noble gases only xenon is known to form established chemical compounds.

Solution.

(a) It is due to (i) higher H—F bond dissociation energy than H—Cl and (ii) stronger H-bonding of F− ion with H3O+ than Cl−.

(b) This is because in solid state PCl5 exists as [PCl4]+ [PCl6]− in which cation is tetrahedral and the anion is octahedral. On melting, these ions become free to move and hence it conducts electricity.

(c) In SF6, S atom is sterically protected by six F atoms and does not allow water molecules to attack the S atom. Further, F does not have d-orbitals to accept the electrons donated by H2O molecules. Due to these reasons, SF6 is kinetically an inert substance.

(d) Since H3PO3 contains only two ionisable H-atoms which are present as OH-groups, it is diprotic.

POHOHHOH₃PO₃ (two P–OH groups, one P–H)

(e) Except radon which is radioactive, xenon has least ionisation enthalpy among noble gases hence it forms compounds particularly with O2 and F2.

Teacher's Note: Only the two O–H hydrogens of H3PO3 ionise; the P–H hydrogen does not.

Exam Note: Draw H3PO3 showing P–H and two P–OH.

Question 20. Answer the following question:

(a) Account for the following: (i) SnCl4 is more covalent than SnCl2. (ii) Tendency to form pentahalides decreases down the group in group 15 of the periodic table.

(b) Complete the following chemical equations: (i) P4 + SO2Cl2 → (ii) XeF2 + H2O → (iii) I2 + HNO3 (conc.) →

Solution.

(a) (i) The oxidation states of central atom Sn in SnCl4 and SnCl2 are +4 and +2 respectively. +4 state of Sn has higher polarising power which, in turn, increases the covalent character of bond formed between the central atom and the other atoms. (ii) This is due to inert pair effect. The stability of +5 oxidation state decreases down the group in group 15.

(b) (i) P4 + 10SO2Cl2 → 4PCl5 + 10SO2; (ii) 2XeF2 + 2H2O → 2Xe + 4HF + O2; (iii) [2HNO3 (conc.) → H2O + 2NO2 + (O)] × 5; I2 + 5(O) → I2O5; I2O5 + H2O → 2HIO3. Net: I2 + 10HNO3 (conc.) → 2HIO3 + 10NO2 + 4H2O

Teacher's Note: Sn4+ polarises chloride more than Sn2+, so SnCl4 is covalent; conc. HNO3 oxidises iodine to HIO3.

Exam Note: Apply Fajans' rule to Sn4+.

Question 21. An element 'A' exists as a yellow solid in standard state. It forms a volatile hydride 'B' which is a foul smelling gas and is extensively used in qualitative analysis of salts. When treated with oxygen, 'B' forms an oxide 'C' which is a colourless, pungent smelling gas. This gas when passed through acidified KMnO4 solution, decolourises it. 'C' gets oxidised to another oxide 'D' in the presence of a heterogeneous catalyst. Identify 'A', 'B', 'C', 'D' and also give the chemical equation of reaction of 'C' with acidified KMnO4 solution and for conversion of 'C' to 'D'. [HOTS]

Solution.

'A' = sulphur, 'B' = H2S gas, 'C' = SO2 gas, 'D' = SO3 gas.

Reactions are:

[MnO4− + 8H+ + 5e− → Mn2+ + 4H2O] × 2

[SO2 + 2H2O → SO42− + 4H+ + 2e−] × 5

2MnO4− + 5SO2 + 2H2O → 2Mn2+ + 5SO42− + 4H+

2SO2(g) + O2(g) →(V2O5(s)) 2SO3(g)

Teacher's Note: Rotten-egg H2S burns to SO2, which reduces acidified KMnO4 and is oxidised over a V2O5 catalyst to SO3.

Exam Note: Write the ionic equation for MnO4− with SO2.

