Xam Idea Solutions Class 12 Chemistry Chapter 4 Chemical Kinetics Short Answer Questions I

Solutions for Class 12 Chemistry: Chapter 04 Chemical Kinetics

Review structured textbook solutions for Class 12 Chemistry Chapter 04 Chemical Kinetics prepared by . Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.

Practice Class 12 Chemistry Solutions: Chapter 04 Chemical Kinetics

View or download the dedicated Chapter 04 Chemical Kinetics solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Chemistry.

Short Answer Questions I

Question 1. Answer the following questions:

Explain why H2 and O2 do not react at room temperature.

Solution.

Due to high activation energy for the reaction.

Q. Write the rate equation for the reaction A2+3B2→2C, if the overall order of the reaction is zero.

[CBSE (AI) 2017]

Ans. Rate = k[A2]0[B2]0 or Rate = k

Teacher's Note: Hydrogen and oxygen need to cross a high activation energy barrier to react at room temperature.

Exam Note: Mention activation energy and note that kinetics, not thermodynamics, controls this.

Question 2. What do you understand by the rate law and rate constant of a reaction? Identify the order of a reaction if the units of its rate constant are: [CBSE (AI) 2011] L–1 mol s–1 i. L mol–1 s–1. ii.

Solution.

An experimentally determined expression which relates the rate of reaction with the concentration of reactants is called rate law while the rate of reaction when concentration of each reactant is unity in a rate law expression is called rate constant.

Comparing power of mole in L–1 mol s–1 and (mol L–1)1–n s–1, We get

1 = l – n ⇒ n = 0 i.e., zero order reaction

Again comparing power of mole in L mol–1s–1 and (molL–1)1–ns–1, we get

–1 = 1 – n ⇒ n = 2, i.e., second order reaction

Teacher's Note: The rate law relates rate to reactant concentrations with experimentally determined powers, and the rate constant is the proportionality factor.

Exam Note: Define both and state the order from the given rate law.

Question 3. Why does the rate of any reaction generally decrease during the course of the reaction? [NCERT Exemplar]

Solution.

The rate of reaction depends on the concentration of reactants. As the reaction progresses, reactants start getting converted to products so the concentration of reactants decreases hence the rate of reaction decreases.

Teacher's Note: Reactant concentration falls as the reaction proceeds, so the rate falls.

Exam Note: Link rate to concentration of reactants.

Question 4. Why is molecularity applicable only for elementary reactions and order is applicable for elementary as well as complex reactions? [NCERT Exemplar]

Solution.

A complex reaction proceeds through several elementary reactions. Number of molecules involved in each elementary reaction may be different, i.e., the molecularity of each step may be different. Therefore, discussion of molecularity of overall complex reaction is meaningless. On the other hand, order of a complex reaction is determined by the slowest step in its mechanism and is not meaningless even in the case of complex reactions.

Teacher's Note: Molecularity belongs to single-step reactions, while order comes from experiment and fits any reaction.

Exam Note: Mention complex reactions have many steps, so only order applies.

Question 5. For a zero order reaction will the molecularity be equal to zero? Explain. [NCERT Exemplar]

Solution.

No, the molecularity can never be equal to zero or a fractional number. Molecularity is the number of molecules involved in each elementary reaction which may be different, i.e., the molecularity of each step may be different.

Teacher's Note: Molecularity counts colliding species in an elementary step, so it is a whole number and never zero.

Exam Note: State no, and mention it cannot be zero or fractional.

Question 6. For a reaction: A + H2O → B, Rate ∝ [A]. What is its (i) molecularity (ii) order of reaction?

Solution.

i. Pseudo unimolecular ii. Order = 1.

Teacher's Note: Water is in large excess so its concentration is effectively constant, making this a pseudo unimolecular reaction of first order.

Exam Note: Give both answers; mention excess water in the explanation.

Question 7. Define the following: Elementary step in a reaction

Solution.

Elementary step: The reaction which takes place in a single step is called an elementary reaction. For example, N2(g) + O2(g) → 2NO(g)

Teacher's Note: An elementary reaction occurs in a single step without intermediates.

Exam Note: Give definition and one example.

Question 8. Define the following: Rate of reaction [CBSE (AI) 2009; (F) 2010]

Solution.

Rate of reaction: The rate of reaction may be defined as the decrease in concentration of reactant or increase in concentration of product per unit time.

