Xam Idea Solutions Class 12 Chemistry Chapter 13 Amines Short Answer Questions II

Step-by-Step Solutions for Class 12 Chemistry Chapter 13 Amines

Explore reliable textbook solutions for Chapter 13 Amines tailored for Class 12 learners using methodologies. Utilizing these Chemistry answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.

Download Chapter 13 Amines Textbook Solutions PDF

View or download the dedicated Chapter 13 Amines solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Chemistry.

Short Answer Questions II

Question 1. Account for the following: [CBSE (AI) 2014] [HOTS]

pKb of aniline is more than that of methylamine.

Solution.

In aniline due to resonance, the lone pair of electrons on the N-atom are delocalised over the benzene ring. Due to this, electron densit on the nitrogen decreases. On the other hand, in CH3NH2, +I-effect of CH3increases the electron density on the N-atom. Consequently aniline is a weaker base than methylamine and hence its pKb value is higher than that of methylamine.

Q. Although trimethylamine and n-propylamine have the same molecular weight, but the former boils at a lower temperature (276 K) than the latter (322 K). Explain.

Ans. n-Propylamine has two H-atoms on the N-atom and hence undergoes intermolecular H-bonding, thereby raising its boiling point. Trimethylamine, (CH3)3N, being a tertiary amine does not have any H-atom on the N-atom. As a result, it does not undergo H-bonding and hence its boiling point is low.

Q. (CH3)2NH is more basic than (CH3)3N in an aqueous solution.

Ans. The basicity of amine in aqueous solution depends upon the stability of the substituted ammonium cation. Here the combination of three factors, +ve I effect of CH3 groups, hydrogen bonding and steric hindrance favour greater stability for ammonium cation of dimethyl amine than ammonium cation of trimethyl amine. Hence dimethylamine is stronger base than trimethyl amine.

Teacher's Note: In aniline the nitrogen lone pair is delocalised into the ring, so it is a weaker base than methylamine.

Exam Note: Delocalised lone pair lowers basicity.

Question 2. In the following cases rearrange the compounds as directed: [CBSE Delhi 2010]

In an increasing order of basic strength: C6H5NH2, C6H5N(CH3)2 , (C2H5)2 NH and CH3NH2

Solution.

Increasing order of basic strength is:

C6H5NH2 < C6H5N(CH3)2 < CH3NH2 < (C2H5)2NH

Teacher's Note: Alkylamines are stronger bases than aniline, which is weakened by lone pair delocalisation.

Exam Note: Alkyl raises, aryl lowers basicity.

Question 3. In a decreasing order of basic strength: Aniline, p-nitroaniline and p-toluidine

Solution.

p-Toluidine > Aniline > p-nitroaniline

Teacher's Note: An electron-donating group raises basicity and an electron-withdrawing group lowers it, setting the order.

Exam Note: Donor groups strengthen the base.

Question 4. In an increasing order of pKb values: C2H5NH2 , C6H5NHCH3, (C2H5)2NH and C6H5NH2

Solution.

(C2H5)2NH < C2H5NH2 < C6H5NHCH3 < C6H5NH2

Teacher's Note: A higher pKb means a weaker base, so the order is the reverse of basic strength.

Exam Note: Larger pKb means weaker base.

Question 5. How are the following conversions carried out? (i) Aniline to fluorobenzene (ii) Benzene diazonium chloride to benzene (iii) Methyl chloride to ethylamine

Solution.

(i) Aniline is diazotised (NaNO2/HCl, 273–278 K) to benzenediazonium chloride, which is treated with HBF4 to give benzenediazonium fluoroborate; heating it gives fluorobenzene, BF3 and N2 (Balz–Schiemann reaction).

(ii) C6H5N2+Cl– + H3PO2 + H2O → C6H6 + N2 + H3PO3 + HCl

(iii) CH3Cl + KCN → CH3CN; reduction of CH3CN with Na/C2H5OH (or LiAlH4) gives CH3CH2NH2.