Question 22. On heating compound (A) gives a gas (B) which is a constituent of air. This gas when treated with 3 mol of hydrogen (H2) in the presence of a catalyst gives another gas (C) which is basic in nature. Gas C on further oxidation in moist condition gives a compound (D) which is a part of acid rain. Identify compounds (A) to (D) and also give necessary equations of all the steps involved. [NCERT Exemplar] [HOTS]

Solution.

A = NH4NO2, B = N2, C = NH3, D = HNO3.

Equations of all the steps involved:

(i) NH4NO2 →(heat) N2 + 2H2O

(ii) N2 + 3H2 → 2NH3

(iii) 4NH3 + 5O2 → 4NO + 6H2O

2NO + O2 → 2NO2

3NO2 + H2O → 2HNO3 + NO

Teacher's Note: Ammonium nitrite gives N2; N2 and H2 give NH3; its oxidation finally yields nitric acid of acid rain.

Exam Note: Write all four steps in sequence.

Question 23. On heating, lead (II) nitrate gives a brown gas 'A'. The gas 'A' on cooling changes to colourless solid 'B'. Solid 'B' on heating with NO changes to a blue solid 'C'. Identify 'A', 'B', 'C' and also write reactions involved and draw the structures of 'B' and 'C'. [NCERT Exemplar] [HOTS]

Solution.

A = NO2 (brown), B = N2O4 (colourless solid), C = N2O3 (blue solid).

2Pb(NO3)2 →(Δ, 673 K) 2PbO + 4NO2 + O2

2NO2 ⇌ N2O4 (on cooling forms; on heating reverses)

2NO + N2O4 →(250 K) 2N2O3

Structure of N2O4:

N⁺N⁺OO⁻OO⁻N⁺N⁺O⁻OO⁻O↕N₂O₄: two resonance structures

Structure of N2O3:

NN⁺OOO⁻NN⁺OO⁻O↕N₂O₃: two resonance structures

Teacher's Note: Lead nitrate gives brown NO2, which dimerises on cooling; NO with N2O4 gives blue N2O3.

Exam Note: State the temperature for each step.

Question 24. A translucent white waxy solid (A) on heating in an inert atmosphere is converted to its allotropic form (B). Allotrope (A) on reaction with very dilute aqueous KOH liberates a highly poisonous gas (C) having rotten fish smell. With excess of chlorine it forms (D) which hydrolyses to compound (E). Identify compounds (A) to (E). [HOTS]

Solution.

A = white phosphorus, B = red phosphorus, C = phosphine (PH3), D = phosphorus pentachloride (PCl5), E = phosphoric acid (H3PO4).

Reactions are:

P4(s) →(heat, inert gas) P4(s) (white to red)

P4(g) + 3KOH(aq) + 3H2O →(heat) 3KH2PO2(aq) + PH3(g)

PH3 + 4Cl2 → PCl5 + 3HCl

PCl5 + 4H2O → H3PO4 + 5HCl

Teacher's Note: White phosphorus converts to red on heating, gives PH3 with alkali, and PCl5 with excess chlorine.

Exam Note: Identify all five before writing equations.

Class 12 Mathematics: Xam Idea Solutions for Xam Idea Solutions Class 12 Chemistry Chapter 7 The P Block Elements Long Answer Questions

Chapter-wise Xam Idea Solutions: Xam Idea Solutions Class 12 Chemistry Chapter 7 The P Block Elements Long Answer Questions

Explore reliable mathematical solutions for Xam Idea Solutions Class 12 Chemistry Chapter 7 The P Block Elements Long Answer Questions tailored for Class 12 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.

Mastering Core Concepts with Xam Idea Solutions

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Complete Your Class 12 Exam Preparation

In addition to these Xam Idea Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.

FAQs

What are these [current-page:node:field_author] Solutions for Class 12 Chemistry?

They are chapter-wise solved questions from the book for Class 12 Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 12 Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 12 Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 12 Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 12 Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.