For a hypothetical reaction, R → P: Rate of reaction = −Δ[R]/Δt = +Δ[P]/Δt

Teacher's Note: Rate measures how fast reactant concentration falls or product concentration rises.

Exam Note: Write both reactant and product forms.

Question 9. Write two differences between ‘order of reaction’ and ‘molecularity of reaction’. [CBSE Delhi 2014]

Solution.

Differences between order and molecularity of reaction:

S.No.OrderMolecularity
(i)It is the sum of the powers of the concentration of the reactants in the rate law expression.It is the number of reacting species taking part in an elementary reaction, which must collide simultaneously so as to result into a chemical reaction.
(ii)It is determined experimentally.It is a theoretical concept.
(iii)It can be zero or a fraction.It cannot be zero or a fraction.
(iv)Order is applicable to elementary as well as complex reactions.Molecularity is applicable only for elementary reactions. For complex reactions it has no meaning.

Teacher's Note: Order is experimental and can be fractional; molecularity is theoretical and a whole number.

Exam Note: Give any two differences.

Question 10. For a reaction: 2NH3(g) → N2(g) + 3H2(g) (catalyst Pt), Rate = k
(i) Write the order and molecularity of this reaction.
(ii) Write the unit of k. [CBSE South 2016]

Solution.

(i) Zero order, bimolecular

(ii) mol L−1 s−1

Teacher's Note: Rate independent of concentration means zero order; two NH3 molecules are shown reacting.

Exam Note: Zero order gives rate constant units of rate.

Question 11. Define the following terms: Pseudo first order reaction

Solution.

A reaction which is not truely of first order but under certain conditions becomes a reaction of first order is called pseudo first order reaction, e.g., acid hydrolysis of ethyl acetate.

CH3COOC2H5 + H2O →(H+) CH3COOH + C2H5OH

Rate ∝ [CH3COOC2H5] as H2O is in excess.

Teacher's Note: Excess water keeps its concentration nearly constant, so rate depends on ester alone.

Exam Note: Give definition and the ester hydrolysis example.

Question 12. Define the following terms: Half life period of reaction (t1/2) [CBSE Delhi 2014]

Solution.

The half life (t1/2) of a reaction is the time in which the concentration of reactant is reduced to one half of its initial concentration [R]0.

For a first order reaction, t1/2 = 0.693/k, i.e., independent of [R]0.

For a zero order reaction, t1/2 = [R]0/2k, i.e., t1/2 ∝ [R]0.

Teacher's Note: Half-life is the time to reach half the initial concentration.

Exam Note: Add the formulae for zero and first order.

Question 13. A first order reaction is found to have a rate constant k = 5.5 × 10−14 s−1. Find the half life of the reaction. [CBSE (AI) 2013]

Solution.

Radioactive decay follows first order kinetics.

t1/2 = 0.693/k = 0.693/(5.5 × 10−14) s = 1.26 × 1013 s

Teacher's Note: For first order, half-life is 0.693 divided by the rate constant.

Exam Note: Use t1/2 = 0.693/k.

Question 14. A reaction is of second order with respect to a reactant. How is the rate of reaction affected if the concentration of the reactant is reduced to half? What is the unit of rate constant for such a reaction? [CBSE (AI) 2011]

Solution.

Consider the reaction nR → Products. As the reaction is of second order, Rate, r = k[R]2 ...(i)

If the concentration of the reactant is reduced to half, then Rate, r' = k[R/2]2 ...(ii)

Dividing equation (ii) by (i), we get r'/r = k[R]2/4k[R]2 = 1/4

r' = (1/4)r, i.e., rate of reaction becomes 1/4th of the initial rate.

The unit of rate constant is mol−1 L s−1.

Teacher's Note: Halving the concentration of a second order reactant cuts the rate to one-fourth.

Exam Note: Divide the new rate by the old rate.

Question 15. Show that in a first order reaction, time required for completion of 99.9% is 10 times that of half-life (t1/2) of the reaction. [CBSE (F) 2016]

Solution.

t = (2.303/k) log([R]0/[R])

t99.9%/t50% = log(100/(100 − 99.9)) / log(100/(100 − 50)) = log(100/0.1) / log(100/50) = log 103 / log 2 = 3/0.3010

t99.9%/t50% = 30/3.01 ≈ 10

∴ t99.9% = 10 t50%

Teacher's Note: Compare log 1000 with log 2 using the first order integrated equation.

Exam Note: Use t = (2.303/k) log([R]0/[R]).