Teacher's Note: Diazonium salts allow replacement of NH2; nitriles reduce to amines with one more carbon.

Exam Note: Write reagents and products.

Question 6. Write chemical equations for the following conversions: (i) Nitrobenzene to benzoic acid (ii) Benzyl chloride to 2-phenylethanamine (iii) Aniline to benzyl alcohol

Solution.

(i) C6H5NO2 → (Sn/HCl) C6H5NH2 → (NaNO2/HCl, 273 K) C6H5N2+Cl– → (CuCN) C6H5CN → (H3O+, heat) C6H5COOH

(ii) C6H5CH2Cl + KCN (alc.) → C6H5CH2CN → (Na(Hg)/C2H5OH, or LiAlH4) C6H5CH2CH2NH2

(iii) C6H5NH2 → (NaNO2/HCl, 273–278 K) C6H5N2+Cl– → (CuCN/KCN) C6H5CN → (H2O/H+) C6H5COOH → (LiAlH4) C6H5CH2OH

Alternatively: C6H5N2+Cl– → (H3PO2/H2O) C6H6 → (CH3Cl/anhyd. AlCl3) C6H5CH3 → (Cl2/hν) C6H5CH2Cl → (NaOH(aq)) C6H5CH2OH

Teacher's Note: Cyanide replaces the diazonium group; hydrolysis gives the acid and LiAlH₄ reduces it to the alcohol.

Exam Note: Write each step with reagent.

Question 7. How would you convert (a) Aniline to nitrobenzene? (b) Aniline to iodobenzene?

Solution.

(a) Aniline is diazotised to C6H5N2+BF4– (NaNO2/HCl, then HBF4), which on heating with Cu and NaNO2 gives nitrobenzene. (Alternatively, aniline can be oxidised directly with peroxytrifluoroacetic acid.)

(b) C6H5NH2 → (NaNO2/HCl, 273–278 K) C6H5N2+Cl– → (KI) C6H5I + N2 + KCl

Teacher's Note: Diazonium group is replaced by NO2 or I using suitable reagents.

Exam Note: Show diazotisation first.

Question 8. Complete the following reaction equation: C₂H₅NH₂ + C₆H₅SO₂Cl → [CBSE (AI) 2009]

Solution.

C₂H₅NH₂ + C₆H₅SO₂Cl → C₆H₅SO₂NHC₂H₅ + HCl

The product is N-ethylbenzenesulphonamide (Hinsberg’s reagent reacts with the primary amine).

Teacher's Note: Hinsberg’s reagent reacts with the N–H of a primary amine to give a sulphonamide that still has an acidic hydrogen.

Exam Note: Write the sulphonamide formula.

Question 9. Complete the following reaction equation: C₂H₅NH₂ + HNO₂ → [CBSE (AI) 2009]

Solution.

C₂H₅NH₂ + HNO₂ → C₂H₅OH + N₂ + H₂O

An aliphatic primary amine gives an alcohol with evolution of nitrogen gas.

Teacher's Note: Aliphatic primary amines form unstable diazonium salts, which at once give an alcohol and bubbles of nitrogen.

Exam Note: Include N₂ and H₂O as products.

Question 10. Give the structures of A, B and C in the following reactions: CH₃Br —(KCN)→ A —(LiAlH₄)→ B —(HNO₂, 273 K)→ C [CBSE Delhi 2014]

Solution.

CH₃Br —(KCN)→ CH₃CN (A) —(LiAlH₄)→ CH₃CH₂NH₂ (B) —(HNO₂, 273 K)→ CH₃CH₂OH (C)

A = ethanenitrile; B = ethanamine; C = ethanol.

Teacher's Note: Cyanide adds a carbon to bromomethane, reduction gives ethanamine, and nitrous acid replaces –NH₂ by –OH.

Exam Note: Name A, B and C.