Question 16. For a chemical reaction R → P, the variation in the concentration [R] vs. time (t) plot is given as (Graph: [R] falls in a straight line with time.)
(i) Predict the order of the reaction.
(ii) What is the slope of the curve? [CBSE (AI) 2014]

Solution.

Rt

(i) Order of the reaction is zero.

(ii) Slope = d[R]/dt = −k

Teacher's Note: A straight-line fall of concentration with time shows zero order.

Exam Note: Zero order; slope equals −k.

Question 17. The rate constant for a first order reaction is 60 s−1. How much time will it take to reduce the initial concentration of the reactant to 1/10th of its initial value? [CBSE (F) 2013]

Solution.

t = (2.303/k) log([R]0/[R]) as [R] = [R]0/10

∴ t = (2.303/60) log 10 = (2.303/60) × 1 = 3.838 × 10−2 s

Teacher's Note: For first order, time depends on the log of the concentration ratio.

Exam Note: Substitute [R] = [R]0/10.

Question 18. The rate constant for a zero order reaction is 0.0030 mol L−1 s−1. How long will it take for the initial concentration of the reactant to fall from 0.10 M to 0.075 M? [CBSE (F) 2010]

Solution.

Given: [R]0 = 0.10 M, [R] = 0.075 M, k = 0.0030 mol L−1 s−1, t = ?

We know that k = ([R]0 − [R])/t

or t = ([R]0 − [R])/k = (0.10 − 0.075)/0.0030 = 8.33 s.

Teacher's Note: For zero order, concentration falls linearly with time.

Exam Note: Use k = ([R]0 − [R])/t.

Question 19. Differentiate between rate of reaction and reaction rate constant.

Solution.

S. No.Rate of ReactionReaction Rate Constant
(i)Rate of reaction is the change in concentration of a reactant or product in a unit interval of time.It is the rate of reaction when the molar concentration of each of the reactants is unity.
(ii)The rate of reaction at any instant of time depends upon the molar concentrations of the reactants at that time.The rate constant does not depend upon the concentrations of the reactants.
(iii)Its units are always mol litre−1 time−1.Its units depend upon the order of reaction.

Teacher's Note: Rate changes with concentration; the rate constant does not.

Exam Note: Give at least two differences.

Question 20. The form of the rate law for a reaction is expressed as: rate = k[Cl2][NO]2. Find out the orders of the reaction with respect to Cl2 and with respect to NO and also the overall order of this reaction.

Solution.

Order with respect to Cl2 = 1, Order with respect to NO = 2,

Overall order = 1 + 2 = 3

Teacher's Note: Each exponent gives the order for that reactant; the sum is the overall order.

Exam Note: Read exponents from the rate law.

Question 21. Calculate the overall order of a reaction which has the rate expression,
(i) Rate = k[A]1/2[B]3/2
(ii) Rate = k[A]3/2[B]−1

Solution.

(i) Order = 1/2 + 3/2 = 2, i.e., second order.

(ii) Order = 3/2 + (−1) = 1/2, i.e., half order.

Teacher's Note: Overall order is the algebraic sum of exponents, which can be fractional or negative.

Exam Note: Add the exponents.

Question 22. The conversion of the molecule X to Y follows second order kinetics. If the concentration X is increased to three times, how will it affect the rate of formation of Y?

Solution.

Rate = k[X]2

r1 = k[X]2 ...(i)

r2 = k[3X]2 ...(ii)

Dividing (ii) by (i), r2/r1 = 9k[X]2/k[X]2 or r2 = 9r1

Thus, rate of formation of Y will increase by nine times.

Teacher's Note: For second order, tripling concentration raises rate by 32 = 9 times.

Exam Note: Square the concentration factor.

Question 23. The specific reaction rate of a reaction is 6.2 × 10−3 mol L−1 s−1. What is the order of reaction?

Solution.

Comparing the unit of k, with the general unit (mol L−1)1−n s−1, we get

mol1−n = mol1

1 − n = 1 ⇒ n = 0, i.e., zero order reaction.

Teacher's Note: Units of mol L−1 s−1 match a zero order rate constant.

Exam Note: Compare units with (mol L−1)1−n s−1.

Question 24. The rate law for the reaction: Ester + H+ → Acid + Alcohol is: dx/dt = k[Ester][H+]0. What would be the effect on the rate if (i) concentration of the ester is doubled? (ii) concentration of H+ is doubled?

Solution.

(i) The rate of reaction will be doubled. (ii) No effect on rate.

Teacher's Note: Rate is first order in ester and zero order in H+.

Exam Note: Use the given exponents.

Question 25. Derive an expression to calculate time required for completion of zero order reaction. [NCERT Exemplar]

Solution.

t = ([R]0 − [R])/k

For completion, [R] = 0

∴ t = [R]0/k

Teacher's Note: Zero order concentration falls linearly; completion occurs when [R] reaches zero.

Exam Note: Start from [R] = −kt + [R]0.

Question 26. The rate constant for a reaction of zero order in A is 0.0030 mol L−1 s−1. How long will it take for the initial concentration of A to fall from 0.10 M to 0.075 M?

Solution.

k = 0.0030 mol L−1 s−1, [R]0 = 0.10 M, [R] = 0.075 M

We know that [R] = −kt + [R]0

0.075 = −0.0030t + 0.10 ⇒ 3t = 100 − 75 ⇒ t = 8.33 seconds

Teacher's Note: For zero order, subtract the final concentration from the initial and divide by k.

Exam Note: Use [R] = −kt + [R]0.

Question 27. The following data were obtained during the first order thermal decomposition of SO2Cl2 at a constant volume: SO2Cl2(g) → SO2(g) + Cl2(g)

ExperimentTime/secondTotal pressure/atm
100.4
21000.7
Calculate the rate constant. (Given: log 4 = 0.6021, log 2 = 0.3010) [HOTS]

Solution.

k = (2.303/t) log(P0/(2P0 − Pt))

Here, P0 = 0.4 atm, t = 100 s, Pt = 0.7 atm

∴ k = (2.303/100) log(0.4/(2 × 0.4 − 0.7)) = (2.303/100) log(0.4/0.1) = (2.303/100) log 4 = (2.303/100) × 0.6021

k = 1.386 × 10−2 s−1

Teacher's Note: Total pressure rises as SO2Cl2 decomposes; pressure of reactant is 2P0 − Pt.

Exam Note: Express reactant pressure as 2P0 − Pt.

Question 28. 87.5% of the substance disintegrated in 45 minutes (first order reaction). What is its half-life?

Solution.

(1/2)n = 12.5/100 because 87.5% has disintegrated, amount left is 12.5%.

(1/2)n = (1/8) ⇒ (1/2)n = (1/2)3

Number of half lives = 3

t1/2 = 45/3 = 15 minutes

Teacher's Note: 87.5% decay leaves 12.5%, which is three half-lives.

Exam Note: Count half-lives, then divide the time.

Question 29. The rate for the reaction R → P is rate = k[R]. It has been shown graphically below. What is rate constant for the reaction? (Graph: rate vs [R]; rate is 1 × 10−2 mol L−1 s−1 at 0.1 mol L−1 and 3 × 10−2 at 0.3 mol L−1.)

Solution.

1×10−22×10−23×10−20.10.20.3O[R] (mol L−1)Rate (mol L−1 s−1)

From the graph

Case I: Rate = k[A] ⇒ 1 × 10−2 mol L−1 s−1 = k (0.1 mol L−1) ∴ k = 0.1 s−1

Case II: 3 × 10−2 mol L−1 s−1 = k (0.3 mol L−1) ⇒ k = 0.1 s−1

Hence, k = 0.1 s−1

Teacher's Note: The slope of rate against concentration gives the first order rate constant.

Exam Note: Read two points; divide rate by concentration.

Question 30. Answer the following questions on the basis of the given plot of potential energy vs reaction coordinate:
(i) What is the threshold energy for the reaction?
(ii) What is the activation energy for forward reaction?
(iii) What is the activation energy for backward reaction?
(iv) What is enthalpy change for the forward reaction?

Solution.

50100150200250300RCPReaction CoordinatePotential Energy (kJ)

(i) Threshold energy for the reaction = 300 kJ mol−1

(ii) Activation energy for the forward reaction = 300 − 150 = 150 kJ mol−1

(iii) Activation energy for the backward reaction = 300 − 100 = 200 kJ mol−1

(iv) Enthalpy change for the forward reaction, ΔrH = 100 − 150 = −50 kJ mol−1

Teacher's Note: Activation energy is peak energy minus the energy of the reactants or products.

Exam Note: Read heights of R, C and P.

Question 31. A graph between ln k and 1/T for a reaction is given. Here k is rate constant and T is temperature in Kelvin. If OA = a and OB = b, answer the following: (i) What is the activation energy (Ea) of the reaction? (ii) What is the frequency factor (A) for the reaction? [HOTS]

Solution.