Question 11. Give the structures of A, B and C in the following reactions: CH₃COOH —(NH₃, Δ)→ A —(Br₂ + KOH)→ B —(CHCl₃ + NaOH)→ C [CBSE Delhi 2014]

Solution.

CH₃COOH —(NH₃, Δ)→ CH₃CONH₂ (A) —(Br₂ + KOH)→ CH₃NH₂ (B) —(CHCl₃ + NaOH)→ CH₃NC (C)

A = ethanamide; B = methanamine; C = methyl isocyanide.

Teacher's Note: Ethanamide undergoes Hofmann degradation to methanamine, which as a primary amine gives the carbylamine test.

Exam Note: Name A, B and C.

Question 12. Write the structures of A, B and C in the following: C₆H₅CONH₂ —(Br₂/aq. KOH)→ A —(NaNO₂ + HCl, 0–5°C)→ B —(KI)→ C [CBSE Delhi 2016]

Solution.

C₆H₅CONH₂ —(Br₂/aq. KOH)→ C₆H₅NH₂ (A) —(NaNO₂ + HCl, 0–5°C)→ C₆H₅N₂⁺Cl⁻ (B) —(KI)→ C₆H₅I (C)

A = aniline; B = benzene diazonium chloride; C = iodobenzene.

Teacher's Note: Hofmann degradation gives aniline, diazotisation gives the diazonium salt, and iodide replaces the diazonium group.

Exam Note: Name A, B and C.

Question 13. Write the structures of A, B and C in the following: CH₃–Cl —(KCN)→ A —(LiAlH₄)→ B —(CHCl₃ + alc. KOH, Δ)→ C [CBSE Delhi 2016]

Solution.

CH₃Cl —(KCN)→ CH₃CN (A) —(LiAlH₄)→ CH₃CH₂NH₂ (B) —(CHCl₃ + alc. KOH, Δ)→ CH₃CH₂N≡C (C)

A = methyl cyanide; B = ethylamine; C = ethyl isocyanide.

Teacher's Note: Methyl chloride gains a carbon through cyanide, reduction gives ethylamine, and the carbylamine reaction forms its isocyanide.

Exam Note: Name A, B and C.

Question 14. Complete the following reactions: C₆H₅COOH —(NH₃)→ A —(Heat)→ B —(Br₂/KOH)→ C [CBSE East 2016]

Solution.

C₆H₅COOH —(NH₃)→ C₆H₅COO⁻NH₄⁺ (A) —(Heat)→ C₆H₅CONH₂ (B) —(Br₂/KOH)→ C₆H₅NH₂ (C)

A = ammonium benzoate; B = benzamide; C = aniline.

Teacher's Note: Ammonium benzoate loses water on heating to give benzamide, which Hofmann degradation converts to aniline.

Exam Note: Name A, B and C.

Question 15. Complete the following reactions: C₆H₅NO₂ —(Fe/HCl)→ A —(NaNO₂ + HCl, 273–278 K)→ B —(CuCN)→ C [CBSE East 2016]

Solution.

C₆H₅NO₂ —(Fe/HCl)→ C₆H₅NH₂ (A) —(NaNO₂ + HCl, 273–278 K)→ C₆H₅N₂⁺Cl⁻ (B) —(CuCN)→ C₆H₅CN (C)

A = aniline; B = benzene diazonium chloride; C = benzonitrile.

Teacher's Note: Nitro reduction gives aniline, and the Sandmeyer-type reaction with CuCN replaces the diazonium group by –CN.

Exam Note: Name A, B and C.

Question 16. Complete the following chemical equation: C₆H₅N₂Cl + C₆H₅NH₂ —(OH⁻)→ [CBSE Delhi 2010]

Solution.

C₆H₅N₂⁺Cl⁻ + C₆H₅NH₂ —(273–278 K, H⁺, pH 4–5)→ C₆H₅–N=N–C₆H₄–NH₂ (p) + HCl

The product is p-aminoazobenzene (yellow dye); this is a coupling reaction.

Teacher's Note: The diazonium ion attacks the para position of aniline, forming a yellow azo dye in this coupling reaction.

Exam Note: Show the –N=N– linkage in the product.

Question 17. Complete the following chemical equation: C₆H₅N₂Cl + CH₃CH₂OH → [CBSE Delhi 2010]

Solution.

C₆H₅N₂⁺Cl⁻ + CH₃CH₂OH → C₆H₆ + N₂ + CH₃CHO + HCl

Ethanol reduces the diazonium salt to benzene and is itself oxidised to ethanal.

Teacher's Note: Ethanol acts as a reducing agent, replacing the diazonium group by hydrogen and forming ethanal.

Exam Note: Include ethanal as the oxidation product.

Question 18. Complete the following chemical equation: RNH₂ + CHCl₃ + KOH → [CBSE Delhi 2010]

Solution.

R–NH₂ + CHCl₃ + 3KOH (alc.) —(Δ)→ R–NC + 3KCl + 3H₂O

A primary amine gives an alkyl isocyanide (carbylamine reaction).

Teacher's Note: Only primary amines give the foul-smelling isocyanide, so this reaction is used as a test for them.

Exam Note: Balance with 3KOH, 3KCl and 3H₂O.

Question 19. Explain why an alkylamine is more basic than ammonia.

Solution.

R–NH₂ + H⁺ ⇌ R–NH₃⁺

Due to electron releasing nature, the alkyl group (R) pushes electrons towards nitrogen in alkyl amine and thus makes the unshared electron pair more available for sharing with the proton of the acid. Therefore, alkyl amines are more basic than ammonia.

Teacher's Note: The alkyl group pushes electrons to nitrogen, so its lone pair accepts a proton more readily than in ammonia.

Exam Note: Mention the +I effect of alkyl groups.

Question 20. Give reasons: Acetylation of aniline reduces its activation effect.

Solution.

Due to resonance the lone pair of electrons on nitrogen of acetanilide gets delocalised towards carbonyl group.

Ar–NH–C(=O)CH₃ ↔ Ar–N⁺H=C(O⁻)CH₃

Hence the electrons are less available for donation to benzene ring by resonance. Therefore, activation effect of aniline is reduced.

Teacher's Note: Nitrogen’s lone pair is pulled toward the carbonyl group, so less of it is donated to the benzene ring.

Exam Note: Show the resonance of the amide group.

Question 21. Give reasons: CH₃NH₂ is more basic than C₆H₅NH₂.

Solution.

In CH₃–NH₂, +I-effect of –CH₃ group increases the electron density on the nitrogen atom making lone pair more available for donation. On the other hand, in aniline lone pair of electron on the nitrogen atom is delocalised over benzene ring due to resonance and thus making it less available for donation. That is why CH₃NH₂ is more basic than C₆H₅NH₂.

Teacher's Note: The methyl group pushes electrons onto nitrogen, while aniline’s lone pair is spread over the ring by resonance.

Exam Note: Contrast +I effect with resonance delocalisation.

Question 22. Give reasons: Although –NH₂ is o/p directing group, yet aniline on nitration gives a significant amount of m-nitroaniline. [CBSE Delhi 2017]

Solution.

This is because in a strongly acidic medium aniline is protonated to form the anilinium ion which is meta directing.

Teacher's Note: The nitrating mixture protonates aniline to –NH₃⁺, which withdraws electrons and directs the nitro group to the meta position.

Exam Note: Name the anilinium ion as meta directing.

Question 23. Give reasons: Aniline does not undergo Friedel–Crafts reaction. [CBSE Central 2016]

Solution.

Aniline being a Lewis base, reacts with Lewis acid AlCl₃ to form a salt.

C₆H₅NH₂ (Lewis base) + AlCl₃ (Lewis acid) → C₆H₅N⁺H₂–AlCl₃⁻

As a result, N of aniline acquires positive charge and hence it acts as a strong deactivating group for electrophilic substitution reaction. Consequently, aniline does not undergo Friedel–Crafts reaction.