BAOln k1/Txy

According to Arrhenius equation, ln k = −Ea/RT + ln A

(i) Slope = −OB/OA = −b/a = −Ea/R or Ea = (b/a)R

(ii) Intercept on y-axis = OB = b = ln A or A = eb

Teacher's Note: Slope of ln k against 1/T is −Ea/R; the intercept is ln A.

Exam Note: Compare with ln k = ln A − Ea/RT.

Question 32. Rate constant k for first order reaction has been found to be 2.54 × 10−3 s−1. Calculate its three-fourth life. [CBSE Sample Paper 2013]

Solution.

t = (2.303/k) log([R]0/[R]) ...(i)

k = 2.54 × 10−3 s−1; [R] = [R]0/4

Substituting these values in equation (i), we get t3/4 = (2.303/(2.54 × 10−3)) log 4 = 0.9066 × 103 log 4

t3/4 = 0.9066 × 103 × 0.6021 s = 5.46 × 102 s

Teacher's Note: Three-fourth life is the time when 3/4 has reacted, leaving [R]0/4.

Exam Note: Put [R] = [R]0/4.

Question 33. After 24 hrs, only 0.125 gm out of the initial quantity of 1 gm of a radioactive isotope remains behind. What is its half life period? [CBSE Sample Paper 2017]

Solution.

Here, [R]0 = 1 g, [R] = 0.125 g, t = 24 h

k = (2.303/t) log([R]0/[R]) = (2.303/24) log(1/0.125) = (2.303/24) log 8 = (2.303/24) × 0.9031

k = 0.0866 h−1

t1/2 = 0.693/k = 0.693/0.0866 h−1 or t1/2 = 8 h

Teacher's Note: 1 g falling to 0.125 g is three half-lives, so 24 h gives 8 h.

Exam Note: Use k first, then t1/2 = 0.693/k.

Question 34. A first order gas reaction A2B2(g) → 2A(g) + 2B(g) at the temperature 400°C has the rate constant K = 2.0 × 10−4 s−1. What percentage of A2B2 is decomposed on heating for 900 seconds. [CBSE Sample Paper 2013]

Solution.

k = (2.303/t) log([R]0/[R])

2.0 × 10−4 s−1 = (2.303/900) log([R]0/[R])

log([R]0/[R]) = (2.0 × 10−4 × 900)/2.303 = 0.0781

log([R]/[R]0) = −0.0781 = ̄1.9219

[R]/[R]0 = Antilog ̄1.9219 = 0.835

[R] = 0.835 [R]0. If [R]0 = 100, then [R] = 83.5

[R]0 − [R] = 100 − 83.5 = 16.5, i.e., 16.5% of initial concentration has changed into products.

Teacher's Note: Find the fraction left using the first order equation, then subtract from 100%.

Exam Note: Compute [R]/[R]0 first.

Question 35. Consider the decomposition of hydrogen peroxide in alkaline medium which is catalysed by iodide ions. 2H2O2 →(OH−/I−) 2H2O + O2. This reaction takes place in two steps as given below:
Step-I H2O2 + I− → H2O + IO− (slow)
Step-II H2O2 + IO− → H2O + I− + O2 (fast)
(i) Write the rate law expression and determine the order of reaction w.r.t. H2O2.
(ii) What is the molecularity of each individual step?

Solution.

(i) Rate = k[H2O2]1[I−]1

Order of reaction w.r.t. H2O2 = 1

(ii) Molecularity of step I = 2 and step II = 2.

Teacher's Note: The slow step fixes the rate law; molecularity counts species in each step.

Exam Note: Take the rate law from the slow step.

Xam Idea Solutions for Class 12 Mathematics: Xam Idea Solutions Class 12 Chemistry Chapter 4 Chemical Kinetics Short Answer Questions I

Complete Math Solutions for Xam Idea Solutions Class 12 Chemistry Chapter 4 Chemical Kinetics Short Answer Questions I

Review detailed solutions for Class 12 Mathematics. The Xam Idea Solutions Class 12 Chemistry Chapter 4 Chemical Kinetics Short Answer Questions I PDF provides comprehensive answers mapped to standard Xam Idea Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.

Step-by-Step Mathematical Explanations

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Next Steps in Your Mathematics Revision

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these [current-page:node:field_author] Solutions for Class 12 Chemistry?

They are chapter-wise solved questions from the book for Class 12 Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 12 Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 12 Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 12 Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 12 Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.