Teacher's Note: Aniline’s lone pair binds the AlCl₃ catalyst, putting a positive charge on nitrogen and deactivating the ring.

Exam Note: Mention salt formation with AlCl₃.

Question 24. Give reasons: (CH₃)₂NH is more basic than (CH₃)₃N in an aqueous solution. [CBSE Central 2016]

Solution.

This is due to combination of three factors, +ve I effect, solvation effect and steric hindrance of alkyl groups in aqueous solutions.

Teacher's Note: The secondary ammonium ion is better solvated and less crowded than the tertiary one, offsetting the extra methyl group.

Exam Note: Name inductive, solvation and steric factors.

Question 25. Give reasons: Primary amines have higher boiling point than tertiary amines. [CBSE Central 2016]

Solution.

In primary amines, two hydrogen atoms are present on N-atom and they undergo extensive intermolecular hydrogen bonding which results in association of molecules while in tertiary amines, no hydrogen atom is present on N-atom. Hence, there is no hydrogen bonding in tertiary amines. As a result of this primary amines have higher boiling point than tertiary amines.

Teacher's Note: Primary amines hydrogen-bond through their N–H groups and associate, whereas tertiary amines have no N–H to do so.

Exam Note: Link N–H hydrogen bonding with boiling point.

Question 26. Give one chemical test to distinguish between methylamine and dimethylamine. [CBSE (F) 2009]

Solution.

Methylamine on treatment with alcoholic KOH and CHCl₃ gives offensive smell of methyl isocyanide but dimethyl amine does not.

CH₃NH₂ + CHCl₃ + 3KOH (alc.) —(Heat)→ CH₃NC + 3KCl + 3H₂O

Methylamine is a 1° amine; the product methyl carbylamine has an offensive smell.

Teacher's Note: Only the primary amine, methylamine, gives the carbylamine reaction; dimethylamine, a secondary amine, gives no smell.

Exam Note: Name the carbylamine test.

Question 27. Give one chemical test to distinguish between aniline and benzylamine. [CBSE (F) 2009]

Solution.

Aniline on treatment with NaNO₂/HCl (HNO₂) at 0–5°C followed by treatment with an alkaline solution of β–naphthol gives an orange coloured azodye while benzylamine does not give this test.

C₆H₅NH₂ —(NaNO₂/HCl, 0–5°C)→ C₆H₅N₂⁺Cl⁻ —(β-naphthol, dil. NaOH)→ C₆H₅–N=N–(2-hydroxy-1-naphthyl) (orange dye)

Teacher's Note: Aromatic primary amines give stable diazonium salts that couple with naphthol to form a coloured dye, unlike benzylamine.

Exam Note: Name the azo dye test with β-naphthol.

Question 28. Give one chemical test to distinguish between ethylamine and aniline. [CBSE (F) 2009]

Solution.

On adding Br₂(aq), aniline forms white ppt. while ethyl amine does not form such ppt.

C₆H₅NH₂ + 3Br₂(aq) → 2,4,6-tribromoaniline (white ppt.) + 3HBr

Teacher's Note: The activated ring of aniline is tribrominated at once by bromine water, but ethylamine has no ring.

Exam Note: Mention the white precipitate.

Question 29. Illustrate the following reaction giving a chemical equation: Gabriel phthalimide synthesis [CBSE (F) 2011]

Solution.

Gabriel phthalimide synthesis: This reaction is used for the preparation of aliphatic primary amines. In this reaction, phthalimide is first of all treated with ethanolic KOH to form potassium phthalimide. Potassium phthalimide on treatment with alkyl halide gives N-alkyl phthalimide, which on hydrolysis with dilute hydrochloric acid gives a primary amine as the product.

Phthalimide —(KOH, alc.)→ potassium phthalimide —(R–X)→ N-alkylphthalimide —(H₂O/H⁺)→ R–NH₂ (1° amine) + phthalic acid (C₆H₄(COOH)₂)

Teacher's Note: Phthalimide’s acidic N–H is replaced by potassium, alkylated, then hydrolysed, giving only a pure primary amine.

Exam Note: Give the three steps in order.

Question 30. Illustrate the following reaction giving a chemical equation: A coupling reaction [CBSE (F) 2011]

Solution.

Coupling reaction: The reaction of diazonium salts with phenols and aromatic amines to form azo compounds of the general formula, Ar–N=N–Ar is called coupling reaction. The mechanism is basically that of electrophilic substitution where the diazonium ion is electrophile. In this reaction, the nitrogen atoms of the diazo group are retained in the product. The coupling with phenols takes place in mildly alkaline medium while with amines, it occurs under faintly acidic conditions. For example,

C₆H₅N₂⁺Cl⁻ + C₆H₅OH —(273–278 K, OH⁻, pH 9–10)→ C₆H₅–N=N–C₆H₄–OH (p-hydroxyazobenzene, orange dye) + HCl

C₆H₅N₂⁺Cl⁻ + C₆H₅NH₂ —(273–278 K, H⁺, pH 4–5)→ C₆H₅–N=N–C₆H₄–NH₂ (p-aminoazobenzene, yellow dye) + HCl

Diazonium salt of sulphanilic acid + N,N-dimethylaniline —(273–278 K, OH⁻)→ methyl orange, NaO₃S–C₆H₄–N=N–C₆H₄–N(CH₃)₂ + HCl

Coupling generally occurs at the p-position, w.r.t., the hydroxyl or the amino group, if free, otherwise it takes place at the o-position.

Teacher's Note: Coupling is electrophilic substitution by the diazonium ion; phenols need mild alkali and amines need faintly acidic medium.

Exam Note: State the pH for phenols and amines.

Question 31. Illustrate the following reaction giving a chemical equation: Hoffmann’s bromamide reaction [CBSE (F) 2011]

Solution.

Hoffmann bromamide reaction: When a primary acid amide is heated with an aqueous or ethanolic solution of NaOH or KOH and bromine (i.e., NaOBr or KOBr), it gives a primary amine with one carbon atom less.

R–CONH₂ + Br₂ + 4NaOH → R–NH₂ + Na₂CO₃ + 2NaBr + 2H₂O

C₆H₅CONH₂ + Br₂ + 4KOH → C₆H₅NH₂ + K₂CO₃ + 2KBr + 2H₂O (benzamide → aniline)

Teacher's Note: The carbonyl carbon is lost as carbonate, so the amine has one carbon fewer than the amide.

Exam Note: State that one carbon atom is lost.

Question 32. How will you convert aniline to chlorobenzene? [CBSE (F) 2013]

Solution.

C₆H₅NH₂ —(NaNO₂/HCl, 273–278 K)→ C₆H₅N₂⁺Cl⁻ (diazonium salt) —(Cu₂Cl₂/HCl)→ C₆H₅Cl (chlorobenzene)

Teacher's Note: Diazotisation followed by cuprous chloride in HCl (Sandmeyer reaction) replaces the diazonium group by chlorine.

Exam Note: Name the Sandmeyer reagent Cu₂Cl₂/HCl.

Question 33. How will you convert ethanoic acid to methanamine? [CBSE (F) 2013]

Solution.

CH₃COOH —(NH₃, Δ)→ CH₃CONH₂ —(Br₂/KOH, Hoffmann bromamide reaction)→ CH₃NH₂

Ethanoic acid → ethanamide → methanamine.

Teacher's Note: Converting the acid to its amide and applying Hofmann degradation removes one carbon to reach methanamine.

Exam Note: Name the Hoffmann bromamide step.

Question 34. How will you convert benzene diazonium chloride to phenol? [CBSE (F) 2013]

Solution.

C₆H₅N₂⁺Cl⁻ + H₂O —(boil)→ C₆H₅OH + HCl + N₂

Teacher's Note: Warming the diazonium salt with water replaces N₂⁺ by –OH, releasing nitrogen gas.

Exam Note: Mention boiling with water.

Question 35. Illustrate the following reactions: (a) Hoffmann bromamide degradation reaction. [CBSE Sample Paper 2017]

Solution.

Hoffmann bromamide reaction: When a primary acid amide is heated with an aqueous or ethanolic solution of NaOH or KOH and bromine (i.e., NaOBr or KOBr), it gives a primary amine with one carbon atom less.

R–CONH₂ + Br₂ + 4NaOH → R–NH₂ + Na₂CO₃ + 2NaBr + 2H₂O

C₆H₅CONH₂ + Br₂ + 4KOH → C₆H₅NH₂ + K₂CO₃ + 2KBr + 2H₂O (benzamide → aniline)

Teacher's Note: An acid amide plus bromine and alkali gives an amine with one carbon fewer than the amide.

Exam Note: Write the balanced general equation.

Question 36. Illustrate the following reactions: (b) Coupling reaction. (Reactions involving retention of diazo group) [CBSE Sample Paper 2017]

Solution.

Coupling reaction: The reaction of diazonium salts with phenols and aromatic amines to form azo compounds of the general formula, Ar–N=N–Ar is called coupling reaction. The mechanism is basically that of electrophilic substitution where the diazonium ion is electrophile. In this reaction, the nitrogen atoms of the diazo group are retained in the product. The coupling with phenols takes place in mildly alkaline medium while with amines, it occurs under faintly acidic conditions. For example,

C₆H₅N₂⁺Cl⁻ + C₆H₅OH —(273–278 K, OH⁻, pH 9–10)→ C₆H₅–N=N–C₆H₄–OH (p-hydroxyazobenzene, orange dye) + HCl

C₆H₅N₂⁺Cl⁻ + C₆H₅NH₂ —(273–278 K, H⁺, pH 4–5)→ C₆H₅–N=N–C₆H₄–NH₂ (p-aminoazobenzene, yellow dye) + HCl

Diazonium salt of sulphanilic acid + N,N-dimethylaniline —(273–278 K, OH⁻)→ methyl orange + HCl

Coupling generally occurs at the p-position, w.r.t., the hydroxyl or the amino group, if free, otherwise it takes place at the o-position.

Teacher's Note: Both nitrogen atoms of the diazo group are retained in the azo product, which makes coupling useful for dyes.

Exam Note: Give one coupling example with conditions.

Question 37. Write a chemical test to distinguish between aniline and methylamine.

Solution.

C₆H₅NH₂ + HONO + HCl —(273–278 K)→ C₆H₅N₂⁺Cl⁻ + 2H₂O (benzene diazonium chloride)

C₆H₅N₂⁺Cl⁻ + 2-naphthol —(dil. NaOH, pH 9–10)→ 1-phenylazo-2-naphthol (orange dye) + HCl

Aniline gives the orange dye with alkaline β-naphthol after diazotisation, whereas methylamine does not form a stable diazonium salt and gives no dye.

Teacher's Note: Only the aromatic amine gives a stable diazonium salt that couples with naphthol to produce an orange azo dye.

Exam Note: Name the reagents of the azo dye test.

Question 38. Give the structures of A, B and C in the following reactions: C₆H₅NO₂ —(Fe/HCl)→ A —(HNO₂; 273 K)→ B —(C₆H₅OH)→ C

Solution.

C₆H₅NO₂ —(Fe/HCl)→ C₆H₅NH₂ (A) —(HNO₂, 273 K)→ C₆H₅N₂⁺Cl⁻ (B) —(C₆H₅OH)→ C₆H₅–N=N–C₆H₄–OH (C)

A = aniline; B = benzene diazonium chloride; C = p-hydroxyazobenzene.

Teacher's Note: Reduction gives aniline, diazotisation gives the salt, and coupling with phenol forms the azo dye at the para position.

Exam Note: Name A, B and C.

Question 39. Give the structures of A, B and C in the following reactions: C₆H₅N₂Cl —(CuCN)→ A —(H₂O/H⁺)→ B —(NH₃; Δ)→ C

Solution.

C₆H₅N₂⁺Cl⁻ —(CuCN)→ C₆H₅CN (A) —(H₂O/H⁺)→ C₆H₅COOH (B) —(NH₃, Δ)→ C₆H₅CONH₂ (C)

A = benzonitrile; B = benzoic acid; C = benzamide.

Teacher's Note: Cyanide replaces the diazonium group, hydrolysis converts –CN to –COOH, and ammonia on heating gives the amide.

Exam Note: Name A, B and C.

Question 40. In the following pairs which one is more basic and why? (i) CH₃NH₂ or C₆H₅NH₂ (ii) CH₃NH₂ or NH₃ (iii) p-toluidine or aniline

Solution.

(i) In CH₃NH₂, the +I effect of –CH₃ group makes lone pair of electrons on N-atom more available for donation. On the other hand in C₆H₅NH₂, the resonance effect causes delocalisation of lone pair of electrons over benzene ring and makes it less available for donation. Hence, CH₃NH₂ is more basic than C₆H₅NH₂.

(ii) CH₃NH₂ is more basic than NH₃. CH₃ group due to its +ve I effect pushes electron towards nitrogen in CH₃–N̈H₂ and this makes the unshared electron pair more available for sharing with the proton of the acid.

(iii) p-Toluidine is stronger base than aniline as CH₃ group is electron releasing by +I effect and hyperconjugation effect.

Teacher's Note: Electron-donating groups raise electron density on nitrogen, so methylamine and p-toluidine are the stronger bases in each pair.

Exam Note: Give the electronic reason for each pair.

Question 41. Arrange the following compounds in increasing order of dipole moment: CH₃CH₂CH₃, CH₃CH₂NH₂, CH₃CH₂OH [NCERT Exemplar]

Solution.

CH₃CH₂CH₃ < CH₃CH₂NH₂ < CH₃CH₂OH

Teacher's Note: Dipole moment rises with the polarity of the functional group: alkane none, amine moderate, alcohol highest.

Exam Note: Order by electronegativity of the heteroatom.

Question 42. Give possible explanation: The presence of a base is needed in the ammonolysis of alkyl halides. [NCERT Exemplar]

Solution.

To remove HX formed so that the reaction shifts in the forward direction.

Teacher's Note: Ammonolysis produces HX, which would protonate the amine; a base removes it and drives the reaction forward.

Exam Note: Say the base removes HX.

Question 43. Give possible explanation: Amides are more acidic than amines. [NCERT Exemplar]

Solution.

R–C(=O)–NH₂ ↔ R–C(O⁻)=N⁺H₂

Due to +R effect, availability of lone pair of electron on N of –NH₂ group decreases. As a result, acid amide is much weaker base than amines. Because of the positive charge on N, as a result of resonance, N can easily lose a proton and behaves, as a weak acid.

Teacher's Note: Resonance with the carbonyl group puts partial positive charge on nitrogen, so an amide N–H is easier to lose.

Exam Note: Use resonance of the amide group.

Class 12 Mathematics: Xam Idea Solutions for Xam Idea Solutions Class 12 Chemistry Chapter 13 Amines Short Answer Questions II

Complete Math Solutions for Xam Idea Solutions Class 12 Chemistry Chapter 13 Amines Short Answer Questions II

Review detailed solutions for Class 12 Mathematics. The Xam Idea Solutions Class 12 Chemistry Chapter 13 Amines Short Answer Questions II PDF provides comprehensive answers mapped to standard Xam Idea Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.

Mastering Core Concepts with Xam Idea Solutions

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Explore More Study Resources for Class 12 Math

Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.

FAQs

What are these [current-page:node:field_author] Solutions for Class 12 Chemistry?

They are chapter-wise solved questions from the book for Class 12 Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 12 Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 12 Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 12 Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 12 Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.